Products – Page 1015

Rockford Fosgate (2) Punch P3D2-12 12" 2400 Watt Dual 2 Ohm Car Subwoofers Subs $439.98

Rockford Fosgate (2) Punch P3D2-12 12" 2400 Watt Dual 2 Ohm Car Subwoofers Subs General Features: Two NEW **ROCKFORD FOSGATE P3D2-12** 12" 2400 Watt 2-Ohm DVC Car Audio Subwoofers 1200 Watts MAX per sub (2400 watts per pair) 600 Watts RMS per sub (1200 watts per pair) Anodized aluminum heat sinking cone and dust cap High temp voice coil with spun laced Nomex insulating reinforcement collar Details: These two new **Rockford Fosgate P3D2-12** Car Audio subwoofers feature 1200 Watts of MAX power each (2400 watts per pair) and 600 Watts of RMS power each (1200 watts per pair). The dual voice coil design gives many wiring options to ensure you get the most from your amplifier. Other features include: VAST technology, which increases cone surface area by up to 25%, a FlexFit basket for extreme installations, an Anodized Aluminum Voice Coil Former that provides superior heat dissipation (up to 100° at full power levels), a new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance, Stitched Tinsel Leads that reduces fatigue and possible shorting while increasing reliability and performance. This sub conforms to CEA-2031 industry standards to offer the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils. If you are looking for thumping bass, look no further than the Rockford Fosgate P3D2-12 12" 2400 Watt 2-Ohm Punch Series Subwoofers! ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -47% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 1" 120 Watt Dome Car Audio Stereo Tweeter Systems (6 Pack) $539.94 $999.99

6 Pair Rockford Fosgate Punch P1T-S 240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit The Punch P1T-S is a 1” PEI dome tweeter kit designed for natural sound reproduction rated at 60 Watts RMS. The kit includes high-pass crossovers, mounting hardware, and three bezels for flush, surface, and angle configurations. Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and 3 mounting bezels to accommodate various installations. General Features: 1" Punch Series Tweeter Kit Power Handling: Peak: 240 watts per pair / 120 watts each RMS: 120 watts per pair / 60 watts each Recommended power range: 10 - 60 watts RMS per channel Butyl rubber surround PEI dome tweeter Recessed tweeter mount uses standard 1-3/4" hole saw DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximum ease of installation. Grilles and mounting hardware included High Pass: 3,500 Hz 12dB/octave Butterworth Sensitivity: 90dB Frequency Response: 3,500-22,000 Hz Mounting Depth: 1/2" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: Rockford Fosgate Punch P1T-S owner's manual Two 1" tweeters (with attached 6" speaker wire terminated with female quick-slide connectors) 2 Crossovers 2 Front flush mount brackets 2 Rear flush mount brackets 2 Surface mounting housings 2 Trim rings Two M4x25mm Machine screws Two M4x10mm Machine screws Two M4x16mm Stud bolts Two 40" Lengths of speaker wire (each with male quick slides on one end and female quick slides on the other) Two 40" Lengths of speaker wire (each with female quick slides on one end and bare wire on the other) Four 7" Zip ties Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian) ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -38% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 1.5" Horn 100 Watt Heavy Duty Car Power Bullet Tweeter PP4-T $99.99 $159.99

Rockford Fosgate Punch Pro PP4-T 1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil The Pro PP4-T is a 1.5” 4-Ohm tweeter engineered specifically for high SPL (Sound Pressure Level) conditions. It features 50 watt RMS power handing and includes mounting hardware. The PP4-T Punch Pro is a 1.5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions. The oversized motor structure and high power diaphragm, combined with a billet machined aluminum phase plug create the foundation for a highly sensitive speaker that can handle plenty of power. You'll be proud because these things are loud! The package includes mounting hardware. General Features: Aluminum diaphragm Billet stock machined aluminum phase plug High Temp Kapton Former Voice Coil Die-Cast Aluminum Housing All Metal Input Spring Terminal Connection 1-1/2" Punch Series Car Tweeter Power Handling: Peak: 100 watts RMS: 50 watts Recommended power range: 15 - 50 watts RMS 4 ohms impedance, also available in 8 ohms Machined Aluminum bullet tweeter construction High-temperature voice coil Integrated 6dB high-pass crossover filter Flush mountable basket design CEA-2031 compliant tweeter Designed for high SPL systems Sensitivity: 105dB Frequency response: 4,000-20,000 Hz Top-mount depth: 2-5/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Rockford Fosgate PP4-T owner's manual One tweeter Four 1" Self-tapping Allen head screws 3mm Allen head bit ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -41% sale

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter $59.99 $99.99

Rockford Fosgate RF-HLC4 4 Channel High to Low RCA Level Output Radio Converter The RF-HLC4 is a 4-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts the high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality. General Features: RCA Level Output Speaker Level Input 4-channel line output converter input: up to 10.5-volt (about 27 watts) output: up to 3 volts includes ground leads to reduce noise if necessary dimensions: 4-15/16"W x 1-1/16"H x 3-1/16"D warranty: 1 year What's in the box: Rockford Fosgate RF-HLC4 owner's manual 4-Channel high-level to low-level signal converter 12" Speaker-level harness Instructions on packaging ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -41% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter $59.99 $99.99

Rockford Fosgate RF-HLC4 4 Channel High to Low RCA Level Output Radio Converter The RF-HLC4 is a 4-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts the high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality. General Features: RCA Level Output Speaker Level Input 4-channel line output converter input: up to 10.5-volt (about 27 watts) output: up to 3 volts includes ground leads to reduce noise if necessary dimensions: 4-15/16"W x 1-1/16"H x 3-1/16"D warranty: 1 year What's in the box: Rockford Fosgate RF-HLC4 owner's manual 4-Channel high-level to low-level signal converter 12" Speaker-level harness Instructions on packaging ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -50% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter $50.99 $99.99

Rockford Fosgate RF-HLC4 4 Channel High to Low RCA Level Output Radio Converter The RF-HLC4 is a 4-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts the high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality. General Features: RCA Level Output Speaker Level Input 4-channel line output converter input: up to 10.5-volt (about 27 watts) output: up to 3 volts includes ground leads to reduce noise if necessary dimensions: 4-15/16"W x 1-1/16"H x 3-1/16"D warranty: 1 year What's in the box: Rockford Fosgate RF-HLC4 owner's manual 4-Channel high-level to low-level signal converter 12" Speaker-level harness Instructions on packaging ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Sold out -41% sale

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter RF-HLC4

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 Channel High to Low RCA Level Output Radio Converter RF-HLC4 $59.99 $99.99

Rockford Fosgate RF-HLC4 4 Channel High to Low RCA Level Output Radio Converter The RF-HLC4 is a 4-channel high-level to low-level signal converter designed for factory or aftermarket radios that do not have dedicated low-level RCA outputs. The adapter converts the high-level signal from the radio's speaker line and transforms it into a safer low-level audio signal. This allows you to add a 4-channel amplifier to your system for higher power output and better sound quality. General Features: RCA Level Output Speaker Level Input 4-channel line output converter input: up to 10.5-volt (about 27 watts) output: up to 3 volts includes ground leads to reduce noise if necessary dimensions: 4-15/16"W x 1-1/16"H x 3-1/16"D warranty: 1 year What's in the box: Rockford Fosgate RF-HLC4 owner's manual 4-Channel high-level to low-level signal converter 12" Speaker-level harness Instructions on packaging ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

-34% sale

Rockford Fosgate 4 x PLC2 Punch Remote Level Control w/ input Clip Indicator LED 4 Pack

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 4 x PLC2 Punch Remote Level Control w/ input Clip Indicator LED 4 Pack $199.96 $299.99

4 Rockford Fosgate PLC2 Punch Remote Level Control w/Input Clip Indicator LED Show One Size Wired remote Punch Level Control for select 2013 and newer Punch and Power amplifiers. Remote Level Control offers remote level control of the amplifier. Once the onboard gain control is set, the PLC2 can attenuate (and not increase) the level from that point. Cable and mounting hardware included. For use with select 2013 and newer PUNCH and POWER amplifiers General Features: Rockford Fosgate PLC2 Punch Remote Level Control (Pair) wired remote level control and clip light Enhances onboard gain control Compatible with 2013 and newer Punch amplifiers Dual function LED (power/clipping) 20 Feet Wiring 0 20 dB Includes remote knob, cable, mounting clip, and mounting screws For use with compact 2013 and newer PUNCH amplifiers. Product Condition: Brand New works with the following 2013-up Rockford Fosgate Punch amplifiers: P300X1, P400X1, P500X1bd, and P1000X1bd mono amps P300X2, P400X2, P500X2, and P1000X2 2-channel amps P600X4 4-channel amp P1000X5 5-channel amp 18' remote cable and mounting hardware included dimensions: 1-7/16"W x 1-1/4"H x 1-5/8"D (2-5/8"D with knob and cable) What is in the PLC2 box: Rockford Fosgate Punch Level Control remote module 18' remote cable with RJ-45 connectors on each end Mounting bracket Two 1/2" Mounting screws LED with attached 8" harness (used when mounting the knob without its housing) Additional front panel Flat washer Nut PLC2 owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -12% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier $459.99 $519.00

Rockford Fosgate 600W Punch Series 4-Channel Stereo Class AB Car Power Amplifier The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels. The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls. Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Punch Series 4-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 75 watts x 4 channel 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel MOSFET power supply Remote bass level input (remote level control sold separately) LED power, thermal, and protect indicators Tuned Bass EQ (0-18 dB bass boost at 45 Hz or 0-14 dB bass boost at 12 kHz depending on crossover selection) On-board differential inputs eliminate noise picked up by the signal cable 4/3/2 or Mono channel operation Integrated Trans ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality RCA Pass-thru outputs MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals Variable high-pass filter (50-250 Hz, Butterworth, 12 dB/octave) Variable low-pass filter (50-250 Hz, Butterworth, 12 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-20000 Hz Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H What is in the box: 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P600X4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.ca.gov

Sold out -29% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate 6x8" Front+Rear Factory Speaker Replacement Kit For 2007 Ford Mustang $199.98 $279.99

Rockford Fosgate R168X2 6x8 Inch x 2 + 2 METRA 72-5600 Front+Rear Speaker Replacement For 2007 Ford Mustang Package Includes:(2) Pair Rockford Fosgate R168X2 6" x 8" 6x8 220 Watt 2-Way Car Audio Speakers(2) METRA 72-5600 For 2007 Ford Mustang Sport Trac Speaker Wire Harness Connector Rockford Fosgate R168X2 6x8 Inch 110 Watt Prime 2 Way Speakers The R168X2 is a 6”x8” 2-way full-range speaker rated at 55 watts RMS for a new generation of factory replacement speakers. Kit includes integrated high-pass crossovers and mounting hardware. The 6"x8" Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones and a silk dome tweeter. General Features: 6" x 8" / 5" x 7" 2-Way PRIME Series Coaxial Speakers Power Handling: Peak: 220 watts per pair / 110 watts each RMS: 110 watts per pair / 55 watts each Recommended power range: 10 - 55 watts RMS per channel Polypropylene mid-woofer cone material Rubber speaker surround CEA-2031 compliant speakers 1/2" Silk balanced dome tweeter Stamped steel basket Nominal impedance: 4 ohms Integrated crossover system for tweeter protection Mounting hardware is included Klippel verification optimized components for the best possible performance Frequency Response: 51-20,000 Hz Top-mount depth: 2-9/16" Sensitivity: 87dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-Way speakers Two 15' Lengths of speaker wire (each has female quick slides on one end and tinned bare wire on the other) Eight 1" Screws 8 Speed clips Installation/Operation manual (English/ French/ Spanish/ German/ Italian) 2 Pair Metra 72-5600 Speaker Connector Harness for Select Ford GM Chevy Lincoln Mercury Mazda (2 pair) Replacement Harness: Avoid cutting up your factory speaker connectors when installing aftermarket speakers! Our speaker harness adapters are designed to plug directly into the existing factory speaker connector eliminating the guesswork of matching up the correct polarity and they will not affect your factory vehicle warranty. Each package includes 2 harnesses that are needed to install 1 pair of speakers. Compatible WithChevroletCamaro 2010-2015Colorado (w/ 7" MyLink radio, RPO code: IOB) 2017Colorado 2015-2017Silverado 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017Silverado 1500 2014-2017Silverado 2500HD, 3500HD 2015-2017Suburban 2015-2017Tahoe 2015-2017FordCrown Victoria 1998-2011Edge 2007-2010Escape 2008-2012Escape (w/ out sub) 2004-2007Escape (seven speaker system w sub) 2004-2007Escape Hybrid 2004-2007Escape 2001-2003Excursion 2000-2005Expedition 2007-2014Expedition Non NAV 2004-2006Expedition with factory NAV 2004-2006Expedition (late production) with factory NAV 2003Expedition (late production) 2003Expedition (early production) 2003Expedition 1999-2002Expedition (fleet) 2015Expedition (SSV) 2015Explorer 2005-2010Explorer (Audiophile system w sub) 2004-2005Explorer 2002-2003Explorer Sport Trac 2001-2010F-150 2004-2008F-250/350/450/550 2017F-250/350/450/550 (with 8.4-inch screen) 2013-2016F-250/350/450/550 (without 8.4-inch screen) (with CD) 2013-2016F-250/350/450/550 XL (without CD) 2013-2016F-250/350/450/550 1999-2012F-250 1998F-650/750 (AM/FM/CD) 2016-2017F-650/750 (AM/FM) 2016-2017F-650/750 2000-2015Focus (without MyFordTouch) 2012-2014Focus 2000-2007Focus (with Blaupunkt radio) 2003-2004Freestar 2004-2007Fusion 2006-2009Mustang 2010-2014Mustang (late 2008 build date) 2008-2009Mustang (early 2008 build date) 2008Mustang 2005-2007Ranger 1998-2011Taurus (without electronic controls) 2000-2007Taurus (with electronic controls) 2000-2007Thunderbird 2002-2005Transit Connect 2010-2011GMCCanyon (w/ 7" MyLink radio, RPO code: IOB) 2017Canyon 2015-2017Sierra 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017Sierra 1500 2014-2017Sierra 2500HD, 3500HD 2015-2017Yukon / Yukon XL 2015-2016Yukon Denali / Yukon XL Denali 2015-2016LincolnAviator (with NAV) 2003-2005Aviator (without NAV) 2003-2005Mark LT 2005-2008MKX (with NAV) 2007-2010MKX (without NAV) 2007-2010MKZ (with NAV) 2007-2009MKZ (without NAV) 2007-2009Navigator (with NAV) 2007-2014Navigator (without NAV) 2003-2014Navigator (with NAV) (w/ THX audio) 2003-2006Navigator (with NAV) (w/o THX audio) 2003-2006Navigator (early production) 2003Navigator 1999-2002Town Car (with NAV) 2003-2011Town Car (without NAV) 2003-2011Zephyr (with NAV) 2006Zephyr (without NAV) 2006MazdaB-Series Pickup 1998-2009Mazda3 2004-2009Tribute 2008-2011Tribute 2001-2006MercuryGrand Marquis 1998-2010Marauder 2003-2004Mariner 2005-2011Monterey 2004-2007Mountaineer 2006-2010Mountaineer(Audiophile system w sub) 2004-2005Mountaineer(system w/ out factory sub) 2004-2005Mountaineer 2002-2003Sable 2008-2009Sable (no electronic controls) 2000-2006Sable (electronic controls) 2000-2007 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -24% sale

Rockford Fosgate DSR1 8-Channel Digital Signal Processor

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate DSR1 8-Channel Digital Signal Processor $419.99 $549.99

Rockford Fosgate DSR1 8-Channel Digital Signal Processor Rockford Fosgate DSR1 Digital signal processor with Maestro AR amp replacement module add an aftermarket amp without losing important features Upgrade your system Your car computer controls its audio system, so upgrading the sound has to include integrating with your car's digital network. Rockford Fosgate's DSR1 combines an integration module with a full-featured digital signal processor so you can add an aftermarket amplifier without losing any of your factory controls or audio notifications, and achieve the high-fidelity sound the system lacked. A simpler way In the past, in order to upgrade a factory system you'd have to first sum all the outputs, reduce the signal strength to line-level, remove the factory EQ and crossover settings, and then apply your custom audio processing and amplification. The DSR-1 simplifies this process by using the unprocessed line-level signals from the factory receiver, so you can tune the sound without fighting the factory settings. Your factory radio still works like it always has, and you retain all your vehicle's features. Rockford Fosgate + iDatalink Maestro = good times The DSR1 includes an iDatalink Maestro AR amplifier replacement module, which can use a vehicle-specific T-harness (sold separately) to supply a clean audio signal plus digital control data to the processor. Using a Windows PC, you go to iDatalink's website and download the firmware for your specific vehicle to your DSR1. It will then be able to translate your vehicle's digital instructions, like turning down the music and making only one speaker active during Bluetooth calls, for example. Fine-tune your sound via your mobile device The DSR1 uses the same technology as Rockford Fosgate's 3Sixty.3 digital signal processor to help you obtain and enjoy amazing sound quality from your vehicle's sound system. After connecting — via Bluetooth to an iOS or Android device — and loading the PerfectTune app, the main user interface screen displays your speaker configuration, an EQ graph, the EQ controls, and more. 8 channels handles almost any system Each channel has its own crossover network, level adjustment, time alignment setting, polarity switch, and 31 bands of equalization, so there's no excuse for anything but perfect sound. The DSR1 offers eight output channels of processed signal for your amplifiers to send on to your tweeters, speakers, and subs.Note: The DSR1 bypasses all factory amplification — compatible aftermarket amplifiers required.Important Note: This Rockford Fosgate processor can either be used with an iDatalink harness in "Vehicle-specific" mode, or it can operate without needing a vehicle-specific harness in "Universal" mode, when upgrading a standard, non-premium factory or aftermarket system. See "Configuration Menu" under the Details tab for more information. Product highlights: digital signal processor with factory digital amplifier replacement module add an aftermarket amplifier without losing any factory controls or audio notifications requires Windows PC with internet connection to download vehicle-specific firmware to the module includes iDatalink Maestro AR interface to retain factory premium audio features works with an optional vehicle-specific T-harness (sold separately) supplies control data as well as audio preamp and speaker-level inputs for use with a non-premium system and no vehicle-specific harness Digital Processing: digital processing technology from Rockford Fosgate's 3Sixty.3 processor digital processing: 147 MIPS speed, 32-bit precision, 72-bit accumulators analog to digital: 24-bit precision, 105 dB dynamic range, -98 dB THD+N digital to analog: 24-bit precision, 108 dB dynamic range, -98 dB THD+N settings and adjustments made via Bluetooth connection to a iOS or Android device running PerfectTune app 8 assignable inputs 4 auxiliary RCA and 1 optical TOSLINK (S/PDIF) inputs 8 preamp outputs (up to 4 volts) 31-band parametric EQ on all channels crossover filters can be set as all-pass, high-pass, low-pass, bandpass, high-shelf, or low-shelf filters selectable slopes and filter characteristics phase switch on every channel dimensions: 5-1/16"W x 1-1/4"H x 4"W warranty: 1 year Digital signal processor 7" microUSB-to-USB cable 18-pin input harness 16-pin output harness Quick-start guide ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Sold out -37% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Rockford Fosgate DSR1 8-Channel Digital Signal Processor $349.99 $549.99

