All Alpine Car Subwoofers (130)

Alpine S-SB10V-PWR Halo 10" Bass Package Includes S-SB10V linkable 10" ported sub enclosure and KTA-200M compact 200-watt mono amplifier Lively up your bass with this Alpine package Alpine combined two of their most forward-thinking products for this S-SB10V-PWR bass package: the KTA-200M power pack subwoofer amplifier and the S-SBV10 Halo Series 10" loaded ported sub enclosure. You get a propulsive pairing that'll fill your ride with the vibrant thump only solid bass can provide. Kicking compact amp Alpine's KTA-200M power pack subwoofer amplifier sends out up to 200 watts RMS to the sub from a chassis about the size of your hand. The amp uses Alpine's Dynamic Peak Power (DPP) technology to deliver a quick energy boost when needed, virtually doubling the amplifier's output power on musical peaks. PowerStack Installation The KTA-200M includes a PowerStack bracket for mounting the amp in your dash behind Alpine's shallow chassis iLX-W650 digital multimedia receiver. The combined depth of the receiver and amp is still less than 5", so it'll fit in a wide variety of vehicles. The receiver and sub amp together make a feature-filled and powerful sound system that you'll enjoy for many miles. Rugged Halo Series box and 10" sub The S-SB10V comes loaded with Alpine's S-W10D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance. Double the fun This Halo Series sub enclosure sounds great on its own, but when you want to expand your system, you can add a second Halo bass package to create a single two-speaker system with twice the power and double the impact. You can link two S-SB10V boxes using Alpine's KTX-H10 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look. Product highlights: package includes Alpine KTA-200M mono sub amp and S-SB10V ported enclosure with 10" subwoofer KTA-200M 200-watt compact amplifier: 200 watts RMS x 1 at 4 ohms or 2 ohms CTA-2006 compliant Dynamic Peak Power (DPP) technology adds a burst of power when needed selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs PowerStack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver (item #500ILXW650) wiring, hardware, and fuse not included with amplifier 12-gauge power and ground leads and a 20A fuse recommended dimensions: 7-3/4"W (with wiring) x 1-3/8"H x 3-9/16"D warranty: 1 year S-SB10V Halo Series 10" linkable ported subwoofer enclosure: loaded with Alpine's S-W10D4 subwoofer linkable to second S-SB10V enclosure with linking kit (sold separately) Kevlar-reinforced pulp cone with Santoprene rubber surround power handling: 600 watts RMS frequency response: 28-200 Hz 2-ohm impedance dimensions: 16"W x 12-3/4"H x 15"D warranty: 1 year MFR # S-SB10V-PWR What's in the box: Alpine S-SB10V: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on subwoofer) Alpine KTA-200M: Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Four 8" Zip Ties Owner's Manual (English/ French/ Spanish) Warranty information Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-W8D2 900W Max (300W RMS) 8" S-Series Dual 2 Ohm Car Subwoofers ADD BASS TO PRACTICALLY ANY VEHICLE Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D2 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under seats, behind rear bench seats in trucks, or even in some door applications. General Features: 8" 2 Ohm S-Series Subwoofer Power Handling: Peak: 900 watts RMS: 300 watts Recommended power range: 150 - 300 RMS Kevlar Reinforced Pulp Cone HAMR Santoprene Rubber Surround High Strength Steel Frame Basket Concealed Mount Gasket High Strength Steel Frame Basket 10 AWG Push Terminals High Excursion Underhung Voice Coil Configuration High-Grade Strontium Ferrite Magnet Top-mount depth: 3-3/4" Cutout diameter: 6-7/8" Frequency Response: 34 - 200 Hz Sensitivity: 83dB Resonance Frequency (Fs): 48 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 8" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring (installed) Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide (English/ French) Online product registration information (English/ French/ Spanish) Warranty information (English/ French) Important Notice! (English/ French) Alpine S-W8D2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer Alpine introduces the all-new S-Series Subwoofers; their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 4 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts  Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the S-W10D4 package: S-W10D4 owner's manual One 10" Dual 4-ohm voice coil subwoofer Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer Alpine introduces the all-new S-Series Subwoofers; their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporates two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts  Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W10D2 package: S-W10D2 owner's manual One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide Online product registration information Warranty Information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S2-W8D4 900W Max (300W RMS) 8" Type S Series Dual 4 Ohm Car Subwoofer ADD BASS TO PRACTICALLY ANY VEHICLE Don’t you think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under-seats, behind-rear bench seats in trucks, or even for some door applications. General Features: 8" 4 Ohm Type S Series Subwoofer Power Handling: Peak: 900 watts RMS: 300 watts Recommended Power Range: 150 - 300 Watts Kevlar Reinforced Pulp Cone HAMR Santoprene Rubber Surround Progressive Spider with Reinforced Layer Tinsel Leads Compound Radius Curve Extended Pole Geometry Perimeter Vented Frame with Airflow Management System 10 AWG Push Terminals 35mm Underhung Voice Coils Concealed Mount Gasket 34oz Ferrite Magnet Top-mount depth: 3-3/4" Cutout diameter: 6-7/8" Frequency Response: 34-200Hz Authorized Dealer 1-year Manufacturer's Warranty Priced Individually What's in the S2-W8D4 package: Two 8" Dual 4-ohm voice coil subwoofer Alpine S-W8D4 owner's manual 1 Rubber concealing ring Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information  Important Notice!  Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine R2-W12D4 2250W Max (750W RMS) 12" R-Series Dual 4-Ohm Car Subwoofer The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response. General Features: 12" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 127 oz. Strontium ferrite segmented magnet Top-mount depth: 6-3/8" Cutout diameter: 10-7/8" Frequency Response: 24 - 200Hz Sensitivity: 84.3dB Resonance Frequency (Fs): 27Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W12D4 package: R2-W12D2 owner's manual One 12" Dual 4-ohm voice coil subwoofer Two 3" jumper cables R-Series Subwoofer Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine R2-W12D2 2250W Max (750W RMS) 12" R-Series Dual 2-Ohm Car Subwoofer The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response. General Features: 12" Dual 2 ohm Type-R Subwoofer Peak Power Handling: 2250watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 127 oz. Strontium ferrite segmented magnet Top-mount depth: 6-3/8" Cutout diameter: 10-7/8" Frequency Response: 24 - 200Hz Sensitivity: 84.3dB Resonance Frequency (Fs): 27Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W12D2 package: R2-W12D2 owner's manual One 12" Dual 2-ohm voice coil subwoofer Two 3" jumper cables R-Series Subwoofer Application Guide Online product registration information Warranty Information https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PWE-S8-WRA 8" Amplified Custom Fit for 2011-up Jeep Wrangler (4 doors) - Under Seat Plug and Play 120 Watt Amplified Subwoofer DISCREET, WITH A PUNCH The small but powerful PWE-S8-WRA consists of an 8-inch powered subwoofer with a built-in 120 watts amp, a bracket designed to bolt the subwoofer under the Wrangler driver’s seat, a remote bass knob and Wrangler-specific wiring harnesses for plug-and-play connection to your aftermarket or factory in-dash system. The powered subwoofer measures just 13.5” L x 9” W x 3” D, so you can add low, punchy, accurate bass to your Jeep without taking up usable storage space. SOUND CONTROL AT YOUR FINGERTIPS Subwoofer controls like Phase, Gain, LP Crossover, and Remote Sub Level are found on the side panel, or mount the remote bass knob on your dash and use it to make bass level adjustments easily.General Features: 8-inch Compact Powered Subwoofer System Compatible with 2011-Up Jeep Wrangler 4-door vehicles Plug-and-play installation Installs under the driver's seat Works with an Alpine or aftermarket head unit or with the factory Jeep radio Built-in 120 Watt Amplifier Strong and Durable cast aluminum enclosure Dimensions: 13.5"L x 3"D x 9"W Authorized Dealer 1-year Manufacturer's Warranty Note: Not compatible with the factory-equipped subwoofer system What's in the box: Amplified enclosure with one 8" subwoofer installed 80" Wiring harness (Power/ Ground/ Speaker level input) Wrangler radio T-Harness (with in-line fuse holder) Two 15 amp ATO fuses (one installed in the power wire fuse holder/ 1 spare) Remote level control with 15' cable attached (3.5mm mini-plug on end) Adhesive-backed hook and loop mounting fasteners (to mount the remote) 2 Wrangler mounting brackets Eight M4x10mm Machine screws (each with a flat washer and split lock washer) Four M6x10mm Machine screws Fifteen 7" Zip ties Installation instructions Owner's manual (English/ French/ Spanish) Warranty information Online product registration information System installation notice Alpine PWE-S8-WRA owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine PSS-23WRA Powered Sound System Upgrade for 2018 - Up Jeep Wrangler Unlimited Powered System Upgrade for 2018-Up Jeep® Wrangler Unlimited JL TAKE YOUR WRANGLER’S SOUND BEYOND THE FACTORYEnjoy premium sound quality even with your JL’s top-off! The PSS-23WRA is a 300-watt powered system upgrade featuring a powered subwoofer, amplifier, and tweeters for the 2018-Up Jeep Wrangler Unlimited JL without the factory amplified system. The PSS-23WRA provides excellent sound performance whether the JL’s top is on or off.SOUND THAT WILL TURN HEADS WITH THE TOP ON OR OFFThe PWE-S8 subwoofer is engineered to load and disperse lower-frequency sound into the passenger’s footwell area to maximize bass extension throughout the Jeep for great sound with the top on or off. Included with the subwoofer is a remote bass knob so you can control the bass level from the convenience of your dashboard. The Included 4-channel amplifier more than doubles the power over the factory system allowing you to enjoy your tunes with the top off. EASY BOLT-IN INSTALLATIONThe PWE-S8 Powered Subwoofer and KTP-445U Power Pack Amplifier don’t take up much since they mount under the passenger’s seat. The two products come pre-connected for easy bolt-in installation with simple wire routing. Mounting brackets for the products are included as well.SIMPLE TWEETER REPLACEMENTThe SPR-10TW Component Tweeters replace the factory tweeters on the top of the dash. These high-performance tweeters add much-needed high-frequency response that is lacking in the factory Jeep JL systems. An EQ Ring improves the tweeter’s dispersion characteristics and delivers a wide, flat frequency response.WORKS WITH ANY RADIOThe included T-harness gets the necessary audio signal connections from behind the Wrangler’s radio, making installation a breeze. The PSS-23WRA is compatible with Alpine universal head units, the factory Jeep base radio, or other aftermarket radios. General Features: Complete Direct Fit Audio System Upgrade Compatible with 2018 - Up Jeep Wrangler Unlimited JL Compatible with models that don't have a factory-amplified system All installation hardware, such as speaker adapters and amplifier wiring, included CEA-2006 Compliant System 300 Watt RMS sound system The system consists of: 8" Powered Subwoofer Universal Power Pack Amplifier 2" Component Tweeters Tweeter Adapters Authorized Dealer 1-year Manufacturer's Warranty PWE-S8 Subwoofer Features: Peak: 240 watts RMS: 120 watts 8" woofer high-excursion cone built-in Class D amplifier frequency response: 32-150 Hz variable low-pass crossover (80-200 Hz) variable phase control (0-180 degrees) preamp- and speaker-level inputs Dimensions: 13-1/2"W x 3"D x 9"H KTP-445U Amplifier Features: RMS Power Rating: 4 ohms: 45 watts x 4 Channel 2 ohms: 45 watts x 4 Channel 4 ohms: 90 watts x 2 Channel (Bridged) Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of any head unit without having to install a full-size amplifier and amp install kit The Independent front/Rear gain switch is adjustable from high to low Runs off the receiver's power circuit High-Pass Filter: selectable 60/80/120 Hz @ 12 dB/octave Fast and simple installation 4-channel operation for four speakers Minimum impedance of 2 ohms Frequency response: 20-20,000 Hz Fuse Rating: 15A x 1 SPR-10TW Component Tweeters: 2" Type-R Series Car Tweeters Power Handling: Peak: 450 watts per pair / 225 watts each RMS: 150 watts per pair / 75 watts each Silk Dome tweeter construction 4 ohms impedance Copper-Clad Aluminum high-temperature voice coil 75% smaller external crossover filter removes harmful frequencies 4-way tweeter level attenuation High-grade Neodymium magnet structure Surface / Bottom / Flush Mountable CEA-2031 compliant speakers Sensitivity: 88dB Frequency response: 1,000-29,000 Hz Top-mount depth: 11/16" Vehicle Compatibility: JEEP 2018 - Up Wrangler Unlimited JL Compatible with Wrangler JL Models that don't have a factory amplified system What's in the box: KTP-445U amplifier PWE-S8 powered subwoofer (both pre-attached to vehicle mounting bracket) 7' Signal harness 12' Loomed power wire w/ inline 20A fuse 52-Pin t-harness Four 10" speaker to RCA harnesses Two SPR-10TW tweeters w/ integrated mounting plates and 8" wire loom w/ inline crossovers Remote bass-level control w/ attached 16' cable 3" Strip of hook-and-loop fastener Ten 6" wire-ties 1/2" Self-tapping screw Star-washer 2 Alpine logos Installation guide Warranty sheet Alpine PSS-23WRA owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.