Alpine (870)

Alpine SBV-10-WRA 10-Inch Subwoofer for 2007-2018 Jeep Wrangler with KTA-30MW Amplifier, Absolute KIT4 wire kit This bundle includes an Alpine 10" Loaded Weatherproof Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier, and an Absolute Kit 4 Wiring Kit.Alpine SBV-10-WRA Pre-Loaded 10-Inch Subwoofer for 2007-2018 Jeep Wrangler JKU10-inch subwoofer pre-loaded into a sealed, custom-fit enclosure. Designed to be pressure fit under the front passenger's seat rails, no mounting hardware is required. Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction. OEM-grade weather-resistant Molex 2-pin connector with pigtail wire harness. Frequency Response: 45-200Hz. When you have a Wrangler, you don't have extra space to spare. Alpine engineered the SBV-10-WRA to conveniently fit under the front passenger seat making efficient use of space. The SBV-10-WRA is a custom-shaped enclosure that fits snugly under the seat frame, so no mounting hardware is required. WEATHER RESISTANT - Driving with the top off is part of the fun of owning a Wrangler, but you sometimes get caught off-guard with the top down and inclement weather. The SBV-10-WRA is weather-resistant and rated IP66, so it's protected from total dust ingress and water from any direction. Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch input Absolute KIT-4 Complete 4 Gauge Amplifier Kit General Features: • Complete 4 Gauge Amplifier Kit• Designed specifically for car audio systems up to 1000 watts• Premium power and ground wire provide optimal power transfer• Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier• Terminals are gold-plated for excellent signal transfer• For use in any car, truck, RV, or boat• Authorized Internet Dealer• 1-year Manufacturer's warranty Package Includes: 1. 17 ft. of red 4 AWG high current power cable2. 3 ft. of black 4 AWG ground cable3. 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire4. 20 ft. of 12 AWG OFC Speaker cable5. 20 ft. of 16 AWG remote turn-on wire6. 6 ft. of split loom tubing7. 1 Gold plated 80 AMP AGU fuse8. 1 4 AWG gold ring terminal9. 1 4 AWG water-resistant inline fuse holder10. 2 Ring terminals11. 2 Spade terminals (4 gauge)12. 5 Spade terminals (14-16 gauge)13. 3 Self-tapping screws14. 1 Rubber grommet15. 20 Black cable ties16. 2 Butt connectors (18-22 gauge)17. 1 Butt connector (4 gauge)

Alpine Bundle 1-Pair SXE-6926s 6x9" Coax, 1-Pair SXE-1751s 6.5" Component, BBX-F1200 280W 4-Ch Amp, and Wiring Alpine Bundle 1-Pair SXE-6926s 6x9" Coax, 1-Pair SXE-1751s 6.5" Component, BBX-F1200 280W 4-Ch Amp and Wiring Alpine SXE-6926S 2-way 6"x9" 280 Watts Coaxial SpeakersGeneral Features: 6 x 9" Type-E Series Coaxial Car Speakers Power Handling: Peak: 280 watts per pair / 140 watts each RMS: 90 watts per pair / 45 watts each Long fiber natural pulp woofer Mylar dome tweeter Frequency Response: 40-20,000 Hz Mounting Depth: 68mm Sensitivity: 92dB Grilles included What is in the SXE-6926S package: 6X9" Speakers (2) Mounting screws (4) Mounting screws (8) Speaker connection cables (2) SXE-6926S owner's manual Alpine SXE-1751S 6 1/2" 2-Way Component SpeakerGeneral Features: RMS Power: 45 Watts Peak Power: 280 Watts Nominal Impedance: 4 Ohms Frequency Response: 60Hz-20kHz Ferrite Woofer Neodym Tweeter Kapton Voice Coil Alpine BBX-F1200 - 4-Channel Amplifier General Features: Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Total Max Power: 600W Per Channel into 4ohms (1%THD+N): 4 x 50W Per Channel into 2ohms (1%THD+N): 4 x 70W Bridged into 4ohms (1%THD+N): 2 x 130W Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Footprint: 330 mm x 52 mm x 240 mm Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-T600 Amplifier and SWT-12S4 12" Bass Tube and American Terminal AKIT4 4 Gauge Amplifier Kit This bundle includes an Alpine BBX-T600 Amplifier, an Alpine SWT-12S4 12" Bass Tube, & American Terminal AKIT4 4 Gauge Amplifier Kit Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2-Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp delivers high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance with Bass EQ allows you to maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protection (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just the thing for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included American Terminal AKIT4 4-Gauge Amplifier Wiring Kit General Features: Complete 4-Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable Three ft. of black 4 AWG ground cable 15 ft. of RCA triple-shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80-AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine Bundle 1-Pair SXE-1751s 6.5" Component, 1-Pair SXE-1726s 6.5" Coax, BBX-F1200 280W 4-Ch Amp, and Absolute KIT4 4 Gauge Wiring Amp Kit Alpine Bundle 1-Pair SXE-1751s 6.5" Component, 1-Pair SXE-1726s 6.5" Coax, BBX-F1200 280W 4-Ch Amp and Wiring - This bundle includes a pair of Alpine SXE-1751S 6 1/2" 2-Way Component Speaker, Alpine SXE-1726S 6 1/2" 2-way Coaxial Speaker, an Alpine BBX-F1200 280 Watt 4-Channel Amplifier, a wiring kit, a pry kit, and an Alpine cozy. Alpine BBX-F1200 280 Watt 4-Channel Amplifier General Features:  4 Channel Amplifier Amplifier Type: Class-A/B Channel Design: 4/3/2 Channel Total Max Power: 600W Per Channel into 4ohms (1%THD+N): 4 x 50W Per Channel into 2ohms (1%THD+N): 4 x 70W Bridged into 4ohms (1%THD+N): 2 x 130W Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB) Footprint: 330 mm x 52 mm x 240 mm Alpine SXE-1751S 6 1/2" 2-Way Component Speaker General Features: RMS Power: 45 Watts Peak Power: 280 Watts Nominal Impedance: 4 Ohms Frequency Response: 60Hz-20kHz Ferrite Woofer Neodym Tweeter Kapton Voice Coil Alpine SXE-1726S 6 1/2" 2-way Coaxial Speaker General Features: RMS Power: 40 Watts Peak Power: 220 Watts Nominal Impedance: 4 Ohms Frequency Response 60Hz-20kHzVoice Coil: Kapton Woofer Magnet: Ferrite Tweeter Magnet: Neodym Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a new 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6" x 9" Type S Series 2-Way Coaxial Car Speakers Power Handling: Peak: 520 watts per pair / 260 watts each RMS: 170 watts per pair / 85 watts each Recommended Power Range: 10 - 85 watts RMS per channel Carbon Fiber Reinforced Plastic (CFRP) Cone High Amplitude Multi-Roll (HAMR) Surround 1" Silk Dome Tweeter Rubber magnet boot cover CEA-2031 compliant speakers 35mm Voice Coil Top-mount Depth: 2-15/16" Cutout Dimensions: 5-29/32" x 8-3/4" 4 ohms Impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB Compatible with the Alpine KTE-S69G Grille Authorized Dealer 1-year Manufacturer's Warranty What is in the S-S69 package: Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire Eight 1-3/16" Screws Eight M4x60mm Machine screws Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Split lock washers Warranty information Online product registration information Template and specs on the box S-S69 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine Type-X Bundle 1-Pair X-S69C 6x9" Component with 1-Pair X-S65C 6.5" Component and X-A70F 700W 4-Ch Amp Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a compact design. Available in mono, four-channel, and five-channel configurations, these amps perfectly match the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty 2 Alpine X-S69C 6" x 9" Component System 720W Max, 240W RMS 6" x 9" X-Type 2-Way Component Car Speakers EXPERIENCE DETAIL YOU’VE NEVER HEARD BEFORE The new X-Series speakers combine proven technologies, superior materials, and innovative design to reproduce sound so accurately that you’ll feel right in front of the performance.HI-RESOLUTION AUDIO Hi-Res Audio is the next level of digital audio for music fans alike and requires an extensive dynamic range to reproduce music with fantastic realism and depth. The X-Series speakers are compatible and, when paired with other X-Series components, provide an incredible Hi-Rez Audio experience. CARBON GRAPHITE TWEETER The tweeter’s diaphragm is built from a sheet of carbon graphite. This enables it to reproduce frequency ranges in the upper 55kHz range, usually achieved using a harsher, hard dome tweeter like Aluminum or Titanium. Carbon graphite allows us to hit those High-rez audio-compatible frequencies while maintaining a smooth dome's softer, more damped sound qualities. NEW CONE MATERIAL The X-Series speaker cone is made from a tightly interwoven Nano-fiber material. The tiny diameter fibers create a damped, rigid cone structure while staying lightweight. Because of this light rigidity, the X-Series speaker is capable of highly accurate sound reproduction while maintaining a soft tonality. The cone’s resistance to flexing ensures very little to no discoloration of sound and phase shifts. The result is a highly accurate speaker that is well-staged in front of you. General Features: 6" x 9" X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Tweeters swivel within flush mounts Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 3-1/16" Cutout Dimensions: 5-7/8" x 8-7/8" 4 ohms impedance Frequency Response: 45 - 50,000 Hz Sensitivity: 89 dB Authorized Dealer 1-year Manufacturer's Warranty Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to leap at the premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the best in your audio system. An all-new magnet design in a cast aluminum frame allows these speakers to have a low profile so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to strengthen the 6-1/2" woofer in lower frequencies. The woofer cone uses a specialized fiber for extreme rigidity, while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll have a soaring system, thanks to power handling up to 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S2-S68 6x8" 5x7" Rear & Front Factory Speaker Replacement  Alpine S2-S68 6x8" or 5x7" 460W Peak (150W RMS) 6x8" S-Series 2-way 4-ohm Coaxial Car Speakers Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S68 6x8” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point.  General Features: 6" x 8" S Series 2-way Coaxial Car Speakers Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Hi-Res Audio certified Combined Polypropylene, Glass Fiber, and Mica cone material High-Amplitude Multi-Roll (HAMR) speaker surround 1" Cloth Dome tweeters 3.54" magnet and enhanced motor structure with 110% power handling Lightweight design with high output and low distortion Wide vehicle fitment range for easy installation Top-mount Depth: 2-3/8" Cutout Dimensions: 5 x 7-3/16  Impedance: 4 ohms Frequency Response: 75 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the Alpine S2-S68 Package: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other) Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box Alpine S2-S68 owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp and Wiring - This bundle includes a pair of Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers, a pair of Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way Speakers, an Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine X-S65C X-Series 6.5 Inch Component 2-Way SpeakersCTA-2031 Specifications: 120W RMS, 360W Peak, 4 Ohm General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way SpeakersSPECIFICATIONSWoofer: 6-1/2" coneTweeter: 1" Carbon GraphiteMaximum Peak Power: 330 WattsMaximum RMS Power: 110 Wattsimpedance: 4 ohmsSensitivity: 89 dB SPL (1W @ 1m)Frequency Response: 55 Hz to 50 kHzMounting Depth/Drop-in Mounting: 2-5/16- (5.9cm)Cutout Diameter: 5-13/32- (13.7cm) circleRecommended Amplification: up to 110 watts RMS per channelWarning: Both products contain a high-performance tweeter. If there is a tweeter already installed in your car, then you must disconnect its terminals. If you leave the original tweeter connected and connect this product in parallel, then a fault may develop in this product, so you are strongly recommended not to do so. Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the X-A70M package: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet X-A70M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine Type-R Bundle 1-Pair R2-S65C 6.5" Component, 1-Pair R2-S65 6.5" Coax speakers, R2-A60F 600W 4-Ch Amp, and Absolute KIT4 Amp Wiring Kit Alpine Type-R Bundle 1-Pair R2-S65C 6.5" Component, 1-Pair R2-S65 6.5" Coax speakers, R2-A60F 600W 4-Ch Amp, and Wiring - This bundle includes a pair of Alpine R2-S65C 6.5 Inch Component 2-Way Speakers, a pair of Alpine R2-S65 R-Series 6 1/2-inch Coaxial 2-Way Speakers, Alpine R2-A60F R-Series Four-Channel Amplifier, and Absolute KIT4 Amp Wiring Kit Alpine R2-S65C 100W RMS 6.5" R-Series Component 2-Way Speakers If you play your music loud and want others to know, the R-Series speakers match you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, delivering power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. General Features: 6.5" R-Series 2-way Component Car Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure  Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine R2-S65 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and a reduced footprint, which contributes to more straightforward installation. General Features: 6.5" R-Series 2-way Coaxial Car Speakers carbon-fiber-reinforced polymer (CFRP) woofer Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 200 watts per pair / 100 watts each Glass Fiber cone material Rubber HAMR Surround Composite Basket Hi-Res Audio Certified 1" Magnesium Hard Dome Tweeters CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.48" Cutout Dimensions: 5.31" Impedance: 4 ohms Frequency Response: 65 - 40,000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine R2-A60F R-Series 4-Channel Power Density Amplifier 600 Watts RMS Experience the impressive power and exceptional performance of the Next-Gen R-Series R2-A60F 4-Channel Amplifier, now certified for Hi-Res Audio Playback. The R2-A60F features a reduced footprint that’s 15% smaller than the previous model (R-A60F), making it easier than ever to install in most vehicle applications while still getting the same powerhouse performance. General Features: R-Series Class D 2 ohms Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 100 watts x 4 channel RMS Power Rating: 2 ohms: 150 watts x 4 channel RMS Power Rating: Bridged: 300 watts x 2 channel @ 4 ohms Total power output: 600 watts LED Power/Protect Light Signal sensing remote turn-on Hi-Res Certified CTA-2006 compliant Low level: 0.2 - 4 volts, Input sensitivity High level: .5 - 10 volts Input sensitivity Frequency Response: 10 - 45000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 80 dB Variable high-pass filter: 50 - 6,000 Hz Variable low-pass filter: 50 - 400 Hz Fuse Rating: 60A 4 AWG gauge amplifier wiring kit is recommended for installation Dimensions: 11.12" L x 6.92" W x 2.14" H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine X-S69C 6" x 9" Component System 720W Max, 240W RMS 6" x 9" X-Type 2-Way Component Car Speakers EXPERIENCE DETAIL YOU’VE NEVER HEARD BEFORE The new X-Series speakers combine proven technologies, superior materials, and innovative design to reproduce sound so accurately, you’ll feel like you’re right in front of the performance. HI-RESOLUTION AUDIO Hi-Res Audio is the next level of digital audio for music fans alike and requires an incredibly wide dynamic range to reproduce music with amazing realism and depth. The X-Series speakers are Hi-Rez compatible and when paired with other X-Series components, provide an incredible Hi-Rez Audio experience. CARBON GRAPHITE TWEETER The tweeter’s diaphragm is built from a sheet of carbon graphite which enables it to reproduce frequency ranges in the upper 55kHz range, usually achieved using a harsher, hard dome tweeter like Aluminum or Titanium. Carbon graphite allows us to hit those High-rez audio-compatible frequencies while maintaining the softer, more damped sound qualities of a soft dome. NEW CONE MATERIAL The X-Series’ speaker cone is made from a tightly interwoven Nano-fiber material. The extremely small diameter fibers create a damped, rigid cone structure while staying lightweight. Because of this light rigidity, the X-Series speaker is capable of highly accurate sound reproduction while maintaining a soft tonality. The cone’s resistance to flex ensures it is very little to no discoloration of sound and phase shifts. The result is a highly accurate speaker that is well-staged in front of you. General Features: 6" x 9" X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Tweeters swivel within flush mounts Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount Depth: 3-1/16" Cutout Dimensions: 5-7/8" x 8-7/8" 4 ohms impedance Frequency Response: 45 - 50,000 Hz Sensitivity: 89 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the X-S69C package 2 Woofers 2 Woofer grilles+ 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) 2 Bottom mount brackets Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesives backed pads (crossover) 2 Circular adhesives backed discs (tweeter) Eight M4x60mm Machine screws (with washers attached) 8 Flat washers & 8 Split lock washers Eight 1-1/8" Screws & Eight 5/8" Screws 8 Speed-clips & 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S69C owner’s Manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Alpine S2-S65C 480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65C 6.5” Component Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of polyphylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 480 watts per set / 240 watts on each side RMS Power Handling: 160 watts per set / 80 watts on each side Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the SAlpine S2-S65C package: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-3/16" Screws Warranty information Alpine S2-S65C owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine BBX-T600 Amplifier and SWT-12S4 12" Bass Tube and Absolute KIT4 4 Gauge Amplifier Kit This bundle includes an Alpine BBX-T600 Amplifier, an Alpine SWT-12S4 12" Bass Tube, & Absolute KIT4 4 Gauge Amplifier Kit Alpine BBX-T600 600W Max BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. It is designed to fit easily in virtually any system. This amp delivers high-output power and exceptional performance for its class. It is a great way to expand your sound system on a limited budget. These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance with Bass EQ allows you to maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-T600 Class-A/B 2-ohm Stable 2-Channel Amplifier 50 Watts @ 4 Ohm x 2 Channel 70 Watts @ 2 Ohm x 2 Channel 130 Watts @ 4 Ohm x 1 Channel Bridged Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on Two or Mono channel operation One pair of preamp outputs to connect multiple amplifiers 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 80 - 1200 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 20A x 1 Dimensions: 9.84"W x 9.44"L x 2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Absolute KIT4 4 Gauge Amplifier Wiring Kit General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable Three ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.