Alpine (849)

Alpine S2-S68 6x8" or 5x7" 460W Peak (150W RMS) 6x8" S-Series 2-way 4-ohm Coaxial Car Speakers Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S68 6x8” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point.  General Features: 6" x 8" S Series 2-way Coaxial Car Speakers Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Hi-Res Audio certified Combined Polypropylene, Glass Fiber, and Mica cone material High-Amplitude Multi-Roll (HAMR) speaker surround 1" Cloth Dome tweeters 3.54" magnet and enhanced motor structure with 110% power handling Lightweight design with high output and low distortion Wide vehicle fitment range for easy installation Top-mount Depth: 2-3/8" Cutout Dimensions: 5 x 7-3/16  Impedance: 4 ohms Frequency Response: 75 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the Alpine S2-S68 Package: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S2-S68 owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S2-S65C 480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65C 6.5” Component Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of polyphylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 480 watts per set / 240 watts on each side RMS Power Handling: 160 watts per set / 80 watts on each side Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the SAlpine S2-S65C package: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-3/16" Screws Warranty information Alpine S2-S65C owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine AL16 AL-16 Alpine 16 PIN Radio Car Stereo Plug Harness Replacing an Aftermarket Radio harnessThe right harness for the right radio, Please be sure to review the application guide below for this harness as it will fit multiple radio models. This harness is a 16 pin model please be sure to review the image of the pin configuration and compare it to the plug socket on your radio to ensure it's a match.Fits: Suits most Alpine car audio units with with 16pin connector CDA-105Ri, CDA-7865R, CDA-7873R, CDA-7876RB, CDA-7893R, CDA-7894RB, CDA-9807, CDA-9811R, CDA-9812RB, CDA-9812RR, CDA-9813R, CDA-9815RB, CDA-9833R, CDA-9835R, CDA-9847R, CDA-9853R, CDA-9854R, CDA-9855R, CDA-9856R, CDA-9883R, CDA-9886R, CDA-9887R, CDE-101E, CDE-101R, CDE-7854R, CDE-7854RM, CDE-7855RB, CDE-7857RB, CDE-9841R, CDE-9843RM, CDE-9845RB, CDE-9846R, CDE-9846RM, CDE-9848RB, CDE-9850Ri, CDE-9864R, CDE-9872R, CDE-9873RB, CDE-9880R, CDE-9881RB, CDE-9882Ri, CDM-7892R, iDA-X100, iDA-X200, iDA-X300, iDA-X303, iDA-X305, TDA-7588RB and many others. If you are unsure or if you need help finding an item not listed feel free to send us your question.Plug & Play Installation General Features: Simply plug and play installation Clearly marked color-coded wires Ideal for any aftermarket radio 18 gauge high-quality wire Direct OEM fit connection 16 Pin harness Application Guide: Alpine CDA-105 Alpine CDA-105E Alpine CDA-105L Alpine CDA-117 Alpine CDA-117E Alpine CDA-7862 Alpine CDA-7863 Alpine CDA-7864 Alpine CDA-7873 Alpine CDA-7875 Alpine CDA-7876 Alpine CDA-7892 Alpine CDA-7893 Alpine CDA-7894 Alpine CDA-78965 Alpine CDA-7897 Alpine CDA-7965 Alpine CDA-7977 Alpine CDA-7995 Alpine CDA-7998 Alpine CDA-9813 Alpine CDA-9815 Alpine CDA-9833 Alpine CDA-9835 Alpine CDA-9847 Alpine CDA-9851 Alpine CDA-9853 Alpine CDA-9855 Alpine CDA-9856 Alpine CDA-9857 Alpine CDA--9870 Alpine CDA--9872 Alpine CDA--9873 Alpine CDA--9881 Alpine CDA-9883 Alpine CDA-9883E Alpine CDA-9884 Alpine CDA-9884E Alpine CDA-9884LI Alpine CDA-9885 Alpine CDA-9885L Alpine CDA-9886 Alpine CDA-9886M Alpine CDA-9887 Alpine CDE-102 Alpine CDE-102E Alpine CDE-102L Alpine CDE-103BT Alpine CDE-121 Alpine CDE-122 Alpine CDE-123 Alpine CDE-123E Alpine CDE-124SXM Alpine CDE-125BT Alpine CDE-125EBT Alpine CDE-126BT Alpine CDE-9841 Alpine CDE--9841 Alpine CDE-9842 Alpine CDE-9842E Alpine CDE-9843 Alpine CDE--9843 Alpine CDE-9845 Alpine CDE--9845 Alpine CDE-9852 Alpine CDE-9870 Alpine CDE-9870L Alpine CDE-9872 Alpine CDE-9872E Alpine CDE-9872L Alpine CDE-9873 Alpine CDE-9874 Alpine CDE-9874E Alpine CDE-9874L Alpine CDE-9881 Alpine CDE-9881L Alpine DVA-9860 Alpine DVA-9860E Alpine CDE-9846 Alpine iDA-X001 Alpine iDA-X100 Alpine iDA-X100M Alpine iDA-X200 Alpine iDA-X300 Alpine iDA-X303 Alpine iDA-X305 Alpine IVA-D300 Alpine IVA-D310 Alpine IVA-D901 Alpine VPA-B222 Alpine IVA-D100 ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine R2-S65 (R2S65) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil, which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and a reduced footprint, which contributes to more straightforward installation. General Features: 6.5" R-Series 2-way Coaxial Car Speakers carbon-fiber-reinforced polymer (CFRP) woofer Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.48" Cutout Dimensions: 5.31" Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the R2-S65 package: R2-S65 owner's manual Two 2-way Speakers Two multi-purpose adapter rings 2 Grilles 8 Speed clips Warranty information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SBV-10-WRA 10" Sub for 2007-2018 Jeep Wrangler with S-A60M Amp, Absolute KIT4 4 Gauge Amp Wiring kit Alpine designed their SBV-10-WRA sealed sub enclosure to fit under the passenger seat of 2007-17 Jeep Wrangler JK models (also fits the early 2018 JK body style), giving you the bass you need without taking up cargo space. Alpine loads the SBV-10-WRA with a rugged 10" subwoofer, which handles up to 350 watts RMS to deliver powerful bass. The sub's 2-ohm impedance ensures maximum output from your mono amplifier. Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU When you have a Wrangler, you don’t have extra space to spare. Alpine engineered the SBV-10-WRA to fit conveniently under the front passenger seat, making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. (NOTE: designed for fitment in Jeeps with the factory carpet. Fitment is not guaranteed with aftermarket or removed carpet) Enjoy impactful bass with your Wrangler’s top on or off. The SBV-10-WRA loads the lower frequency sound into the passenger’s footwell to deliver quality sound and maximized bass extension at all times, so your music continues even when the asphalt ends.General Features: 10" High-Performance Transducer Sealed Subwoofer Enclosure Power Handling: Peak: 1000W Total RMS: 300W Total Final Impedance: 2 ohms Preloaded with single 10" Series Subwoofers Sealed Enclosure with (finish type) Enclosure Dimensions: 16-1/4" L x 15-3/4" W x 8-3/8" H Subwoofer Features: Water Resistance: IP66 Rating Frequency Response: 35-200Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in terms of performance value. General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A60M owner's manual Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme Installing a car amplifier is already enough of a job without worrying about where to find the correct wire and installation accessories. What you might not know is that some companies are using gimmicks, and you could end up getting ripped off! Today, I recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would consist of. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable Three ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S2-W8D4 900W Max (300W RMS) 8" Type S Series Dual 4 Ohm Car Subwoofer ADD BASS TO PRACTICALLY ANY VEHICLE Don’t you think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under-seats, behind-rear bench seats in trucks, or even for some door applications. General Features: 8" 4 Ohm Type S Series Subwoofer Power Handling: Peak: 900 watts RMS: 300 watts Recommended Power Range: 150 - 300 Watts Kevlar Reinforced Pulp Cone HAMR Santoprene Rubber Surround Progressive Spider with Reinforced Layer Tinsel Leads Compound Radius Curve Extended Pole Geometry Perimeter Vented Frame with Airflow Management System 10 AWG Push Terminals 35mm Underhung Voice Coils Concealed Mount Gasket 34oz Ferrite Magnet Top-mount depth: 3-3/4" Cutout diameter: 6-7/8" Frequency Response: 34-200Hz Authorized Dealer 1-year Manufacturer's Warranty Priced Individually What's in the S2-W8D4 package: Two 8" Dual 4-ohm voice coil subwoofer Alpine S-W8D4 owner's manual 1 Rubber concealing ring Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information  Important Notice!  Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each Power Handling: RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty What is in the S-S69 package: S-S69 owner's manual Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-3/16" Screws Eight M4x60mm Machine screws  Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Split lock washers 8 Spacers Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SXE-6925S 2-way 6"x9" 280 Watts Coaxial Speakers & SXE-1705S 6.5" 2-way Component SpeakerAlpine SXE-6925S main feature is a Mylar-Titanium Balanced Dome Tweeter for a smooth vocal reproduction at a price not to be missed. The tweeters in this set sound fantastic. Alpine mids and highs have always been well-rounded and smooth sounding. This set of component speakers is no different.General Features: 6 x 9" Type-E Series Coaxial Car Speakers Power Handling: Peak: 280 watts per pair / 140 watts each RMS: 90 watts per pair / 45 watts each Long fiber natural pulp woofer Mylar dome tweeter Frequency Response: 40-20,000 Hz Mounting Depth: 68mm Sensitivity: 92dB Grilles included ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

2 Pair Alpine SXE-6925S 2-way 6"x9" 280 Watts Coaxial Speakers Alpine SXE-6926S main feature is a Mylar-Titanium Balanced Dome Tweeter for smooth vocal reproduction at a price not to be missed. The tweeters in this set sound fantastic. Alpine mids and highs have always been well-rounded and smooth-sounding. This set of component speakers is no different. General Features: 6 x 9" Type-E Series Coaxial Car Speakers Power Handling: Peak: 280 watts per pair / 140 watts each RMS: 90 watts per pair / 45 watts each Long fiber natural pulp woofer Mylar dome tweeter Frequency Response: 40-20,000 Hz Mounting Depth: 68mm Sensitivity: 92dB Grilles included What is in the SXE-6926S package: 6X9" Speakers (2) Mounting screws (4) Mounting screws (8) Speaker connection cables (2) SXE-6926S owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier A TOUGH MINI AMP THAT PACKS A PUNCH Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack will deliver powerful bass output for subwoofers in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice. HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to adapt to musical needs automatically Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-30MW box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet KTA-30MW owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier A TOUGH MINI AMP THAT PACKS A PUNCH Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice. HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Alpine KTA-30MW owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-A60M 500W V-Power Series Class D Monoblock Digital Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit Born Tough, Raised Strong Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing. General Features: V-Power Series Class D Monoblock Digital Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 Chan. 2 ohms: 500 watts x 1 Chan. Max power output: 500 watts x 1 Chan. Integrated wire and mounting screw terminals S.T.A.R. circuitry LED power (blue) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Optional Alpine RUX-KNOB.2 remote bass knob available Soft start turn-on 4 or 2 channel operation 4-channel speaker-level inputs Pre-amp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: 0.4V - 10V Non-fading pre-amp output Variable low-pass filter (50-400 Hz, 24 dB/octave) CEA-2006 compliant amplifier Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H Authorized Dealer 1-year Manufacturer's Warranty Absolute KIT-4 Complete 4 Gauge Amplifier Kit Product Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provides optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge)