Car Audio & Video Packages & Bundles (691)

2 Pair Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers + Metra 72-6512 Speaker Harness Connector for Chrysler Vehicles 90-07 Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each Power Handling: RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty What is in the S-S69 package: S-S69 owner's manual Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-3/16" Screws Eight M4x60mm Machine screws  Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Split lock washers 8 Spacers Warranty information Online product registration information Important Notice sheet Template and specs on the box (2) Pair of Metra 72-6512 Speaker Wire Adapters for Select Chrysler Vehicles Speaker Harness Connectors Adapters Designed For 1991-Up Chrysler Dodge Jeep Eagle Plymouth, Quick, and Easy Installation, Plug-In The Original Radio Receiver, No Cutting Into Original Wiring Required, High-Quality ABS Plastic Molded Connector For The Perfect Fit, Length: 7" Long. Compatibility List: Chrysler: 1999-2003 300M 1995-2000 Cirrus 1992-1999 Lebaron 1995-2002 LHS 1991-1996 New Yorker 1996-2003 Sebring Coupe 1995-2001 Sebring Sedan 1991-2002 Town & Country 2001-2003 Voyager Dodge: 1991-2003 Caravan 1994-1999 Dakota 1993 Daytona 1998-1999 Durango 1998-2007 Ram Pick Eagle: 1993-1997 Vision Jeep: 1997-2001 Cherokee 1997-2003 Wrangler Plymouth: 1996-2000 Breeze 1995-2001 Neon 1984-2000 Voyager ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers With METRA 72-8104 Speaker Wire Harness Connector Compatible With Toyota FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty What is in the S-S69 package: Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-3/16" Screws Eight M4x60mm Machine screws Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Split lock washers Warranty information Online product registration information Template and specs on the box S-S69 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers + Metra 72-6512 Speaker Harness Connector for Chrysler Vehicles 90-07 Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each Power Handling: RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty What is in the S-S69 package: S-S69 owner's manual Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-3/16" Screws Eight M4x60mm Machine screws  Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Split lock washers 8 Spacers Warranty information Online product registration information Important Notice sheet Template and specs on the box (2) Pair of Metra 72-6512 Speaker Wire Adapters for Select Chrysler Vehicles Speaker Harness Connectors Adapters Designed For 1991-Up Chrysler Dodge Jeep Eagle Plymouth, Quick, and Easy Installation, Plug-In The Original Radio Receiver, No Cutting Into Original Wiring Required, High-Quality ABS Plastic Molded Connector For The Perfect Fit, Length: 7" Long. Compatibility List: Chrysler: 1999-2003 300M 1995-2000 Cirrus 1992-1999 Lebaron 1995-2002 LHS 1991-1996 New Yorker 1996-2003 Sebring Coupe 1995-2001 Sebring Sedan 1991-2002 Town & Country 2001-2003 Voyager Dodge: 1991-2003 Caravan 1994-1999 Dakota 1993 Daytona 1998-1999 Durango 1998-2007 Ram Pick Eagle: 1993-1997 Vision Jeep: 1997-2001 Cherokee 1997-2003 Wrangler Plymouth: 1996-2000 Breeze 1995-2001 Neon 1984-2000 Voyager ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the  W10S4 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Important Notice! ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB12V 12" Vented Loaded Halo Enclosure with Alpine KTA-200M PowerStack Amplifier Alpine S-SB12V 12" Vented Loaded Halo Enclosure with Alpine KTA-200M PowerStack Amplifier - This bundle includes an Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure, an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, a pry kit, and an Alpine cozy. Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure UNIQUE PROLINK™ DESIGNWhen you’re looking to make a noticeable impact on your sound system, you add a subwoofer that will bring out the low ends of your music. But what if you already have a single subwoofer and still crave more bass? You could throw out your single enclosure and purchase a new dual enclosure or you can build your bass with Alpine's new ProLink™ technology. ProLink™ is unique to Alpine and allows you to link two S-SB12V enclosures together using an optional KTX-H12 Linking Kit (sold separately) to create a dual subwoofer enclosure. Now you have the flexibility in power and price to use a single subwoofer or add another subwoofer when more bass is desired. STAND OUT IN THE CROWD The Alpine Halo platform has a reputation for accessible, premium technology that modernizes the look and feel of any vehicle. Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo Display, the S-SB12V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic. The S-SB12V will not only provide a premium sound performance but also elevate the interior of the vehicle with a subwoofer enclosure you can be proud to show off. The optional mounting bracket (sold separately) KTX-H12 solution that mounts to the face of the subwoofer and links to a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. This enclosure is tuned to 36 Hz for optimized sub-bass performance. General Features: 12" ported subwoofer enclosure linkable to the second S-SB12V enclosure with the linking kit (sold separately) Kevlar-reinforced pulp cone with Santoprene rubber surround Includes S-W12D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 35 Hz Dimensions 17-inch W x 14.625-inch H X 15-inch D Authorized Internet Dealer warranty: 1 year What is in the S-SB12V package: Ported enclosure loaded with one S-W12D4 subwoofer driver Rubber flange protector Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupy the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage adapting input circuit to maintain the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M package: Alpine KTA-200M Owner's Manual Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws Two M2.6x8mm Machine screws Four 3/8" Screws Four 8" Zip Ties Owner's Manual Warranty information Online product registration information FCC Compliance Statement Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute DMR-360 Single-Din In-Dash 3.5" TFT-LCD Monitor Car Stereo DVD/CD/MP3/AM/FM Player w/ Flip Down Detachable Face & Absolute BLS-6503 6.5" speaker Absolute DMR-360 Single-Din In-Dash 3.5" TFT-LCD Monitor Car Stereo DVD/CD/MP3/AM/FM Player General Features: In-dash DVD, AM/FM, CD, MP3, WMA player with Remote Motorized, detachable face 3.5" Full color TFT-LCD display Wireless remote control included Blue button lighting Power Output: Peak: 80 watts x 4 channels RMS: 15 Watts x 4 channels CD-Text Display MP3 ID3 Tag Display (Title/Artist/Album) Authorized Internet Dealer 1-year Manufacturer's Warranty Playback and Audio Features: Playback of DVD, VCD, MPEG4, CD, CD-R, CD-RW, and MP3 PLL Synthesizer AM/FM tuner with 18FM/12 AM presets Treble, bass, balance, face, and encoder volume controls Equalizer with 5 selectable tone curves (4 Preset, 1 User) Anti-shock mechanism and ESP (Electronic Skip Protection) PAL/NTSC Compatible LO/DX & ST/MO Selector Expandability Options: 1 Set of 2V preamp outputs (subwoofer) Front-panel auxiliary input: 3.5mm (headphone jack) allows connection to portable media devices such as MP3 players, etc. Front-panel USB input allows connection to portable media devices such as MP3 players, flash drives, etc. Rear video output: RCA video Output Rear video input: RCA video Input Absolute BLS-6503 Blast Series 6.5 Inches 3 Way Car Speakers 640 Watts Max Power General Features: Absolute BLS-6503 Blast Series 6.5 Inches 3 Way Car Speakers 640 Watts Max Power Stamped Steel Basket for a Sturdy Foundation Butyl Rubber Surround Polypropylene Midrange Driver 1/2" Polyetherimide (Pei) Balanced Dome Tweeter Spade Speaker Terminals for Easy Installations 6.5 Inches 3 Way Car Speaker 640 Watts Max Power 8 Oz Magnet Structure 40mm Dome Midrange Tweeter Frequency Response: 50hz-18khz Sensitivity: 91db (1 Watt / 1meter) Impedance: 4 Ohms Grilles Included 3-Year Manufacturer's Warranty Spade Speaker Terminals for Easy Installations ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V 10" 600w S-S10D4 Subwoofer Ported Sub Enclosure Box Alpine Amp S-A60M & 4 Gauge KIT4 Amp Kit Package Includes: (1) Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine S-A60M 600-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box Alpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers. This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure. Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Alpine S-A60M 600-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. THE BETTER CHOICE IN PERFORMANCE VALUE Perfect for beginners and enthusiasts alike, the S-Series amplifiers have the technology to improve your music experience yet are still friendly on your wallet. Used in conjunction with our advanced S-Series speakers and subwoofers, they create a complete sound system that takes your in-vehicle music experience to the next level. SMALL BUT MIGHTY The S-Series amplifiers are designed to fit anywhere. Measuring at 8”, these amplifiers can be mounted under seats or behind panels. Though they sport a compact footprint on the outside, they produce impressive power on the inside. At 600 watts RMS, the S-A60M is a powerful partner to drive the versatile S-Series subwoofers. RELIABLE PERFORMANCE The S-Series amplifiers contain technology that was previously only available in our premium lineup of amplifiers, the R- and X-Series models. The S-Series models are based on Alpine’s intelligent amplifier platform that ensures superior sound reproduction and precision imaging. With an improved heat sink, and protection circuit design that eliminates thermal shut-down, your music will keep playing no matter where your drive takes you. General Features: Alpine’s Class D Amplifier Circuit CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V ≤ 1% THD+N); 600W RMS x 1 (2ohm, 14.4V ≤ 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm) THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10Hz-400Hz (+/-3 dB) Damping Factor: > 1000 Remote bass knob compatible (requires RUX-KNOB.2, sold separately) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provides optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine iLX-W670 7" Receiver Bluetooth w/Carplay/Android For 2008-2010 Chrysler 300/300CPackage Includes: (1) ALPINE iLX-W670 7" In-Dash Car Digital Media Receiver w/ Apple CarPlay/XM Ready (1) Metra 95-6511 Chrysler/Jeep/Dodge In-Dash Radio Double DIN Kit (1) Axxess XSVI-6522NAV 2007-2016 Chrysler Wire Harness Interface W/ Nav Outputs (1) Metra 40-EU10 2002-08 VW/BMW/European Aftermarket to Car Antenna Adaptor This Package Fits The Following Vehicles: CHRYSLER 200: 2011-2014 300/300C: 2008-2010 ASPEN 2008-2009 SEBRING 2007-2010 TOWN & COUNTRY 2008-UP DODGE AVENGER 2007-2014 CALIBER 2009-2012 CHALLENGER 2008-2014 CHARGER 2008-2010 DAKOTA 2008-2011 DURANGO 2008-2009 GRAND CARAVAN 2008-up JOURNEY 2009-2010* MAGNUM 2008-2009 NITRO 2007-2011 RAM 1500: 2009-2011 RAM 2500/3500: 2010-2011 RAM CHASSIS CAB 2011 JEEP COMPASS 2009-UP COMMANDER 2008-2010 GRAND CHEROKEE 2008-2010 PATRIOT 2009-UP LIBERTY 2008-UP WRANGLER 2007-UP* WRANGLER UNLIMITED 2007-UP* VW Routan 2009-2013 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the  W10S4 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Important Notice! ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine R2-W12D2 12" 750w RMS Car Subwoofers + AudioControl Bass Processor 2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response. General Features: 12" Dual 2 ohm Type-R Subwoofer Peak Power Handling: 2250watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 127 oz. Strontium ferrite segmented magnet Top-mount depth: 6-3/8" Cutout diameter: 10-7/8" Frequency Response: 24 - 200Hz Sensitivity: 84.3dB Resonance Frequency (Fs): 27Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W12D2 package: R2-W12D2 owner's manual One 12" Dual 2-ohm voice coil subwoofer Two 3" jumper cables R-Series Subwoofer Application Guide Online product registration information Warranty Information https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.