Alpine Packages & Bundles (506)

Alpine S-S57 5x7" Rear Factory Speaker Replacement Kit for 2004 Ford F-150 Heritage + Metra 72-5600 Speaker Harness  Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box S-S57 owner's manual Metra 72-5600 Speaker Adapter Compatible WithFord Crown Victoria 1998-2011 Edge 2007-2010 Escape 2008-2012 Escape (w/ out sub) 2004-2007 Escape (seven-speaker system w sub) 2004-2007 Escape Hybrid 2004-2007 Escape 2001-2003 Excursion 2000-2005 Expedition 2007-2014 Expedition Non NAV 2004-2006 Expedition with factory NAV 2004-2006 Expedition (late production) with factory NAV 2003 Expedition (late production) 2003 Expedition (early production) 2003 Expedition 1999-2002 Expedition (fleet) 2015 Expedition (SSV) 2015 Explorer 2005-2010 Explorer (Audiophile system w sub) 2004-2005 Explorer 2002-2003 Explorer Sport Trac 2001-2010 F-150 2004-2008 F-250/350/450/550 2017 F-250/350/450/550 (with 8.4-inch screen) 2013-2016 F-250/350/450/550 (without 8.4-inch screen) (with CD) 2013-2016 F-250/350/450/550 XL (without CD) 2013-2016 F-250/350/450/550 1999-2012 F-250 1998 F-650/750 (AM/FM/CD) 2016-2017 F-650/750 (AM/FM) 2016-2017 F-650/750 2000-2015 Focus (without MyFordTouch) 2012-2014 Focus 2000-2007 Focus (with Blaupunkt radio) 2003-2004 Freestar 2004-2007 Fusion 2006-2009 Mustang 2010-2014 Mustang (late 2008 build date) 2008-2009 Mustang (early 2008 build date) 2008 Mustang 2005-2007 Ranger 1998-2011 Taurus (without electronic controls) 2000-2007 Taurus (with electronic controls) 2000-2007 Thunderbird 2002-2005 Transit Connect 2010-2011 Lincoln Aviator (with NAV) 2003-2005 Aviator (without NAV) 2003-2005 Mark LT 2005-2008 MKX (with NAV) 2007-2010 MKX (without NAV) 2007-2010 MKZ (with NAV) 2007-2009 MKZ (without NAV) 2007-2009 Navigator (with NAV) 2007-2014 Navigator (without NAV) 2003-2014 Navigator (with NAV) (w/ THX audio) 2003-2006 Navigator (with NAV) (w/o THX audio) 2003-2006 Navigator (early production) 2003 Navigator 1999-2002 Town Car (with NAV) 2003-2011 Town Car (without NAV) 2003-2011 Zephyr (with NAV) 2006 Zephyr (without NAV) 2006 Mercury Grand Marquis 1998-2010 Marauder 2003-2004 Mariner 2005-2011 Monterey 2004-2007 Mountaineer 2006-2010 Mountaineer(Audiophile system w sub) 2004-2005 Mountaineer(system w/ out factory sub) 2004-2005 Mountaineer 2002-2003 Sable 2008-2009 Sable (no electronic controls) 2000-2006 Sable (electronic controls) 2000-2007 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine iLX-W760 7" Receiver Bluetooth w/Carplay/Android For 2008-2010 Chrysler 300/300C Package Includes: (1) ALPINE iLX-W670 7" In-Dash Car Digital Media Receiver w/ Apple CarPlay/XM Ready (1) Metra 95-6511 Chrysler/Jeep/Dodge In-Dash Radio Double DIN Kit (1) Axxess XSVI-6522NAV 2007-2016 Chrysler Wire Harness Interface W/ Nav Outputs (1) Metra 40-EU10 2002-08 VW/BMW/European Aftermarket to Car Antenna Adaptor Alpine ILX-W670 7 Inch Mechless Ultra-shallow AV System with Apple Carplay, Android Auto The new swipe control interface is designed for easy use so that you can keep your eyes on the road. A two-finger swipe motion moving up, down, left, or right will control volume up or down and track skip forward or back. The two-finger swipe can be done anywhere on the touch screen, so you don’t need to swipe at a specific location. The iLX-W670 “Works with Apple CarPlay” lets iPhone users make and receive calls, access text messages, play music, and get directions in a way that allows them to stay focused on the road. Apple CarPlay is accessed through the capacitive touch screen or the mic button to activate Siri's voice control and is compatible with iPhone 5 and later (iPhone must be connected via Apple lightning cable). The iLX-W670 includes Android Auto and works with the Google Assistant (requires both a USB cable and Bluetooth® connection; requires an Android™ phone running 5.0 [Lollipop] or higher and the Android Auto app). To access the Google Assistant on Android Auto, say "OK Google" or select the mic button. Google Assistant in Android Auto allows users to play their favorite music, get driving directions to their destination, interact with smart home devices, and reply to text messages – hands-free. General Features: Power Handling: Peak: 50 watts x 4 channels Power Handling: RMS: 16 watts x 4 channels 7-inch anti-glare capacitive touchscreen NEW two-finger swipe user interface Works with Apple CarPlay® Works with Android Auto™ and the Google Assistant Works with Pandora® Music for iPhone® and Android™ phones AM/FM tuner with 24FM/12 AM presets The amplifier measures just 7” W x 3.5” H x 1.25” D and fit in the open space behind the iLX-W670 using the included bracket, creating the PowerStack design. Authorized Dealer 1-year Manufacturer's Warranty Navigation Features: Use with Apple CarPlay or Android Auto Playback and Audio Features: Mechless Digital Media Receiver: No CD mechanism means you have less to carry. Stream your music digitally! FLAC/MP3/WMA/AAC/HE-AAC music playback via USB 9-band parametric equalizer with selectable tone curves Rear USB Input CEA-2006 compliant amplifier Bluetooth Features: Built-in Bluetooth technology for hands-free talking and audio streaming Bluetooth Profiles Supported: HFP: Hands-Free Profile allows a hands-free car kit to connect to a compatible mobile phone PBAP: Phone Book Access Profile allows the car stereo to display the name of the incoming caller, as well as access the contact list of the mobile phone directly from the car stereo A2DP: Advanced Audio Distribution Profile allows high-quality audio to be streamed from an audio device to the car stereo AVRCP: Audio/Video Remote Control Profile supports basic remote control functions (play, pause, etc.) via Bluetooth Works with most Bluetooth-enabled cell phones Expandability Options: Combine with the Alpine KTA-450 Power Pack Amplifier (sold separately) for a PowerStack installation. The combined depth of the Alpine ILX-W670, KTA-450, and mounting brackets is still less than the depth of a standard 2-DIN chassis Steering Wheel Control Ready: PAC ControlPRO or the Axxess ASWC-1 required and sold separately Three 4-volt pre-outs allow aftermarket speakers, subwoofers, additional amplifiers, and sound processors to be added Two camera inputs allow for the addition of multiple cameras, including a rear-view camera (sold separately). SiriusXM-Ready™ (SXV300 Connect Vehicle Tuner Kit and subscription required, sold separately) What is in the iLX-W650 Package: iLX-W670 owner's manual Digital media receiver Wiring harness (15A fuse) Preout/Camera harness 42" USB extension cable Microphone Bracket 4 ISO-screws Quick Reference Guide Registration Card iLX-W670 owner's manual This Package Fits The Following Vehicles: CHRYSLER 200: 2011-2014 300/300C: 2008-2010 ASPEN 2008-2009 SEBRING 2007-2010 TOWN & COUNTRY 2008-UP DODGE AVENGER 2007-2014 CALIBER 2009-2012 CHALLENGER 2008-2014 CHARGER 2008-2010 DAKOTA 2008-2011 DURANGO 2008-2009 GRAND CARAVAN 2008-up JOURNEY 2009-2010* MAGNUM 2008-2009 NITRO 2007-2011 RAM 1500: 2009-2011 RAM 2500/3500: 2010-2011 RAM CHASSIS CAB 2011 JEEP COMPASS 2009-UP COMMANDER 2008-2010 GRAND CHEROKEE 2008-2010 PATRIOT 2009-UP LIBERTY 2008-UP WRANGLER 2007-UP* WRANGLER UNLIMITED 2007-UP* VW Routan 2009-2013 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, R-A75M 750-Watt Mono Amplifier, and Absolute KIT4 Package Includes: (1) Alpine R-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine R-A75M 750-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 $ gauge Amp Kit Alpine R-SB10V Loaded 10" 750w R-W10D4 Subwoofer Ported Sub Enclosure Box Unique to Alpine, the 10-inch subwoofer is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall excellent sound quality. The 10-inch enclosure is tuned to 36 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the R-SB10V box: Ported enclosure loaded with one R-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS) The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience. The R-Series Amplifiers have a diagnostic LED located behind the blue Alpine Jewell on the top of the amplifier. Blue light means the amplifier is operating normally. A red blinking light means the amplifier is currently too hot for operation and needs to cool down. A solid red light can mean three things: 1. The amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high. The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., Originally launched in the premium X-Series amplifiers, the R-Series amplifiers produce efficient power with enhanced dynamic range, qualifying them to be Hi-Resolution Audio compliant. General Features: Power output 2-Ohm @ 14.4 Volts: 750 W RMS X 1 Power output 4-Ohm @ 14.4 Volts: 500 W RMS X 1 THD 10 W into 4 Ohms: Less Than 0.02% THD 10 W into 2 Ohms: Less Than 0.03% THD Rated Power 4 Ohms: Less Than 0.3% THD Rated Power 2 Ohms: Less Than 1.0% S/N Ratio: 1 W into 4 Ohms: >85dB Frequency Response: +0/-3 dB 10Hz - 400Hz Frequency Response: +0/-1 dB 15Hz - 325Hz Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V) Crossover: Variable HPF/LPF, (50Hz - 400 Hz) Dimensions: Width - 10-3/4", Height - 2", Depth - 7-7/8" Weight: 7lb What is in the R-A75M box: R-A75M Mono Amplifier 4 x M4x20 Self-Tapping Screws 8 x Mounting Bracket Screws 4 x Mounting Brackets 1 x Hexagon Wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, R-A75M 750-Watt Mono Amplifier, and Absolute KIT4 Package Includes: (1) Alpine R-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine R-A75M 750-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 4 Gauge Amp Kit Alpine R-SB10V Loaded 10" 750w R-W10D4 Subwoofer Ported Sub Enclosure Box Unique to Alpine, the 10-inch subwoofer is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the R-SB10V package: Ported enclosure loaded with one R-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS) The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience. The R-Series Amplifiers have a diagnostic LED behind the blue Alpine Jewell on the top of the amplifier. Blue light means the amplifier is operating normally. A red blinking light means the amplifier is too hot for operation and needs to cool down. A solid red light can mean three things: 1. The amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high. The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., Originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant. General Features: Power output 2-Ohm @ 14.4 Volts: 750 W RMS X 1 Power output 4-Ohm @ 14.4 Volts: 500 W RMS X 1 THD 10 W into 4 Ohms: Less Than 0.02% THD 10 W into 2 Ohms: Less Than 0.03% THD Rated Power 4 Ohms: Less Than 0.3% THD Rated Power 2 Ohms: Less Than 1.0% S/N Ratio: 1 W into 4 Ohms: >85dB Frequency Response: +0/-3 dB 10Hz - 400Hz Frequency Response: +0/-1 dB 15Hz - 325Hz Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V) Crossover: Variable HPF/LPF, (50Hz - 400 Hz) Dimensions: Width - 10-3/4", Height - 2", Depth - 7-7/8" Weight: 7lb What is in the R-A75M package: R-A75M Mono Amplifier 4 x M4x20 Self-Tapping Screws 8 x Mounting Bracket Screws 4 x Mounting Brackets 1 x Hexagon Wrench Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca. 

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure, R-A75M 750-Watt Mono Amplifier& 4 Gauge KIT4 Amp Kit Package Includes: (1) Alpine R-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine R-A75M 750-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's Alpine R-SB10V Loaded 10" 750w R-W10D4 Subwoofer Ported Sub Enclosure Box Unique to Alpine, the 10-inch subwoofer is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the box: Ported enclosure loaded with one R-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier (750 Watts RMS) The new R-Series amplifiers produce accurate imaging and dependable power. Use them with the R-Series speakers and amplifiers for a loud and fun experience. The R-Series Amplifiers have a diagnostic LED behind the blue Alpine Jewell on the top of the amplifier. Blue light means the amplifier is operating normally. A red blinking light means the amplifier is too hot for operation and needs to cool down. A solid red light can mean three things: 1. The amplifier circuit is abnormal. 2. Temperature is too high. 3. Power supply voltage is too high. The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., Originally launched in the premium X-Series amplifiers, the R-Series amplifiers produce efficient power with enhanced dynamic range, qualifying them to be Hi-Resolution Audio compliant. General Features: Power output 2-Ohm @ 14.4 Volts: 750 W RMS X 1 Power output 4-Ohm @ 14.4 Volts: 500 W RMS X 1 THD 10 W into 4 Ohms: Less Than 0.02% THD 10 W into 2 Ohms: Less Than 0.03% THD Rated Power 4 Ohms: Less Than 0.3% THD Rated Power 2 Ohms: Less Than 1.0% S/N Ratio: 1 W into 4 Ohms: >85dB Frequency Response: +0/-3 dB 10Hz - 400Hz Frequency Response: +0/-1 dB 15Hz - 325Hz Input Sensitivity: Hi (0.5 - 10V), Low (0.2 - 4.0V) Crossover: Variable HPF/LPF, (50Hz - 400 Hz) Dimensions: Width - 10-3/4", Height - 2", Depth - 7-7/8" Weight: 7lb Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.     

2 Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp and Wiring - This bundle includes a pair of Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers, a pair of Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way Speakers, an Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine X-S65C X-Series 6.5 Inch Component 2-Way SpeakersCTA-2031 Specifications: 120W RMS, 360W Peak, 4 Ohm General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way SpeakersSPECIFICATIONSWoofer: 6-1/2" coneTweeter: 1" Carbon GraphiteMaximum Peak Power: 330 WattsMaximum RMS Power: 110 Wattsimpedance: 4 ohmsSensitivity: 89 dB SPL (1W @ 1m)Frequency Response: 55 Hz to 50 kHzMounting Depth/Drop-in Mounting: 2-5/16- (5.9cm)Cutout Diameter: 5-13/32- (13.7cm) circleRecommended Amplification: up to 110 watts RMS per channelWarning: Both products contain a high-performance tweeter. If there is a tweeter already installed in your car, then you must disconnect its terminals. If you leave the original tweeter connected and connect this product in parallel, then a fault may develop in this product, so you are strongly recommended not to do so. Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the X-A70M package: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet X-A70M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine Type-X Bundle 2-Pair X-S65C 6.5" Component Speaker, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit Alpine Type-X Bundle 2-Pair X-S65C 6.5" Component Speaker, X-A70F 700W 4-Ch Amp, and Wiring - This bundle includes a pair of Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers, an Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine X-S65C X-Series 6.5 Inch Component 2-Way SpeakersCTA-2031 Specifications: 120W RMS, 360W Peak, 4 Ohm General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet Alpine X-A90M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov