Active PA DJ Speakers (375)

Mackie SRM210 V-Class SRM V-Class Series, 10-Inch 2000W High-Performance Loudspeaker, Powered-BlackThe loudest, best sounding, and most advanced loudspeakers in their classSRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.Robust 2000W amplifiers with our Advanced Impulse DSP tuning and Intelligent Bass Management deliver a consistent listening experience to your whole audience even at extreme volumes. A built-in digital mixer with a full-color display features Bluetooth streaming and powerful processing plus complete wireless control via the SRM Connect app.TRANSPARENT SYSTEM PROTECTIONMackie SRM | V-Class System ProtectionOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.General Features: Industry-leading 2000W Class-D amplifier Advanced impulse DSP proprietary acoustic tuning Intelligent bass management Custom SYM-X horn High-performance custom transducers Transparent system limiting and protection SRM Mix control built-in channel digital mixer with Bluetooth Complete wireless control via the SRM connect App Versatile configuration options Best performance, sound quality, and reliability in its class Industry-leading 2000W Class-D amplifier with transparent system limiting and protection Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™ High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth® Complete wireless control via the SRM Connect™ app Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control Dual-angle pole mount plus angled design for use as a floor monitor Max SPL: 136dB Frequency response: 40Hz-20Hz Coverage: 60°(H)x40°(V) Weight: 30.9 lb / 14 kg Dimensions: 23 x 12.9 x 15.1 in / 584 x 328 x 384 mm ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie SRM210 V-Class SRM V-Class Series, 10-Inch 2000W High-Performance Loudspeaker, Powered-BlackThe loudest, best sounding, and most advanced loudspeakers in their classSRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.Robust 2000W amplifiers with our Advanced Impulse DSP tuning and Intelligent Bass Management deliver a consistent listening experience to your whole audience even at extreme volumes. A built-in digital mixer with a full-color display features Bluetooth streaming and powerful processing plus complete wireless control via the SRM Connect app.TRANSPARENT SYSTEM PROTECTIONMackie SRM | V-Class System ProtectionOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.General Features: Industry-leading 2000W Class-D amplifier Advanced impulse DSP proprietary acoustic tuning Intelligent bass management Custom SYM-X horn High-performance custom transducers Transparent system limiting and protection SRM Mix control built-in channel digital mixer with Bluetooth Complete wireless control via the SRM connect App Versatile configuration options Best performance, sound quality, and reliability in its class Industry-leading 2000W Class-D amplifier with transparent system limiting and protection Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™ High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth® Complete wireless control via the SRM Connect™ app Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control Dual-angle pole mount plus angled design for use as a floor monitor Max SPL: 136dB Frequency response: 40Hz-20Hz Coverage: 60°(H)x40°(V) Weight: 30.9 lb / 14 kg Dimensions: 23 x 12.9 x 15.1 in / 584 x 328 x 384 mm ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie Thump GO 200 watt 8" Portable Battery-Powered Rechargeable DJ PA Bluetooth Speaker Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Simply pair a Bluetooth® enabled device to your Thump Go speaker and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in ultra-portable design with a removable battery pack so you can sound your best anywhere for up 12 hours on a Single Charge BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and really get your sound dialed in just right or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble 4 application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

2 Mackie Thump GO 200-watt 8" 2-way Battery-powered portable loudspeaker Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple yet powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 2-Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker+Speaker Stand Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Simply pair a Bluetooth® enabled device to your Thump Go speaker and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in ultra-portable design with a removable battery pack so you can sound your best anywhere for up 12 hours on a Single Charge BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and really get your sound dialed in just right or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble 4 application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 MR DJ SS350B Speaker Stand Universal Black Heavy Duty Folding Tripod PRO PA DJ Home On Stage Speaker Stand Mount Holder The adjustable height speaker stand is heavy-duty for any time of use and lightweight. The height adjustment gives you the ability to use the stand at several height points, making it usable at any type of venue. This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It is sturdy steel construction and custom carrying case add to the quality and support this stand gives. General Features: Universal Heavy-Duty Tripod Speaker Light Stands Works with All Speakers with 35mm Compatible Insert Loudspeakers, PA Speakers, Stage/Studio Monitors, etc. Foldable legs for portability and easy storage Lightweight design for easy move and carry Safety Pin for maximum strength and security Constructed by metal construction to ensure long time use Center brace connects tripod legs design for increased stability Solid and stable to support up to 80lbs for each speaker stand Legs with the same length make the base extremely stable and safe Ideal for concerts, parties, speech, film shows, band practice and so on Non-slip feet for traction on surfaces greatly improve the stability Lightweight Steel material Rugged and Durable Heavy-Duty Steel Construction Adjustable Height Range: 37.5-78.75 inches Load Capacity 80lbs Maximum Height 78.75" Heavy Duty and Portable 80lbs weight capacity handles most portable PA speakers Accommodates both 1-3/8" and 1-1/2" speaker sockets Folding size: 4.7"x4.7"x37.5"(LXWXH) The diameter of top pipe: φ35mm The diameter of the main iron pipe: φ38mm The diameter of each foot pipe: φ35mm Base Spread: 0-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.38 inches Tripod base Safe telescoping collar with a safety pin for maximum strength and security Color: Black Material: Iron + PP CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

 2 Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker & MR DJ Speaker Stand Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and really get your sound dialed in just right or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers the Ch.2 level when Ch.1 receives a signal. Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 (2) MR DJ SS350B Speaker Stand Universal Black Heavy Duty Folding Tripod PRO PA DJ Home On Stage Speaker Stand Mount Holder The adjustable height speaker stand is heavy-duty for any time of use and lightweight. The height adjustment allows you to use the stand at several height points, making it usable at any venue. This heavy-duty universal stand can be used as a Speaker or Lighting Stand! Sturdy steel construction and custom carrying case add to this stand's quality and support. General Features: Universal Heavy-Duty Tripod Speaker Light Stands Works with All Speakers with 35mm Compatible Insert Loudspeakers, PA Speakers, Stage/Studio Monitors, etc. Foldable legs for portability and easy storage Lightweight design for easy move and carry Safety Pin for maximum strength and security Constructed by metal construction to ensure long time use The Center brace connects the tripod legs design for increased stability Solid and stable to support up to 80lbs for each speaker stand Legs with the same length make the base extremely stable and safe Ideal for concerts, parties, speeches, film shows, band practice, and so on Non-slip feet for traction on surfaces greatly improve the stability Lightweight Steel material Rugged and Durable Heavy-Duty Steel Construction Adjustable Height Range: 37.5-78.75 inches Load Capacity 80lbs Maximum Height 78.75" Heavy Duty and Portable 80lbs weight capacity handles most portable PA speakers Accommodates both 1-3/8" and 1-1/2" speaker sockets Folding size: 4.7"x4.7"x37.5"(LXWXH) The diameter of top pipe: is φ35mm The diameter of the main iron pipe: is φ38mm The diameter of each foot pipe: φ35mm Base Spread: 0-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.38 inches Tripod base Safe telescoping collar with a safety pin for maximum strength and security Color: Black Material: Iron  Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump12A Powered 12-Inch 1300 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction Delivering proven, chest-thumping low-end in an extremely affordable package; the 1300W Thump12A 12” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump features an all-new amplifier design with Dynamic Bass Response for the chest-thumping low end. Plus, the flexible built-in 2 channel mixer features Vita preamps with Wide-Z technology that handles mic, instrument or line signals with ease. Application-specific speaker modes let you dial in the system at the push of a button. With an all-new professional enclosure and robust system protection, you can walk into your next gig with confidence. General Features: 1,300 watts of high-output power in a portable package Class D amplifier with Dynamic Bass Response yields detailed midrange and abundant bass that are ideal for small venues 12 in. high-output woofer and 1.4 in. titanium dome compression driver Built-in 2-channel mixer features Vita preamps with Wide-Z technology that handle mic, instrument, and line-level signals XLR thru output for wired connection to other Thump speakers Integrated precision crossover and transducer time-alignment deliver outstanding sound quality 4 application-specific speaker modes ensure outstanding sound quality in every situation Robust system protection and thermal limiting keep your system safe Flexible mounting options allow tripod-mounting, pole-mounting, and stage monitor use Compact and lightweight for easy setup and transport Housed in a tough, road-ready enclosure Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Powered: Yes Power Configuration: Bi-amped LF Driver Size:12" woofer HF Driver Size:1.4" HF compression driver LF Driver Power Amp:1000W Class D HF Driver Power Amp:300W Class AB Total Power:1300W Peak Inputs:2 x XLR-1/4" combo Outputs:1 x XLR (mix out) Frequency Range:50Hz-23kHz (-10dB) Crossover Frequency:24 dB/octave @ 2kHz Maximum Peak SPL:126 dB SPL @ 1m Signal Processing:4 x voice modes Enclosure Material: Polypropylene with textured black finish Mounting Options: Pole Mount, Floor Power Source: Standard IEC AC cable Height:24.2" Width:14.1" Depth:14" Weight:29.1 lbs. Manufacturer Part Number:2048070-00 ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie Thump212 Powered 12-Inch 1300 Watt PA DJ Loudspeaker with High-Performance Amplifiers, Built-in Mixers, and Power Factor Correction Thump212 12” 1400W Powered Loudspeaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie Thump 212 1400 watt 12" 2-way powered portable loudspeaker with High-Performance Amplifiers, Built-in Mixers, and Power Factor Correction Thump212 12” 1400W Powered Loudspeaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump212 Powered 12-Inch 1400 Watt PA DJ Loudspeaker with High-Performance Amplifiers, Built-in Mixers, and Power Factor Correction Thump212 12” 1400W Powered Loudspeaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump212 Powered 12-Inch 1400 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction with MR DJ Speaker Stand 6 Feet XLR Cable Thump212 12” 1400W Powered Loudspeaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie Thump212 Powered 12-Inch 1400 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction with MR DJ Speaker Stands & Bag, Wired Mic, 6 Feet XLR Cable Thump212 12” 1400W Powered Loudspeaker The lightweight Thump212 12" 1400W  loudspeaker features proven sound quality in an all-new design with a built-in Feedback Eliminator and Music Ducking mode. Lightweight and Built-like-a-tank™, Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more. Performance For a New Generation Thump212 is ready to take on your most demanding performances. Completely redesigned from the ground up, Thump212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig more accessible than ever. With handy features, Thump212 makes gigs run smoother with feedback elimination and music ducking built right in. And with dual TRS / XLR inputs plus a stereo 1/8” aux input, you can plug in all your gear without odd cables and adapters. General Features: 1400W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 47 Hz – 23kHz Max SPL: 128 dB Flexible I/O 1 features an XLR/TRS input that accepts mic or line signals 2 features an XLR/TRS line input plus stereo 1/8” input The output contains audio from both input channels 12” high-performance woofer 1” compression driver Built-in Feedback Eliminator reduces squeals and out of control rumble  Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives a signal Standard pole mount  Monitor wedge provides an optimal angle for use as a floor monitor Universal Power Supply (100-240VAC) Weight: 29.1 lb / 13.2 kg Dimensions: 24.2 x 14.1 x 14 in / 615 x 358 x 356 mm (HxWxD)  POSITIVE FEEDBACK MUSIC DUCKING  You’ve got loud music playing, but it’s time for another announcement. Sure, you could mess with your levels every time, but who’s got time for that? Press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1. FEEDBACK ELIMINATOR Do you ever get a little too close and personal with the microphone only to hear a loud, ear-destroying squeal? That’s commonly known as feedback. And it’s an unfortunate issue that physics won’t change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws. NO MIXER? NO PROBLEM Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. The built-in 2-channel mixer on the rear panel has two combo input jacks for easy plug-and-play plus a 1/8" stereo line to connect the audio output from a smartphone or media player. Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.