Peavey (213)

Peavey IPR2 3000 3,000 Watt Class D Pro Power Amplifier Amp+ MSP1 Mic System + 2 PV 25' Cables Peavey IPR 2 3000 Lightweight Power Amplifier IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked:  8.16 lb (3.7 kg) Weight Packed:  10.80 lb (4.9 kg) Width Packed:  12.5" (31.75 cm) Height Packed:  21" (53.34 cm) Depth Packed:  4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR2 5000 2-channel Power Amplifier, 5000W, with built-in Crossovers, Speaker Protection, and a lightweight 13.6-lb chassis. + MR DJ USA Bundle 2 Speaker stands, 2 12' Speakon to Speakon cables, and a Carry Bag. Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 5000 2-Channel Lightweight 5000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 5000 2-Channel Lightweight 5000W Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 5000 2-Channel Lightweight 5000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR2 5000 2-channel Power Amplifier, 5000W, with built-in Crossovers, Speaker Protection, and a lightweight 13.6-lb chassis. + MR DJ USA Bundle 2 Speaker stands, 2 12' Speakon to Speakon cables, and a Carry Bag & Mobile Bracket Holder and Electrical Tape Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR27500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stands, 2 12' Speakon to Speakon cables, and a Carry Bag. Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 27500 2-Channel Lightweight 7500 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 7500 2-channel Power Amplifier, 7500W Max, 2022W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 14.5 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 4750 watts 20ms repetitive burst / 3750 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 2800 watts 20ms repetitive burst / 2450 watts 1% THD / 2020 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1550 watts 20ms repetitive burst / 1425 watts 1% THD / 1200 watts 0.15% THD, both channels driven @ 1kHz 2 channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs 4 pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 18.39 lb (8.34 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.