Rockford Fosgate DSR1 8-Channel Digital Signal Processor Rockford Fosgate DSR1 Digital signal processor with Maestro AR amp replacement module adds an aftermarket amp without losing important features. Upgrade your system Your car computer controls its audio system, so upgrading the sound has to include integrating it with your car's digital network. Rockford Fosgate's DSR1 combines an integration module with a full-featured digital signal processor so you can add an aftermarket amplifier without losing any of your factory controls or audio notifications and achieve the high-fidelity sound the system lacked. A simpler way In the past, in order to upgrade a factory system, you'd have first to sum all the outputs, reduce the signal strength to line level, remove the factory EQ and crossover settings, and then apply your custom audio processing and amplification. The DSR-1 simplifies this process by using the unprocessed line-level signals from the factory receiver, so you can tune the sound without fighting the factory settings. Your factory radio still works like it always has, and you retain all your vehicle's features. Rockford Fosgate + iDatalink Maestro = good times The DSR1 includes an iDatalink Maestro AR amplifier replacement module, which can use a vehicle-specific T-harness (sold separately) to supply a clean audio signal plus digital control data to the processor. Using a Windows PC, you go to iDatalink's website and download the firmware for your specific vehicle to your DSR1. It will then be able to translate your vehicle's digital instructions, like turning down the music and making only one speaker active during Bluetooth calls, for example. Fine-tune your sound via your mobile device The DSR1 uses the same technology as Rockford Fosgate's 3Sixty.3 digital signal processor to help you obtain and enjoy amazing sound quality from your vehicle's sound system. After connecting — via Bluetooth to an iOS or Android device — and loading the PerfectTune app, the main user interface screen displays your speaker configuration, an EQ graph, the EQ controls, and more. Eight channels handle almost any system Each channel has its own crossover network, level adjustment, time alignment setting, polarity switch, and 31 bands of equalization, so there's no excuse for anything but perfect sound. The DSR1 offers eight output channels of processed signal for your amplifiers to send on to your tweeters, speakers, and subs. Note: The DSR1 bypasses all factory amplification—compatible aftermarket amplifiers are required.Important Note: This Rockford Fosgate processor can either be used with an iDatalink harness in "Vehicle-specific" mode, or it can operate without needing a vehicle-specific harness in "Universal" mode when upgrading a standard, non-premium factory, or aftermarket system. See "Configuration Menu" under the Details tab for more information. General Features : digital signal processor with factory digital amplifier replacement module add an aftermarket amplifier without losing any factory controls or audio notifications requires Windows PC with an internet connection to download vehicle-specific firmware to the module includes iDatalink Maestro AR interface to retain factory premium audio features works with an optional vehicle-specific T-harness (sold separately) supplies control data as well as audio preamp and speaker-level inputs for use with a non-premium system and no vehicle-specific harness Digital Processing: digital processing technology from Rockford Fosgate's 3Sixty.3 processor digital processing: 147 MIPS speed, 32-bit precision, 72-bit accumulators analog to digital: 24-bit precision, 105 dB dynamic range, -98 dB THD+N digital to analog: 24-bit precision, 108 dB dynamic range, -98 dB THD+N settings and adjustments made via Bluetooth connection to an iOS or Android device running the PerfectTune app Eight assignable inputs Four auxiliary RCA and one optical TOSLINK (S/PDIF) inputs Eight preamp outputs (up to 4 volts) 31-band parametric EQ on all channels crossover filters can be set as all-pass, high-pass, low-pass, bandpass, high-shelf, or low-shelf filters selectable slopes and filter characteristics phase switch on every channel dimensions: 5-1/16"W x 1-1/4"H x 4"W warranty: 1 year Digital signal processor 7" micro USB-to-USB cable 18-pin input harness 16-pin output harness Quick-start guide ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Products (13678)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER