Car Amplifier Wiring Amp Kit
CAR AMPLIFIERS
CAR AMPLIFIERS ACCESSORIES
CAR AMPLIFIERS BUNDLES
Car Audio & Video
Car Component Speaker
Car Speaker
Car Speaker Bundle
Car Stereo
Car Stereo Bundle
Car Subwoofer
Car Subwoofers with Amplifier and Box Packages
Loaded Car Subwoofer Enclosure
LOADED ENCLOSURES BOX
Remote Bass Knob
Speaker Grill Mesh Cover
Subwoofer Level Controller
temporary import
Under Car Seat Powered Subwoofers


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R-A75M Monoblock Subwoofer Amplifier 750 Watts RMS + 0G Amp Kit
$549.99
$799.99
Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier 750 Watts RMS with Absolute Complete 4000W 0 gauge car amplifier installation wiring kit amp pk1 0 ga
Alpine R-A75M R-Series Mono Digital Amplifier - 750 Watts x 1 at 2-Ohms
HI-RESOLUTION AUDIO COMPLIANT
The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., Originally launched in the premium X-Series amplifiers, the R-Series amplifiers produce efficient power with enhanced dynamic range, qualifying them to be Hi-Resolution Audio compliant.
THE LOUDEST FAMILY ON THE BLOCK
The “R” line of speakers and subwoofers has a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.
General Features:
R-Series Class D Monoblock Subwoofer Amplifier
Power Output:
500 watts RMS x 1 @ 4 ohms
750 watts RMS x 1 @ 2 ohms
CTA-2006 compliant
Variable low-pass filter (50-400 Hz, 24 dB/octave)
Variable bass boost (0-12 dB at 50 Hz)
Variable subsonic filter (min-40 Hz, 24 dB/octave)
We recommend the Alpine RUX-KNOB.2 if you are looking for a remote bass knob for Alpine Amplifiers
Preamp and speaker-level inputs
Speaker wire to RCA adapter required for speaker-level input - we recommend the Rockford Fosgate RFI2SW
preamp outputs
wiring and hardware not included with amplifier
4-gauge power and ground leads recommended - get the NVX XAPK4 for this
Fuse rating: 40A x 2
Dimensions: 9" W x 2-1/16" H x 7-1/8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
Mono subwoofer amplifier
Two 40-amp ATO fuses (installed)
4 Mounting feet
Four 3/4" Screws
Eight M2.5x5.5mm Machine screws
2mm Allen wrench
3mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine R-A75M owner's manual
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-SB10V 10" 600w S-S10D4 Subwoofer Ported Sub Enclosure Box Alpine Amp S-A60M & 4 Gauge KIT4 Amp Kit
$779.90
$999.99
Alpine S-SB10V 10" 600w S-S10D4 Subwoofer Ported Sub Enclosure Box Alpine Amp S-A60M & 4 Gauge KIT4 Amp Kit
Package Includes:
(1) Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box
(1) Alpine S-A60M 600-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D
(1) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box
Alpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.
This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.
Enclosure Stacking Features
Unique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.
Optimized Performance
The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.
Features:
S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure
Includes S-W10D4 wired in parallel
600W RMS power handling
2Ω Impedance Ported enclosure design
Frequency response: 28-200 Hz
Vented enclosure tuning frequency: 36 Hz
Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D
Alpine S-A60M 600-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D
S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
THE BETTER CHOICE IN PERFORMANCE VALUE Perfect for beginners and enthusiasts alike, the S-Series amplifiers have the technology to improve your music experience yet are still friendly on your wallet. Used in conjunction with our advanced S-Series speakers and subwoofers, they create a complete sound system that takes your in-vehicle music experience to the next level.
SMALL BUT MIGHTY The S-Series amplifiers are designed to fit anywhere. Measuring at 8”, these amplifiers can be mounted under seats or behind panels. Though they sport a compact footprint on the outside, they produce impressive power on the inside. At 600 watts RMS, the S-A60M is a powerful partner to drive the versatile S-Series subwoofers.
RELIABLE PERFORMANCE The S-Series amplifiers contain technology that was previously only available in our premium lineup of amplifiers, the R- and X-Series models. The S-Series models are based on Alpine’s intelligent amplifier platform that ensures superior sound reproduction and precision imaging. With an improved heat sink, and protection circuit design that eliminates thermal shut-down, your music will keep playing no matter where your drive takes you.
General Features:
Alpine’s Class D Amplifier Circuit
CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V ≤ 1% THD+N); 600W RMS x 1 (2ohm, 14.4V ≤ 1% THD+N)
S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm)
THD+N ≤ 0.03% (ref 1W info 4 ohm)
Frequency Response: 10Hz-400Hz (+/-3 dB)
Damping Factor: > 1000
Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
General Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provides optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Authorized Internet Dealer
1-year Manufacturer's warranty
Package Includes:
17 ft. of red 4 AWG high current power cable
3 ft. of black 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)
⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
PXE-0850 X 8-channel car amplifier with digital signal processing 25 watts RMS x 8
$899.95
$1,099.99
Alpine PXE-0850X 8-channel car amplifier with digital signal processing 25 watts RMS x 8
As newer and newer vehicles are equipped with highly integrated displays and complex sound systems, the stand-alone DSP, Digital Signal Processor, is becoming crucial for building the next-level Alpine sound system. How do you upgrade your sound without changing your head unit? It may be more complex than adding amplifiers anymore. Modern factory systems generally have speakers playing a specific range of frequencies, making it difficult to improve sound and add aftermarket amplifiers. The Alpine PXE-0850S allows you to take up to 6 independent signals (3 per side, for example) and combine them to create a full range signal. Once you have that full-range signal, you can send them to up to 12 independent channels allowing for extreme versatility in system building.
The PXE-0850S has an LCD remote controller that can be flush-mounted on the dash. Use the rotary knob to quickly control volume, preset storage and recall, and source selection. You can also view the results on the remote controller’s LED screen. The controller adds quick adjustability to your system if needed or it can be left out altogether if smartphone control is enough.
General Features:
Music & navigation sound mixing
Can arbitrarily adjust the volume ratio of main/sub audio source
Full-frequency mode is added, and each channel can be set to full-frequency mode, which solves the problem that channels cannot be distributed in projects such as audition rooms and RVs to reduce the setting time.
Split-screen display, adding delay group, more convenient operation!
Total volume adjustment
Bass volume adjustment
Sound source switching
Auxiliary sound source switching
EQ preset switching
Frequency response: 20Hz - 20KHz
Inputs: 6 high-level signal inputs, 6-channel RCA signal, Bluetooth signal input
Outputs: 8 x 25W (Rated power), 12-channel RCA output
2.0 multichannel surround
31 Bands parametric EQ
Hi-pass / Low-pass / Bandpass Crossover
Time delays of up to 20 MS per channel
Input/output frequency summing
Music & navigation sound mixing
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine iLX-W670 7" Receiver Bluetooth with Carplay Android For 2008-2010 Chrysler 300/300C
$449.85
$499.85
Alpine iLX-W670 7" Receiver Bluetooth w/Carplay/Android For 2008-2010 Chrysler 300/300CPackage Includes:
(1) ALPINE iLX-W670 7" In-Dash Car Digital Media Receiver w/ Apple CarPlay/XM Ready
(1) Metra 95-6511 Chrysler/Jeep/Dodge In-Dash Radio Double DIN Kit
(1) Axxess XSVI-6522NAV 2007-2016 Chrysler Wire Harness Interface W/ Nav Outputs
(1) Metra 40-EU10 2002-08 VW/BMW/European Aftermarket to Car Antenna Adaptor
This Package Fits The Following Vehicles:
CHRYSLER
200: 2011-2014
300/300C: 2008-2010
ASPEN 2008-2009
SEBRING 2007-2010
TOWN & COUNTRY 2008-UP
DODGE
AVENGER 2007-2014
CALIBER 2009-2012
CHALLENGER 2008-2014
CHARGER 2008-2010
DAKOTA 2008-2011
DURANGO 2008-2009
GRAND CARAVAN 2008-up
JOURNEY 2009-2010*
MAGNUM 2008-2009
NITRO 2007-2011
RAM 1500: 2009-2011
RAM 2500/3500: 2010-2011
RAM CHASSIS CAB 2011
JEEP
COMPASS 2009-UP
COMMANDER 2008-2010
GRAND CHEROKEE 2008-2010
PATRIOT 2009-UP
LIBERTY 2008-UP
WRANGLER 2007-UP*
WRANGLER UNLIMITED 2007-UP*
VW
Routan 2009-2013
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S-W10D4 S-Series 10" Dual 4-Ohm Subwoofers Bundle
$479.90
$639.99
2 Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer with Absolute TW500 Tweeter & BT1700 Electrical Tape & Mobile Holder
VERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications.
General Features:
10" 4 ohm S-Series (Type-S) Subwoofer
Power Handling:
Peak: 1800 watts
RMS: 600 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-W10D4 package:
One 10" Dual 4-ohm voice coil subwoofer
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide
Online product registration information
Warranty information
S-W10D4 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Pairs Alpine S2-S68 5x7 (6x8) Speaker 2-Way Coaxial Speakers Bundle
$299.90
$399.95
2 Pair Alpine S2-S68 6x8" 5x7" Rear & Front Factory Speaker Replacement & Absolute BT1700 Electrical Tape & Absolute TW500 Tweeter & Swivel Mobile Bracket Holder Bundle
Alpine S2-S68 6x8" or 5x7" 460W Peak (150W RMS) 6x8" S-Series 2-way 4-ohm Coaxial Car Speakers
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S68 6x8” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point.
General Features:
6" x 8" S Series 2-way Coaxial Car Speakers
Peak Power Handling: 460 watts per pair / 230 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Hi-Res Audio certified
Combined Polypropylene, Glass Fiber, and Mica cone material
High-Amplitude Multi-Roll (HAMR) speaker surround
1" Cloth Dome tweeters
3.54" magnet and enhanced motor structure with 110% power handling
Lightweight design with high output and low distortion
Wide vehicle fitment range for easy installation
Top-mount Depth: 2-3/8"
Cutout Dimensions: 5 x 7-3/16
Impedance: 4 ohms
Frequency Response: 75 - 40,000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the Alpine S2-S68 Package:
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other)
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
Alpine S2-S68 owner's manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 ALPINE S2-W10D2 10" 1800 Watt Car Audio Subwoofers DVC Dual 2-Ohm Subs
$479.90
$499.99
2 Alpine S2-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer
Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch models. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
10" 2 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S2-W10D2 package?
S2-W10D2 owner's manual
One 10" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide
Online product registration information
Warranty Information
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine W10S4 Car Audio Bassline Single 4 Ohm 500 Watt 10" Subwoofers with Sub Install Kit Package
$219.90
$250.00
2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
10" Single 4-ohm BassLine (Bass) Series Subwoofer
Power Handling:
Peak: 750 watts
RMS: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelet Ribs (P.W.R.) cone design
An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Top-mount depth: 5-1/16"
Cutout diameter: 9"
Frequency Response: 24 - 200Hz
Sensitivity: 86.6dB
Resonance Frequency (Fs): 32
Authorized Dealer
1-year Manufacturer's Warranty
What's in the W10S4 package:
W10S4 owner's manual
One 10" Subwoofer per box
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty Information
Important Notice!
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
4 Alpine R2-S69 300W 6x9" 2-Way Speakers + R2-A60F 4-Channel Amplifier + Amp Kit
$1,339.85
$1,800.00
2 Pair Alpine R2-S69 300W 6x9" Car Audio 2-Way Speakers + Alpine R2-A60F 4-Channel Amplifier + Absolute KIT4B 4 Gauge Amp Kit
Alpine R2-A60F R-Series 4-Channel Power Density Amplifier 600 Watts RMSHI-RESOLUTION AUDIO COMPLIANT
The R-Series amplifiers utilize Alpine’s advanced amplifier platform. This platform takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control technology. Initially launched in the premium X-Series amplifiers, it produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers as high-resolution Audio compliant.
THE LOUDEST FAMILY ON THE BLOCK
The “R” line of speakers and subwoofers has a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. In addition to their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.General Features:
Alpine R2-A60F
Alpine R-Series 4-Channel Power Density Amplifier
RMS Power Output:
100 Watts x 4 @ 4 Ohm
150 Watts x 4 @ 2 Ohm
300 Watts x 2 @ 4 Ohms Bridged
Class-D Amplifier
Frequency Response: 15 Hz - 45 kHz
S/N ratio: 87dB (ref: 1W into 4 ohms), >106dB (ref: rated power into 4 ohms)
Only 46 degrees of phase shift
Hi-Resolution Audio Compliant
Designed to match perfectly with the R-Series subwoofers (12, 10, and 8-inch sizes available) and the new R-Series speakers.
Fuse Rating: 30A x 2
Approximate Weight: 11 lbs
Dimensions: 10-3/4" W x 2-1/16" H x 10" D
Authorized Dealer
1-year Manufacturer's Warranty
Alpine R2-S69 6x9 R-Series High-Resolution Coaxial Speakers, Pair
Engineered to deliver crisp highs, rich mids, and deep lows, the Next-Gen R-Series R2-S69 Speakers will elevate your music for a deafening and fun sound experience.
General Features:
6" x 9" 2-way Coaxial Car Speakers
Peak Power Handling: 600 watts per set / 300 watts on each side
RMS Power Handling: 200 watts per set / 100 watts on each side
Glass Fiber cone material
High-Amplitude Multi-Roll (HAMR) speaker surround
1" Magnesium Hard Dome tweeters
Ferrite magnet motor structure
Two premium-grade crossover networks
Top-mount Depth: 2.99"
Cutout Dimensions: 5.86 x 8.66
Impedance: 4 ohms
Frequency Response: 60 - 40000 Hz
Sensitivity: 88 dB
Protective open mesh grille pair included
Hi-Res Audio certified
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the R2-S69 Package:
R2-S69 owner's manual
Two 2-way Speakers
2 Bottom mount brackets
2 Grilles
Eight 1-1/8" Screws
Eight M4x60mm Machine screws (with split lock washers attached)
Online product registration information
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
(4) ALPINE R-S69.2 300 Watt 6x9" Car Audio Coaxial 2-Way Speakers
$799.90
$800.00
2 Alpine R-S69.2 600W Peak, 200W RMS R-Series 6x9 Inch Coaxial 2-Way Speakers
R-Series speakers give you power and control. With an innovative material that delivers more output, the speakers produce a dependable performance for a loud and fun experience. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output.
General Features:
Alpine R-S69.2
R-Series 6x9 Inch Coaxial 2-Way Speakers
Power Handling:
RMS: 100 Watts
Peak: 300 Watts
Impedance: 4 Ohm
Carbon-fiber reinforced polymer (CFRP) woofer
Carbon-fiber reinforced polymer dome tweeter
Frequency response: 60 Hz - 40 kHz
Sensitivity: 90 dB
Top-mount depth: 2-7/8"
Grilles included
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
Two 2-way Speakers
2 Bottom mount brackets
2 Grilles
2 Grille badges
Eight 1-1/8" Screws
Eight M4x60mm Machine screws (with split lock washers attached)
8 Split lock washers
8 Flat washers
Eight M4 Hex nuts
8 Speed clips
Warranty information
Important Notice
Online product registration information
Template and specs on the box
Alpine R-S69.2 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Pair Alpine R2-S65 6 1/2" 200 Watt Speakers with 20' Speaker Wire
$659.90
$650.00
2 Alpine R2-S65 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers with Absolute 20' Speaker Wire Package
TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY
If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
General Features:
6.5" R-Series 2-way Coaxial Car Speakers
carbon-fiber-reinforced polymer (CFRP) woofer
Peak Power Handling: 600 watts per pair / 300 watts each
RMS Power Handling: 200 watts per pair / 100 watts each
Glass Fiber cone material
Rubber HAMR Surround
Composite Basket
Hi-Res Audio Certified
1" Magnesium Hard Dome Tweeters
CEA-2031 compliant: Yes
Ferrite magnet motor structure
Top-mount Depth: 2.48"
Cutout Dimensions: 5.31"
Impedance: 4 ohms
Frequency Response: 65 - 40,000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-S65 package:
R2-S65 owner's manual
Two 2-way Speakers
Two 6-1/2" Adapter rings
2 Grilles
2 Grille badges
Eight 1-1/8" Screws
Eight M4x12mm Machine screws
8 Speed clips
Warranty information
Important Notice
Online product registration information
Template and specs on the box
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-S57 5x7" Car Speakers+ S-S69 6x9" Speakers
$319.90
$349.99
Alpine S-S57 230 Watt 5x7" Car Speakers+S-S69 6x9" 260w Speakers
Package Includes (1) Pair Alpine S-S57 230 Watt 5x7" or 6x8" Coaxial 2-Way Car Audio Speakers. (1) Pair Alpine S-S69 260 Watt 6x9" Coaxial 2-Way Car Audio Speakers.
Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers
IT FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
6" x 9" Type S Series 2-Way Coaxial Car Speakers
Power Handling:
Peak: 520 watts per pair / 260 watts each
RMS: 170 watts per pair / 85 watts each
Recommended Power Range: 10 - 85 watts RMS per channel
Carbon Fiber Reinforced Plastic (CFRP) Cone
High Amplitude Multi-Roll (HAMR) Surround
1" Silk Dome Tweeter
Rubber magnet boot cover
CEA-2031 compliant speakers
35mm Voice Coil
Top-mount Depth: 2-15/16"
Cutout Dimensions: 5-29/32" x 8-3/4"
4 ohms Impedance
Frequency Response: 65 - 22000 Hz
Sensitivity: 90dB
Compatible with the Alpine KTE-S69G Grille
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-S69 package:
S-S69 owner's manual
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire
Eight 1-3/16" Screws
Eight M4x60mm Machine screws
8 Speed clips
16 Flat washers
8 Split lock washers
8 Spacers
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
Alpine S-S57 5x7" Car Audio Coaxial 2-Way Speakers
IT FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5"x7" S-Type Series TYPE Car Speakers/Component System
Power Handling:
Peak: 460 watts per pair / 230 watts each
RMS: 150 watts per pair / 75 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
1.1" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2-11/32"
Cutout Dimensions: 4-15/16" x 7-3/16"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-S57 package:
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
S-S57 owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.