alpine (1125)

Alpine SPV-65-SXS 6.5" Powersports Cage Mount Speaker Pods with Alpine KTA-30FW Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods You’ve enjoyed Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now you can get Alpine sound on a variety of power sport and all-terrain vehicles for an uninterrupted music experience that goes beyond the vehicle. The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90-degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on a variety of side-by-side, UTV, and many other All-Terrain vehicles. General Features: Enclosed are 6.5” Coaxial 2-Way Speakers 1” Teteron Dome Tweeter Drivers Rated IP55 Weather-Resistant Enclosures rated IP65 Weather-Resistant Steel Frame ASA 978 B+ Fiberglass Built-In Pro-Style Folding Style Clamp that will fit 1.5"-2" Rails. Rotating Coated Aluminum Base 90-Degree Plug with 20AWG Pigtail 90W RMS 225W Peak Power Handling Nominal Impedance 4? 50-22kHz Frequency Response Santoprene Woofer Material 25mm voice coil Diameter: 6.5 Inches Impedance: 4 Ohm Frequency Response: 50-22000 Hz Peak Power Handling: 225 Watts Color: Black UPC: 793276084606 Weight: 7 Authorized Internet Dealer What is in the box: Alpine SPV-65-SXS owner's manual 2 Speaker pods with integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on other ends) 2 Vinyl logo badges 2 Metal logo badges Instruction manual Warranty information Alpine KTA-30FW 600W Max, 300W RMS KTA Series 4 ohm Stable 4-Channel Class-D Tough Power Pack Amplifier Half The Size, Double The Power Get a huge increase in sound performance over your factory system. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30FW Weather Resistant Tough Power Pack is sure to add higher output and increased dynamic range for those open cab vehicles and toys. The KTA-F30W is perfect for when you want to boost your sound system but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and adds up to 4 times the power over the head unit's original built-in power. The KTA-30FW is ready for your adventures. It is weather-resistant, rated at IP66 for protection against dust ingress and high-pressure water spray. The KTA-30FW features a rugged chassis and high-quality waterproof connector so it can be used in installations where it will be exposed to the elements, like side-by-sides, boats, open-top vehicles. and motorcycles. General Features: Alpine KTA-30FW Class-D Full Range 4-Ohm Stable 4-Channel Amplifier Designed for use in Side-by-Sides, Boats, Open-Top Vehicles, and Motorcycles RMS Power Rating: 4 ohms: 75 watts x 4 Channel RMS Power Rating: 2 ohms: 75 watts x 4 Channel 150 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode) Total power output: 600 watts CEA-2006 Compliant Amplifier Power Wire Harness Included Pulse Width Modulated MOSFET power supply Wired remote bass level control included Soft start turn-on Switchable 4 or 2 channel operation Speaker-level (high-level) inputs Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink IP66 Waterproof Rating Input sensitivity: Low level: 0.2V-4V Input sensitivity: High level: 0.5V-10V Frequency Response: 15 - 36000 Hz Total Harmonic Distortion (THD): <0.1% Signal to Noise Ratio: >98 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Dimensions: 9-3/16"W x 3-3/4"D x 1-3/4"H Authorized Dealer 1-year Manufacturer's Warranty What is in the box: 4-Channel amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Thank you letter Alpine KTA-30FW Tough Power Pack owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods One Pair You’ve enjoyed the Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now you can get Alpine sound on various power sports and all-terrain vehicles for an uninterrupted music experience beyond the vehicle. The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90 degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on various side-by-side, UTV, and other All-Terrain vehicles. General Features: Enclosed are 6.5” Coaxial 2-Way Speakers 1” Teteron Dome Tweeter Drivers Rated IP55 Weather-Resistant Enclosures rated IP65 Weather-Resistant Steel Frame ASA 978 B+ Fiberglass Built-In Pro-Style Folding Style Clamp that will fit 1.5"-2" Rails. Rotating Coated Aluminum Base 90-Degree Plug with 20AWG Pigtail 90W RMS 225W Peak Power Handling Nominal Impedance 4? 50-22kHz Frequency Response Santoprene Woofer Material 25mm voice coil Diameter: 6.5 Inches Impedance: 4 Ohm Frequency Response: 50-22000 Hz Peak Power Handling: 225 Watts Color: Black UPC: 793276084606 Weight: 7 Authorized Internet Dealer What is in the SPV-65-SXS package: SPV-65-SXS owner's manual 2 Speaker pods with integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on other ends) 2 Vinyl logo badges 2 Metal logo badges Instruction manual Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods One Pair You’ve enjoyed the Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now you can get Alpine sound on various power sports and all-terrain vehicles for an uninterrupted music experience beyond the vehicle. The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90 degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on various side-by-side, UTV, and other All-Terrain vehicles. General Features: Enclosed are 6.5” Coaxial 2-Way Speakers 1” Teteron Dome Tweeter Drivers Rated IP55 Weather-Resistant Enclosures rated IP65 Weather-Resistant Steel Frame ASA 978 B+ Fiberglass Built-In Pro-Style Folding Style Clamp that will fit 1.5"-2" Rails. Rotating Coated Aluminum Base 90-Degree Plug with 20AWG Pigtail 90W RMS 225W Peak Power Handling Nominal Impedance 4? 50-22kHz Frequency Response Santoprene Woofer Material 25mm voice coil Diameter: 6.5 Inches Impedance: 4 Ohm Frequency Response: 50-22000 Hz Peak Power Handling: 225 Watts Color: Black UPC: 793276084606 Weight: 7 Authorized Internet Dealer What is in the SPV-65-SXS package: SPV-65-SXS owner's manual 2 Speaker pods with integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on other ends) 2 Vinyl logo badges 2 Metal logo badges Instruction manual Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SS57 5x7" Rear Factory Speaker Replacement Kit For 1999-2002 Ford Expedition Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.