00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PAC SWI-CP2 Steering Wheel Control Interface retain factory steering wheel Adapter
$79.99
$199.99
PAC SWI-CP2 Steering Wheel Control Interface retain factory steering wheel audio controls
Control functions such as volume, mode, and track on most Pioneer, Sony, JVC, Alpine, Clarion, Kenwood, Blaupunkt, Jensen, Dual, Advent, OEM, Valor, and Visteon radios equipped with a wired remote control input.
Retains steering wheel control functions when replacing the factory radio
Retains programming even if the vehicle's battery is disconnected
General Features:
Quick and easy pre-programmed button function by DIP switch selection
Works on Analog (resistive) and Data SWC systems
For vehicles with CAN-Bus, GMLAN, CLASS II, LIN-Bus, I-BUS, or analog SWC
Supports classic, SWI-RC style button programming
Customizable button functions (short press/long press/button reassignment)
Provides 2 amp, 12volt accessory output (CAN-Bus, LAN, and Class II applications)
Compatible with all late-model brands of radios with 3.5mm or two-wire connections
The aftermarket radio MUST be equipped with a wired remote input (3.5mm headphone style jack or Blue/Yellow wire) to be compatible (ex. a port or wire on the back of the radio labeled W/R, REM, Wired Remote, Remote, Rem Cont, etc.). If the radio does not have a wired remote input, you will need to use the SWI-X.
Not compatible with Kenwood models: KDC-X598, KDC-BT318U, KDCBT-758-HD, KDCBT-558U & KDC-X798. These models must be used with the SWI-CP5.
Clarion model CZ500 does not support remote Bluetooth controls
JVC model numbers KW-NT1 and KW-NT3HDT do not support Presets Up and Down from steering wheel controls
Pioneer AVIC-Fxxx radios do not interpret radio preset-seeking commands. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer.
Pioneer radios with Bluetooth features, the steering wheel controls will not adjust the phone call volume. The phone call volume must be adjusted on the face of the radio. This is a limitation of the radio, not the SWI-RC. There is no correction for this unless it comes from Pioneer.
Only the AVIC-Z110BT, Z120BT, Z130BT, Z140BH, and the AVIC-X920BT, X930BT, and X940BT will support the Voice Recognition function via wired remote input.
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Focusrite Scarlett Solo Studio 3G USB Audio Interface System with MR DJ Desktop Tripod Mic Stand Package
$269.99
$379.99
Focusrite Scarlett Solo Studio 3G USB Audio Interface System with MR DJ Desktop Tripod Mic Stand Package
Scarlett Solo studio provides singer-songwriters with the simplest all-in-one solution for a reassuringly easy recording process. Right out of the box you get a Scarlett Solo USB Audio Interface, condenser microphone, 3-meter XLR microphone cable, closed-back headphones, and free software to start making music in no time.
The Scarlett Solo features a single upgraded third-generation Scarlett mic preamp: with an optional air setting to reproduce the air effect of Focusrite's original ISA mic preamp, giving your vocal recordings a brighter and more Open sound. The cm25 MKIII condenser microphone enables you to capture studio-quality recordings that are faithful to the original source, while the HP60 MKIII closed-back headphones offer high sound quality and long-lasting comfort when recording and mixing.
Simply plug your guitar or bass into the high-headroom instrument input and start recording without any clipping or unwanted distortion, and keep an eye on your input level with intuitive gain Halo metering. Equipped with 24-bit/192kHz AD-DA converters, Scarlett S has the same professional sound quality throughout the 3rd Gen range, and Scarlett Solo's balanced outputs are hum-free when connecting studio monitors with balanced inputs, so you’ll always have pristine audio playback.
And the Solo is designed to stand up to days on the road, connecting straight to your Mac or PC via USB cable. Your Scarlett Solo studio pack comes with all the software tools you need to get started, including two comprehensive digital audio workstations: Ableton Live Lite and Pro Tools First Focusrite creative pack. Intuitive enough for beginners yet advanced enough to inspire real creativity with great-sounding effects.
Focusrite has partnered with Splice to give 3rd Gen. Interface owners a free month Splice sounds subscription when setting a new Splice account. Splice sounds offer millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily. Interested in what headphones are compatible with Scarlett? Search 'Headphones' on the Focusrite help center for more information
General Features:
Connectivity: USB Type-C
Protocol: USB 2.0
Form Factor: Desktop
Simultaneous I/O: 2 x 2
A/D Resolution: 24-bit/192kHz
Number of Preamps: 1
Phantom Power: YES
Instrument Inputs: 1
Line Inputs: 1
Analog Outputs: 2 TRS
Headphone Outputs: 1
Bus Powered: YES
Included Software
Ableton Live Lite music making software
Pro Tools | First Focusrite Creative Pack
Free 3-month Splice Sounds subscription with new Splice accounts
Focusrite Red 2 & Red 3 Plug-In Suite
A choice of 1 of 4 XLN Audio Addictive Keys virtual instruments
Softube Time & Tone Bundle
Access to the Focusrite Plug-in Collective
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Focusrite Scarlett Solo Studio 3rd Gen USB Audio Interface and Recording Bundle with Microphone, Headphones, XLR Cable, MR DJ Studio Stand, Shock Mount and Pop Filter (7 Items)
$269.99
$379.99
Focusrite Scarlett Solo Studio (3rd Gen) USB Audio Interface and Recording Bundle with Pro Tools Bundle with Microphone, Headphones, XLR Cable, MR DJ Studio Stand, Shock Mount, and Pop Filter (7 Items)
Scarlett Solo studio provides singer-songwriters with the simplest all-in-one solution for a reassuringly easy recording process. Right out of the box, you get a Scarlett Solo USB Audio Interface, condenser microphone, 3-meter XLR microphone cable, closed-back headphones, and free software to start making music in no time.
The Scarlett Solo features a single upgraded third-generation Scarlett mic preamp: with an optional air setting to reproduce the air effect of Focusrite's original ISA mic preamp, giving your vocal recordings a brighter and more Open sound. The cm25 MKIII condenser microphone enables you to capture studio-quality recordings faithful to the source. At the same time, the HP60 MKIII closed-back headphones offer high sound quality and long-lasting comfort when recording and mixing.
Plug your guitar or bass into the high-headroom instrument input and start recording without any clipping or unwanted distortion. Keep an eye on your input level with intuitive gain Halo metering. Equipped with 24-bit/192kHz AD-DA converters, Scarlett S has the same professional sound quality throughout the 3rd Gen range. Scarlett Solo's balanced outputs are hum-free when connecting studio monitors with balanced inputs, so you’ll always have pristine audio playback.
And the Solo is designed to stand up to days on the road, connecting straight to your Mac or PC via a USB cable. Your Scarlett Solo studio pack comes with all the software tools you need to get started, including two comprehensive digital audio workstations: Ableton Live Lite and Pro Tools First Focusrite creative pack. Intuitive enough for beginners yet advanced enough to inspire real creativity with great-sounding effects.
Focusrite has partnered with Splice to give 3rd Gen. Interface owners a free month Splice sounds subscription when setting up a new Splice account. Splice sounds offer millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily. Interested in what headphones are compatible with Scarlett? Search 'Headphones' on the Focusrite help center for more information
General Features:
Connectivity: USB Type-C
Protocol: USB 2.0
Form Factor: Desktop
Simultaneous I/O: 2 x 2
A/D Resolution: 24-bit/192kHz
Number of Preamps: 1
Phantom Power: YES
Instrument Inputs: 1
Line Inputs: 1
Analog Outputs: 2 TRS
Headphone Outputs: 1
Bus Powered: YES
Included Software
Ableton Live Lite music-making software
Pro Tools | First Focusrite Creative Pack
Free 3-month Splice Sounds subscription with new Splice accounts
Focusrite Red 2 & Red 3 Plug-In Suite
A choice of 1 of 4 XLN Audio Addictive Keys virtual instruments
Softube Time & Tone Bundle
Access to the Focusrite Plug-in Collective
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Focusrite Scarlett Solo 4th Gen 2x2 USB Audio Interface With Single Microphone Preamp
$179.99
$299.99
Focusrite Scarlett Solo 4th Gen 2x2 USB Audio Interface With Single Microphone Preamp, 4th Generation
Scarlett 2i2 offers advanced features for better recordings every time. It includes two ultra-low-noise mic pres, studio-grade converters with a 120 dB dynamic range, and 69 dB analog gain for quick level adjustments. The recording toolkit includes Pro Tools Artist, Ableton Live Lite, and Hitmaker Expansion software bundle. Air mode captures prominent studio console characters. It features a powerful headphone output with independent volume control. Personalized Easy Start, 24/7/365 Support, and a three-year warranty ensure readiness whenever needed.
General Features:
Ableton Live Lite
Three Month Avid® Pro Tools® Artist Subscription with Complete Plugin Bundle
Splice Sounds
Antares® Auto-Tune® Access
Softube® Marshall® Silver Jubilee 2555
Native Instruments® MASSIVE
Landr Studio, plus five free masters
Brainworx® Bx_console Focusrite SC
Focusrite Red 2 & 3 Plug-in Suite
XLN Audio® Addictive Keys
XLN Audio® Addictive Drums 2: Studio Rock
Relab’s LX480 Essentials
FAST Balancer
Scarlett Solo 4th Gen.
USB A-C Cable
Ultra-low-noise mic pre
Hi-Z instrument input
Huge 120 dB dynamic range
Air Mode for studio console character
Dynamic Gain Halos for easy level adjustments
Custom-designed headphone amp
Loopback for computer audio sampling
Focusrite's Easy Start tool
Software bundle with Ableton Live Lite, Avid Pro Tools Artist, and Hitmaker Expansion.
Control session with Focusrite Control
Three-year warranty and 24/7 support
Number of Microphone Preamps: 1
Phantom Power: Yes
Instrument Inputs: 1
Line Inputs: 1
Air Mode: Yes
Line Outputs: 2
Headphone Outputs: 1
Loopback: Yes
Connectivity: USB Type-C
Protocol: USB 2.0
Form Factor: Desktop
Simultaneous I/O: 4 x 2 (including Loopback inputs)
A/D Resolution: 24-bit / 192 kHz
Bus Powered: Yes (900 mA)
Software Compatibility
Scarlett Solo is class-compliant, so it will work with any modern Mac, Windows PC, or USB-C iPad.
USB-3.0 Bus power 5 V @ 900 mA 4.5 W
External power supply (not included) - 5 V @ 1000 mA
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
AXSWC Axxess Universal Steering Wheel Control Interface Alpine Kenwood Pioneer
$89.99
$99.99
Metra Axxess AXSWC Universal Steering Wheel Control Interface AXSWC One Interface to Control Them AllFinally, a simple solution to retaining the steering wheel controls of a vehicle when installing an aftermarket stereo—introducing the Axxess ASWC from Metra Electronics. This universal steering wheel interface is brand new and designed to simplify the installer's life. Unlike other steering wheel interfaces, the ASWC-1 requires no manual programming. After making all the proper connections, this interface will automatically program itself with the new stereo and the vehicle—no more tedious programming of each button. The ASWC-1 has an LED status light that will flash according to the programming and inform you when the sync is done. It is simple. Just plug it in, and you are ready to go! Now installations can be faster, easier, and simpler! If you still prefer to program manually, Axxess has left that option.Ready for Any Aftermarket StereoNo matter what type of vehicle or aftermarket stereo you plan to install, the ASWC-1 has you covered! It is fully compatible with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, and more. As long as the stereo has a wired steering wheel remote connection, the ASWC-1 will connect and interface with the vehicle. Plus, the Metra ASWC-1 can be updated. This means that the interface will never be outdated. For the simplest way to retain the steering wheel control in your car, choose the Axxess ASWC-1!General Features:
Universal Steering Wheel Control Interface for Aftermarket Receivers
Model: AXSWC
Does not require any programming
Works with the 2013 Nissan Altima sedan
A car stereo requires a wired steering wheel remote input
Can be manually programmed to function the way that the user wants the device to function
Designed for use with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, Clarion, Jensen, Dual, Power Acoustik, Soundstream, Valor, Visteon, and more. (Contact us with your model if we didn’t list it.)
Automatically detects the vehicle OEM interface and will program itself to it
Automatically detects the aftermarket radio and sets the steering wheel control functions
The ASWC-1 programs itself to the components it is being installed with
New LED with dual colors to make it easier to read the diagnostic feedback
Updatable with a micro "B" connector (Metra update cable part number USB-MINI-CAB)
The fastest and easiest way to retain steering wheel controls when installing an aftermarket stereo
Included in Package:
AXSWC Interface
12 Pin Harness with Male 3.5mm Connector
Female 3.5mm connector with brown and brown/white wires
12K Ohm Resistor
Installation Manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ART Audio P16 Rackmount 16-Ch Balanced XLR Patch Bay Passive Interface Patchbay
$99.99
$199.99
ART Audio P16 Rackmount 16-Ch Balanced XLR Patch Bay Passive Interface Patchbay
Ideal for any live PA rack, studio rack, or fixed installation where easy access to XLR inputs is required, the P16 brings all rear-mounted XLR inputs from various devices to one convenient, single-space rack-mountable location. By bringing all commonly used connections to the external patch bay, the P16 saves wear and tear on the connectors of expensive audio equipment.All-steel chassis, black anodized finish, and secure, high-quality XLR connections front and back with internal connections made via PCB wiring ensure long-term reliability from the passive ART P-16 Balanced XLR rackmount patch bay.General Features:
16 channels of balanced direct signals
High-quality passive interface
XLR connectors (female on the front, male on rear)
All connections made via reliable PCB wiring
19-inch 1U-high rack mount with rugged fully shielded black all-steel enclosure
Reversible rack ears for added system flexibility
Three-year warranty
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ART P16 Rackmount Balanced XLR Patch Bay
$99.99
$199.99
ART Audio P16 Rackmount 16-Ch Balanced XLR Patch Bay Passive Interface Patchbay
Ideal for any live PA rack, studio rack, or fixed installation where easy access to XLR inputs is required, the P16 brings all rear-mounted XLR inputs from various devices to one convenient single-space rack-mountable location. The P16 saves wear and tear on the connectors of expensive audio equipment by bringing all commonly used connections to the external patch bay.All-steel chassis, black anodized finish, and secure, high-quality XLR connections front and back with internal connections made via PCB wiring ensure long-term reliability from the passive ART P-16 Balanced XLR rackmount patch bay.General Features:
16 channels of balanced direct signals
High-quality passive interface
XLR connectors (female on the front, male on the rear)
All connections are made via reliable PCB wiring
19-inch 1U-high rack mount with rugged, fully shielded black all-steel enclosure
Reversible rack ears for added system flexibility
Three-year warranty
Connectors: Balanced XLR (female front, male rear)
CMRR: > -95 dB (typical)
Channel to Channel Isolation: > -95 dB (typical)
Enclosure: Steel 1U high, 19" rack mount
Dimensions (HWD): 1.75” x 19” x 3.5”
Weight: 3.2 lbs
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Metra 95-6518B Double DIN Stereo Installation Dash Kit for 2013 Dodge Ram & XSVI-6523-NAV Interface
$159.99
$249.99
2013 - 2017 RAM Double Din Car Stereo Installation Dash Kit +Harness +Antenna
RAM 2013 & UP WITHOUT 8" SCREENCHEROKEE SPORT 2014 & UPCHRYSLER 200LX 2015 & UP WITH 3" SCREENMetra 95-6518B Double DIN Installation Kit for Dodge RAM 1500, 2500 & 3500 2013-Up Trucks
General Features:Allows the user to install an aftermarket Double DIN car stereo without leaving any gap between the dash and the kitFinished in scratch-proof matte blackPainted and textured to match the factory-installed interiorDesigned and manufactured with excellent precision tolerancesDouble DIN Installation Kit for Dodge RAM 1500, 2500 & 3500 2013-Up Trucks without factory-installed 8.4" screenMetra XSVI-6523-NAV 2013 - and Up Chrysler CAN Bus interface with Navigation outputsInterchangeable Part Number: AXDI-CH5
Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2013 - and up CAN-Bus Chrysler vehicles.Provides accessory output for data bus signals (12-volt 10-amp capable output)Retains R.A.P. (retained accessory power) while doors remain closed, so you can continue to listen to the radio until doors openThe interface is designed to be used with factory-amplified or non-amplified audio systemsRetains backup camera (if through the OE radio)Retains the use of the 3.5mm AUX jackMetra 40-EU55 for Volkswagen - BMW - European 2002 and Newer Antenna AdapterAntenna Adapter Cable
Powered antenna and newer "FACRA" style connector to aftermarket radioCompatibility List:Chrysler:
2015 - 2016 2001
Dodge:
2013 - 2016 Dart2
Fiat:
2014 - 2016 500L
2016 500X
Jeep:
2014 - 2016 Cherokee Sport
2015 - 2016 Renegade
RAM Truck:
2013 - 2016 1500/2500/35003
2013 - 2016 Chassis Cab 3500/4500/55003
2014 - 2016 Promaster4
2015 - 2016 Promaster City
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
METRA Bundle Compatible with 2013-2017 Ram 1500/2500/3500 Double DIN Radio Provision Matte Black Color with LC-CHRC-01 Interface Wire Harness and 40EU55 Antenna Adapter
$159.99
$249.99
2013 - 2017 RAM Double Din Car Stereo Installation Dash Kit +Harness +Antenna
RAM 2013 & UP WITHOUT 8" SCREENCHEROKEE SPORT 2014 & UPCHRYSLER 200LX 2015 & UP WITH 3" SCREENMetra 95-6518B Double DIN Installation Kit for Dodge RAM 1500, 2500 & 3500 2013-Up Trucks
General Features:Allows the user to install an aftermarket Double DIN car stereo without leaving any gap between the dash and the kitFinished in scratch-proof matte blackPainted and textured to match the factory-installed interiorDesigned and manufactured with excellent precision tolerancesDouble DIN Installation Kit for Dodge RAM 1500, 2500 & 3500 2013-Up Trucks without factory-installed 8.4" screenMetra XSVI-6523-NAV 2013 - and Up Chrysler CAN Bus interface with Navigation outputs
Interchangeable Part Number: AXDI-CH5
Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2013 - and up CAN-Bus Chrysler vehiclesProvides accessory output for data bus signals (12-volt 10-amp capable output)Retains R.A.P. (retained accessory power) while doors remain closed, so you can continue to listen to the radio until doors openThe interface is designed to be used with factory-amplified or non-amplified audio systemsRetains backup camera (if through the OE radio)Retains the use of the 3.5mm AUX jackMetra 40-EU55 for Volkswagen - BMW - European 2002 and Newer Antenna AdapterAntenna Adapter Cable
Powered antenna and newer "FACRA" style connector to aftermarket radioCompatibility List:Chrysler:
2015 - 2016 2001
Dodge:
2013 - 2016 Dart2
Fiat:
2014 - 2016 500L
2016 500X
Jeep:
2014 - 2016 Cherokee Sport
2015 - 2016 Renegade
RAM Truck:
2013 - 2016 1500/2500/35003
2013 - 2016 Chassis Cab 3500/4500/55003
2014 - 2016 Promaster4
2015 - 2016 Promaster City
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Heise AXDIS-MB132 02-11 Compatible MB Interface W/SWC
$399.99
$699.99
Axxess AXDIS-MB132 Compatible Fits Mercedes CLS/E/SLK with MOST25 Amp SWC Retention 2002-2011
General Features:
Provides accessory power.
Designed for amplified models.
Provides NAV outputs (parking brake, reverse, speed sense).
Retains audio controls on the steering wheel.
Retains balance
Micro-B USB updatable
Authorized Internet Dealer
1-year Manufacturer's Warranty
Applications:
Mercedes
CLS (W211) 2006-2011
E-Class (C219) 2003-2008*
SLK (R171) 2005-2008*
*There are two different radio possibilities for the E-Class or SLK in this year's range,
Please see below for guidance on determining which interface kit you will need.
*Vehicles equipped with Command NTG1 will use the AXDIS-MB132. Harman/Becker will build NTG1 radios and have the 6-disc Changer separate from the radio. If equipped with a SINGLE-disc player, it will be built into the radio. They will typically have buttons on the sides of and below the radio screen. Additionally, the optical light will be visible when the fiber cable is removed.
* Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. Alpine will build NTG2.5 radios, which will have the 6-disc changer built into them. The buttons will not be directly below the radio screen, and the optical light will come from the radio when the fiber cable is removed.
Mercedes
CLS (W211) 2006-2011
E-Class (C219) 2003-2008*
SLK (R171) 2005-2008*
*There are two radio possibilities for the E-Class or SLK in this year's range; please see below for ways to distinguish which interface kit you need.
*Vehicles equipped with Command NTG1 will use the AXDIS-MB132. Harman/Becker will build NTG1 radios and have the 6-disc Changer separate from the radio. If equipped with a SINGLE-disc player, it will be built into the radio. They will typically have buttons on the sides of and below the radio screen. Additionally, the optical light will be visible when the fiber cable is removed.
* Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. Alpine will build NTG2.5 radios and have the 6-disc changer built into them. They will not have buttons directly below the radio screen; the optical light will come from the radio when the fiber cable is removed.
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Axxess AXDIS-MB132 Fits Mercedes CLS/E/SLK with MOST25 Amp SWC Retention 02-11
$399.99
$699.99
Axxess AXDIS-MB132 Compatible Fits Mercedes CLS/E/SLK with MOST25 Amp SWC Retention 2002-2011
General Features:
Provides accessory power.
Designed for amplified models.
Provides NAV outputs (parking brake, reverse, speed sense).
Retains audio controls on the steering wheel.
Retains balance
Micro-B USB updatable
Authorized Internet Dealer
1-year Manufacturer's Warranty
Applications:
Mercedes
CLS (W211) 2006-2011
E-Class (C219) 2003-2008*
SLK (R171) 2005-2008*
*There are two different radio possibilities for the E-Class or SLK in this year's range; please see below for ways to distinguish which interface kit you will need.
*Vehicles equipped with Command NTG1 will use the AXDIS-MB132. Harman/Becker will build NTG1 radios and have the 6-disc Changer separate from the radio. If equipped with a SINGLE-disc player, it will be built into the radio. They will typically have buttons on the sides of, and below, the radio screen. Additionally, the optical light will come from the fiber cable when removed.
* Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. Alpine will build NTG2.5 radios, which will have the 6-disc changer built into them. The buttons will not be directly below the radio screen, and the optical light will come from the radio when the fiber cable is removed.
Mercedes
CLS (W211) 2006-2011
E-Class (C219) 2003-2008*
SLK (R171) 2005-2008*
*There are two radio possibilities for the E-Class or SLK in this year's range; please see below for ways to distinguish which interface kit you need.
*Vehicles equipped with Command NTG1 will use the AXDIS-MB132. NTG1 radios will be built by Harman/Becker and have the 6-disc Changer separate from the radio. If equipped with a SINGLE-disc player, it will be built into the radio. They will typically have buttons on the sides of and below the radio screen. Also, the optical light will come from the fiber cable when removed.
* Vehicles equipped with Command NTG2.5 will use the AXDIS-MB82. Alpine will build NTG2.5 radios, which will have the 6-disc changer built into them. The buttons will not be directly below the radio screen, and the optical light will come from the radio when the fiber cable is removed.
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PreSonus AudioBox USB 96 25th Anniversary Edition with Studio One Artist and Ableton Live Lite DAW Recording Software
$99.99
$189.99
PreSonus AudioBox USB 96 25th Anniversary Edition with Studio One Artist and Ableton Live Lite DAW Recording Software
Start recording and creating original music with a PreSonus AudioBox USB 96 audio interface. This compact, convenient, and super-affordable 2-channel USB 2.0 audio interface is an ideal option for singer/songwriters and any creative artists looking for an easy way to record at home or on the road. Take advantage of the award-winning sound of a pair of top-quality PreSonus preamps to bring your vocals, guitar, and other instruments to life, all captured in up to 24-bit/96kHz professional digital audio resolution. What's more, your AudioBox USB 96 comes complete with PreSonus's Studio One Artist DAW software and over 6GB of bonus content, making it an exceptionally value-packed system.
PreSonus AudioBox USB 96 Audio Interface Features: Value-packed 2-channel USB 2.0 interface for personal and portable recording Records at up to 24-bit/96kHz professional-standard digital resolution Dual preamplifiers with combo inputs let you record microphone- and instrument-level audio Onboard +48-volt phantom power accommodates studio condenser microphones Internal analog mixer lets you blend direct input and playback signal for latency-free monitoring Mobile-friendly USB bus power means there's no need to carry an additional power supply Compatible with nearly any recording software on Mac or Windows operating systems Includes PreSonus Studio One Artist DAW software and over 6GB of third-party content Packaged with the complete Studio Magic Plug-in Suite — a collection of awesome plug-in emulations of classic studio gear 2 dual-purpose front-panel input channels, each with high-quality mic preamplifiers 2 combo mic/instrument inputs Individual channel-trim controls with 0 to +35 dBu mic gain range 48V phantom power for condenser microphones Mixer control (blends the input signal with the computer playback stream for zero-latency monitoring) Headphone jack with level control Main-output level control LED clip indicator for each channelInput/Output 1 USB 2.0 port 2 combo XLR/¼-inch mic/instrument inputs 2 balanced ¼-inch main (L/R) line outputs 1 stereo ¼-inch headphone output MIDI In/OutDigitalia 24-bit resolution and 44.1, 48, 88.2, and 96 kHz sampling rate Professional-grade A/D/A converters (+105 dB dynamic range) Zero-latency monitoring via internal mixer Compatible with most Mac® and Windows® recording softwareIncluded Software Studio One® Artist Studio Magic Software Suite Ableton® Live LitePhysical 1/3U rack-mountable (with optional 3UMR rack-mounting system) Road-rugged construction with all-metal chassis and metal knobs Weighs just 5 lbs (2.3 kg) Powered via USB bus—no wall wart!
Computer system requirements:Below are the minimum computer-system requirements for AudioBox USB 96.macOS® macOS version 10.13 or later 200 MB storage space and 4 GB RAM for Universal Control (required for firmware updates) Available USB portWindows® Windows 10 or later (64-bit Only) 200 MB storage space and 4 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support) Available USB port
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.