00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P400X4 400W Punch Series 4-Channel Stereo Class AB Car Power Amplifier (P400X.4)
$339.99
$499.99
Rockford Fosgate Punch P400X4 400W Punch Series 4-Channel Stereo Class AB Car Power Amplifier (P400X.4)
The P400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the P400X4 is an excellent amplifier choice for virtually any vehicle.
The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.The stealth top-mounted control panel not only provides a sleek finished look to the amp but also protects the vital controls.Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.
General Features:
Rockford Fosgate Punch Series P400X4
Class-AB FullRange 2-Ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 50 watts x 4 channel
2 ohms: 100 watts x 4 channel
Bridged, 4 ohms: 200 watts x 2 channel
CEA-2006 Compliant Amplifier
Features C.L.E.A.N. Set-up with 10-step set-up procedure
w/ input/output clip detection and indicator LEDs
Pulse Width Modulated MOSFET power supply
LED power (blue) and protect (red) indicators
Stealth top-mounted control panel
Soft start turn-on
4, 3, or 2 channel operation
Nickel-plated RCA level inputs
Nickel-plated captive C-clamp terminals
High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately. Up to TWO adapters needed for this amplifier.)
3-way protection circuitry (thermal, overload, and speaker short protection)
On-board differential inputs eliminate noise picked up by the signal cable
Integrated Trans•ana technology simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality
MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span
DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers
Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances
Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low
Input sensitivity: 150mV - 12V
Frequency Response: 20 - 20,000 Hz
Total Harmonic Distortion (THD): <1.0%
Signal to Noise Ration: 105dB
Selectable crossover modes: LP / AP / HP
Variable crossover filter: 50 - 250 Hz, 12 dB/octave
Variable Bass Boost, Punch EQ: 0 to +14 dB bass boost at 12.5kHz
Variable Bass Boost, Punch EQ: 0 to +18 dB bass boost at 45Hz
Fuse Rating: 60 A x 1 inline fuse recommended, not included
8 - 18 gauge speaker wire connections
4- 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
8 Gauge is perfect for a full 4-ohm setup, while 4 Gauge is recommended for a full 2-ohm setup
Dimensions: 11.03"W x 7.76"L x 2.38"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the box:
4-Channel amplifier
Four 1-1/2" Self-tapping screws
2.5mm Allen wrench
Quick setup instructions
Certificate of Performance
Rockford Fosgate Punch P400X4 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Power T400-4 4-channel car amplifier 60 watts x 4
$399.99
$699.99
Rockford Fosgate Power T400-4 4-channel car amplifier 60 watts x 4
Rockford Fosgate's Power Series AmplifiersRockford Fosgate has a well-deserved reputation for building high-quality mobile audio products. Their Power Series amps occupy the top of the amplifier food chain, with fine-tuned audio controls, extreme durability, and proprietary technologies that deliver stronger, more reliable performance than most other amplifiers on the market today.
Dynamic Thermal ManagementPower Series amps use Rockford Fosgate's patented, award-winning "Dynamic Thermal Management," a 3-stage cooling system that uses forced air to dissipate heat evenly across the amp and out through the large heatsinks. This results in cooler internal components, higher efficiency, and lower distortion.MEHSA is a Rockford Fosgate proprietary process that increases heat transfer from the MOSFET devices to the heatsink. This allows the heat to escape more readily from the amplifier so that the transistors stay cooler.
Extra-quiet inputs"Differential Input" circuitry helps eliminate any electronically induced noise or hum that could be picked up by the input cables, allowing only clean signals to enter the amplifier. You get more music with less heat and noise in a stylish package that's up to 40% smaller than previous models.
T400-4 Power performanceThe T400-4 amplifier puts out 60 watts RMS into each of its four channels — more than enough to drive your front and rear speakers to their musical peaks. Or you can bridge your T400-4 to blast 200 watts each to a pair of subwoofers. Either way, you can depend on clean, powerful sound from your Power Series amp.Product highlights:
4-channel car amplifier
60 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
200 watts RMS x 2 bridged output at 4 ohms (2-ohm stable in bridged mode)
CEA-2006 compliant
Dynamic Thermal Management cooling system
Differential Input circuitry eliminates hum
variable high- and low-pass filters (50-500 Hz, 24 dB/octave)
variable bass/treble boost (0-18 dB at 45 Hz, 0-12 dB at 12k Hz)
optional remote bass/treble boost (available soon)
Class-AB amplifier design
MOSFET power and output stages
preamp inputs
4-gauge power and ground leads and a 100-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
13-5/8"W x 2-1/4"H x 9-5/8"D
warranty: 2 years
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P500X1bd Mono subwoofer amplifier 500 watts RMS x 1 at 1 ohm
$389.99
$499.99
Rockford Fosgate Punch P500X1bd Mono subwoofer amplifier 500 watts RMS x 1 at 1 ohm
Big power for your sub or subsystem
Rockford Fosgate's Punch P500X1bd subwoofer amp can produce up to 500 watts RMS, giving you plenty of clean power for your rhythm track. And the P500X1bd can drive a 1-ohm load, so you can power multiple subs without any trouble. A low-pass filter keeps the high notes away from your sub, while a subsonic filter helps you rein in runaway boom. The Punch bass boost lets you add some of that boom back into the mix when it's needed.
Easy to set for optimum performance
Once again, Rockford Fosgate steps away from the crowd with their C.L.E.A.N. technology (Calibrated Level Eliminates Audible Noise) — a setup system that ensures your music will sound as clean and powerful as possible. It works like this: first, download the setup tones from Rockford Fosgate, then play the tone, adjust the receiver volume until a red clip light on the amp goes out, then turn the amp gain up until a blue light comes on. It's that simple — your amplifier will be perfectly set to match your receiver's output. When your receiver reaches maximum clean volume, you'll get maximum clean power from your power amp. At quiet listening levels, you'll hear less background noise and more of your music.
Keeps an eye on things while playingIf that blue light turns solid red while you're playing music, the amp's telling you that your source is distorting and you should turn it down, or risk damage to your gear. The optional PLC2 remote level control also doubles as a clip indicator, so you can see from the front seat if your music's clipping. The amp's built-in computer keeps tabs on the output current, ensuring that plunging speaker impedances (they change during play) or even a short circuit won't hurt anything.
Maintaining coolness raises efficiency and lowers distortionRockford Fosgate's Dynamic Thermal Management system uses forced air to dissipate heat evenly across the amp and out through the high-mass heatsink, efficiently drawing heat away from vital internal parts. Their proprietary MEHSA cooling process maximizes the heat transfer from the MOSFET devices to the heatsink, allowing the heat to escape more readily, so the transistors stay cooler and work better.
Product highlights:
mono subwoofer amplifier
150 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
500 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Features:
variable low-pass filter filter (50-250 Hz, 12 dB/octave)
selectable subsonic filter (28Hz, 12 dB/octave)
variable PEQ2 bass boost (0-18 dB at 45 Hz)
C.L.E.A.N. gain setup system includes clip lights and link to Rockford Fosgate's setup tones
Class-BD amplifier design
frequency response: 20-250 Hz
Dynamic Thermal Management and MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp inputs and outputs
speaker-level inputs (speaker wire to RCA adapter required)
signal-sensing turn-on with speaker-level inputs eliminate the need for remote turn-on lead
More Info:
optional PLC2 wired remote level control with clip light available
4-gauge power and ground leads and an 80-amp fuse recommended — wiring and hardware not included with amplifier
no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended
11-1/8"W x 2-7/16"H x 8-13/16"D
warranty: 1 year
What is in the P500X1bd box:
Mono subwoofer amplifier
Four 1-1/2" Self-tapping screws
2.5mm Allen wrench
Quick setup instructions
Certificate of Performance
P500X1bd owner's manual
⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm
$499.99
$799.99
Rockford Fosgate Punch P1000X1bd Mono subwoofer amplifier 1,000 watts RMS x 1 at 1 ohm
The Punch P1000X1bd mono amplifier pumps out 1,000 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response is optimized for subwoofers. With its super-efficient Class-BD circuit topology, the P1000X1bd assures maximum BOOM for your buck! Due to its dedicated low-frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will easily drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers.
General Features:
Punch BD Series Monoblock Class BD Car Amplifier
RMS Power Rating:
4 ohms: 300 watts x 1 channel
2 ohms: 500 watts x 1 channel
1 ohm: 1000 watts x 1 channel
CEA-2006 compliant amplifier
Features C.L.E.A.N. Set-up with the 10-step set-up procedure
w/ input/output clip detection and indicator LEDs
MOSFET power supply
Muted turn on
Cast aluminum heatsink
12dB/octave Butterworth crossover
Stealth top-mounted control panel
LED power, thermal, and protection indicators
Nickel-plated captive C-clamp terminals
Ultra-efficient Class BD circuitry to maximize amplifier power efficiency
On-board differential inputs eliminate noise picked up by the signal cable
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span
Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances
Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low
DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowering the operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers
Input sensitivity: 150mV - 12V
On-board Punch EQ with +18dB boost @ 45Hz.
Variable low-pass filter: 50-250 Hz
Selectable infrasonic filter: off / 28 Hz
Frequency response: 20 - 250 Hz
Total Harmonic Distortion: <1.0%
Dimensions: 13-5/16"L x 7-3/4"W x 2-3/8"H
8 AWG to 18 AWG speaker wire output terminals
4 gauge power and ground wiring is recommended for installation.
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the P1000X1bd package:
P1000X1bd owner's manual
Mono subwoofer amplifier
Four 1-1/2" Self-tapping screws
5mm Allen wrench
Quick setup instructions
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate - P500X1bd - Class D Amplifiers
$389.99
$719.99
Rockford Fosgate Punch P500X1BD 500W RMS Punch Series Monoblock Class D Car Power Amplifier
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers.
General Features
Punch BD Series Monoblock Class BD Car Amplifier
RMS Power Rating:
4 ohms: 150 watts x 1 chan.
2 ohms: 300 watts x 1 chan.
1 ohm: 500 watts x 1 chan.
CEA-2006 compliant amplifier
MOSFET power supply
Muted turn-on.
Cast aluminum heatsink.
12dB/octave Butterworth crossover
Stealth top-mounted control panel
LED power, thermal, and protect indicators.
Nickel-plated captive C-clamp terminals.
Ultra-efficient Class BD circuitry to maximize amplifier power efficiency.
On-board differential inputs eliminate noise picked up by the signal cable.
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
High-level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately)
MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span.
Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low.
DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving the efficiency of the circuit and lowers the operating temperature and potential for noise-like circuit boards designed by aerospace manufacturers.
Input sensitivity: 150mV - 12V
On-board Punch EQ with +18dB boost @ 45Hz.
Variable low-pass filter: 50-250 Hz
Selectable infrasonic filter: off / 28 Hz
Frequency response: 20 - 250 Hz
Total Harmonic Distortion: <1.0%
Dimensions: 11"L x 7-3/4"W x 2-3/8"H
8 AWG to 18 AWG speaker wire output terminals
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the P500X1bd box:
Mono subwoofer amplifier
Four 1-1/2" Self-tapping screws
2.5mm Allen wrench
Quick setup instructions
Certificate of Performance
P500X1bd owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate R300X4 300W 4 Channel Car Truck RV Amplifier
$279.99
$379.99
Rockford Fosgate R2-300X4 Prime Series 300 Watts 4-Channel Class D Amplifier
Primed for performance, the R2-300X4 is a 300-watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology, which reduces the vehicle's electrical system demand. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases.
General Features:
Rockford Fosgate Prime R2-300X4
Class-D Full-Range 4-Channel Amplifier
50 watts RMS x 4 at 4 ohms
75 watts RMS x 4 at 2 ohms
150 watts RMS x 2 bridged output at 4 ohms bridged mode
Total power output: 3000 watts
Balanced Differential Inputs with RCA Pass Through Outputs
High-Level Input Capable
Defeat able Auto Turn-On Circuit
Features C.L.E.A.N. Set-up
2/4 Channel Input Selection Switch
Front and Rear Variable Input Gain adjustment level
Continuously Variable on-Board Punch EQ
Top Mounted Control Panel
Short Circuit & Over Current Protection
CEA-2006 Compliant & CE Compliant
Full Range Class D
Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
1 Year Warranty
Low level: 125mV-5V
High level: 250mV-10V
Frequency Response: 20 Hz - 20 kHz Hz
Total Harmonic Distortion (THD): <1%
Variable high-pass filter: 50 - 250 Hz, 24 dB/octave
Variable low-pass filter: 50 - 250 Hz, 24 dB/octave
Recommended Fuse Rating: 60A
Dimensions: 1.9" x "6.8" x "10.1"
Authorized Internet Dealer
1-year Manufacturer's Warranty
What is in the R2-300X4 package:
R2-300X4 Owner's Manual
4-Channel amplifier
Two 7" Speaker input harnesses
3mm Allen Hex key
Four 3/4" Screws
4 Flat washers
Installation and Operation Instructions
Certificate of Performance
Rockford Fosgate contact information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Prime R2-750X1 750W RMS Prime Series Class-D Monoblock 1-Ohm Stable Amplifier
$349.99
$550.00
Rockford Fosgate Prime R2-750X1 750W RMS Prime Series Class-D Monoblock 1-Ohm Stable AmplifierLooking for a monoblock with reliable power ratings and efficiency without spending a fortune? Rockford Fosgate's R2-750X1. With a rating of 250 watts x 1 channel @ 4 ohms, 500 watts x 1 channel @ 2 ohms, and 750 watts x 1 channel at 1 ohm, this amplifier is perfect for those looking to amplify anything from entry-level to some more serious power at the 1-ohm rating. Fine-tuning your amplifier will be a cinch using the variable high-pass, infrasonic, and variable bass boost crossovers. A cast aluminum heat sink will control heat dissipation to keep your amplifier running cool and efficiently no matter how long or short your listening sessions are. So if you are looking for a Class D highly efficient monoblock amplifier that will never let you down, look no further than Rockford Fosgate's R2-750X1.
General Features:
Rockford Fosgate Prime R2-750X1
Class-D FullRange MonoBlock Amplifier
RMS Power Rating: 4 ohms: 250 watts x 1 channel
RMS Power Rating: 2 ohms: 500 watts x 1 channel
RMS Power Rating: 1 ohm: 750 watts x 1 channel
Total power output: 500 watts
Balanced Differential Inputs with RCA Pass Through Outputs
High-Level Input Capable
Defeatable Auto Turn-On Circuit
Features C.L.E.A.N. Set-up
Variable Input Gain adjustment level
R.L.C. Remote Level Control
Variable Infrasonic Filter
Continuously Variable On Board Punch EQ
Top Mounted Control Panel
Short Circuit & Over Current Protection
CEA-2006 Compliant & CE Compliant
Full Range Class D
Rollback Protection
Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
Input sensitivity:
Low-Level: 150 mV - 4 V
High-Level: 450 mV - 12 V
Frequency Response: 20 Hz - 250 Hz
Total Harmonic Distortion (THD): >1%
Crossover Controls
Low-Pass: 50 Hz - 250 Hz
Sub Infrasonic: 15 Hz - 40 Hz
Recommended Fuse Rating: 120A
4 gauge power and ground wiring is recommended for installation
Dimensions: "1.9" x "6.8" x "10.1"
Authorized Internet Dealer
1-Year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.