Alpine (849)

Alpine KCX-C2600B Universal Front and Rear Camera Selector Easily control your single view camera or Alpine direct multi-view cameras with the KCX-C2600B Front and Rear Camera Switcher. Use the two-button controller to choose the desired camera and toggle through the various viewing modes from the camera (when connected to a multi-view camera). The controller can be mounted on your dashboard for easy access. The KCX-C2600B features two direct inputs for the front and rear cameras, and one RCA input for a non-Alpine rear camera. It also has one universal RCA output for other display devices such as a factory screen (third-party factory camera interface required). General Features: Control module for multiple camera systems Recommended cameras include the Alpine HCE-C2100RD Front and rear view cameras connect into one module Connect two multi-view cameras to screens with the RCA input Included switch allows selection of viewing modes Supports power supply for direct cameras Also found as: Dimensions: 3.9"W x 1.9"D x .9"H Authorized Internet Dealer 1-year Warranty Output Image: Normal image, NTSC Video signal 16:9 Image output for wide-screen Image Output impedance: 75 Ohm (1Vp-p) Power Requirement: 12 V.DC Negative Ground Power Consumption: Less than 1.7W (12V) Operating Temperature: -30°C - +80°C What's in the box: Alpine KCX-C2600B owner's manual Dual multi-camera selector interface module (attached 6.5' power/ground/reverse-in wires and 19.5' reverse out wire) Controller (attached 9.75' cable) 6.5' Composite video cable 3 Self-adhesive clips 2 Hook-and-loop strips Two-sided tape ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine KTX-C10LP License Plate Mounting Kit This product is solely the mounting kit. This package does not include the backup camera, which is required and sold separately. General Features: Alpine KTX-C10LP License Plate Mounting Kit Works with select Alpine rear-view cameras Easy to install Constructed from a rigid, sturdy cast metal frame Built-in LED’s illuminate your plate for added safety Connect to any in-dash monitor or AV head unit with auxiliary input Convenient camera view provides protection when backing up Compatible with Alpine HCE-C105 and Alpine HCE-C107D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: License plate frame mount Camera mounting bracket 4 Self-tapping screws 4 Hex-head screws 4 Large machine screws with flat and lock washers installed 4 Small machine screws Hex key Installation Manual Alpine KTX-C10LP owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off. EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. General Features: Complete Direct Fit Audio System Upgrade Compatible with 2018 - Up Jeep Wrangler Unlimited JL Compatible with models that don't have a factory-amplified system All installation hardware, such as speaker adapters and amplifier wiring, included CEA-2006 Compliant System 300 Watt RMS sound system The system consists of: 8" Powered Subwoofer Universal Power Pack Amplifier 2" Component Tweeters Tweeter Adapters Authorized Dealer 1-year Manufacturer's Warranty PWE-S8 Subwoofer Features: Peak: 240 watts RMS: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H KTP-445U Amplifier Features: RMS Power Rating: 4 ohms: 45 watts x 4 Channel 2 ohms: 45 watts x 4 Channel 4 ohms: 90 watts x 2 Channel (Bridged) Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of any head unit without having to install a full-size amplifier and amp install kit The Independent front/Rear gain switch is adjustable from high to low Runs off the receiver's power circuit High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave Fast and simple installation 4-channel operation for four speakers Minimum impedance of 2 ohms Frequency response: 20-20,000 Hz Fuse Rating: 15A x 1 SPR-10TW Component Tweeters: 2" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Vehicle Compatibility: JEEP 2018 - Up Wrangler Unlimited JL Compatible with Wrangler JL Models that don't have a factory amplified system What's in the box: KTP-445U amplifier PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket) 7' Signal harness 12' Loomed power wire w/ inline 20A fuse 52-Pin t-harness Four 10" speaker to RCA harnesses Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers Remote bass-level control w/ attached 16' cable 3" Strip of hook-and-loop fastener Ten 6" wire-ties 1/2" Self-tapping screw Star-washer 2 Alpine logos Installation guide Warranty sheet Alpine PSS-23WRA owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-22WRA Compatible Fit Jeep Wrangler JK Unlimited Weather-Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources ideally suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and soundbar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for astonishing clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations, and in the case of the two amps, all wiring is included, complete with factory-compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:Compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectors included, SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors Included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the box: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-22WRA Compatible Fit Jeep Wrangler JK Unlimited Weather-Resistant Upgrade SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Good times in your Wrangler Unlimited are about to get better. Alpine's Restyle PSS-22WRA speaker system takes the guesswork out of installation with nine direct-fit speakers and power sources ideally suited for your Jeep Wrangler JK Unlimited (not compatible with premium sound systems). Alpine has also designed this weather-proof system to endure the environmental harshness of life in your Jeep, even when the top is off. Get ready to rock the great outdoors.The soundAlpine supplies everything you need to revitalize the sound in your Wrangler. You'll get two 6-1/2" component systems with 1" dome tweeters for the front and soundbar locations in your Jeep. Alpine lets you convert these components to a coaxial design if called for in your JK Unlimited. The included weather-resistant Tough Pack 4-channel amp ups your power for astonishing clarity at all volumes — a must for top-down drivers. Alpine also gives you a 10" enclosed under-seat subwoofer and a Tough Pack mono amp for some whoppin' bass. The fitAlpine designed the Restyle line for drivers who want to improve their sound but want to maintain the factory look of their vehicle. The PSS-22WRA sound system upholds this approach by including tweeter mounting gear suitable for a variety of locations. The woofers fit directly into your factory locations, and in the case of the two amps, all wiring is included, complete with factory-compatible plugs. Once the PSS-22WRA system goes in, you won't even know it's there... until you crank up the volume.READ LESSProduct highlights:Compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems)package includes:two sets of SPV-65X-WRA 6-1/2" component speakersweather-resistant Tough Pack KTA-30F-WRA 4-channel amplifierweather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knobSBV-10-WRA 10" enclosed submounting gear, wiring, and connectors included, SPV-65X-WRA speakers can be configured for component or coaxial use General Features: Alpine PSS-22WRA Audio Restyle for Jeep Wrangler Unlimited JK Includes speakers, tweeters, a powered subwoofer, and two amplifiers Fully Waterproof Plug-and-Play Package Specifically designed for 2007-2018 four-door Jeep Wrangler Unlimited Vehicles Authorized Internet Dealer compatible with select 2011-18 Jeep Wrangler JK Unlimited models (not compatible with premium sound systems) package includes: two sets of SPV-65X-WRA 6-1/2" component speakers weather-resistant Tough Pack KTA-30F-WRA 4-channel amplifier weather-resistant Tough Pack KTA-30M-WRA mono amplifier with the remote bass knob SBV-10-WRA 10" enclosed sub mounting gear, wiring, and connectors Included SPV-65X-WRA speakers can be configured for component or coaxial use What's in the box: SPV-65X-WRA x 2, KTA-30F-WRA, KTA-30M-WRA, SBV-10-WRA Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier + Absolute KIT4 4 Gauge Amp Kit Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for its class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protection (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine Front+Rear Car Camera w/License Plate Bracket+Switch Multi-View Selector Package Includes: (1) Alpine KCX-C2600B Single Monitor Front+Rear Camera Selector w/Switch View Button (1) Alpine HCE-C2600FD Weather Resistant Multi-View Front Car Camera (1) Alpine HCE-C1100 Rear View Backup HDR Car Camera w/Direct/Universal Connections (1) Alpine KTX-C10LP License Plate Rear Camera Mounting Kit For Select Backup Cams Authorized Alpine Dealer! Alpine KCX-C2600B General Features: dual-camera selector interface for use with aftermarket cameras and receivers enhanced for use with Alpine Direct cameras two proprietary inputs: compatible with two Alpine Direct cameras one RCA input for use with a non-Alpine multi-view camera select camera view from included remote includes required video and power cables warranty: 1 year What is in the KCX-C2600B package: KCX-C2600B owner's manual A dual multi-camera selector interface module Controller 6.5' Composite video cable 3 Self-adhesive clips 2 Hook-and-loop strips Two-sided tape Alpine HCE-C2600FD General Features: front-view camera High Dynamic Range technology for more detail in light and dark conditions 1/4" CMOS image sensor with approximately 1.2-megapixel resolution color video output three viewing angles 180° horizontal and 125° vertical viewing angles 1.5 Lux minimum for night driving IP 68 weather-proof camera housing universal mounting hardware and power/video cable included for use with a compatible Alpine car stereo or a KCX-C250MC multi-camera selector connected to an Alpine car stereo compatible with Alpine's KTX-C10LP license plate camera mounting kit (not included) warranty: 1 year What is in the HCE-C2600FD package: HCE-C2600FD owner's manual Front-view camera 10' Power/Video harness 2-Piece mounting bracket 4 Machine screws 4 Self-tapping screws 5 Wire-clips Alpine HCE-C1100 Universal backup camera surface-mount Back up betterAlpine's HCE-C1100 backup camera is an excellent add-on when buying a new touchscreen car stereo. With low light capability and a wide viewing angle, you'll have a perfect picture of what's behind your vehicle, day or night.This tiny camera measures less than one square inch, so it'll fit just about anywhere. The package includes a 21-foot cable with composite video RCA plugs that allows the camera to connect to any in-dash receiver or front-mount screen with a composite video input.Frame itGeneral Features: backup camera with standard composite (RCA) video cable mounting hardware and 21-foot power/video cable included compatible with any radio with an RCA video input (most aftermarket models, only a few factories) 1/4" CMOS image sensor color video output illumination range: 1.5 to 100,000 lux weather-proof camera housing warranty: 1 year MFR # HCE-C1100 What's in the HCE-C1100 package: HCE-C1100 owner's manual Rearview camera (attached 5' power/ground cable) 23' Composite video cable Mounting bracket Hex-key Rubber sleeve 4 Large screws 2 Small screws Owner's Manual Alpine KTX-C10LP License Plate Mounting Kit General Features: Alpine KTX-C10LP License Plate Mounting Kit Works with select Alpine rear-view cameras Easy to install Constructed from a rigid, sturdy cast metal frame Built-in LEDs illuminate your plate for added safety Connect to any in-dash monitor or AV head unit with auxiliary input Convenient camera view provides protection when backing up Compatible with Alpine HCE-C105 and Alpine HCE-C107D Authorized Dealer 1-year Manufacturer's Warranty What's in the KTX-C10LP package: KTX-C10LP owner's manual License plate frame mount Camera mounting bracket 4 Self-tapping screws 4 Hex-head screws 4 Large machine screws with flat and lock washers installed 4 Small machine screws Hex key Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S2-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common speaker replacement applications today, we've introduced a 5 1/4-inch component set, offering newer domestic trucks and cars the ability to upgrade their vehicle's sound quality. With its innovative technology, this component set offers a straightforward solution for achieving Alpine sound in many of today's vehicles. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone, delivering accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5 1/4" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 340 watts per pair / 170 watts each RMS Power Handling: 110 watts per pair / 55 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 3/4" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S50 package: S-S50 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws Warranty information Online product registration information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pairs Alpine S2-S50 - Next-Generation S-Series 5.25" Coaxial Speaker Set Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S50 5” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Polypropylene, Glass Fiber, and Mica Cone materials, the S2-S50 is designed for lightweight construction, high output, and low distortion, providing a clean and accurate audio experience. General Features: 5-1/4" 2-way Coaxial Car Speakers Peak Power Handling: 340 watts per pair / 170 watts each RMS Power Handling: 110 watts per pair / 55 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 3/4" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2" Cutout Dimensions: 4.5" Impedance: 4 ohms Frequency Response: 80 - 22000 Hz Sensitivity: 87 dB Authorized Internet Dealer MFR #: S2-S50 1-year Manufacturer's Warranty What's in the S2-S50 package: Alpine S2-S50 owner's manual Two 2-way speakers Two 12" Lengths of speaker wire Warranty information Online product registration information Important Notice Sheet Declaration of conformity Template and specs on the box Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine S2-A36F 4 Channel Amplifier, S2-S69 6X9" Coax Speakers, S2-S50 5.25" Coax Speakers and Absolute 8 Gauge Wiring Kit This bundle includes an Alpine S2-A32F 4-Channel V-Power Amplifier, an 8 Gauge Wiring Kit, a pair of Alpine S-Series S2-S69 6x9" Coaxial Speakers, and a pair of Alpine S2-S50 S-Series 5.25-inch Coaxial 2-Way Speakers. Alpine S2-A36F 600W Next Generation S-Series Hi-Res Class-D 4-Channel Car Amplifier General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Alpine S2-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each Power Handling: RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty Alpine S2-S50 - Next-Generation S-Series 5.25" Coaxial Speaker Set General Features: 5-1/4" 2-way Coaxial Car Speakers Peak Power Handling: 340 watts per pair / 170 watts each RMS Power Handling: 110 watts per pair / 55 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 3/4" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2" Cutout Dimensions: 4.5" Impedance: 4 ohms Frequency Response: 80 - 22000 Hz Sensitivity: 87 dB Authorized Internet Dealer MFR #: S2-S50 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.