All Loaded Subwoofer Enclosures Boxes (118)

Rockford Fosgate P3S-1X10 Punch Single P3S 10" Shallow Loaded Enclosure The P3S-1X10 is a single 10” Punch Shallow subwoofer rated at 300 Watts RMS loaded in a sealed enclosure. This subwoofer enclosure is internally wired to a 1-Ohm load and features 5/8” MDF and 10 AWG quick-release input terminals. Nothing fits behind your truck seat? Rockford Fosgate has the solution to your problem with the Punch P3S-1X10 shallow 10” loaded enclosure. This loaded enclosure may look small, but it plays loud, and thanks to its 300 Watt RMS power handing and 1-Ohm load wired impedance, you can actually use an amplifier with some balls. Features a sealed slim-line wedge design for optimum mechanical power handling, durable carpet with stitched Diamond-R logo and quick-release input terminals. FEATURES AT A GLANCE Computer optimized design Covered with high density carpet 1 Year Warranty 10 AWG input terminals Wired exclusively with Rockford Fosgate speaker cable 1-Ohm wired impedance Included trim ring ready to accept optional stamped mesh grille insert Constructed with 5/8" MDF Sealed truck box style enclosure SPECIFICATIONS Enclosure Type: Sealed Enclosure Material: 5/8" MDF (Medium Density Fiberboard) Woofer Quantity: 1 Shipping Weight: 22.2 Lbs. (10.06 kg) Dimensions Box (H x W x D): 13.5 x 19.0 x D1 5.3 - D2 3.3 (in) Wedge (H x W x D1 x D2): 34.29 x 48.26 x D1 13.46 - D2 8.38 (cm) Woofer Size: 10" Woofer Series: Punch P3S (P3SD2-10) Nominal Impedance (ea): 1-Ohm Internally wired to create a 1-Ohm amplifier load Power Handling (Watts RMS): 300 Watts RMS 600 Watts Max Speaker Connector: Up to 10 AWG compression terminals Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate R1-1X10 Prime Single 10” 200 Watt Loaded Enclosure The R1-1X10 is a loaded enclosure containing a single 10” subwoofer constructed with durable MDF, high-density carpet, and features quick release terminals to promptly remove or replace the enclosure in your ride. The Prime R1-1X10 is a single 10” sealed enclosure that provides great low bass response at an incredible value. The enclosure is constructed with durable MDF (Medium Density Fiberboard) and covered in resilient high-density carpet. The subwoofer features a Rockford Fosgate’s signature Anodized aluminum voice coil former to deliver superior power handling over the competition. FEATURES AT A GLANCE High current binding posts Constructed with 5/8" MDF 1 Year Warranty Covered with high density carpet SPECIFICATIONS Enclosure Type: Sealed Enclosure Material: 5/8" MDF (Medium Density Fiberboard) Woofer Quantity: 1 Shipping Weight: 21 Lbs. (9.52 Kg.) Dimensions Box (H x W x D): H 12.2" x W 15.94" x D1 7.14" x D2 12.11" Wedge (H x W x D1 x D2): 31cm x 40.5cm x 18.1 cm x 30.8cm Woofer Size: 10" Woofer Series: Prime (R1S4-10) Nominal Impedance (ea): 4-Ohm Internally wired to create a 4-Ohm amplifier load Power Handling (Watts RMS): 200 Watts RMS 400 Watts Max Speaker Connector: Up to 12 AWG compression terminals Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik PUB-8L Powered Enclosure w/ 8″ Subwoofer & RGB LED Lighting General Features: Powder Coated Diecast Aluminum Enclosure RGB LED Lighting Floods the Subwoofer with Light 600w Class D Monoblock Subwoofer Amplifier Variable 50-150Hz 12dB Low Pass Crossover Variable 0-12dB Bass Boost Centered at 45Hz 0-1800 Signal Phase Switch for Dynamic Response High Level Input on Quick Disconnect Harness Optional High Level Signal Sense Auto-Turn On 200m V-6V Stereo Low Level RCA Input 8g Power/Ground Wire Input Terminal Dash-Mount Remote Control Included 9.50”w x 3.375”h x 12.25”L Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. The subwoofer includes a remote bass knob so you can control the bass level from the convenience of your dashboard. The included 4-channel amplifier more than doubles the power over the factory system, allowing you to enjoy your tunes with the top off. EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much space since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. General Features: Complete Direct Fit Audio System Upgrade Compatible with 2018-Up Jeep Wrangler Unlimited JL Compatible with models that don't have a factory-amplified system All installation hardware, such as speaker adapters and amplifier wiring, is included CEA-2006 Compliant System 300 Watt RMS sound system The system consists of: 8" Powered Subwoofer Universal Power Pack Amplifier 2" Component Tweeters Tweeter Adapters Authorized Dealer 1-year Manufacturer's Warranty PWE-S8 Subwoofer Features: Peak: 240 watts RMS: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H KTP-445U Amplifier Features: RMS Power Rating: 4 ohms: 45 watts x 4 Channel 2 ohms: 45 watts x 4 Channel 4 ohms: 90 watts x 2 Channel (Bridged) Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of any head unit without having to install a full-size amplifier and amp install kit The Independent front/Rear gain switch is adjustable from high to low Runs off the receiver's power circuit High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave Fast and simple installation 4-channel operation for four speakers Minimum impedance of 2 ohms Frequency response: 20-20,000 Hz Fuse Rating: 15A x 1 SPR-10TW Component Tweeters: 2" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Vehicle Compatibility: JEEP 2018 - Up Wrangler Unlimited JL Compatible with Wrangler JL Models that don't have a factory amplified system What's in the PSS-23WRA package: KTP-445U amplifier PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket) 7' Signal harness 12' Loomed power wire w/ inline 20A fuse 52-Pin t-harness Four 10" speaker to RCA harnesses Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers Remote bass-level control w/ attached 16' cable 3" Strip of hook-and-loop fastener Ten 6" wire-ties 1/2" Self-tapping screw Star-washer 2 Alpine logos Installation guide Warranty sheet Alpine PSS-23WRA owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.