Products (12183)

Xvive Audio U2 Digital Wireless System 2.4 GHz for Guitars - Black THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface.PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone!TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. PPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System!UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    YesRECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes   U2 Guitar Wireless System U2 Complete System - Black     Compact and lightweight plug-and-play wireless system for guitars, basses and other instruments     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2 Digital Wireless System 2.4 GHz for Guitars - Carbon THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface.PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone!TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. APPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System!UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    Yes RECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 oz BATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes   U2 Guitar Wireless System U2 Complete System - Carbon     Compact and lightweight plug-and-play wireless system for guitars, basses and other instruments     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2 Digital Wireless System 2.4 GHz for Guitars - Gold THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface.PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone!TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. APPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System!UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    Yes RECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 oz BATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes   U2 Guitar Wireless System U2 Complete System - Gold     Compact and lightweight plug-and-play wireless system for guitars, basses and other instruments     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2 Digital Wireless System 2.4 GHz for Guitars - Red THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface.PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone!TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. PPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System!UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    YesRECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes   U2 Guitar Wireless System U2 Complete System - Red     Compact and lightweight plug-and-play wireless system for guitars, basses and other instruments     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2 Digital Wireless System 2.4 GHz for Guitars - Silver THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface.PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone!TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. PPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System!UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    YesRECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes   U2 Guitar Wireless System U2 Complete System - Silver     Compact and lightweight plug-and-play wireless system for guitars, basses and other instruments     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2 Digital Wireless System 2.4 GHz for Guitars - Tone Sunburst THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface.PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone!TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. APPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System!UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    Yes RECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 oz BATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes   U2 Guitar Wireless System U2 Complete System - Tone Sunburst     Compact and lightweight plug-and-play wireless system for guitars, basses and other instruments     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2R Receiver Used with a U2 Transmitter THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface. PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone! TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. APPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System! UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    YesRECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes U2 Guitar Wireless SystemU2T Transmitter - Black     Compact and lightweight transmitter for sending a wireless signal to a U2 Receiver     Add to a complete U2 system when using two or more instruments on a gig     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Model Number: U2TBLACK Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U2T Transmitter Used with a U2 Receiver THE SYSTEM The system is comprised of a transmitter unit, which connects to your audio source (typically an electric guitar or bass); and a receiver, which is connected to an amplifier, effect pedal/pedalboard, DI box or audio interface. PRESERVE YOUR TONE The U2 system features crystal-clear 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Going wireless with the U2 system will not compromise your precious tone! TAKE CHARGE The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used. APPLICATIONS U2 can be used to replace any ¼” instrument cable. The most common application is to run a guitar or bass, wirelessly, to an amplifier—in a live performance, at home or in the studio. But there’s a lot more you can do with the U2 System! UNCHAINED Especially if you feel most comfortable with your instrument in hand, going wireless at home is truly liberating. Wander from room to room, sit anywhere, stretch your legs… you’re free. When recording at home or in the studio, having less cables means no tangles—and no tonal compromise thanks to the system’s 24-bit audio. QUICK SWITCH If you have more than one transmitter, you can keep one connected to each guitar; and when switching guitars, just power off the transmitter before you take off the first guitar, then power on the second unit as you strap on the second guitar. Just make sure all units are set to the same channel! Specifications WIRELESS TYPE    2.4 GHz ISM worldwide open band BIT DEPTH/SAMPLE RATE    24-bit / 48 kHz SWITCHABLE CHANNELS    4 SIMULTANEOUS CHANNELS    4 FREQUENCY RESPONSE    20 Hz – 20 kHz (-3dB) DYNAMIC RANGE    103 dB (-3 dB) SIGNAL-TO-NOISE RATIO    103 dB TOTAL HARMONIC DISTORTION    0.2% LATENCY    5 ms OPERATING RANGE    21.3 m / 70 ft (line-of-sight)TRANSMITTER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40.7 g / 1.43 oz MUTE    YesRECEIVER      CONNECTOR    1/4" TS DIMENSIONS    75 x 44 x 30 mm / 2.95" x 1.73" x 1.18" (with plug extended, L: 123 mm / 4.84") WEIGHT    40 g / 1.41 ozBATTERY      TYPE    Rechargeable Lithium-ion (internal) BATTERY LIFE    5 hours CHARGING TIME    2 hrs (full charge) CHARGING VOLTAGE    5V (USB) USABLE WHILE CHARGING    Yes U2 Guitar Wireless SystemU2T Transmitter - Black     Compact and lightweight transmitter for sending a wireless signal to a U2 Receiver     Add to a complete U2 system when using two or more instruments on a gig     High-fidelity 24-bit / 48 kHz digital audio     Ultra-low latency of 5 ms     Wireless signal broadcasts on the 2.4 GHz band over a range of 70 ft     Onboard rechargeable lithium battery lasts for 5 hours Model Number: U2TBLACK Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3 2.4 GHz Microphone Wireless System THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz U3 Microphone Wireless System U3 Complete Dynamic System     High-fidelity plug-and-play wireless system for dynamic microphones     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet   Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3C 2.4 GHz Complete Condenser System THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz   U3 Microphone Wireless System U3C Complete Condenser System     High-fidelity plug-and-play wireless system for condenser microphones     Provides 12V or 48V phantom power to any connected condenser microphone     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet       Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3 2.4 GHz Microphone Wireless System THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications Use a pair dynamic microphones at the same time or send audio to active speakers with the Xvive U3D digital wireless audio system. Operating in the 2.4 GHz wireless band, with a 20 Hz to 20 kHz frequency response and less than 5 ms latency, the U3D can be used by presenters, performers, and DJs for a wide variety of applications.     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz U3 Microphone Wireless System U3 Complete Dynamic System     High-fidelity plug-and-play wireless system for dynamic microphones     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet   Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Xvive Audio U3R 2.4 GHz Dynamic Receiver THE SYSTEM The system is comprised of a transmitter unit, which connects to your microphone; and a receiver, which connects to a mixer, sound interface, preamp, XLR cable or snake.YOUR TRUE VOICE The U3 system features high-resolution, 24-bit / 48 kHz audio, with a very wide and smooth frequency response between 20 Hz and 20 kHz and a signal-to-noise ratio of 107 decibels. Sing or speak without compromising the quality of your voice or your microphone!HOLD ON TO POWER The internal battery in both the transmitter and the receiver lasts for 5 hours. Both units can be easily charged at the same time using the included dual-USB cable and any standard 5V USB charger—and charging takes between 1.5 and 2.5 hours depending on the current of the charger being used.singer with u3APPLICATIONS The basic application is to run wirelessly from a dynamic microphone to a soundboard—live, at home or in the studio. But there’s a lot more you can do with the U3 System!FREE VOICE The U3 system is not only great for singers and rappers. Wireless freedom is liberating for harmonica players, public speakers, DJs, preachers, auctioneers, actors, politicians… anyone who wants to move freely while speaking or performing to an audience!BYPASS THE MIXER If you need to address a crowd through powered speaker cabinets, not only do you not need a cable, you don’t need a mixer! Just connect your U3 receiver directly to the XLR input of the cabinet.CONTROL YOUR RANGE The U3 receiver can be connected to an XLR cable or snake, meaning that the transmitter’s signal doesn’t have to reach all the way to the soundboard or monitor desk—it can broadcast to the front of the stage, or any central and convenient location.U3 receiver in mixerGET AMPED Beyond all the vocal applications, the U3 system can also be used with microphones for guitar amplifiers, as well as direct audio signals from balanced XLR outputs, for example from multi-effect processors or keyboards.PA FRIEND Run wirelessly from a PA mixing console to a powered main speaker, avoiding the hassles and risks of running speaker cables across a crowded venue! You can also run wirelessly between powered mains or between powered monitors. For stereo and multiple mono PA and DJ systems, check out the U3D!WIRELESS, CONDENSED The U3C is a version of the U3 designed for condenser microphones, and any other sound sources that require 48V or 12V of phantom power (such as active DI boxes or preamps that don’t supply phantom power).FREE INSTRUMENTS Use the U3 to roam free with any instrument that requires a microphone or clip-on microphone, such as harmonicas, violins, trumpets, saxophones and accordions! Make sure to choose the U3C if you use a condenser microphone. FREEDOM ON VIDEO The U3 system can be used to connect microphones to DSLR cameras—provided you have an adapter to run between the XLR receiver and the camera’s (usually 3.5 mm) audio input. Remember to use the U3C when connecting condenser microphones.Specifications     U3     U3C WIRELESS TYPE     2.4 GHz ISM worldwide open band     2.4 GHz ISM worldwide open band BIT DEPTH / SAMPLE RATE     24-bit / 48 kHz     24-bit / 48 kHz SWITCHABLE CHANNELS     6     6 SIMULTANEOUS CHANNELS     6     6 MODE     Input: Mic / Line     Phantom Power: 12V / 48V FREQUENCY RESPONSE     20 Hz – 20 kHz (-3dB)     20 Hz – 20 kHz (-3dB) DYNAMIC RANGE     110 dB (-3 dB)     103 dB (-3 dB) MICROPHONE COMPATIBILITY     Dynamic and battery-powered condenser microphones     Condenser microphones SIGNAL-TO-NOISE RATIO     110 dB     110 dB TOTAL HARMONIC DISTORTION     0.2%     0.2% LATENCY     5 ms     5 ms OPERATING RANGE     27.5 m / 90 ft (line-of-sight)     27.5 m / 90 ft (line-of-sight) Battery      TYPE     Rechargeable Lithium-ion (internal)     Rechargeable Lithium-ion (internal) BATTERY LIFE     5 hrs     3-7 hrs CHARGING TIME     2.5 hrs (full charge)     2.5 hrs (full charge) CHARGING VOLTAGE     5V (USB)     5V (USB) USABLE WHILE CHARGING     Yes     Yes Transmitter      MODEL     U3T     U3CT POWER     N/A     12V / 48V (onboard phantom) MODE     Input: Mic / Line     Phantom Power: 12V / 48V CONNECTOR     XLR (female)     XLR (female) DIMENSIONS     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1"     31 x 29 x 98 mm / 3.9" x 1.2" x 1.1" WEIGHT     93 g / 3.3 oz     107.73 g / 3.8 oz MUTE     Yes     Yes Receiver      MODEL     U3R     U3RT CONNECTOR     XLR (male)     XLR (male) DIMENSIONS     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1"     98 x 31 x 29 mm / 3.9" x 1.2" x 1.1" WEIGHT     92 g / 3.2 oz     92 g / 3.2 oz   U3 Microphone Wireless System U3R Dynamic Receiver     High-fidelity plug-and-play wireless receiver for dynamic microphones, for use with a U3 Transmitter     24-bit / 48 kHz digital audio with low distortion and wide frequency response     Stable 2.4 GHz wireless connection with a range of up to 90 feet         Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.