All Car Amplifiers (436)

Diamond Audio HX1600.1D 1600 Watt RMS Mono Amplifier The Diamond Audio HX1600.1D single channel 1600 watt RMS amplifier is specifically designed for extreme use sound systems that need a small size but major power output. This amp will push any subwoofer you give it, and it'll do it all while staying cool with an anodized extruded aluminum heat sink which provides superior thermal performance. General Features: Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance 4-Layer PCB Board with Balanced Differential Inputs Full Range Class D IR Chipset “SNAP” Capacitors used Throughout the Circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips Provide a Cleaner Board Design Illuminated Logo / Fully Concealed Mounting Output Clip Indicators for Precise Set-Up Fine Tuned Fully Variable Crossovers and Phase Control Top Mounted Controls for Convenient Amplifier Adjustment Specification:RMS Power Rating RMS Power (4Ω): 700 W RMS RMS Power (2Ω): 1150 W RMS RMS Power (1Ω): 1600 W RMS Type Topology: Class D Power Supply Power Supply: Full PWM Power Supply Threshold: 10.0VDC-170VDC Idle Current: (0.7A) Distortion THD 4(1KH@4Ω) : 0.01% S/N Ratio(A weighted@1W): -80dBA S/N Ratio(A weighted@FP): -95dBA Input Sensitivity Low Input Level: 200mV-5.0V High Input Level: N/A Input Impedance Low Input Level: 20 KΩ High Input Level: N/A Output Stage Output Impedance: 0.018 Ω Damping Factor(50Hz@4Ω): >250 Bandwidth(-3dB): 10Hz-300Hz Crossover(-12dB/Oct) Variable High-Pass: N/A Variable Low-Pass: 30Hz-300Hz Variable Sub-Sonic: 10Hz-55Hz@12dB Fuse Ratings ATC: 40A X 4 Dimensions Length x Width x Height(Inches): 15.8" x 7.67" x 2" Length x Width x Height(mm): 402 x 195 x 51.5 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio MICRO1V2 Monoblock 500W RMS Class D Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro1v2, one channel power amplifier, sets the standard for high-end Harley-specific amplifiers. The sound quality in a small footprint can be found in Diamond Audio’s MICROV2 amplifiers. Featuring ultra-efficient entire Range Class D IR Chipset DirectFET Power Mosfet Output Stage SMD Technology on four layer Glass PC Board ICAD circuit provides superior overload protection, these compact amplifiers deliver immense power for their size! The added feature of advanced Rollback/Thermal protection allows you to enjoy continuous and uninterrupted play without shutting down. Installation possibilities are endless! When looking for quality and performance in a small package, look to MICROV2 from Diamond Audio. General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossover Variable 18dB per octave sub-sonic filter Adjustable Bass EQ (45Hz: 0dB to +12dB) / remote level control included Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 300W RMS Power (4Ω): 175W Bridged (mono 1Ω): 500W Bridged (mono 2Ω): 300W Bridged (mono 4Ω): 175W Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.011Ω Damping Factor (50Hz@4Ω): >250 Bandwidth (-3dB): 10Hz - 350Hz Crossover (-12dB/Oct): Variable High-Pass: N/A Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: 10Hz - 55Hz Fuse Ratings: ATC: 25A Dimensions: 7.89” L x 4.0” W x 1.46” H ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Diamond Audio HXM800.1D Monoblock 800 Watts RMS Class D HXM Series Amplifier The Diamond Audio HXM800.1D is a marine-grade motorsport amplifier that boasts 800 watts RMS on a single channel. Perfect for your system that needs to push a subwoofer to the max while using minimal space. General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Circuit board conformal coated (water resistant) for marine applications Full Range Class D amplifier technology Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) Fully variable, 12dB per octave, electronic crossover Variable 18dB per octave sub-sonic filter Phase adjustable from 0 to 180 degrees Adjustable Bass EQ (45Hz: 1dB to +12dB) / remote level control included Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Top-mounted controls for convenient adjustment Integrated soft clip light for quick system set-up Illuminated logo RMS Power Rating RMS Power (1Ω): 800 W X 1 RMS Power (2Ω): 550 W X 1 RMS Power (4Ω): 350 W X 1 Type Topology: MonoBlock Class D Power Supply Power Supply: Full PWM Power Supply Threshold: 10.0VDC-17.0VDC Idle Current: (0.7A) Distortion THD (1KHz@4Ω) : 0.05% S/N Ratio (A weighted@1W): -77.2dBA S/N Ratio (A weighted@FP): -98.9dBA Input Sensitivity Low Input Level: .2mV-10.0V High Input Level: Yes - Up to 25W RMS Input Impedance Low Input Level: 22 KΩ High Input Level: 22 KΩ Output Stage Output Impedance: 0.047Ω Damping Factor (50Hz@4Ω): >250 Bandwidth (-3dB): 10Hz-350Hz Crossover (-12dB per Octave) Variable High-Pass: N/A Variable Low-Pass: 30Hz - 300Hz Variable Sub-Sonic: 10Hz - 55Hz Recommended Fuse Rating ATC: N/A Dimensions Length x Width x Height (Inches): 8.56 x 5.27 x 1.75 Length x Width x Height (mm): 297.6 x 133.9 x 44.5 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier It is introducing the all-new range of Diamond Audio HEX series amplifiers, made for ultimate sound quality and performance. It features a four-layer glass epoxy circuit board, top-mounted controls, and a brushed copper look exterior, making it great for a show car. General Features: Anodized Extruded Aluminum Heat Sink provides superior thermal performance 4-Layer PCB Board with balanced differential inputs Full Range Class D IR Chipset "Snap" capacitors are used throughout the circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips provide a cleaner board design Illuminated logo / fully concealed mounting Output clip indicators for precise setup Fine-tuned fully variable crossovers and phase control Top-mounted controls for convenient amplifier adjustment Monoblock Class-D Amplifier RMS Power Rating: 4 Ohm: 540 watts x 1 Channel RMS Power Rating: 2 Ohm: 870 watts x 1 Channel RMS Power Rating: 1 Ohm: 1200 watts x 1 Channel Frequency Response: 10Hz - 300Hz Variable Low-Pass Filter (12dB/Octave): 30Hz - 300Hz Variable Sub-Sonic Filter (12dB/Octave): 10Hz - 55Hz Top Mounted Controls Anodized Extruded Aluminum Heat Sink 4-Layer PCB Board Balanced Differential Inputs Illuminated Logo Dimensions: 14.2" (362mm) x 7.67" (195mm) x 2" (51.5mm) 1-Year Warranty What is Included? One (1) Diamond Audio HX1200.1D HEX Series Monoblock Class-D Car Audio Amplifier ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO2V2 Micro Series 500W 2-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro2v2 2-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design not only has the juice to power your system but will also save you a ton of space in your car or transport whatever you need it. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossover Variable 18dB per octave sub-sonic filter Adjustable Bass EQ (45Hz: 0dB to +12dB) Wired Remote Level Control included Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 250W X 2 RMS Power (4Ω): 150W X 2 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 500W Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: up to 10.0V Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.011Ω Damping Factor (50Hz@4Ω): >250 Bandwidth (-3dB): 10Hz - 350Hz Crossover (-12dB/Oct): Variable High-Pass:40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Fuse Ratings: ATC: 25A Dimensions: 7.89” L x 4.0” W x 1.46” H ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Diamond Audio HXM800.2D 2-Channel 800 Watts RMS Class D Full-Range HXM Series Amplifier The Diamond Audio HXM800.2D is a marine-grade motorsport amplifier that boasts 800 watts RMS on a single channel. Perfect for your system that needs to push a subwoofer to the max while using minimal space. General Features: Motorsport Series 2-Channel Full-Range Class-D Marine Amplifier Power Output: 300W RMS x 2 @ 4Ω 400W RMS x 2 @ 2Ω 800 W x 1 @ 4Ω bridged Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability Four-layer, glass epoxy circuit board for enhanced performance and reliability Circuit board conformal coated (water resistant) for marine applications Full Range Class D amplifier technology Bridgeable for high power operation Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Selectable auto-turn-on modes: Signal Sensing (VOX),12V Remote (REM), and DC offset (DC) Fully variable, 12 dB per octave, electronic crossover Full range, line-level outputs provided to send a signal to another amplifier Adjustable Bass EQ (MICRO-USB) to connect our optional Bluetooth receiver-controller Top-mounted controls for convenient adjustment Integrated soft clip light for quick system set-up Illuminated logo THD: 0.05% S/N Ratio: < 77.2 dB Low Input Level: 0.2mV - 10.0V Bandwith: 10Hz-35Hz Variable High-Pass: 40-400Hz @ 12dB / Oct Variable Low-Pass: 40-400Hz @ 12dB / Oct Bass Remote Included Dimensions: 9.74"L x 5.27"W x 1.75"H Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio HXM800.4D 4-Channel 800W RMS Class D Full-Range HXM Series Amplifier The Diamond Audio HXM800.4D is a marine-grade motorsport amplifier that boasts 800 watts RMS on a single channel. Perfect for your system that needs to push a subwoofer to the max while using minimal space. General Features: High-Density Aluminum Alloy Heat Sink with Backlit Logo Full Range Class D (IR) Chipset Four Layers PCB Design for Reduced Footprint Size Switchable 12dB HP/FLAT/LP Crossovers Integrated Soft Clip Light for Quick System Set-up BTR Port for Optional Bluetooth Receiver Control Total Power: 800W Power at 4-Ohm: 120W x 4-Ch Power at 2-Ohm: 200W x 4-Ch THD: 0.3% Frequency Response: 10Hz ~ 35kHz (-3dB) Signal-to-Noise Ratio: > -90dB Overall Efficiency: > 80% Input Sensitivity: 0.2 ~ 10.0V Dimensions: 9.35" x 5.27" x 1.75" ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio MICRO5V2 5-Channel 950W RMS Class D Car Motorcycle ATV Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 5-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design not only has the juice to power your system but will also save you a ton of space in your car or transport whatever you need it. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact high-density aluminum alloy chassis provide superior thermal stability. Four-layer, a glass circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2CH/4CH) Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Remote level control for Mono channel (CH5) included Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4/350W x 1 RMS Power (4Ω): 80W x 4/200W x 1 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2/200W x 1 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: Flat or Fixed 70Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: ATC: 60A Dimensions: 10.65” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio HX1200.5 1400W RMS HEX-Series 5-Channel Class-D Car Amplifier Amp For exceptional studio sound quality, the balance of power and control must be mastered in reproducing accurate sound recordings. HEX series amplifiers deliver the most filtered and cleanest signal by removing unwanted static and transient noise that can affect and degrade any car audio system. HEX series amplifiers are manufactured using top-grade audiophile components to deliver unrivaled sound quality amplification. Inspired by the best technologies from professional studio sound equipment, HEX series amplifiers will surely provide the power and control to reproduce that signature Diamond Audio sound! General Features: Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance 4-Layer PCB Board with Balanced Differential Inputs Full-Range Digital Class D IR Chipset “SNAP” Capacitors used Throughout Circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips Provide Cleaner Board Design Illuminated Logo/Fully Concealed Mounting Output Clip Indicators for Precise System Set Up Fine-Tuned Fully Variable Crossover and Phase Control Top Mounted Controls for Convenient Amplifier Specifications: RMS Power Rating: RMS Power (4Ω): 100 W X 4 / 480 X 1 RMS Power (2Ω): 150 W X 4 / 800 x 1 Bridged(mono 4Ω): 480 W X 1(sub output) Bridged(mono 2Ω): 800 W X 1(sub output) Bridged(stereo 4Ω): 300 W X 2(4Ω) / 800 X 1(2Ω) Topology: Full Range Class D Power Supply: Full PWM Power Supply Threshold: 10.0VDC-170VDC Idle Current: (0.7A) THD 4(1KH@4Ω) : 0.06% S/N Ratio(A weighted@1W): -80dBA S/N Ratio(A weighted@FP): .95dBA Low Input Level: 200mV-5.0V Hight Input Level: N/A Input Impedance: Low Input Level: 20 KΩ High Input Level: N/A Output Impedance: 0.0297 Ω Damping Factor(50Hz@4Ω): >250 Bandwidth(-3dB): 10Hz-35KHz Crossover(-12/24dB/Oct) Variable High-Pass: 40Hz-400Hz(-12dB Ch1/2/3/4) Variable Low-Pass: 30Hz-300Hz(-12dB Ch 5) Variable Sub-Sonic: 10-55Hz @ 18 dB Fuse Ratings: ATC: 40A X 2 Dimensions: Length x Width x Height(Inches): 14.25" x 7.67" x 2" Length x Width x Height(mm): 362 x 195 x 51.5 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate Punch P500X1bd Mono subwoofer amplifier 500 watts RMS x 1 at 1 ohm Big power for your sub or subsystem Rockford Fosgate's Punch P500X1bd subwoofer amp can produce up to 500 watts RMS, giving you plenty of clean power for your rhythm track. And the P500X1bd can drive a 1-ohm load, so you can power multiple subs without any trouble. A low-pass filter keeps the high notes away from your sub, while a subsonic filter helps you rein in runaway boom. The Punch bass boost lets you add some of that boom back into the mix when it's needed. Easy to set for optimum performance Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first, download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your power amp. At quiet listening levels, you'll hear less background noise and more of your music. Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything. Maintaining coolness raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better. Product highlights: mono subwoofer amplifier 150 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms) 500 watts RMS x 1 at 1 ohm CEA-2006 compliant Features: variable low-pass filter filter (50-250 Hz, 12 dB/octave) selectable subsonic filter (28Hz, 12 dB/octave) variable PEQ2 bass boost (0-18 dB at 45 Hz) C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones Class-BD amplifier design frequency response: 20-250 Hz Dynamic Thermal Management and MEHSA MOSFET cooling systems MOSFET power and output stages preamp inputs and outputs speaker-level inputs (speaker wire to RCA adapter required) signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead More Info: optional PLC2 wired remote level control with clip light available 4-gauge power and ground leads and an 80-amp fuse recommended — wiring and hardware not included with amplifier no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended 11-1/8"W x 2-7/16"H x 8-13/16"D warranty: 1 year What is in the P500X1bd box: Mono subwoofer amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance P500X1bd owner's manual ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov