DJ PA Power Amplifiers (31)

MR DJ AMP2800 2800W P.M.P.O, 2-channel 300 watts RMS bridgeable dynamic series PA DJ power amplifier MR DJ has done it again, designing a high-quality power amp for use in the real world, all at an incredible price. The MR DJ AMP2800 power amplifier is designed for years of reliable, flawless operation under rigorous use. MR DJ AMP2800 power amplifier represents a leap in affordable, quality power amplification. The AMP2800 has the power, dependable performance, and ease of use to be used by musicians, DJs, and entertainers, as well as houses of worship, discos, and pubs. General features: 2-channel dynamic series of power amplifier power light switch mode power supply for the highest efficiency and improved audio performance Rated power rating: 8 ohms: 100 watts x 2 ch 4 ohms: 150 watts x 2 ch 8 ohms: 110 watts x 2 ch max 4 ohms: 170 watts x 2 ch max total harmonic distortion (20 ~ 20 Khz) < 0.5% frequency response (20 ~ 20 Khz) under 0.5 dB noise > 98 dB channel isolation (f = 1 kHz) > 82 dB input level > 0 dB input impedance > 10k ohm Max Power Output: 2800 Watts P.P.M.O Heavy Duty Fuse Overload Protection Heavy-Duty Aluminum Alloy Heatsinks with Rack Mountable Design Input Gain Attenuator Four LED Indicators Balanced XLR Connectors flow-thru air path and solid aluminum heat sinks for maximum cooling rack-mountable design / fan-cooled Built-in Subwoofer/Satellite Crossover for Perfect Subwoofer Operation Detente and Illuminated Gain Controls for Precise Level Setting Precise 4-Segment Signal and Limit LEDs To Monitor Performance XLR and 1/4" TRS Combination Input Connectors for Compatibility with any Source Professional Twist-Lock Speaker Connectors for Ultimate Reliability designed and engineered in the USA 1-year manufacturer's warranty product dimensions: 20 x 20 x 7 inches weight: 25 pounds shipping weight: 30 pounds Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag. Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag & Mobile Bracket Holder and Electrical Tape Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 3000 2-Channel Lightweight 3000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR 2 3000 2-Channel Lightweight 3000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Peavey IPR2 3000 2-channel Power Amplifier, 3000W Max, 840W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.9 lbs chassis IPR2™ power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Circuitry Revolutionary IPR class D topology Combi XLR 1/4" inputs Speakon output connectors Light Weight LED illuminated Detented input controls 1750 Watts at 2 ohms 950 Watts at 4 ohms 525 Watts at 8 ohms Individual signals pass 1/4" jacks on each channel. Weight Unpacked: 8.16 lb (3.7 kg) Weight Packed: 10.80 lb (4.9 kg) Width Packed: 12.5" (31.75 cm) Height Packed: 21" (53.34 cm) Depth Packed: 4.7" (11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.