Sold out -53% sale
2 Rockford Fosgate P3SD2-10 1200W Shallow Mount Subwoofers 2 Rockford Fosgate P3SD2-10 1200W Shallow Mount Subwoofers
00
DAYS
00
HRS
00
MIN
00
SEC
2 Rockford Fosgate P3SD2-10 1200W Shallow Mount Subwoofers
$379.98 $799.98
2 Rockford Fosgate P3SD2-10 P3SD210 10" 1200W Shallow Mount Car Subwoofers Subs Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD2-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 2 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD2-10 package: Rockford Fosgate P3SD2-10 owner's manual One shallow-mount 10" Dual 2-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
Sold out -50% sale
2 Rockford Fosgate P3SD4-10 1200W Shallow Mount Subwoofers + Sub Enclosure Box 2 Rockford Fosgate P3SD4-10 1200W Shallow Mount Subwoofers + Sub Enclosure Box
00
DAYS
00
HRS
00
MIN
00
SEC
2 Rockford Fosgate P3SD4-10 1200W Shallow Mount Subwoofers + Sub Enclosure Box
$399.99 $799.98
2 Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers Subs + Absolute DSS10 Sub Enclosure Box Rockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
Sold out -37% sale
Rockford Fosgate Punch P3SD4-10 600W 10 Rockford Fosgate Punch P3SD4-10 600W 10
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Punch P3SD4-10 600W 10" Punch Stage 3 Shallow
$189.99 $299.99
Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
Sold out -50% sale
2 Rockford Fosgate Punch P3SD4-10 1200W 10 2 Rockford Fosgate Punch P3SD4-10 1200W 10
00
DAYS
00
HRS
00
MIN
00
SEC
2 Rockford Fosgate Punch P3SD4-10 1200W 10" Punch Stage 3 Shallow
$379.98 $759.90
2 Rockford Fosgate P3SD4-10 P3SD410 10" 1200W Shallow Mount Car Subwoofers SubsRockford's bass pedigreeRockford Fosgate's Punch Stage 3 subwoofers come from a long line of high-performance subs that deliver real-deal bass. Now, shallow-mount Punch Stage 3 subs make it easier to get impressive low-end in smaller or hard-to-fit vehicles.Advanced engineeringThe P3SD4-10 shallow-mount 10" sub hangs with its bigger brethren, thanks to advanced materials and engineering. Rockford uses an anodized aluminum cone and dust cap that makes the woofer light and easier to drive yet rigid enough to maintain its shape when you turn it up loud. The M-Roll Santoprene™ surround also provides excellent excursion for maximum output while being durable enough to last.Powerful bass for a tight spaceA low-profile frame houses the sub, with abundant venting to battle overheating and thermal breakdown. At 3-9/16 inches deep, this sub will fit into places where no bass has gone before — build a custom enclosure or find a suitable box. The dual 4-ohm voice coils allow you to wire up multiple subs or to coax an optimum performance from your amplifier.General Features: 10" Rockford Fosgate Punch Series Shallow-mount Subwoofer Power Handling: Peak: 600 watts  Power Handling: RMS: 300 watts Recommended power range: 100 - 300 watts RMS Impedance: Dual 4 ohm 2.5" Voice Coil with spun-laced Nomex insulating collar Kevlar Fiber Semi-Pressed Paper Cone Compressed Sealed Poly-foam Surround ABS/Acrylic Dustcap Assembly Tear and fatigue-resistant poly-cotton spider Dual 10 AWG compression speaker terminals Top-mount depth: 3.50" Cutout diameter: 9.06" Frequency Response: 40 - 250 Hz Sensitivity: 83 dB Xmax: 8.4 mm Magnet weight: 47 oz Resonance Frequency (Fs): 42 Hz Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P3SD4-10 package: Rockford Fosgate P3SD4-10 owner's manual One shallow-mount 10" Dual 4-ohm voice coil woofer 1 Aluminum trim ring Eight 1-1/8" Allen head self-tapping screws 4mm Allen head bit Installation and Operation Manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
Sold out -34% sale
Rockford Fosgate P3D4-10 Punch P3 10-Inch 500-Watt RMS 1000 Watts Peak Rockford Fosgate P3D4-10 Punch P3 10-Inch 500-Watt RMS 1000 Watts Peak
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate P3D4-10 Punch P3 10-Inch 500-Watt RMS 1000 Watts Peak
$199.99 $299.99
Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
Sold out
Rockford Fosgate P3D4-10 10 Rockford Fosgate P3D4-10 10
Rockford Fosgate P3D4-10 10" 1000 Watt DVC Car Audio Subwoofer + Vented Sub Box
$349.99
Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + Absolute VEGS10 10" Vented Sub Box The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
Sold out -38% sale
Rockford Fosgate P3D4-10 10 Rockford Fosgate P3D4-10 10
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate P3D4-10 10" 1000W 4-Ohm Subwoofer + 10" Mesh Grille Insert
$219.99 $350.00
Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer + 10" Mesh Grille The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
Sold out -34% sale
Rockford Fosgate Punch P3D4-10 10 Rockford Fosgate Punch P3D4-10 10
00
DAYS
00
HRS
00
MIN
00
SEC
Rockford Fosgate Punch P3D4-10 10" 1000 Watt Peak / 500 Watt RMS Dual 4 Ohm Car Subwoofer with Anodized Aluminum Cone
$199.99 $299.99
Rockford Fosgate Punch P3D4-10 P3 Series DVC 4-Ohm 10-Inch 500-Watt RMS 1000 Watts Peak Subwoofer The Rockford Fosgate P3D4-10 is the best-performing Punch series subwoofer. The P3 subwoofers now feature anodized aluminum cones and dust caps along with unique spider venting to keep the motor cooler than previous versions. These subs feature VAST technology to increase surface cone area to 25% and a Flex Fit basket for extreme installations. A new hybrid stamp-cast basket offers the best of both worlds by providing super strength while minimizing weight and resonance. 10" Punch P3 Series Dual 4 Ohm Subwoofer General Feature: 10" Punch P3 Series Dual 4 Ohm Subwoofer Power Handling: Peak: 1,000 watts Power Handling: RMS: 500 watts Impedance: 4 ohm Anodized aluminum heat sinking cone & dust cap for strength and durability Tall profile true Santoprene vertical attach surround technique increases a speaker's effective radiating cone area Dual tear & fatigue resistant linear poly cotton spiders Optimized motor magnetics with extended pole and bumped backplate Fatigue-resistant and reduced-strain stitched tinsel leads Multipoint high temp/strength neck joint bonding technique Sturdy 16-gauge compound bend frame geometry Semi-Flexible PVC removable protective motor cover Custom insulated compression input terminal assembly Proprietary spider venting/cooling technique Decorative die-cast trim ring Custom 10-AWG nickel-plated push terminals High-temperature 4-layer 2-1/2" voice coil with spun-laced Nomex insulating reinforcement collar Double-stacked ferrite magnet structure Frequency response: 28-250 Hz Sensitivity: 82 dB Xmax: 13.9 mm Mounting Depth: 6-1/4" Cutout Diameter: 9-1/8" Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Magnet Weight: 81 oz Frequency Response: 28 - 250 Hz Xmax: 15.9mm Sensitivity: 82 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 1.40ft³ Recommended Sealed Enclosure: 0.59ft³ Matching Amplifiers: (one subwoofer) Rockford Fosgate R750-1D, Parallel @2ohms Rockford Fosgate P1000X1bd, Parallel @2ohms Rockford Fosgate R500X1D, Parallel @2ohms Matching Amplifier: (two subwoofers) Rockford Fosgate P1000X1bd, Parallel @1ohm Rockford Fosgate R1200-1D, Parallel @1ohm Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.
-46% sale
2 Alpine SWT-10S2 Car Subwoofer 1000W 10 2 Alpine SWT-10S2 Car Subwoofer 1000W 10
00
DAYS
00
HRS
00
MIN
00
SEC
2 Alpine SWT-10S2 Car Subwoofer 1000W 10" Single 2-ohm Shallow Mount Subwoofer
$439.90 $799.99
Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
-38% sale
2 Alpine R2-W10D4 Car Subwoofer 2 Alpine R2-W10D4 Car Subwoofer
00
DAYS
00
HRS
00
MIN
00
SEC
2 Alpine R2-W10D4 Car Subwoofer
$626.90 $999.99
2 Alpine R-Series next generation R2-W10D4 10" 4 Ohm 2250 Max, 750W RMS DVC Car Audio Subwoofer The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response. General Features: 10" Dual 4 ohms Type-R Series Series Subwoofer RMS Power Handling: 750 watts Peak Power Handling: 2250 watts Kevlar Reinforced Pulp Paper Cone High-Amplitude Multi-Roll (H.A.M.R) Surround Push-Type Speaker Terminals (Up To 8AWG Wire Size) Oversized Dust Cap 2.6" High-Temperature Voice coil 20 mm Xmax 123 oz. Double Stacked Ferrite magnet motor structure Frequency Response: 26 - 200 Hz Resonance Frequency (Fs): 32 Hz Sensitivity: 82.8 dB Sealed box volume: .4 cubic feet - .85 cubic feet Ported box volume: .75 cubic feet - 1.3 cubic feet Top-mount depth: 6" Cutout diameter: 9.6" CTA-2031 Compliant: Yes Authorized Internet Dealer Alpine KTE-10G Optional Protective subwoofer grille 1-year Manufacturer's Warranty What is in the R2-W10D4 package: R2-W10D4 owner's manual One 10" Dual 4-ohm voice coil subwoofer Plastic trim ring Two 4.5" jumper wires Application guide Online product registration information Warranty Information  Important Notice  ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-21% sale
(2) Alpine W10S4 10 (2) Alpine W10S4 10
00
DAYS
00
HRS
00
MIN
00
SEC
(2) Alpine W10S4 10" 1500 Watt Peak 500 Watt RMS 4-Ohm Car Audio Subwoofers Subs
$199.95 $250.00
2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the  W10S4 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Important Notice! Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
-10% sale
2 Alpine R-SB10V Loaded 10 2 Alpine R-SB10V Loaded 10
00
DAYS
00
HRS
00
MIN
00
SEC
2 Alpine R-SB10V Loaded 10" 750W R-W10D4 Subwoofers + Ported Sub Enclosure Box
$1,089.85 $1,200.00
2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking KitAlpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Authorized Dealer 1-year Warranty Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 package: KTX-H10 Linking Kit owner's manual Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

NATIONWIDE DELIVERY

At Absolute Pro Music, we are glad to ship to most countries! Check our list.

SECURE SHOPPING

We takes credit card information security seriously, we have implemented a variety of technical and procedural controls to ensure transactions on our site remain private and protected.

SHOP WITH CONFIDENCE

Absolute Pro Music wants to make sure that you are completely satisfied. If for some reason you aren't happy with product(s) and want to return it, we make returns simple.

HELP CENTER

You can simply give us a call at +1 800.674.27.24 , and our support staff will answer your call immediately! Explain your issue, what you'd like to change, or what you'd like to add onto your phone system, and get help in real time.
Absolute Pro Music
American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa