All Alpine Car Subwoofers (130)

Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure + KTX-H10 Linking Kit Alpine 2-R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Authorized Dealer 1-year Warranty What is in the box: Ported enclosure loaded with one R-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure + KTX-H10 Linking Kit Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Authorized Dealer 1-year Warranty Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Authorized Dealer 1-year Warranty Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking KitAlpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Authorized Dealer 1-year Warranty Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 package: KTX-H10 Linking Kit owner's manual Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Authorized Dealer 1-year Warranty Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SWT-S10 1200W Max Single 10" Sealed Subwoofer Bass Tube Enclosure Combining the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofers in a thin package optimized for tiny enclosures. The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing enormous output to build the ideal sound system for your truck. At 4-1/8” deep. These subs provide deep bass performance where it usually couldn’t fit in a truck. The vented pole optimized for a 4-1/8” deep box is the ideal enclosure size, meaning excellent bass performance can fit just about anywhere in your truck. General Features: Single 10" Sealed Subwoofer Tube Enclosure 1200 Watts MAX Power Handling 250 Watts RMS Power Handling Final Impedance: 4 ohms Preloaded with a single 10" Subwoofer Sealed enclosure with embroidered black carpet Enclosure Dimensions: 11.25"W x 23.65" D 1-year Manufacturer's Warranty Subwoofer Features: 10" Passive Subwoofer Push SPK Terminal Frequency Response: 35-200 Hz Sensitivity: 90dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included What is in the SWT-S10 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB12V 12" Halo Series Linkable Ported Vented Loaded Subwoofer Enclosure Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure UNIQUE PROLINK™ DESIGN When you’re looking to make a noticeable impact on your sound system, you add a subwoofer that will bring out the low ends of your music. But what if you already have a single subwoofer and still crave more bass? You could throw out your single enclosure and purchase a new dual enclosure or you can build your bass with Alpine's new ProLink™ technology. ProLink™ is unique to Alpine and allows you to link two S-SB12V enclosures together using an optional KTX-H12 Linking Kit (sold separately) to create a dual subwoofer-enclosure. Now you have the flexibility in power and price to use a single subwoofer or add another subwoofer when more bass is desired. STAND OUT IN THE CROWD The Alpine Halo platform has a reputation for accessible, premium technology that modernizes the look and feel of any vehicle. Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo Display, the S-SB12V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic. The S-SB12V will not only provide a premium sound performance but also elevate the interior of the vehicle for a subwoofer enclosure you can be proud to show off. The optional mounting bracket (sold separately) KTX-H12 solution that mounts to the face of the subwoofer and links to a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. This enclosure is tuned to 36 Hz for optimized sub-bass performance. General Features: 12" ported subwoofer enclosure linkable to second S-SB12V enclosure with the linking kit (sold separately) Kevlar-reinforced pulp cone with Santoprene rubber surround Includes S-W12D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 35 Hz Dimensions 17-inch W x 14.625-inch H X 15-inch D Authorized Internet Dealer warranty: 1 year What is in the S-W12D4 package: Ported enclosure loaded with one S-W12D4 subwoofer driver Rubber flange protector ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine R2-SB12V-BNDL Bass Boost Package Includes R2-SB12V 12" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control package includes Alpine R2-SB12V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control Alpine R2-SB12V R-Series 12″ Halo Subwoofer with ProLink™ 2Ω A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design and ProLink™. The new 2nd generation R-Series subwoofers take bass performance to extreme levels, delivering thunderous, ground-pounding bass. With Alpine’s enhanced sound performance, the R-Series subwoofers are highly accurate, creating a perfectly matched sound system to R-Series amplifiers and R-Series speakers – building an overall cohesive theme with its entire full-range Hi-RES Audio certified system. The R2-SB12V is designed for amplifier compatibility with 20hm loads. General Features: Dual 12" Vented / Ported Subwoofer Enclosure Power Handling: Peak: 2250 watts Total RMS: 750 watts Total Preloaded with single 12" Subwoofers Vented / Ported Square/Rectangle enclosure Enclosure Dimensions: 15" TD x BD x 17" W x 14.62" H Groundbreaking Alpine Halo Design ProLink™ ported enclosure design Optimal Sound Performance Includes preloaded R-W12D4 12” R-Series subwoofer CARB-compliant 3/4-inch MDF construction Premium black carpet Silver Alpine embossed side logo badge Brushed aluminum finished metallic front baffle Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: Frequency Response: 24 - 200 Hz Sensitivity: 85 dB Enclosure Features: 12" Square/Rectangle Enclosure Box Finish: Carpet What's in the R2-SB12V package: R2-SB12V Owner's manual Ported enclosure loaded with one R2-W12D4 subwoofer driver Warranty information Product registration information Safety notice Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the S-A60M package: S-A60M owner's manual Mono subwoofer amplifier Four 3/4" Screws 2mm Allen wrench Owner's manual Alpine Verification Certificate Online product registration information Alpine RUX-KNOB.2 Remote Bass Knob for Alpine Amplifiers General Features: Remote Bass Level Control Knob 16-1/2" (5 meters) Connection cable Plugs directly in for quick direct subwoofer control Specifically designed as the controller for use with any of the following PDX Amplifiers: PDX-M12, and PDX-M6 Easily adjust the bass gain of your amp while seated inside Control multiple amps from just one RUX-KNOB controller Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the package: Alpine Remote Bass Level Control module 16.4'  connecting cable  4 Self-tapping screws ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Alpine R2-SB10V-BNDL Bass Boost Package Includes R2-SB10V 10" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control package includes Alpine R2-SB10V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control Alpine R2-SB10V R-Series 10″ Halo Subwoofer with ProLink™ 2Ω A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design and ProLink™. The new 2nd generation R-Series subwoofers take bass performance to extreme levels, delivering thunderous, ground-pounding bass. With Alpine’s enhanced sound performance, the R-Series subwoofers are highly accurate, creating a perfectly matched sound system to R-Series amplifiers and R-Series speakers – building an overall cohesive theme with its entire full-range Hi-RES Audio certified system. The R2-SB10V is designed for amplifier compatibility with 20hm loads. General Features: Dual 10" Vented / Ported Subwoofer Enclosure Power Handling: Peak: 2250 watts Total RMS: 750 watts Total Preloaded with single 10" Subwoofers Vented / Ported Square/Rectangle enclosure Enclosure Dimensions: 14.5" TD x BD x 16" W x 12.68" H Groundbreaking Alpine Halo Design ProLink™ ported enclosure design Optimal Sound Performance Includes preloaded R-W10D4 10” R-Series subwoofer CARB-compliant 3/4-inch MDF construction Premium black carpet Silver Alpine embossed side logo badge Brushed aluminum finished metallic front baffle Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: Frequency Response: 24 - 200 Hz Sensitivity: 85 dB Enclosure Features: 10" Square/Rectangle Enclosure Box Finish: Carpet What's in the R2-SB10V package: R2-SB10V Owner's manual Ported enclosure loaded with one R2-W10D4 subwoofer driver Warranty information Product registration information Safety notice Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the S-A60M package: S-A60M owner's manual Mono subwoofer amplifier Four 3/4" Screws 2mm Allen wrench Owner's manual Alpine Verification Certificate Online product registration information Alpine RUX-KNOB.2 Remote Bass Knob for Alpine Amplifiers General Features: Remote Bass Level Control Knob 16-1/2" (5 meters) Connection cable Plugs directly in for quick direct subwoofer control Specifically designed as the controller for use with any of the following PDX Amplifiers: PDX-M12, and PDX-M6 Easily adjust the bass gain of your amp while seated inside Control multiple amps from just one RUX-KNOB controller Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the package: Alpine Remote Bass Level Control module 16.4'  connecting cable  4 Self-tapping screws ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB10V-BNDL Bass Boost Package Includes S-SB10V 10" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control Everything you need This Alpine Bass Boost bundle gives you everything you need to add some solid bass to your car system. The package includes their S-SB10V subwoofer enclosure, the S-A60M amplifier, and the RUX-KNOB.2 remote level control. The S-SB10V Halo Series enclosure features their S-W10D4 10" subwoofer in a rugged MDF enclosure with black carpet covering, wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you thumping bass at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance. And when you're ready to expand your low end even more, you can add a second S-SB10V and link the enclosures together with their KTX-H10 linking kit (sold separately). Powerful amplification With 600 watts of power in a 8" x 8" x 2.5" package, the S-A60M amplifier is a perfect match for the enclosure. The amp includes Alpine's Enhanced Shutdown Performance technology to lower the output if the amp runs too hot. Instead of shutting down completely, it continues playing your music until it cools enough to return to full power. Its low-pass filter and adjustable bass boost let you dial in your sound. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. If you're using the speaker-level inputs, the amp senses an incoming signal and turns itself on, eliminating the need to run a turn-on wire back to your vehicle's receiver or fuse box. Control your sound The RUX-KNOB.2 remote level controller adjusts the amp's level from its set maximum volume all the way down to virtually "off." Since it adjusts level and not "bass boost," you'll maintain the same bass tone as you turn the volume up and down. A 16-foot connecting cable gives you plenty of length to run from the amp to the front of the vehicle. Product highlights: package includes Alpine S-SB10V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control S-SB10V Halo Series enclosure: S-W10D4 subwoofer ported enclosure power handling: 600 watts RMS frequency response: 28-200 Hz 2-ohm impedance enclosure dimensions: 16"W x 12.75"H x 15"D warranty: 1 year S-A60M mono amplifier: 600 watts RMS x 1 at 2 ohms variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) preamp and speaker-level inputs Remote Sensing automatic turn-on when using speaker-level inputs dimensions: 8.045"W x 2.28"H x 8.06"D warranty: 1 year RUX-KNOB.2 remote level control: adjusts gain from 0 to -12 dB 16' connection cable warranty: 1 year MFR # S-SB10V-BNDL What's in the box: Alpine S-SB10V: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on subwoofer) Alpine S-A60M: Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note On-line product registration information Alpine RUX-KNOB.2: Remote Bass Level Control module 16.4' (5 meter) connecting cable (RJ-14 plugs on both ends) Four 1/2" Screws ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB12V-BNDL Bass Boost Package Includes S-SB12V 12" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control Everything you need This Alpine Bass Boost bundle gives you everything you need to add some solid bass to your car system. The package includes their S-SB12V subwoofer enclosure, the S-A60M amplifier, and the RUX-KNOB.2 remote level control. The S-SB12V Halo Series enclosure features their S-W12D4 12" subwoofer in a rugged MDF enclosure with black carpet covering, wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you thumping bass at power levels up to 600 watts RMS. The ported enclosure is tuned to 35 Hz to maximize performance. And when you're ready to expand your low end even more, you can add a second S-W12D4 and link the enclosures together with their KTX-H12 linking kit (sold separately). Powerful amplification With 600 watts of power in a 8" x 8" x 2.5" package, the S-A60M amplifier is a perfect match for the enclosure. The amp includes Alpine's Enhanced Shutdown Performance technology to lower the output if the amp runs too hot. Instead of shutting down completely, it continues playing your music until it cools enough to return to full power. Its low-pass filter and adjustable bass boost let you dial in your sound. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. If you're using the speaker-level inputs, the amp senses an incoming signal and turns itself on, eliminating the need to run a turn-on wire back to your vehicle's receiver or fuse box. Control your sound The RUX-KNOB.2 remote level controller adjusts the amp's level from its set maximum volume all the way down to virtually "off." Since it adjusts level and not "bass boost," you'll maintain the same bass tone as you turn the volume up and down. A 16-foot connecting cable gives you plenty of length to run from the amp to the front of the vehicle. Product highlights: package includes Alpine S-SB12V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control S-SB12V Halo Series enclosure: S-W12D4 subwoofer ported enclosure power handling: 600 watts RMS frequency response: 26-200 Hz 2-ohm impedance enclosure dimensions: 17"W x 14.75"H x 15.5"D warranty: 1 year S-A60M mono amplifier: 600 watts RMS x 1 at 2 ohms variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) preamp and speaker-level inputs Remote Sensing automatic turn-on when using speaker-level inputs dimensions: 8.045"W x 2.28"H x 8.06"D warranty: 1 year RUX-KNOB.2 remote level control: adjusts gain from 0 to -12 dB 16' connection cable warranty: 1 year MFR # S-SB12V-BNDL What's in the box: Alpine S-SB12V: Ported enclosure loaded with one S-W12D4 subwoofer driver Rubber flange protector (installed on subwoofer) Alpine S-A60M: Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note On-line product registration information Alpine RUX-KNOB.2: Remote Bass Level Control module 16.4' (5 meter) connecting cable (RJ-14 plugs on both ends) Four 1/2" Screws ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov