loudspeaker (4)

Peavey PVX™ 10 Passive Loudspeaker Decades of experience building the best sound reinforcement enclosures in the world has led to the next generation of PVX enclosures by Peavey.PVX Loudspeakers are some of the most versatile enclosures on the market. Equally suited for live or pre-programmed music, these enclosures are designed to be used on a speaker stand or flown vertically or horizontally for permanent installation. The new and improved PVX lineup features the addition of foam grille cloth behind the powder-coated steel grille. This new design improves the weather resistance of the loudspeakers. No matter what the application, the PVX series is an outstanding addition to any sound reinforcement solution.PVX series loudspeakers deliver superior sound quality by utilizing advanced materials such as the roadworthy molded polypropylene exterior. Lightweight, durable and weather resistant, these two-way speaker systems will handle more than 400 watts continuous power with 800 watts peak power. They feature heavy-duty woofers with 2-3/8" voice coils. The PVX 10 includes the Peavey RX 10N 1.0" titanium diaphragm compression driver coupled to a constant directivity horn. Our Quadratic Throat Waveguide Technology makes our speakers more efficient at focusing the sound where it needs to be, ensuring louder performance with less likelihood of unwanted feedback. General Features: Two-way sound reinforcement enclosure 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet RX™ 10N compression driver, with 1.0 inch titanium diaphragm 400W program/800W peak power handling Peavey's exclusive Quadratic Throat Waveguide™ technology, 100 by 60 degree coverage Asymmetrical horn aims the sound down 10°, at the audience, not over their heads Crossover network for driver protection and EQ High frequency driver protection Durable plastic injection-molded trapezoidal enclosure Extra angled section on right side allows floor monitor use Full-coverage heavy-duty perforated steel grilles, with powder coat finish and weather resistant foam cloth Pole mount molded-in Top and bottom flying point inserts Packed Weight: 28.22 lb (12.8 kg) Packed Length: 22.4" (56.9 cm) Packed Width: 16.1" (40.89 cm) Packed Height: 14.2" (36.07 cm) Specifications: Shipping Weight  :  12.8 kg Shipping Dimensions :   22.4 × 16.1 × 14.2 in Item Number : 3620370 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVX™p 10 Bluetooth 10-inch Powered Loudspeaker The PVXp 10 Bluetooth features a reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX10 compression driver with a 1 inch titanium diaphragm on a 100 degree horizontal x 60 degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator that can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX™10 compression driver, with 1 inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 520W peak dynamic power DSP control for precise crossover, EQ and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure Extra angled section on right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top and bottom flying point inserts 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles, with powder coat finish DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 60 degree coverage Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 34.18 lb (15.5 kg) Packed Length: 22.441" (57 cm) Packed Width: 15.945" (40.5 cm) Packed Height: 14.37" (36.5 cm) Specifications: Shipping Weight  :  15.5 kg Shipping Dimensions  :  22.441 × 15.945 × 14.37 in Item Number : 3620450 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVX™p 12 Bluetooth 12-inch Powered Loudspeaker The PVXp 12 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with 1.4 inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure Extra angled section on right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles, with powder coat finish DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Specifications: Shipping Weight :   21.3 kg Shipping Dimensions  :  26.75 × 20 × 18.25 in Item Number : 3620470 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey PVX™p 15 Bluetooth 15-inch Powered Loudspeaker The PVXp 15 Bluetooth features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14 compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters, are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with 1.4 inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure Extra angled section on right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom and right side flying point inserts 15" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles, with powder coat finish DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 57.11 lb (25.9 kg) Packed Length: 31.625" (80.33 cm) Packed Width: 21.625" (54.93 cm) Packed Height: 20.375" (51.75 cm) Specifications: Shipping Weight   : 25.9 kg Shipping Dimensions  :  31.625 × 21.625 × 20.375 in Item Number : 3620490 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.