Products – Page 1025

Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Car Audio Subwoofer $129.99 $160.00

Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofer Rockford Fosgate showcases its fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd. Engineers at Rockford Fosgate designed the P1S4-12 12" subwoofer to dish out the kind of powerful low-end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass. The P1S4-12 sub-features an extended pole piece and bumped backplate that leaves more room for a heavy excursion, so it'll hit deeper lows without "bottoming out." This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system. General Features: 12" Single 4 ohm Punch Stage 1 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar reinforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced-strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12 Mounting Depth: 6" Cutout Diameter: 11.22" Magnet Weight: 45 oz Frequency Response: 20 - 250 Hz Xmax: 9mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.79ft³ Recommended Sealed Enclosure: 1.02ft³ Matching Amplifiers: (one subwoofer): Rockford Fosgate R750-1D, @4ohms Matching Amplifiers: (one subwoofer): Rockford Fosgate R500X1D, @4ohms Matching Amplifiers: (one subwoofer): Rockford Fosgate P300X1, @4ohms Matching Amplifier: (two subwoofers): Rockford Fosgate R750-1D, Parallel @2ohms Matching Amplifier: (two subwoofers): Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers): Rockford Fosgate P1000X1bd, Parallel @2ohms Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the package: 12" SVC 4-ohm subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual (English/ French/ Spanish/ German) Rockford Fosgate Punch P1S4-12 owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-19% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofers Subs $129.99 $160.00

Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofers Rockford Fosgate showcases its fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd. Engineers at Rockford Fosgate designed the P1S4-12 12" subwoofer to dish out the kind of powerful low-end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests, so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass. The P1S4-12 sub-features an extended pole piece and bumped backplate that leaves more room for a heavy excursion, so it'll hit deeper lows without "bottoming out." This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system. General Features: 12" Single 4 ohm Punch Stage 1 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar reinforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced-strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12 Mounting Depth: 6" Cutout Diameter: 11.22" Magnet Weight: 45 oz Frequency Response: 20 - 250 Hz Xmax: 9mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.79ft³ Recommended Sealed Enclosure: 1.02ft³ Matching Amplifiers: (one subwoofer): Rockford Fosgate R750-1D, @4ohms Matching Amplifiers: (one subwoofer): Rockford Fosgate R500X1D, @4ohms Matching Amplifiers: (one subwoofer): Rockford Fosgate P300X1, @4ohms Matching Amplifier: (two subwoofers): Rockford Fosgate R750-1D, Parallel @2ohms Matching Amplifier: (two subwoofers): Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers): Rockford Fosgate P1000X1bd, Parallel @2ohms Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P1S4-12 package: Punch P1S4-12 owner's manual 12" SVC 4-ohm subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -19% sale

Rockford Fosgate Punch P1S4-12 500W Max 12

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1S4-12 500W Max 12" Punch P1 Series Single 4-Ohm Car Subwoofer $129.99 $160.00

Rockford Fosgate Punch P1S4-12 12" 500W 4-Ohm Power Car Audio Subwoofers Rockford Fosgate showcases its fanatical commitment to sonic excellence in the Punch Series of speakers, amps, and subs. If you like to listen to potent, powerful music — and feel it too — Punch components will give you an impressive sound that'll stand out in a crowd. Engineers at Rockford Fosgate designed the P1S4-12 12" subwoofer to dish out the kind of powerful low-end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass. The P1S4-12 sub-features an extended pole piece and bumped backplate that leaves more room for a heavy excursion, so it'll hit deeper lows without "bottoming out." This sub works equally well in a sealed or ported enclosure, so you can choose the kind of bass you want for your system. General Features: 12" Single 4 ohm Punch Stage 1 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P1G-12 Mounting Depth: 6" Cutout Diameter: 11.22" Magnet Weight: 45 oz Frequency Response: 20 - 250 Hz Xmax: 9mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.79ft³ Recommended Sealed Enclosure: 1.02ft³ Matching Amplifiers: (one subwoofer): Rockford Fosgate R750-1D, @4ohms Matching Amplifiers: (one subwoofer): Rockford Fosgate R500X1D, @4ohms Matching Amplifiers: (one subwoofer): Rockford Fosgate P300X1, @4ohms Matching Amplifier: (two subwoofers): Rockford Fosgate R750-1D, Parallel @2ohms Matching Amplifier: (two subwoofers): Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers): Rockford Fosgate P1000X1bd, Parallel @2ohms Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the P1S4-12 package: Punch P1S4-12 owner's manual 12" SVC 4-ohm subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -56% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit $89.99 $199.99

Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

-41% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P2D2-10 600W 10" Punch Series Dual 2-ohm Car Subwoofer $179.99 $299.99

Rockford Fosgate Punch P2D2-10 600W Peak (300W RMS) 10" Punch Series Dual 2-ohm Car Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 10" subwoofer continues this tradition. Kevlar fiber-reinforced paper cones deliver a bass impact you can feel, and VAST technology increases surface cone area by up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. They include a diamond-cut cast aluminum trim ring. An optional grille insert is available. General Features: 10" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: RMS: 300 watts Power Handling: Peak: 600 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar reinforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced-strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 30.8 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @38.5 Hz Recommended Sealed Enclosure: 0.59ft³ @43.1 Hz Shipping Weight: 13.6 Lbs. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D2-10: Rockford Fosgate P2D2-10 owner's manual One 10" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -47% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P2D2-15 800w 15" Dual 2-Ohm Car Audio Subwoofers Subs $214.99 $400.00

Rockford Fosgate Punch P2D2-15 800w 15" Dual 2-Ohm Car Audio Subwoofers Subs Rockford Fosgate has always been known as "The PUNCH" and the P2 15" subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 15" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: 150 - 400 watts RMS (800 watts peak power) CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 7.34" Cutout Diameter: 13.9" Magnet Weight: 72.80 oz Frequency Response: 20 - 250 Hz Xmax: 13.3mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 2.66 cubic feet Recommended Sealed Enclosure: .70-1.58 cubic feet Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 20 Ibs What's in the P2D2-15 package: One 15" Dual 2-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual P2D2-15 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -47% sale

Rockford Fosgate Punch P2D2-8 2 Ohm 8-Inch 250 Watts RMS 500 Watts Peak

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P2D2-8 2 Ohm 8-Inch 250 Watts RMS 500 Watts Peak $149.99 $279.98

Rockford Fosgate Punch P2D2-8 500W Max (250W RMS) 8" Punch P2 Series Dual 2-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch" and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 0.65ft³ Recommended Sealed Enclosure: 0.23ft³ Matching Amplifiers: (one subwoofer) Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D2-8 package: P2D2-8 owner's manual One 8" Dual 2-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

-40% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P2D4-10 10" subwoofer with dual 4-ohm voice coils $179.99 $299.98

Rockford Fosgate P2D4-10 10" 1200W Car Audio Subwoofer Subwoofer Rockford Fosgate has always been known as "The PUNCH," and the P2 10" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel, along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond-cut cast aluminum trim ring. An optional grille insert is available. General Features: 10" Dual 4-ohm Punch Stage 2 Subwoofer Power Handling: RMS: 300 watts Power Handling: Peak: 600 watts Recommended power range: 250 - 375 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique Stamp Cast basket with integrated spider venting Sturdy 16-gauge compound bend frame geometry High modulus Kevlar reinforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced-strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-cast aluminum soft-touch painted trim ring allows for optional integrated grill Stamped Mesh Grille Insert Available: Rockford Fosgate P2P3G-10 Mounting Depth: 5.92" Cutout Diameter: 9.13" Magnet Weight: 66.40 oz Frequency Response: 30.8 - 250 Hz Xmax: 11.0 mm Sensitivity: 84 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ @38.5 Hz Recommended Sealed Enclosure: 0.59ft³ @43.1 Hz Shipping Weight: 13.6 Lbs. Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-10: Rockford Fosgate P2D4-10 owner's manual One 10" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -56% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P2D4-15 15" 800 Watts $214.99 $479.98

Rockford Fosgate Punch P2D4-15 Punch P2 DVC 4 Ohm 15-Inch 400 Watts RMS 800 Watts Peak Rockford Fosgate has always been known as "The PUNCH," and the P2 15" subwoofer continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available. General Features: 15" Dual 4 ohm Punch Stage Subwoofer Power Handling: Recommended power range: 150 - 400 watts RMS (800 watts peak power) CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST; Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Mounting Depth: 7.34" Cutout Diameter: 13.9" Magnet Weight: 81 oz Frequency Response: 20.9 - 250 Hz Xmax: 12.2mm Sensitivity: 86 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 2.66 cubic feet Recommended Sealed Enclosure: 1.3 to 3.5 cubic feet Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 20 Ibs What's in the P2D4-15 package: P2D4-15 owner's manual One 15" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual

Sold out -47% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P2D4-8 $149.99 $279.98

2 Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual

Sold out -3% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P300-12 Single 12" subwoofer enclosure with 300-watt amp $389.99 $399.99

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or saving space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom-sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground, and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between the woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn-on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low-current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation Manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -3% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate Punch P300-12 Single 12" subwoofer enclosure with 300-watt amp + Blue Amp kit $389.99 $399.99

Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included + Blue Amp Kit The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. General Features: 12" Punch Series Subwoofer Power Handling: Peak: 600 watts RMS: 300 watts Proprietary woofer optimized by Rockford Fosgate for this enclosure CEA-2031 Compliant Klippel Verified Proprietary spider venting/cooling technique StampCast basket with integrated spider venting High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all-metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar Frequency response: 35-150 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty Enclosure General Features: Rockford Fosgate Sealed Enclosure "Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure Universal vehicle fitment 5/8" MDF Box material Covered with industrial heat-activated vinyl Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H Weight: 29.6 Lbs. (approx) Amplifier General Features: 300 Watt Class-D monoblock CEA-2006 Compliant Remote bass level control included Intelligent auto turn on/off function Gain and bass boost control Built-in adjustable bass boost EQ Built-in 0°/180° phase switch Variable 50Hz to 200Hz @ 12dB/Octave Butterworth Removable Connector Power/Ground/Remote Thermal and over-voltage protection High-efficiency, low current design Low-Level & High-Level Inputs Low-Level: 1 RCA Pair High-Level: Left/Right Summed Inputs What is in the box: Rockford Fosgate Punch P300-12 owner's manual Subwoofer enclosure loaded with one 12" woofer and built-in amplifier Four 10 amp ATO fuses (two installed in enclosure/ two spare) Removable power plug 10" Signal input harness 3mm Allen wrench Remote Punch Level Control Metal mounting bracket (for Punch Level Control) 17.5' Punch Level Control cable (3.5mm plug on both ends) Two 3/8" Punch Level Control mounting screws Hook and Loop mounting straps Installation and Operation manual (English/ French/ Spanish/ German/ Italian) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

1023 1024 1025 1026 1027

NATIONWIDE DELIVERY

At Absolute Pro Music, we are glad to ship to most countries! Check our list.

SECURE SHOPPING

We takes credit card information security seriously, we have implemented a variety of technical and procedural controls to ensure transactions on our site remain private and protected.

SHOP WITH CONFIDENCE

Absolute Pro Music wants to make sure that you are completely satisfied. If for some reason you aren't happy with product(s) and want to return it, we make returns simple.

HELP CENTER

You can simply give us a call at +1 800.674.27.24 , and our support staff will answer your call immediately! Explain your issue, what you'd like to change, or what you'd like to add onto your phone system, and get help in real time.

Absolute Pro Music

35 years providing the best sound experience to vibe, to share and simply to live !

Shop Car Audio & Video Pro Audio & Dj Equipment Marine Audio & Electronics Home Audio & Video Musical Instruments Packaging & Shipping Supplies Top Brands

Quick Links About Us Contact us Shipping & Returns Return policies In-Vehicle Videos related Laws Fits My Car Privacy Notice

Blogs Newsletter News DJ Equipment Guide Car Speakers, Sub-woofers and Amplifiers Guide

Top Brands Absolute USA Rockford Fosgate Alpine Pioneer

Find anything you need

Products (13614)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER