speakers (135)

The Yorkville Sound SA102 full-range powered cabinet is a smaller, lighter and more portable addition to the Synergy Array Series. Providing a reduced footprint without sacrificing sonic integrity, the SA102 is ideal for medium to large venues, outdoor festivals and inclined seating theatres. The SA102 paired with the SA115S subwoofer creates the ultimate point source system built to power stages of all sizes, easy to lift and configure, and grow with you. Product Specification:   System Type: Active Full-Range Powered Speaker Active or Passive: Active Power Rating (Watts): 1200 Watts Program (2400 Watts Peak) Biampable: Biamp Measured Max SPL (C-Weighted, Max Hold): 127 dB Cont. 133 dB Peak Frequency Response (Hz +/- 3dB): 60Hz-18k Dispersion (°H x °V): 30x45 Asymmetrical (7 Up, 38 Down) Crossover Frequency (Hz): 750Hz Cabinet Configuration: Patented Synergy Horn and Paraline Lens Technology Driver Configuration: 1x10" LF Woofer, 1xHF Compression Driver HF Driver(s): 4" Diaphragm/Voice Coil, Neo HF Power Rating (Watts): 120 watts Program, 240 watts Peak HF Impedance (Ohms): 8 ohm Load HF Protection: Peak and Average Limiting LF Driver(s): 1x10" Neo Woofer with 3" Voice Coil LF Impedance (Ohms): 2 ohm Load LF Protection: Excursion, RMS HF Power Amplifier (Watts): 300 watts Program, 500 watts Peak HF Amplifier Type: 3-Tier Class H LF Power Amplifier (Watts): 900 watts Program, 1600 watts Peak LF Amplifier Type: Class D Cooling Scheme: Convection Power Cable: Removable Locking Powercon True Input and Loop Thru Output Power Switch: Yes Power Consumption: 200VA Inputs: 1 XLR, 2 x XLR Loop Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.56 at max Level Controls: Volume EQ Controls: HF Boost select, Fullrange/Sub switch LED Indicators: Power, Limit, Clip Enclosure Materials: Multiply 15mm Birch Plywood Standard Rigging Hardware: 1/4-20 Eyebolts (4 Top, 4 Bottom) Stacking Feature: Interlocking UHMW Feet (Top and Bottom) Covering / Finish: Paint Dimensions (DWH xbackW, inches): 21.250 x 17.375 x 22.750 x 6.750 Dimensions (DWH xbackW, cm): 54 x 45 x 58 x 17 Weight (lbs/kg): 69/31.3

The Yorkville Sound SA115S powered subwoofer is the companion piece to the SA102 full range speaker. Together, these components create a smaller, lighter and more portable Synergy Array system, without sacrificing the impressive bass Synergy is known for. The Tom Danley patented 15" tapped-horn design allows for the SA115S to deliver an astonishing 9000 watts (peak), and 4500 watts (program) in a compact cabinet.   Product Specification:   System Type: Active Subwoofer Active or Passive: Active Power Rating (Watts): 4500 Watts Program (9000 Watts Peak) Measured Max SPL (C-Weighted, Max Hold): 129dB Cont. 135 dB Peak Frequency Response (Hz +/- 3dB): 31Hz-100Hz Crossover Frequency (Hz): 100 Hz lowpass Cabinet Configuration: Tapped Horn Driver Configuration: 1x15" LF woofer LF Driver(s): 15" Neodymium with 4.5" Voice Coil LF Power Rating(Watts): 4500 Watts Program (9000 Watts Peak) LF Impedance (Ohms): 4 ohm Load LF Protection: Excursion, Voice Coil Thermal (RMS) LF Amplifier Type: Class D Cooling Scheme: Convection Power Cable: Removable Locking Powercon True Input and Loop Thru Output Power Switch: Yes Inputs: 1 XLR with 2x XLR Parallel out, Impedance 35k ohms Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.56 at max Level Controls: Volume, -∞,0dB,8dB (Min, Top, Max) EQ Controls: Thermal Limiter Advance for power consumption management Limiter: Excursion, Thermal (RMS), Clipping LED Indicators: Power, Excursion Limit, Thermal (RMS) Limit, Input Clip, Activity Enclosure Materials: Multiply 15mm Birch Plywood Stacking Feature: Interlocking Rubber Feet (Sides) Covering / Finish: Paint Dimensions (DWH xbackW, inches): 36.625 (including Casters) x 17.750 x 35.250 Dimensions (DWH xbackW, cm): 93 x 45 x 82 Weight (lbs/kg): 165/74.9

The Yorkville Sound SA153 is a professional powered portable PA speaker from the Synergy Array Series system and is designed to be used as the main full-range top and used in conjunction with the SA315S and SA221S powered subwoofers to create a scalable point-source sound system well suited for professional sound reinforcement companies, rental houses, touring bands, musicians, festivals, concerts, mobile DJs, and other sound providers. The heart of the SA153 full range speaker incorporates Tom Danley's Paraline Lens and Synergy Horn technologies, which provides remarkably high output and pristine clarity. The SA153's Paraline lens is loaded with a coaxial compression driver along with a 15" woofer mounted on a 22.5°H x 45°V constant directivity horn. By channeling the sound waves along equidistant paths, the Paraline lens converts the point source compression driver into a line source with constant phase and amplitude. The result is a completely balanced sound field and coverage pattern across the cabinet's horizontal and vertical planes. The unusual design of the SA153 allows the cabinets to be placed side by side without interference. Cabinets can be placed together to cover as wide a pattern as desired, including 360 degrees, without any lobing or interference patterns. The technologically advanced system provides flexibility and power without being overly complex. The rear panel features a simplified set of controls for integrating the speaker into any environment. There are indicator LEDs for clip, limit, and activity. The Level control knob attenuates or boosts the speaker's output, while a dedicated HF Adjust selector helps keep the frequency response flat when using an array of multiple cabinets. A Mode Switch (Sub/No Sub) allows the speaker to be used without a sub (No Sub) with a high-pass of 40 Hz, while the Sub selection utilizes a 100 Hz HP filter. The SA153 has a single XLR input with two parallel XLR outputs for connecting additional SA135 full range and SA315S or SA221S subwoofers. Up to 20 subwoofers/tops can be daisy-chained without signal loss (with balanced cables). The rugged enclosure is made from 15mm Birch plywood with a tough speaker paint coating. The speaker features a rail and lockbar rigging system, which makes flying the system a safe and simple affair. The lockbar also attaches to the cabinet dolly for safe and easy transport. Interlocking UHMW feet and cups are also on the top and bottom to ensure stability when stacking. A power cable is included. Paraline Lens Technology The unique geometry of the patented Paraline Lens is capable of producing a precisely shaped wavefront that matches the horn's physical coverage pattern. It does this while providing a continuous horn throat from cabinet to cabinet on the horizontal plane. This virtually eliminates the comb filtering usually associated with traditionally arrayed cabinets. The Paraline Lens is fed by a high-output, mid-high driver which results in seamless coupling and a matching coverage pattern. Synergy Horn Technology The Synergy Horn configuration of the Paraline Lens coupled with a single 15" high-output woofer seamlessly couples the output from both drivers while performing as a true point source. The horn utilizes the entire front area of the cabinet maximizing efficiency and directivity control. Product Specification:   Active or Passive: Active Power Rating (Watts): 2600 Watts Program (5000 Watts Peak) Biampable: Triamp Measured Max SPL (C-Weighted, Max Hold): 131 dB Cont. 137 dB Peak Frequency Response (Hz +/- 3dB): 55Hz-18k Dispersion (°H x °V): 22.5x45 Asymetrical 10 Up, 35 Down Crossover Frequency (Hz): 400Hz, 7kHz Cabinet Configuration: Patented Synergy Horn and Paraline Lens Technology Driver Configuration: 1x15" LF woofer, 1x MF/HF Co-ax Compression HF Driver(s): 1.75" Diaphragm/Voice Coil Annular Co-axial HF Power Rating (Watts): 300 Watts HF Impedance (Ohms): 16 ohm Load HF Protection: Peak and Average Limiting MF Driver(s): 3.5" Diaphragm/Voice Coil Annular Co-axial MF Power Rating (Watts): 300 Watts MF Impedance (Ohms): 16 ohm Load MF Protection: Peak and Average Limiting LF Driver(s): 1x15" Neo Woofer with 3.5" Voice Coil LF Power Rating(Watts): 2000 watts Program (4000 watts Peak) LF Impedance (Ohms): 8 ohm Load LF Protection: Excursion, RMS HF Power Amplifier (Watts): 300W HF Amplifier Type: 3-Tier Class H MF Power Amplifier (Watts): 300W MF Amplifier Type: 3-Tier Cllass H LF Power Amplifier (Watts): 2000W LF Amplifier Type: Class D Cooling Scheme: Convection Power Cable: Removable Locking Powercon True Input and Loop Thru Output Power Switch: Yes Power Consumption (typ/max): 220 VA / 400 VA Inputs: 1 XLR, 2 x XLR Loop Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.56 at max Level Controls: Volume EQ Controls: HF/MF Boost select, Fullrange/Sub switch LED Indicators: Power, Limit, Clip Enclosure Materials: Multiply 15mm Birch Plywood Standard Rigging Hardware: RAIL and LOCKBAR Rigging System (Top and Bottom) Stacking Feature: Interlocking UHMW Feet (Top and Bottom) Covering / Finish: Paint Dimensions (DWH xbackW, inches): 24 x 21 x 26.5 x 12.25 Dimensions (DWH xbackW, cm): 60.9 x 53.3 x 67.3 x 31.1 Weight (lbs/kg): 115/52.1 Optional Synergy Series Accessories Pick Up Bar (SAPICKUPBAR1): Single column cabinet hanging hardware (2xSA153 Plus 1xSA315S MAX) Flying Bumper (SABUMPER1): 4 wide flying bumper (8xSA153 Plus 4xSA315S MAX) SA153 Cabinet Cover (SA153COVER): Will cover 2 Cabinets (stacked) SA315S Cabinet Cover (SA315SCOVER): Will cover 1 Cabinet Cabinet Dolly (SADOLLY1): Holds 2 x SA153 stacked or 1 x SA315S

The Yorkville Sound SA218S, Synergy Dual 18-Inch Powered Subwoofer is designed for the most discerning ear for bass, the SA218S can be combined directly with an SA153 or SA102 as an independent system or in combination with the SA153 and SA315S setup as a 5-way system. Powered by a standard 15-amp wall socket, the SA218S boasts 12,000 watts, the maximum output with this amount of power. The SA218S is voiced for all live and DJ music and excels where high output and deep bass extension is a must. In step with all Synergy products, the SA218S is no-compromise subwoofer, using the best 18" woofers available, the best driver-specific amplification, and optimized DSP settings. Product Specification: System Type: Active Subwoofer Active or Passive: Active Power Rating (Watts): 6000 Watts Program (12000 Watts Peak) Measured Max SPL (C-Weighted, Max Hold): 130dB Cont. 142 dB Peak Frequency Response (Hz +/- 3dB): 30Hz-100Hz Crossover Frequency (Hz): 100 Hz lowpass Cabinet Configuration: Bass Reflex Driver Configuration: 2x18" LF woofer LF Driver(s): 18-inch Neodymium with 4.5-inch Voice Coil X2 LF Impedance (Ohms): 8-ohm Load x 2 LF Protection: Excursion, Voice Coil Thermal (RMS) LF Amplifier Type: Class D Cooling Scheme: Convection Power Cable: Removable Locking Powercon True Input and Loop Thru Output Power Switch: Yes Inputs: 1 XLR with 2x XLR Parallel out, Impedance 35k ohms Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.56 at max Level Controls: Volume, -∞,0dB,10dB (Min, Top, Max) EQ Controls: Thermal Limiter Advance for power consumption management Limiter: Excursion, Thermal (RMS), Clipping LED Indicators: Power, Excursion Limit, Thermal (RMS) Limit, Input Clip, Activity Enclosure Materials: Multiply 15mm Birch Plywood Stacking Feature: Interlocking Rubber Feet (Sides) Covering / Finish: Paint Dimensions (DWH xbackW, inches): 28.872 (including Casters) x 44 x 22 Weight (lbs/kg): 248/112.49

The Yorkville Sound SA221S is a professional, powered portable PA subwoofer from the Synergy Array Series system and is designed to be used as a dedicated subwoofer for the SA153 full-range top or used in conjunction with the SA153 full-range speaker and the SA315S powered subwoofer to create a scalable point-source sound system well suited for professional sound reinforcement companies, rental houses, touring bands, musicians, festivals, concerts, mobile DJs, and other sound providers.   Product Specification:   Active or Passive: Active Power Rating (Watts): 6000 Watts Program, 17000 Watts Peak Measured Max SPL (C-Weighted, Max Hold): 130.6 dB Cont. 142.6 dB Peak Frequency Response (Hz +/- 3dB): 28 - 100Hz Crossover Frequency (Hz): 50 or 100 Hz lo Cabinet Configuration: Bass Reflex Driver Configuration: 2x21-inch LF woofer LF Driver(s): 21-inch Neo with 4.5-inch Tetra Coil LF Power Rating(Watts): 6000 Watts Program, 17000 Watts Peak LF Impedance (Ohms): 2 amplifiers, 4 ohms per amplifier LF Protection: Excursion, Voice Coil Thermal (RMS) LF Power Amplifier (Watts): 6000 Watts Program, 17000 Watts Peak LF Amplifier Type: Class D Cooling Scheme: Convection Power Cable: Removable Locking Powercon True Input and Loop Thru Output Power Switch: Yes Power Consumption (typ/max): 1440 VA / 1920 VA Inputs: 1 XLR with 2x XLR Parallel out, Impedance 35k ohms Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.56 at max Level Controls: Volume, -?,0dB,8dB (Min, Top, Max) EQ Controls: Thermal Limiter Advance for power consumption management Limiter: Excursion, Thermal (RMS), Clipping LED Indicators: Power, Excursion Limit, Thermal (RMS) Limit, Input Clip, Activity Enclosure Materials: Multi-ply 15mm Birch Plywood Stacking Feature: Rubber Feet and Cups (Side and Bottom) Covering / Finish: Paint Dimensions (DWH xbackW, inches): 32.750 (37.750 including casters) x 29.750 x 47.5 Dimensions (DWH xbackW, cm): 83.2 (95.8 including casters) x 75.5 x 120.6 Weight (lbs/kg): 370/168

The Yorkville Sound SA315S Synergy Array Series is a truly revolutionary active point source system with unmatched flexibility, power, and directivity control. The Synergy System offers users unrivaled simplicity without sacrificing sonic performance. The Synergy Array Series consists of the SA153 full-range powered cabinet, along with the SA315S powered subwoofer. This dynamic duo makes the ultimate point source speaker system scale-able for club gigs of all sizes, outdoor festivals, inclined seating venues, and arenas. Never before has a large point source system with this much output and sound quality been this easy to set up and use.   Product Specification:   Active or Passive: Active Power Rating (Watts): 6500 Watts Program (13000 Watts Peak) Measured Max SPL (C-Weighted, Max Hold): 130 dB Cont. 136 dB Peak Frequency Response (Hz +/- 3dB): 31Hz-100Hz Crossover Frequency (Hz): 100 Hz lowpass Cabinet Configuration: Bass Reflex Driver Configuration: 3x15" LF woofer LF Driver(s): 15" Ceramic with 3" Voice Coil LF Power Rating(Watts): 6500 Watts Program (13000 Watts Peak) LF Impedance (Ohms): 2.7 ohm Load (3x 8 ohm) LF Protection: Excursion, Voice Coil Thermal (RMS) LF Power Amplifier (Watts): 6500 Watts Program (13000 Watts Peak) LF Amplifier Type: Class D Cooling Scheme: Convection Power Cable: Removable Locking Powercon True Input and Loop Thru Output Power Switch: Yes Power Consumption (typ/max): 600 VA / 1200 VA Inputs: 1 XLR with 2x XLR Parallel out, Impedance 35k ohms Input Sensitivity (Vrms Sine): Line in 1.4 at center, 0.56 at max Level Controls: Volume, -∞,0dB,8dB (Min, Top, Max) EQ Controls: Thermal Limiter Advance for power consumption management Limiter: Excursion, Thermal (RMS), Clipping LED Indicators: Power, Excursion Limit, Thermal (RMS) Limit, Input Clip, Activity Enclosure Materials: Multiply 15mm Birch Plywood Standard Rigging Hardware: RAIL and LOCKBAR Rigging System (Top and Bottom) Stacking Feature: Interlocking UHMW Feet (Top and Bottom) Covering / Finish: Paint Dimensions (DWH xbackW, inches): 24 x 21 x 51.5 x 12.25 Dimensions (DWH xbackW, cm): 60.9 x 53.3 x 130.8 x 31.1 Weight (lbs/kg): 236/107 Optional Synergy Series Accessories Pick Up Bar (SAPICKUPBAR1): Single column cabinet hanging hardware (2xSA153 Plus 1xSA315S MAX) Flying Bumper (SABUMPER1): 4 wide flying bumper (8xSA153 Plus 4xSA315S MAX) SA153 Cabinet Cover (SA153COVER): Will cover 2 Cabinets (stacked) SA315S Cabinet Cover (SA315SCOVER): Will cover 1 Cabinet Cabinet Dolly (SADOLLY1): Holds 2 x SA153 stacked or 1 x SA315S

The Yorkville Sound YSM3BT Powered Studio Monitors are stylishly designed for your home or office multimedia projects. Using Bluetooth, you can wirelessly connect your phone, tablet or laptop. Sold as a stereo pair, the YSM3BT provides great audio for streaming videos, home recording, gaming and more. Product Specification:   System Type: 2.0 Powered Studio Monitor Frequency Response (Hz +/- 3db): 82Hz-20KHz Crossover Frequency (Hz): 3.0KHz HF Driver(s): 0.75 inch silk domed tweeter, 6 ohm LF Driver(s): 3.5 inch, 4 ohm LF Power Amplifier (Watts): RMS 25W x 2 LF Amplifier Type: Class AB Inputs: TRS stereo balanced, RCA stereo, 1/8 inch Aux stereo, Bluetooth LED Indicators: LED ring around volume knob on front panel Dimensions (DWH xbackW, inches): 6.3 x 5.6 x 8.6 Dimensions (DWH xbackW, cm): 16 x 14.15 x 21.8 Weight (lbs/kg): 7 / 3.2

The Yorkville Sound YXL10, Two-Way 300W Passive Portable PA Speaker - 10 Inch provide a high quality & affordable passive cabinet. The YXL Series is poised to uphold Yorkville's reputation for great sound, reliability and durability.The YXL cabinets use a single driver and 90 x 40-degree horn with 1-inch throat and 1-inch compression driver. Constructed from strong Polypropylene, YXL is poised to uphold Yorkville's reputation for reliability and durability. The cabinets can be positioned upright or used as a monitor wedge. Product Specification:  System Type: Passive Loudspeaker Active or Passive: Passive Power Rating (Watts): 300 Watts Program Sensitivity (dB @1Watt/1m): 97dB Max SPL (dB): 122dB Continuous Frequency Response (Hz +/- 3dB): 55 - 16k (Hz +/-3dB) Dispersion (°H x °V): 90 x 40 Crossover Frequency (Hz): 1.6kHz HF Horn: Integrated into Baffle LF Driver(s): 10-inch (2-inch voice coil) Feet: Rubber Bar Handles: 1 x Side / 1 x Back Flying Hardware: 2 (Top) Optional Flying Hardware: Yes Enclosure Materials: Polypropelene, Metal grille Baffle Material: Polypropylene Grille: Powder Coated Steel with Grille Cloth Other Details: Rubber feet on bottom and side with the monitor Wedge Dimensions (DWH xbackW, inches): 11 x 13.25 x 20.5 Dimensions (DWH xbackW, cm): 28 x 33.5 x 52 Weight (lbs/kg): 29.9 / 13.6

The Yorkville Sound YXL12, Two-Way 600W Passive Portable PA Speaker - 12 Inch provide of high quality & affordable passive cabinets. The YXL Series is poised to uphold Yorkville's reputation for great sound, reliability and durability.The YXL cabinets use a single driver and 90 x 40 degree horn with 1-inch throat and 1-inch compression driver. Constructed from strong Polypropylene, YXL is poised to uphold Yorkville's reputation for reliability and durability. The cabinets can be positioned upright or used as a monitor wedge. Product Specification:   System Type: Passive Loudspeaker Active or Passive: Passive Power Rating (Watts): 600 Watts Program Sensitivity (dB @1Watt/1m): 98dB Max SPL (dB): 125dB Continuous Frequency Response (Hz +/- 3dB): 47 - 16k (Hz +/-3dB) Dispersion (°H x °V): 90 x 40 Crossover Frequency (Hz): 1.6kHz HF Horn: Integrated into Baffle LF Driver(s): 12-inch (2-inch voice coil) Feet: Rubber Bar Handles: 1 x Side / 1 x Back Flying Hardware: 2 (Top), 1 (Pull Back) Optional Flying Hardware: Yes Enclosure Materials: Polypropelene, Metal grille Baffle Material: Polypropylene Grille: Powder Coated Steel with Grille Cloth Other Details: Rubber feet on bottom and side with the monitor Wedge Dimensions (DWH xbackW, inches): 11 x 13.25 x 20.5 Dimensions (DWH xbackW, cm): 28 x 33.5 x 52 Weight (lbs/kg): 35.5 / 16.1

The Yorkville Sound YXL12, Two-Way 600W Passive Portable PA Speaker - 12 Inch provide of high quality & affordable passive cabinets. The YXL Series is poised to uphold Yorkville's reputation for great sound, reliability and durability.The YXL cabinets use a single driver and 90 x 40 degree horn with 1-inch throat and 1-inch compression driver. Constructed from strong Polypropylene, YXL is poised to uphold Yorkville's reputation for reliability and durability. The cabinets can be positioned upright or used as a monitor wedge. Product Specification:   System Type: Passive Loudspeaker Active or Passive: Passive Power Rating (Watts): 600 Watts Program Sensitivity (dB @1Watt/1m): 98dB Max SPL (dB): 125dB Continuous Frequency Response (Hz +/- 3dB): 47 - 16k (Hz +/-3dB) Dispersion (°H x °V): 90 x 40 Crossover Frequency (Hz): 1.6kHz HF Horn: Integrated into Baffle LF Driver(s): 12-inch (2-inch voice coil) Feet: Rubber Bar Handles: 1 x Side / 1 x Back Flying Hardware: 2 (Top), 1 (Pull Back) Optional Flying Hardware: Yes Enclosure Materials: Polypropelene, Metal grille Baffle Material: Polypropylene Grille: Powder Coated Steel with Grille Cloth Other Details: Rubber feet on bottom and side with the monitor Wedge Dimensions (DWH xbackW, inches): 11 x 13.25 x 20.5 Dimensions (DWH xbackW, cm): 28 x 33.5 x 52 Weight (lbs/kg): 35.5 / 16.1

The Yorkville Sound YXL15, Two-Way 600W Passive Portable PA Speaker - 15 Inch. Yorkville Sound's new line of high quality & affordable passive cabinets. The YXL Series is poised to uphold Yorkville's reputation for great sound, reliability and durability. The YXL cabinets use a single driver and 90 x 40 degree horn with 1-inch throat and 1-inch compression driver. Constructed from strong Polypropylene, YXL is poised to uphold Yorkville's reputation for reliability and durability. The cabinets can be positioned upright or used as a monitor wedge. Product Specifications: System Type: Passive Loudspeaker Active or Passive: Passive Power Rating (Watts): 600 Watts Program Sensitivity (dB @1Watt/1m): 98dB Max SPL (dB): 125dB Continuous Frequency Response (Hz +/- 3dB): 45 - 16k (Hz +/-3dB) Dispersion (°H x °V): 90 x 40 Crossover Frequency (Hz): 1.6kHz HF Horn: Integrated into Baffle LF Driver(s): 15-inch (3-inch voice coil) Feet: Rubber Bar Handles: 2 x Side / 1 x Back Flying Hardware: 2 (Top), 1 (Pull Back) Optional Flying Hardware: Yes Grille: Powder Coated Steel with Grille Cloth Dimensions (DWH xbackW, inches): 14.75 x 17 x 27.375 Weight (lbs/kg): 50 / 23

The Yorkville YXL10P cabinets use a single driver and 90 x 60 degree horn with 1-inch throat and 1-inch compression driver. Constructed from strong Polypropylene, YXL is poised to uphold Yorkville's reputation for reliability and durability. The cabinets can be positioned upright or used as a monitor wedge. Designed as an all-purpose speaker with the Musician & DJ in mind, each YXL cabinet features 3 channels. The cabinet supports Bluetooth streaming and EQ pushbutton controls for Concert, Club & Monitor modes. Product Specification: System Type: Active Loudspeaker Active or Passive: Active Power Rating (Watts): 500 Watts Program (1000 Watts Peak) Max SPL (dB): 126dB Peak Frequency Response (Hz +/- 3dB): 55 - 16k (Hz +/-3dB) Dispersion (°H x °V): 90 x 40 Crossover Frequency (Hz): 1.6kHz HF Horn: Integrated into Baffle LF Driver(s): 10-inch (2-inch voice coil) LF Power Rating(Watts): 450 Watts Program (900 Watts Peak) HF Power Amplifier (Watts): 50 HF Amplifier Type: Class A/B LF Amplifier Type: Class D Cooling Scheme: Speed controlled fan Power Cable: Yes Power Switch: Yes Inputs: 2 x XLR, 2 x 1/4", 1/8", Bluetooth and Main in (XLR) Level Controls: x3 Chanels + Master EQ Controls: Push button select, Concert, Club, Monitor Limiter: Multiband excursion, RMS, rail Other Controls / Features: Sub mode HP filter, Mixer IN/OUT, Stereo/Mono out, 3.5mm Aux in, BT streaming Feet: Rubber Bar Handles: 1 x Side / 1 x Back Flying Hardware: 2 (Top), 1 (Pullback) Optional Flying Hardware: Yes Enclosure Materials: Polypropelene, Metal grille Baffle Material: Polypropylene Grille: Powder Coated Steel with Grille Cloth Other Details: Rubber feet on bottom and side with the monitor Wedge Dimensions (DWH xbackW, inches): 11 x 13.25 x 20.5 Dimensions (DWH xbackW, cm): 28 x 33.5 x 52 Weight (lbs/kg): 28 / 14