Microphone (163)

Apex APEX176 Condenser Shotgun Microphone This is the ideal microphone for sound reinforcement applications where the microphone needs to have a tight pick-up pattern, but cannot be placed close to the source. Shotgun microphones are most commonly used on sound-stages, for stage plays, for broadcast or for electronic news gathering. This super-cardioid shotgun mic will run on either phantom or battery power. General Features: Extended Hypercardioid Pickup Pattern Excellent Off-Axis Rejection 70Hz Low-Frequency Roll Off Switch Operates with Internal AA Battery or with Phantom Power Remote Recording, Film and Broadcast Applications Included Accessories Deluxe Microphone Clip Foam Windscreen Padded Carry Bag Specifications Element: Black Electret Condenser Frequency Response: 50Hz – 20kHz Sensitivity: -56dB (+/- 3dB, 0dB = 1v/ubar@1kHz) Impedance: 300 Ω S/N: 72dB (1kHz @ 1Pa) MPX SPL: 132dB (1kHz <1% THD) Power Requirement: Internal AA Battery or Phantom Power (9 to 48V) Connection: XLR-M Dimensions: 14.5 x 0.75 in / 368.3 x 19.5 mm Weight: 13.3 oz / 392 g **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX210B Large Element Ribbon Microphone Generally considered to be the ideal microphone for vocals, solo instruments and any broadcast application, the classic ribbon microphone design boasts the most natural sounding audio capture available. The active element of the Apex210B is a very thin corrugated aluminium ribbon mounted under low tension between the poles of a strong magnet. The asymmetrical figure-8 pickup pattern has an extended sweet spot on the rear face of the microphone allowing the recording to accurately reproduce the natural space and ambient reverberation of a good sounding live room with incredibly fast and accurate transient response and stunning realism. The Apex210B ribbon microphone is ideal for todays direct to digital recordings. Although ribbon microphones are by their nature extremely fragile, the Apex210B can handle high sound pressure levels approaching 165dB range. The low-tension 2-inch long, 2-micron thick aluminum ribbon design offers audio reproduction with smooth, natural extended low and high frequency response. The Apex210B comes in an all new black and smoked chrome finish, and is shipped with a custom designed aluminum carrying case. Features Large Element Classic Ribbon Microphone Design Updated Neutral Sounding Low Interference Windscreen Fast Accurate Transient Response Figure-8 Polar Pattern Integrated Yoke Standmount Aluminum Carry Case Included Specifications Type: Large Element Ribbon Ribbon Type: Pure Aluminum (2 Microns x 50mm x 5mm) Frequency Response: 30Hz – 18kHz Sensitivity: -55dB (0dB = 1V/Pa) Impedance: <200 Ω S/N: 70dB MPX SPL: 165dB Connection: XLR-M Dimensions: 7 x 2.7 in / 80 x 68.5 mm Weight: 31 oz / 870 g **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX220 Omnidirectional Test / Reference Microphone The linear frequency response and omnidirectional polar pattern of the Apex220 allows you to carry out measurement and alignment tasks with ease and precision. It is the ideal measurement microphone for use with any real-time analyzer or other audio test equipment. The Apex220’s rugged construction ensures years of reliability. Note: A linear measurement microphone is, by design, meant to have a very flat frequency response and may not yield the best results when used as an audio source microphone for live or recording applications. General Features: Omnidirectional Condenser Microphone Extremely Linear Frequency Response Designed for use with Real Time Analyzers, Test Equipment, Audio Analysis Software Included Accessories Microphone Clip Specifications Type: Test Microphone Element: Back Elecret Condenser Frequency Response: 20Hz – 20kHz Sensitivity: -63dB Impedance: <250 Ω Output Impedance: 15 – 48 VDC S/N: >67dB MPX SPL: 105dB Connection: XLR-M Dimensions: 3.75 x 0.38 in / 14.6 x 10 mm Weight: 3.7 oz / 105 g **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX300 Dynamic Cardioid Microphone The low impedance, dynamic APEX300 is suitable for karaoke, live vocals or any public address (announcement) application. It offers high quality sound reproduction in a rugged yet cost effective microphone package. The Apex300 features an integrated on / off switch and comes with an XLR to 1/4-inch microphone cable for easy connection to virtually any system. General Features: Dynamic Cardioid Pickup Pattern Low Impedance On/Off Switch Included Accessories XLR-1/4-inch Cable Specifications Type: Dynamic Element: Moving Coil Dynamic Capsule: 80Hz – 12kHz Sensitivity: -70dB Impedance: 600 Ω MPX SPL: 130dB Connection: XLR-1/4-inch **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX310 Dynamic Cardioid Microphone The APEX310 is a low impedance dynamic microphone with a cardioid pick-up pattern, ideal for live vocals, karaoke or public address and announcement P.A. The APEX310 features a convenient on / off switch on the microphone barrel and uses rugged all-metal construction and one-piece molded cartridge technology. The APEX310 offers high-quality sound reproduction in a rugged microphone package. It comes with an XLR to XLR mic cable and mic stand clip. The Apex310 is designed to provide the optimum, cost-effective solution to a wide variety of live sound reinforcement, stage and recording applications. It is engineered to deliver smooth accurate response, full bottom end and sparkling highs with sound characteristics identical to those of similar, much higher-priced industry-standard models. General Features: Dynamic Cardioid Pickup Pattern Low Impedance On/Off Switch Included Accessories XLR-XLR Cable Microphone Clip Specifications Type: Dynamic Element: Moving Coil Frequency Response: 80Hz – 12kHz Sensitivity: 80Hz – 12kHz Impedance: 80Hz – 12kHz MPX SPL: 80Hz – 12kHz Connection: 80Hz – 12kHz **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX320 Dual-Impedance Dynamic Cardioid Microphone The dual impedance Apex320 has a very solid feel with an extremely rugged, soldered grille and a durable hi/low impedance switch. This cardioid dynamic microphone is designed for vocals though its versatile design allows it to be used as an instrument microphone as well. The cartridge is of a proprietary one-piece design, which offers exceptional rigidity, stability and reliability. The Apex320 is your best value in a multi-purpose microphone and comes with XLR to XLR mic cable and mic stand clip. General Features: Dynamic Cardioid Pickup Pattern Low Impedance Switchable High or Low Impedances (Hi-Z = Works into basic and vintage PAs) Included Accessories XLR-XLR Cable Microphone Clip Specifications Type: Dynamic Element: Moving Coil Frequency Response: 50Hz – 15kHz Sensitivity: -702dB Impedance: 600 Ω MPX SPL: 130dB Connection: XLR-XLR **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX325 Kick Drum Microphone The Apex325 is ideally suited to handling the high SPL and extended low frequencies that most kick drums can produce. The diaphragm is housed in a solid zinc die cast body for maximum protection. The tight hyper-cardioid pattern also provides improved isolation from other instruments on the stage or bleed from other instruments in and around the kit. Extended low frequency response and a smooth response curve ensure a natural, punchy and clean signal from the bass drum and can easily handle 165dB SPL at the input. General Features: Solid Rugged Zinc Cast Body Handles Extremely High SPL without Distortion or Capsule Overload Ideal Tuned Response for Kick Drums Hypercardioid Polar Pattern for Maximum Off-axis Rejection Gold Plated Pins on XLR Connectors for Improved Signal Transfer Specifications Element: Moving Coil Dynamic Frequency Response: 50Hz – 16kHz Sensitivity: -84dB (± 3 dB) Impedance: 50 Ω MPX SPL: 165dB Connection: XLR-M Dimensions: 4.69 x 4.25 x 2.36 in / 119 x 108 x 60 mm Weight: 16.72 oz / 474 g **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX326 Rim Mounted Dynamic Snare / Tom Microphone The lightweight high impact ABS body and all metal windscreen provide ample protection for the Apex326 dynamic diaphragm. The tight cardioid pickup pattern helps the front-of-house engineer further define the drum mix by separating the toms from crosstalk between mics. The Apex326 comes equipped with a rubber shock-absorbing mounting clip designed not to shift position or to damage a drum’s chrome or brass rim. General Features: High Impact ABS Microphone Body for Reduced Weight on Drum Rim Rugged ABS Drum Rim Clip Handles Extremely High SPL without Distortion or Capsule Overload Cardioid Polar Pattern Reduces Cross Talk Between Adjacent Mics Gold Plated Pins on XLR Connectors for Improved Signal Transfer Specifications Element: Moving Coil Dynamic Frequency Response: 90Hz – 18kHz Sensitivity: -74dB (± 3 dB) Impedance: 600 Ω MPX SPL: 145dB, 1kHz (calculated) Connection: XLR-M Dimensions: 3.43 x 3.31 x 1.3 in / 87 x 84 x 33 mm **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX327 Harmonica / Harp Microphone The Apex327 is the ideal harp mic. The attached 20-foot cable with 1/4-inch strain-relieved jack allows the microphone to direct connect to a high-impedance instrument level input. The high impedance design ensures the Apex327 has enough gain to drive the front end of a tube guitar amp with as much grit as any true blues harp player may need. An easily accessible integrated volume control knob in the body of the microphone that allows the player to make gain adjustments on the fly. The contoured bullet-shaped design fits perfectly in the hands. In addition to its traditional use as a harmonica mic, unique Apex327 can also be used for distinct, lo-fi vocals. General Features: Compact Bullet Shape Microphone Output Volume Control High Impedance Output with Increased Gain Integrated Stand Mount Adaptor Attached 20′ (6m) 1/4-inch Cable with Strain Relief Includes Padded Carry Bag Specifications Element: Dynamic Frequency Response: 100Hz – 5kHz Connection: XLR-M Dimensions: 3 x 3.1 x 2.7 in / 80 x 80 x 68 mm Weight: 23 oz / 660 g **Specifications subject to change without notice

Apex APEX370 Dynamic Headset Microphone The Apex370 is ideal for singers, drummers or anyone who prefers to have their hands free during a performance and not be tied to a traditional mic and mic stand. The lightweight and easily adjusted wire frame is tough enough to withstand continuous, highly active use yet, be comfortable enough to wear for extended periods of time. The Apex370 features a dynamic cardioid microphone specifically optimized for close proximity use and as a dynamic mic does not require phantom power to operate. An attached 15-foot (4.6m) XLR microphone cable direct connects to any traditional PA mixer. General Features: Rugged Secure Headband Assembly Flexible Microphone Gooseneck Handles High SPL Unidirectional Polar Pattern Allows Maximum Gain Before Feedback Velcro Support Headband & Mic Windscreen Included Included Accessories Integrated XLR Cable Foam Windsock Specifications Element: Dynamic Frequency Response: 50Hz – 15kHz Sensitivity: -84dB ± 3dB (0dB = 1v/ubar@1kHz) Impedance: 600 Ω Connection: XLR-M Cable Length: 15ft (4.6m) **Specifications subject to change without notice

Apex APEX375 Dynamic Instrument / Vocal Microphone The Apex375 delivers professional high-quality reproduction for drum, percussion, and instrument amplifier miking applications. The uniform hypercardioid pickup pattern isolates the intended source while reducing background interference even on the loudest stages while the internal capsule shockmount reduces handling noise. Rugged all metal construction ensures the Apex375 will survive the punishment that can occur when close miking high volume sources like guitar amp stacks, or endure the occasional stick hit inevitable to occur when miking snares and toms. General Features: Neodymium Magnet Dynamic Cartridge Cardioid Polar Pattern Reduced Handling Noise Ideal For Live Instrument Applications Gold Plated Pins on XLR Connectors for Improved Signal Transfer Included Accessories Microphone Clip XLR Microphone Cable Specifications Type: Dynamic Element: 40Hz – 15kHz (+/- 3dB) Sensitivity: -58dB (± 3 dB) Impedance: <310 Ω MPX SPL: 144dB Connection: XLR-M **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Apex APEX385 Dynamic Cardioid Microphone The Apex385 is a low impedance, dynamic microphone with exceptionally high sensitivity and linear response. It features a high energy, rare-earth neodymium magnet, double dome diaphragm and an aluminum alloy voice coil designed to provide incredibly high output. Its tight cardioid pattern maximizes gain before feedback for outstanding live performance. An internal double shockmount system significantly reduces handling & extraneous noise while a unique filter minimizes breath noise and popping caused by some consonants. The extremely rugged, heat-treated metal grille is highly shock resistant for better element protection and performance and comes with XLR to XLR mic cable and mic stand clip. New “non-slip” finish makes for more positive grip during enthusiastic live performances. General Features: Neodymium Magnet Dynamic Cartridge Cardioid Polar Pattern Internal Capsule Isolation for Reduced Handling Noise Excellent Off Axis Rejection for Reduced Feedback Potential Non-slip Grip Included Accessories XLR-XLR Cable Microphone Clip Specifications Type: Neodymium Magnet Dynamic Cartridge Element: Moving Coil Dynamic Frequency Response: 50Hz – 18kHz Sensitivity: -74dB Impedance: 300 Ω MPX SPL: 140dB Connection: XLR-XLR **Specifications subject to change without notice Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.