Car Subwoofer (124)

                                  2 Alpine R2-W10D4 2250W Max (750W RMS) 10" R-Series Dual 4-Ohm Car Subwoofer The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. This cone and the Santoprene surround allow the subwoofer to deliver 19mm X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy. MORE RIGID DUST CAP Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the cap's vibration absorption while lowering its density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies. NEW POWER RATING All four R-Series subwoofers are rated at 750W RMS. They perfectly match the PDR-M65 Mono Power Density Amplifier, creating an efficient system. General Features: 10" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250 watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 111 oz. Strontium ferrite segmented magnet Top-mount depth: 5-7/8" Cutout diameter: 9-1/16" Frequency Response: 26 - 200Hz Sensitivity: 82.4dB Resonance Frequency (Fs): 30Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W10D4 package: R2-W10D4 owner's manual 2 10" Dual 4-ohm voice coil subwoofer 1 Rubber concealing ring  Four 3" jumper cables  R-Series Subwoofer Application Guide Online product registration information Warranty Information Important Notice! Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. https://www.alpine-usa.com/product/r-series-subwoofer-r2w10d4 https://www.youtube.com/watch?v=J8g6EZzZQyI&t=131s

                                  2 Alpine R2-W10D4 2250W Max (750W RMS) 10" R-Series Dual 4-Ohm Car Subwoofer The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. This cone and the Santoprene surround allow the subwoofer to deliver 19mm X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy. MORE RIGID DUST CAP Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the cap's vibration absorption while lowering its density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies. NEW POWER RATING All four R-Series subwoofers are rated at 750W RMS. They perfectly match the PDR-M65 Mono Power Density Amplifier, creating an efficient system. General Features: 2 10" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250 watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 111 oz. Strontium ferrite segmented magnet Top-mount depth: 5-7/8" Cutout diameter: 9-1/16" Frequency Response: 26 - 200Hz Sensitivity: 82.4dB Resonance Frequency (Fs): 30Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W10D4 package: R2-W10D4 owner's manual 2 10" Dual 4-ohm voice coil subwoofer 1 Rubber concealing ring  Four 3" jumper cables  R-Series Subwoofer Application Guide Online product registration information Warranty Information Important Notice! Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. https://www.alpine-usa.com/product/r-series-subwoofer-r2w10d4 https://www.youtube.com/watch?v=J8g6EZzZQyI&t=131s

                                  2 Alpine R2-W10D4 2250W Max (750W RMS) 10" R-Series Dual 4-Ohm Car Subwoofer The new R-Series subwoofers take a great platform to the next level. Although the R-Series subwoofers are new for 2017, they come from an impressive Alpine lineage – the Type-R subwoofers. Type-R subwoofers have been known for their power handling, clean output, and deep bass excursion at a mid-line price. Using the highly successful Type-R subwoofers as a foundation, we applied various performance and hardware improvements to the design, fundamentally transforming them into the new R-Series subwoofers – The Next Evolution of Proven Performance. STRONGER CONE ASSEMBLYR-Series subwoofers feature a Kevlar-treated cone for durability. This cone and the Santoprene surround allow the subwoofer to deliver 19mm X-max for incredible, hard-hitting bass. A new method of attaching the spider and cone to the voice coil ensures rigidity throughout the motor structure and increases the subwoofer's accuracy. MORE RIGID DUST CAP Talc, a common mineral used in products such as baby powder and paint, has been found to have incredible damping properties while being less dense than the traditional Mica filler used in dust caps. By adding a calculated amount of talc to the mica polypropylene in the dust cap, we increased the cap's vibration absorption while lowering its density. The lighter dust cap contributes to a faster attack and a more accurate reproduction of low frequencies. NEW POWER RATING All four R-Series subwoofers are rated at 750W RMS. They perfectly match the PDR-M65 Mono Power Density Amplifier, creating an efficient system. General Features: 2 10" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250 watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 111 oz. Strontium ferrite segmented magnet Top-mount depth: 5-7/8" Cutout diameter: 9-1/16" Frequency Response: 26 - 200Hz Sensitivity: 82.4dB Resonance Frequency (Fs): 30Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W10D4 package: R2-W10D4 owner's manual 2 10" Dual 4-ohm voice coil subwoofer 1 Rubber concealing ring  Four 3" jumper cables  R-Series Subwoofer Application Guide Online product registration information Warranty Information Important Notice! Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca. https://www.alpine-usa.com/product/r-series-subwoofer-r2w10d4 https://www.youtube.com/watch?v=J8g6EZzZQyI&t=131s

2 Alpine R2-W12D4 12" 750w RMS Car Subwoofers + AudioControl THE EPICENTER Bass Processor 2 Alpine R2-W12D4 2250W Max (750W RMS) 12" R-Series Dual 4-Ohm Car Subwoofer The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. The new ceramic dust cap is lightweight and rigid, keeping distortion at an absolute minimum. The enlarged motor structure ensures better woofer control for a strong, clean bass response. General Features: 12" Dual 4 ohm Type-R Subwoofer Peak Power Handling: 2250watts RMS Power Handling: 750 watts Recommended power range: 300 - 750W RMS CTA-2031 compliant power ratings Parabolic pulp/kevlar cone H.A.M.R. surround Polypropylene, mica, and talc dust cap Reinforced cone neck and spider joint Cast aluminum frame with integral shorting sleeve 8AWG push terminals with VC configuration jumpers 2.6" High excursion overhung voice coil 127 oz. Strontium ferrite segmented magnet Top-mount depth: 6-3/8" Cutout diameter: 10-7/8" Frequency Response: 24 - 200Hz Sensitivity: 84.3dB Resonance Frequency (Fs): 27Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the R2-W12D4 package: R2-W12D4 owner's manual One 12" Dual 4-ohm voice coil subwoofer Two 3" jumper cables R-Series Subwoofer Application Guide Online product registration information Warranty Information https://www.youtube.com/watch?v=ihjWBSOYVxE&t=179s Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5-Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier + Alpine KTX-H10 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. has introduced a new sound system lineup for the Halo category, which includes a 10-inch enclosure and a remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single-box design while having a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the 10-inch subwoofer is available in a single or “linked” format, with an optional mounting bracket. This innovative design enables the discerning consumer to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall excellent sound quality. The 10-inch enclosure is tuned to 36 Hz, but for optimized performance with Alpine’s S and R-Series subwoofers, it is tuned to 35 Hz.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box? Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier A TOUGH MINI AMP THAT PACKS A PUNCH Get big amp performance in a compact, resilient package. With Alpine’s exclusive Dynamic Peak Power (D.P.P.) technology, the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in open-cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations, such as side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with both aftermarket and factory head units, providing up to 600 DPP watts to your chosen subwoofer. HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather-Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low-Pass Filter: 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to adapt to musical needs automatically Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-30MW box? Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on the other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet KTA-30MW owner's manual Alpine KTX-H10 Linking Kit: Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo. Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box? Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-SB12V 12" Halo Series Linkable Ported Vented Loaded Subwoofer Enclosure  Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure UNIQUE PROLINK™ DESIGNWhen you want to make a noticeable impact in your sound system, add a subwoofer to bring out the low ends of your music. But what if you already have a single subwoofer and still crave more bass? You can discard your single enclosure and opt for a new dual enclosure or construct your bass using Alpine's new ProLink technology. ProLink is unique to Alpine and allows you to link two S-SB12V enclosures together using an optional KTX-H12 Linking Kit (sold separately) to create a dual subwoofer enclosure. Now you have the flexibility in power and price to use a single subwoofer or add another subwoofer when more bass is desired. STAND OUT IN THE CROWD The Alpine Halo platform has a reputation for accessible, premium technology that modernizes the look and feel of any vehicle. Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo Display, the S-SB12V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic. The S-SB12V will provide premium sound performance and elevate the vehicle's interior for a subwoofer enclosure you can proudly show off. The optional mounting bracket (sold separately) KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. This enclosure is tuned to 36 Hz for optimized sub-bass performance. General Features: 12" ported subwoofer enclosure linkable to the second S-SB12V enclosure with the linking kit (sold separately) Kevlar-reinforced pulp cone with Santoprene rubber surround Includes S-W12D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 35 Hz Dimensions 17-inch W x 14.625-inch H X 15-inch D Authorized Internet Dealer warranty: 1 year What is in the box: Ported enclosure loaded with one S-W12D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H12 Linking Kit Linking Kit for Dual 12" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 12" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 12" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 12-inch Front ABS / Steel reinforced port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings Alpine KTX-H12 Linking Kit owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer  with Absolute TW500 Tweeter & Absolute BT1700 Electrical Tape & Mobile Magnet Holder Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch sizes. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporates two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts  Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S-W10D2 package: S-W10D2 owner's manual One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer Alpine introduces the all-new S-Series subwoofers, featuring a unique design that substantially improves bass output and provides installation versatility. Each S-Series subwoofer features a custom-stamped steel frame and is available in three sizes: twelve, ten, and eight inches. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They feature frame leg vents, a vented back plate to aid in cooling the subwoofer's voice coil and motor parts, and a shallow design to accommodate smaller spaces. The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals, featuring a dual voice coil jumper system, will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 4 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts  Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the S-W10D4 package: S-W10D4 owner's manual One 10" Dual 4-ohm voice coil subwoofer Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S2-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer + Absolute KIT8 8 Gauge Amp Kit Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch models. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They feature frame leg vents, a vented back plate to aid in cooling the subwoofer's voice coil and motor parts, and a shallow design to accommodate smaller spaces. The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals, featuring a dual voice coil jumper system, will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system gives any vehicle a clean, finished appearance. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts  Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S2-W10D2 package? S2-W10D2 owner's manual One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide Online product registration information Warranty Information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S2-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch models. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces. The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle. General Features: 10" 2 ohm S-Series (Type-S) Subwoofer RMS Power Handling: 600 watts Peak Power Handling: 1800 watts  Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 4-11/16" Cutout diameter: 8-13/16 Frequency Response: 26- 200Hz Sensitivity: 86.4dB Resonance Frequency (Fs): 33 Hz Authorized Dealer 1-year Manufacturer's Warranty What is in the S2-W10D2 package? S2-W10D2 owner's manual One 10" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables (each has a single banana connector on each end) Subwoofer Application Guide Online product registration information Warranty Information Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S2-W12D2 1800W Max (600W RMS) 12" Type-S Series Dual 2 ohm Car Subwoofer + KTE-12G.3 Grilles VERSATILE APPLICATIONS Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. General Features: 12" 2 Ohm Type-S Series Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 5-1/16" Cutout diameter: 10-9" Frequency Response: 26- 200Hz Sensitivity: 86.2dB Resonance Frequency (Fs): 31 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the S2-W12D2 package: Two 12" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information Important Notice! Alpine S2-W12D2 owners manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S2-W12D2 1800W Max (600W RMS) 12" Type-S Series Dual 2 ohm Car Subwoofer VERSATILE APPLICATIONS Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications. General Features: 12" 2 Ohm Type-S Series Subwoofer Power Handling: Peak: 1800 watts RMS: 600 watts Recommended power range: 250- 600W RMS Pulp/Kevlar Cone High Amplitude Multi-Roll (HAMR) Surround Progressive Spider with Reinforced Layer Tinsel Leads Airflow Optimized Dual Flare Pole Vent High Strength Steel Frame Basket 8 AWG Push Terminals with VC Configuration Jumpers Dual Voice Coil High-Grade Strontium Ferrite Magnets Top-mount depth: 5-1/16" Cutout diameter: 10-9" Frequency Response: 26- 200Hz Sensitivity: 86.2dB Resonance Frequency (Fs): 31 Hz Authorized Dealer 1-year Manufacturer's Warranty What's in the S2-W12D2 package: Two 12" Dual 2-ohm voice coil subwoofer 1 Rubber concealing ring Two 3" jumper cables Subwoofer Application Guide Online product registration information Warranty information Important Notice! Alpine S2-W12D2 owners manual