Peavey (179)

The Peavey PVXp 10 is a Bluetooth Powered Loudspeaker 10-Inch. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet, and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4" inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator that can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. Full-coverage heavy-duty perforated steel grilles, with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals. Product Specifications: Powered: Yes Power Configuration: Bi-amped Channels: 3-channel mixer LF Driver Size: 10" woofer HF Driver Size: 1" Compression Driver LF Driver Power Amp: 400W HF Driver Power Amp: 120W Total Power: 520W (peak) Inputs: 2 x XLR-1/4" combo, 1 x 1/8" TRS Outputs: 1 x XLR Bluetooth: Yes (audio in) Frequency Range: 52Hz-20khz Frequency Response: 65Hz-20 kHz-(±3 dB) Crossover Frequency: 24dB/octave @ 2000 Hz Maximum Peak SPL: 123dB SPL @ 1m Horizontal Coverage Angle: 100° Vertical Coverage Angle: 60° Signal Processing: DSP, 24bit/48kHz Software: PVXp iOS app Enclosure Material: Black injection-molded plastic Mounting Options: Pole, Floor Wedge Power Source: Standard IEC AC cable Height: 20" Width: 12.69" Depth: 11.06" Weight: 27 lbs.

Peavey PVXp 12 12" 2-Way 980 Watt DSP & Bluetooth Active Powered PA Speaker PVXp series loudspeakers combine big power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXp 12 12" 2-Way 980 Watt DSP & Bluetooth Active Powered PA Speaker PVXp series loudspeakers combine big power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

The Peavey PVXp 15 is a Bluetooth Powered Loudspeaker 15-inch. The PVXp 15 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet, and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4-inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ preset, along with other DSP operating parameters, are accessed via a one-knob selector. Top, bottom, and right-side flying point inserts. 15 heavy-duty woofers with 2 3/8" voice coil & 50 oz. magnet. Full-coverage heavy-duty perforated steel grilles, with powder coat finish. DSP I/O is at 48 kHz and 24 bits, internal processing is 56-bit double-precision. Peavey's Quadratic Throat Waveguide technology, 100 by 50-degree coverage. Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads. Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input. Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack. Each channel has a level control and a 3-band EQ section to adjust and shape the input signals. Product Specifications: Powered: Yes Power Configuration: Bi-amped Channels: 3-channel mixer LF Driver Size: 15" woofer HF Driver Size: 1.4" titanium diaphragm LF Driver Power Amp: 840W HF Driver Power Amp: 140W Total Power: 980W (peak) Inputs: 1 x XLR-1/4" combo, 1 x 1/8" TRS Outputs: 1 x XLR Bluetooth: Yes (audio in) Frequency Range: 53Hz-20khz Frequency Response: 59Hz-20kHz (±3dB) Crossover Frequency: 24dB/octave @ 1800Hz Maximum Peak SPL: 127dB SPL @ 1m Horizontal Coverage Angle: 100° Vertical Coverage Angle: 50° Signal Processing: DSP, 24bit/48kHz Software: PVXp iOS app Enclosure Material: Black injection-molded plastic Mounting Options: Pole, Floor Wedge Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.71" Weight: 50 lbs.

Peavey PVXp 12 12" 2-Way 980 Watt DSP & Bluetooth Active Powered PA Speaker PVXp series loudspeakers combine big power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver + 2 Mr. Dj 6 Feet XLR Cable Peavey PVXp 12 12" 2-Way 980 Watt DSP & Bluetooth Active Powered PA Speaker PVXp series loudspeakers combine big power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Peavey PVXP12 DSP 12 inch Powered Speaker 830W 12" Powered Speaker with 1.4" Compression Driver,+ Mr. Dj SS350 Speaker Stand Peavey PVXp 12 12" 2-Way 980 Watt DSP & Bluetooth Active Powered PA Speaker PVXp series loudspeakers combine big power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Peavey PVXP15 DSP 15-inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Peavey PVXp15-DSP 800W 15-inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to withstand the routine wear that quickly comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. Moreover, the PVXp 15 DSP features several molded-in cabinets handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight you may just be tempted to throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. Additionally, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVXP15 DSP 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj Speaker Stand Peavey PVXp15-DSP 800W 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 15 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Peavey PVXP15 DSP 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver,+ Free Mr. Dj XLR Cables Peavey PVXp15-DSP 800W 15 inch Powered Speaker 800W 15" Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, DDT Compression, Asymmetrical Horn, Pole Mount, Plastic Injection-molded Trapezoidal Enclosure, and DSP (each) A Portable Loudspeaker with Onboard DSP The lightweight, road-ready Peavey PVXp 15 DSP loudspeaker provides you with the sound reinforcement you need. Pumping a muscular 800 watts through a powerful 15" woofer and 1.4" titanium compression driver, the PVXp 15 DSP delivers the chest-thumping low end, smooth response, low distortion, and excellent high-frequency dispersion you demand. You can tailor your sound further with this speaker's built-in digital processing. An ultra-rugged injection-molded trapezoidal enclosure and scuff-resistant powder-coated steel grille are the keys to the PVXp 15 DSP's durability, allowing it to easily withstand the routine wear that comes with transporting your speakers. If you're looking for a portable PA speaker with plenty of power and projection, the PVXp 15 DSP is a top performer. Easy-to-transport, lightweight design No one likes hauling around heavy gear. That's why Peavey built the PVXp 15 DSP to be as lightweight as possible without sacrificing durability. What's more, the PVXp 15 DSP features a number of molded-in cabinet handles for extra grab-and-go convenience. And when it comes to flying PVXp 15 DSP speakers, multiple in-cabinet fly points make the job easy. Built tough for life on the road Peavey PVXp 15 DSP speakers are so lightweight, you may just be tempted to literally throw them in the back of your truck. Of course, we at Absolute Pro Music don't recommend this, but if you do, your PVXp 15 DSP will probably shrug off the abuse without a problem. That's because Peavey built their PVXp 15 DSP enclosures from high-tech molded plastic, which absorbs shock and resists scratches like a champ. Plenty of power and projection Whether you're blasting music, amplifying vocals, or just need a good speaker for speech sound reinforcement, your Peavey PVXp 15 DSP will do the trick. It packs 800 watts of power, driving a pair of highly efficient speakers — a pair of PVXp 15 DSPs can easily cover audiences in the hundreds. What's more, built-in pole mounts let you easily elevate your loudspeakers, increasing their effective range. And the PVXp 15 DSP's asymmetrical horn is engineered to deliver your sound where you need it (not over your audience's heads), maximizing its dispersion. Optimize your sound with Advanced DSP It's easy to get the most out of your Peavey PVXp 15 DSP, thanks to its state-of-the-art design. Built-in DSP tailors your sound to just about any situation you're likely to encounter. Tune your speaker's performance for EDM, rock, country, hip-hop, or acoustic music, or optimize it for spoken word presentations. You can also adapt the PVXp 15 DSP to various environments and configurations, such as a typical church setting, with/without a subwoofer, indoors/outdoors, or as a stage monitor. Peavey PVXp 15 DSP Features: 15" heavy-duty woofer delivers chest-thumping low end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles, with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts Extra angled section on right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

The Peavey RACK MNT SING TRAN, Rack Mount for Single In Ear Monitor Transmitter. For use in mounting a single half-rack In Ear Monitor or Assisted Listening wireless transmitter in a standard EIA rack.

The Peavey RAGE 258 is a 25-Watt Guitar Combo Amplifier. The basic building blocks of the TransTube sound are the exclusive designs of the preamp and power amp. The preamp section tailors gain to meet the need for any amount of drive, from crystal clear to thick, smooth sustain. The power amp reacts just like a tube output section by responding to the preamp with natural compression that increases as the amp gets louder. With TransTube, you get a killer amp with widely ranging dynamics and natural "grit," just like a tube amp. Product Specifications: Product Weight: 17.50 lbs Box Dimensions (L x W x H): 15.62 x 10 x 17.87 inches Box Weight: 21.00 lbs