Active PA DJ Speakers (350)

  (2) PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stands+XLR Cable Peavey PVX 12 DSP 830W 12-inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to withstand the routine wear easily comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. Moreover, the PVXp 12 DSP features several molded-in cabinet handles for extra grab-and-go convenience. When it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVX 12 DSP speakers are so lightweight you may be tempted to throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. Additionally, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. The PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP. Thanks to its state-of-the-art design, it's easy to get the most out of your Peavey PVXp 12 DSP. Built-in DSP tailors your sound to just about any situation you will likely encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVX 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts An extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

(2) PVXP15 DSP 15 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stands+XLR Cable Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP15 DSP 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cables Peavey PVXp15-DSP 800W 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 15 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Peavey PVXP15 DSP 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stand Peavey PVXp15-DSP 800W 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 15 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Peavey PVXP15 DSP 15-inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Peavey PVXp15-DSP 800W 15-inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to withstand the routine wear that quickly comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. Moreover, the PVXp 15 DSP features several molded-in cabinets handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight you may just be tempted to throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. Additionally, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  (2) PVXP15 DSP 15 inch Powered Speaker 830W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cables Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

(2) PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cable Peavey PVXp 12 DSP 830W 12-inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features several molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight you may just be tempted to throw them in the back of your truck literally. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. Additionally, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cable Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Peavey PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stand Peavey PVXp 12 DSP 830W 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 12 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 830 watts through a powerful 12" woofer and 1.4" titanium compression driver, the PVXp 12 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 12 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 12 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 12 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 12 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 12 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 12 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 12 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 12 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 12 DSP will do the trick. It packs 830 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 12 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 12 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 12 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 12 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 12 DSP Features: 12" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 10 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 12" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 51Hz-20kHz Frequency Response: 60Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 24.5" Width: 16.1" Depth: 15" Weight: 43 lbs. Manufacturer Part Number: 03616450 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie Thump212 Powered 12-Inch 1400 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction with MR DJ Heavy Duty Aluminum Speaker Stands with 1/4 inch Cables, Carrying Case, & 2 XLR Cables Bundle Delivering proven, chest-thumping low-end in an extremely affordable package, the 1400W Thump212 12” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump features an all-new amplifier design with Dynamic Bass Response for the chest-thumping low end. The flexible built-in 2-channel mixer features Vita preamps with Wide-Z technology that easily handles mic, instrument, or line signals. Application-specific speaker modes let you dial in the system at the push of a button. With an all-new professional enclosure and robust system protection, you can confidently walk into your next gig. General Features: 1,400 watts of high-output power in a portable package Class D amplifier with Dynamic Bass Response yields detailed midrange and abundant bass that are ideal for small venues 12 in. high-output woofer and 1.4 in. titanium dome compression driver The built-in 2-channel mixer features Vita preamps with Wide-Z technology that handle mic, instrument, and line-level signals XLR thru output for wired connection to other Thump speakers Integrated precision crossover and transducer time-alignment deliver outstanding sound quality 4 application-specific speaker modes ensure outstanding sound quality in every situation Robust system protection and thermal limiting keep your system safe Flexible mounting options allow tripod-mounting, pole-mounting, and stage monitor use Compact and lightweight for easy setup and transport Housed in a tough, road-ready enclosure Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Powered: Yes Power Configuration: Bi-amped LF Driver Size:12" woofer HF Driver Size:1.4" HF compression driver LF Driver Power Amp:1000W Class D HF Driver Power Amp:300W Class AB Total Power:1400W Peak Inputs:2 x XLR-1/4" combo Outputs:1 x XLR (mix out) Frequency Range:50Hz-23kHz (-10dB) Crossover Frequency:24 dB/octave @ 2kHz Maximum Peak SPL:126 dB SPL @ 1m Signal Processing:4 x voice modes Enclosure Material: Polypropylene with textured black finish Mounting Options: Pole Mount, Floor Power Source: Standard IEC AC cable Height:24.2" Width:14.1" Depth:14" Weight:29.1 lbs. ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

  2 Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker & Thump Go Carry Bag & MR DJ Speaker Stand  Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Simply pair a Bluetooth® enabled device to your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble Four application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal. Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 (2) MR DJ SS350B Speaker Stand Universal Black Heavy Duty Folding Tripod PRO PA DJ Home On Stage Speaker Stand Mount Holder The adjustable height speaker stand is heavy-duty for any time of use and lightweight. The height adjustment allows you to use the stand at several height points, making it usable at any venue. This heavy-duty universal stand can be used as a Speaker or Lighting Stand! Sturdy steel construction, and custom carrying case add to the quality and support this stand gives. General Features: Universal Heavy-Duty Tripod Speaker Light Stands Works with All Speakers with 35mm Compatible Insert Loudspeakers, PA Speakers, Stage/Studio Monitors, etc. Foldable legs for portability and easy storage Lightweight design for easy moving and carry Safety Pin for maximum strength and security Constructed by metal construction to ensure long time use The Center brace connects the tripod legs design for increased stability Solid and stable to support up to 80lbs for each speaker stand Legs with the same length make the base extremely stable and safe Ideal for concerts, parties, speeches, film shows, band practice, and so on Non-slip feet for traction on surfaces greatly improve the stability Lightweight Steel material Rugged and Durable Heavy-Duty Steel Construction Adjustable Height Range: 37.5-78.75 inches Load Capacity 80lbs Maximum Height 78.75" Heavy Duty and Portable 80lbs weight capacity handles most portable PA speakers Accommodates both 1-3/8" and 1-1/2" speaker sockets Folding size: 4.7"x4.7"x37.5"(LXWXH) The diameter of the top pipe: φ35mm The diameter of the main iron pipe: is φ38mm The diameter of each foot pipe: φ35mm Base Spread: 0-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.38 inches Tripod base Safe telescoping collar with a safety pin for maximum strength and security Color: Black Material: Iron Mackie Thump GO Carry Bag Carry Bag for the Mackie Thump GO 8" Battery-Powered Portable Loudspeaker Nylon Carrying Bag for Your Mackie Thump GO While your Thump GO loudspeaker is durable, Sweetwater recommends extra security in the form of the Thump GO Carry Bag. This rugged nylon bag is perfect for safeguarding your Mackie Thump GO's valuable internal and external components during transport and storage. In other words, this bag is the ideal companion to ensure your Thump GO stays in tip-top shape. Thump GO Carry Bag Features: Compatible with the Mackie Thump GO 8-inch Battery-powered Portable Loudspeaker Made from durable nylon material for maximum protection indoors and out Great to use when transporting or storing your Thump GO ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

  Mackie Thump215XT Boosted 1400W 15" Advanced Powered Loudspeakers with MR DJ Steel Speaker Stand and 12' XLR-XLR Cable Mackie Thump215XT 1400W 15" Powered PA Loudspeaker System with DSP and Bluetooth Enhance your next set with Thump215XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump215XT is the ultimate loudspeaker for DJs, bands, and clubs that need pro sound without the insane price tag. General Features: 1400W ultra-efficient Class-D amplifier. Built-Like-A-Tank to conquer every gig while lightweight for easy loading. Frequency response: 40 Hz - 20kHz. 15" high-performance woofer. 1" compression driver. 4 Application-specific voicing modes. Outdoor mode optimizes voicing for open-air venues. Bluetooth connectivity for streaming, speaker linking, and control. Flexible I/O. Built-in Feedback Eliminator reduces squeals and out-of-control rumble. Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives the signal. Front LED On/Off switch. Universal Power Supply (100-240VAC.) Standard pole mount. M10 fly points for permanent installation. The monitor wedge provides an optimal angle for use as a floor monitor. Powered: Yes Channels:2-channel mixer LF Driver Size:15" high-performance woofer HF Driver Size:1" compression driver Total Power:1400W Inputs:2 x XLR-1/4" combo, 1 x 1/8" TRS Outputs:1 x 1/4" Bluetooth: Yes Wireless: Bluetooth Frequency Response:40Hz-20kHz Maximum Peak SPL:129dB SPL Software: Thump Connect 2 App Mounting Options: Pole Mount, Floor Wedge, M10 fly points Power Source: Standard IEC AC cable Height:27.4" Width:17.3" Depth:14" Weight:32.6 lbs. ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.