Peavey (213)

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag & Mobile Bracket Holder and Electrical Tape Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 3000 2-Channel Lightweight 3000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 3000 2-Channel Lightweight 3000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 3000 2-Channel Lightweight 3000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag. Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca..

Peavey IPR 2 3000 2-Channel Lightweight 3000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 3000 2-Channel Lightweight 3000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag & Mobile Bracket Holder and Electrical Tape Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

PPeavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR2 3000 3,000 Watt Class D Pro Power Amplifier Amp + 2 MR DJ SS350 Stand & Two 25 Feet Speakon to 1/4" Cables IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dPEAVramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers Built-in Peavey-exclusive DDT circuitry protects your speakers Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls Rated Watts 2ch x 2 ohms 1750 watts 20ms repetitive burst / 1450 watts 1% THD both ch. driven @ 1kHz Rated Watts 2ch x 4 ohms 950 watts 20ms repetitive burst / 900 watts 1% THD / 815 watts 0.2% THD, both ch. driven @ 1kHz Both ch are rated Watts 2ch x 8 ohms 525 watts 20ms repetitive burst / 500 watts 1% THD / 430 watts 0.15% THD. driven @ 1kHz Individual signals pass 1/4" jacks on each channel. Packed Weight: 10.8 lb (4.9 kg) Packed Length: 21" (53.34 cm) Packed Width: 12.5" (31.75 cm) Packed Height: 4.7" (11.94 cm) Groundbreaking IPR Series power amplifier is lightweight, efficient, and reliable. High-speed class D topology delivers high-resolution Variable-speed fan housed inside lightweight aluminum chassis Combi 1/4"/XLR inputs Neutrik speakon outputs Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 3000 Lightweight Power Amplifier IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked:  8.16 lb (3.7 kg) Weight Packed:  10.80 lb (4.9 kg) Width Packed:  12.5" (31.75 cm) Height Packed:  21" (53.34 cm) Depth Packed:  4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.