Ported Vented Empty Subwoofer Enclosures Boxes (49)

Alpine R2-SB12V-BNDL Bass Boost Package Includes R2-SB12V 12" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control package includes Alpine R2-SB12V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control Alpine R2-SB12V R-Series 12″ Halo Subwoofer with ProLink™ 2Ω A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design and ProLink™. The new 2nd generation R-Series subwoofers take bass performance to extreme levels, delivering thunderous, ground-pounding bass. With Alpine’s enhanced sound performance, the R-Series subwoofers are highly accurate, creating a perfectly matched sound system to R-Series amplifiers and R-Series speakers – building an overall cohesive theme with its entire full-range Hi-RES Audio certified system. The R2-SB12V is designed for amplifier compatibility with 20hm loads. General Features: Dual 12" Vented / Ported Subwoofer Enclosure Power Handling: Peak: 2250 watts Total RMS: 750 watts Total Preloaded with single 12" Subwoofers Vented / Ported Square/Rectangle enclosure Enclosure Dimensions: 15" TD x BD x 17" W x 14.62" H Groundbreaking Alpine Halo Design ProLink™ ported enclosure design Optimal Sound Performance Includes preloaded R-W12D4 12” R-Series subwoofer CARB-compliant 3/4-inch MDF construction Premium black carpet Silver Alpine embossed side logo badge Brushed aluminum finished metallic front baffle Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: Frequency Response: 24 - 200 Hz Sensitivity: 85 dB Enclosure Features: 12" Square/Rectangle Enclosure Box Finish: Carpet What's in the R2-SB12V package: R2-SB12V Owner's manual Ported enclosure loaded with one R2-W12D4 subwoofer driver Warranty information Product registration information Safety notice Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the S-A60M package: S-A60M owner's manual Mono subwoofer amplifier Four 3/4" Screws 2mm Allen wrench Owner's manual Alpine Verification Certificate Online product registration information Alpine RUX-KNOB.2 Remote Bass Knob for Alpine Amplifiers General Features: Remote Bass Level Control Knob 16-1/2" (5 meters) Connection cable Plugs directly in for quick direct subwoofer control Specifically designed as the controller for use with any of the following PDX Amplifiers: PDX-M12, and PDX-M6 Easily adjust the bass gain of your amp while seated inside Control multiple amps from just one RUX-KNOB controller Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the package: Alpine Remote Bass Level Control module 16.4'  connecting cable  4 Self-tapping screws ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Alpine R2-SB10V-BNDL Bass Boost Package Includes R2-SB10V 10" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control package includes Alpine R2-SB10V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control Alpine R2-SB10V R-Series 10″ Halo Subwoofer with ProLink™ 2Ω A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design and ProLink™. The new 2nd generation R-Series subwoofers take bass performance to extreme levels, delivering thunderous, ground-pounding bass. With Alpine’s enhanced sound performance, the R-Series subwoofers are highly accurate, creating a perfectly matched sound system to R-Series amplifiers and R-Series speakers – building an overall cohesive theme with its entire full-range Hi-RES Audio certified system. The R2-SB10V is designed for amplifier compatibility with 20hm loads. General Features: Dual 10" Vented / Ported Subwoofer Enclosure Power Handling: Peak: 2250 watts Total RMS: 750 watts Total Preloaded with single 10" Subwoofers Vented / Ported Square/Rectangle enclosure Enclosure Dimensions: 14.5" TD x BD x 16" W x 12.68" H Groundbreaking Alpine Halo Design ProLink™ ported enclosure design Optimal Sound Performance Includes preloaded R-W10D4 10” R-Series subwoofer CARB-compliant 3/4-inch MDF construction Premium black carpet Silver Alpine embossed side logo badge Brushed aluminum finished metallic front baffle Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: Frequency Response: 24 - 200 Hz Sensitivity: 85 dB Enclosure Features: 10" Square/Rectangle Enclosure Box Finish: Carpet What's in the R2-SB10V package: R2-SB10V Owner's manual Ported enclosure loaded with one R2-W10D4 subwoofer driver Warranty information Product registration information Safety notice Alpine S-A60M S-Series Monoblock Class-D Amplifier 600W RMSThe Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.General Features: Alpine S-Series Mono Power Amplifier - S-A60M RMS Power Output: 400W x 1 @ 4 Ohms (14.4V < 1% THD+N) 600W x 1 @ 2 Ohms (14.4V < 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohms), >105dB (ref: rated power into 4 ohms) Remote bass knob compatible (requires RUX-KNOB.2, sold separately) CTA-2006 compliant THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10HZ-400Hz (+/- 3 dB) Damping Factor: > 1000 variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) Speaker-level inputs (Speaker Wire to RCA Adapter Required) Preamp Inputs Improved heat sink and protection circuit design that eliminates thermal shut-down for dependable music playback Remote Sensing automatic turn-on when using speaker-level inputs Approximate Weight: 11 lbs Fuse Rating: fuse rating: 30A x 2 Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select from our website when purchased together with this amplifier. Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What's in the S-A60M package: S-A60M owner's manual Mono subwoofer amplifier Four 3/4" Screws 2mm Allen wrench Owner's manual Alpine Verification Certificate Online product registration information Alpine RUX-KNOB.2 Remote Bass Knob for Alpine Amplifiers General Features: Remote Bass Level Control Knob 16-1/2" (5 meters) Connection cable Plugs directly in for quick direct subwoofer control Specifically designed as the controller for use with any of the following PDX Amplifiers: PDX-M12, and PDX-M6 Easily adjust the bass gain of your amp while seated inside Control multiple amps from just one RUX-KNOB controller Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the package: Alpine Remote Bass Level Control module 16.4'  connecting cable  4 Self-tapping screws ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB10V-BNDL Bass Boost Package Includes S-SB10V 10" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control Everything you need This Alpine Bass Boost bundle gives you everything you need to add some solid bass to your car system. The package includes their S-SB10V subwoofer enclosure, the S-A60M amplifier, and the RUX-KNOB.2 remote level control. The S-SB10V Halo Series enclosure features their S-W10D4 10" subwoofer in a rugged MDF enclosure with black carpet covering, wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you thumping bass at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance. And when you're ready to expand your low end even more, you can add a second S-SB10V and link the enclosures together with their KTX-H10 linking kit (sold separately). Powerful amplification With 600 watts of power in a 8" x 8" x 2.5" package, the S-A60M amplifier is a perfect match for the enclosure. The amp includes Alpine's Enhanced Shutdown Performance technology to lower the output if the amp runs too hot. Instead of shutting down completely, it continues playing your music until it cools enough to return to full power. Its low-pass filter and adjustable bass boost let you dial in your sound. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. If you're using the speaker-level inputs, the amp senses an incoming signal and turns itself on, eliminating the need to run a turn-on wire back to your vehicle's receiver or fuse box. Control your sound The RUX-KNOB.2 remote level controller adjusts the amp's level from its set maximum volume all the way down to virtually "off." Since it adjusts level and not "bass boost," you'll maintain the same bass tone as you turn the volume up and down. A 16-foot connecting cable gives you plenty of length to run from the amp to the front of the vehicle. Product highlights: package includes Alpine S-SB10V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control S-SB10V Halo Series enclosure: S-W10D4 subwoofer ported enclosure power handling: 600 watts RMS frequency response: 28-200 Hz 2-ohm impedance enclosure dimensions: 16"W x 12.75"H x 15"D warranty: 1 year S-A60M mono amplifier: 600 watts RMS x 1 at 2 ohms variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) preamp and speaker-level inputs Remote Sensing automatic turn-on when using speaker-level inputs dimensions: 8.045"W x 2.28"H x 8.06"D warranty: 1 year RUX-KNOB.2 remote level control: adjusts gain from 0 to -12 dB 16' connection cable warranty: 1 year MFR # S-SB10V-BNDL What's in the box: Alpine S-SB10V: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on subwoofer) Alpine S-A60M: Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note On-line product registration information Alpine RUX-KNOB.2: Remote Bass Level Control module 16.4' (5 meter) connecting cable (RJ-14 plugs on both ends) Four 1/2" Screws ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB12V-BNDL Bass Boost Package Includes S-SB12V 12" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control Everything you need This Alpine Bass Boost bundle gives you everything you need to add some solid bass to your car system. The package includes their S-SB12V subwoofer enclosure, the S-A60M amplifier, and the RUX-KNOB.2 remote level control. The S-SB12V Halo Series enclosure features their S-W12D4 12" subwoofer in a rugged MDF enclosure with black carpet covering, wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you thumping bass at power levels up to 600 watts RMS. The ported enclosure is tuned to 35 Hz to maximize performance. And when you're ready to expand your low end even more, you can add a second S-W12D4 and link the enclosures together with their KTX-H12 linking kit (sold separately). Powerful amplification With 600 watts of power in a 8" x 8" x 2.5" package, the S-A60M amplifier is a perfect match for the enclosure. The amp includes Alpine's Enhanced Shutdown Performance technology to lower the output if the amp runs too hot. Instead of shutting down completely, it continues playing your music until it cools enough to return to full power. Its low-pass filter and adjustable bass boost let you dial in your sound. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. If you're using the speaker-level inputs, the amp senses an incoming signal and turns itself on, eliminating the need to run a turn-on wire back to your vehicle's receiver or fuse box. Control your sound The RUX-KNOB.2 remote level controller adjusts the amp's level from its set maximum volume all the way down to virtually "off." Since it adjusts level and not "bass boost," you'll maintain the same bass tone as you turn the volume up and down. A 16-foot connecting cable gives you plenty of length to run from the amp to the front of the vehicle. Product highlights: package includes Alpine S-SB12V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control S-SB12V Halo Series enclosure: S-W12D4 subwoofer ported enclosure power handling: 600 watts RMS frequency response: 26-200 Hz 2-ohm impedance enclosure dimensions: 17"W x 14.75"H x 15.5"D warranty: 1 year S-A60M mono amplifier: 600 watts RMS x 1 at 2 ohms variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) preamp and speaker-level inputs Remote Sensing automatic turn-on when using speaker-level inputs dimensions: 8.045"W x 2.28"H x 8.06"D warranty: 1 year RUX-KNOB.2 remote level control: adjusts gain from 0 to -12 dB 16' connection cable warranty: 1 year MFR # S-SB12V-BNDL What's in the box: Alpine S-SB12V: Ported enclosure loaded with one S-W12D4 subwoofer driver Rubber flange protector (installed on subwoofer) Alpine S-A60M: Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note On-line product registration information Alpine RUX-KNOB.2: Remote Bass Level Control module 16.4' (5 meter) connecting cable (RJ-14 plugs on both ends) Four 1/2" Screws ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V-PWR Halo 10" Bass Package Includes S-SB10V linkable 10" ported sub enclosure and KTA-200M compact 200-watt mono amplifier Lively up your bass with this Alpine package Alpine combined two of their most forward-thinking products for this S-SB10V-PWR bass package: the KTA-200M power pack subwoofer amplifier and the S-SBV10 Halo Series 10" loaded ported sub enclosure. You get a propulsive pairing that'll fill your ride with the vibrant thump only solid bass can provide. Kicking compact amp Alpine's KTA-200M power pack subwoofer amplifier sends out up to 200 watts RMS to the sub from a chassis about the size of your hand. The amp uses Alpine's Dynamic Peak Power (DPP) technology to deliver a quick energy boost when needed, virtually doubling the amplifier's output power on musical peaks. PowerStack Installation The KTA-200M includes a PowerStack bracket for mounting the amp in your dash behind Alpine's shallow chassis iLX-W650 digital multimedia receiver. The combined depth of the receiver and amp is still less than 5", so it'll fit in a wide variety of vehicles. The receiver and sub amp together make a feature-filled and powerful sound system that you'll enjoy for many miles. Rugged Halo Series box and 10" sub The S-SB10V comes loaded with Alpine's S-W10D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance. Double the fun This Halo Series sub enclosure sounds great on its own, but when you want to expand your system, you can add a second Halo bass package to create a single two-speaker system with twice the power and double the impact. You can link two S-SB10V boxes using Alpine's KTX-H10 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look. Product highlights: package includes Alpine KTA-200M mono sub amp and S-SB10V ported enclosure with 10" subwoofer KTA-200M 200-watt compact amplifier: 200 watts RMS x 1 at 4 ohms or 2 ohms CTA-2006 compliant Dynamic Peak Power (DPP) technology adds a burst of power when needed selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs PowerStack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver (item #500ILXW650) wiring, hardware, and fuse not included with amplifier 12-gauge power and ground leads and a 20A fuse recommended dimensions: 7-3/4"W (with wiring) x 1-3/8"H x 3-9/16"D warranty: 1 year S-SB10V Halo Series 10" linkable ported subwoofer enclosure: loaded with Alpine's S-W10D4 subwoofer linkable to second S-SB10V enclosure with linking kit (sold separately) Kevlar-reinforced pulp cone with Santoprene rubber surround power handling: 600 watts RMS frequency response: 28-200 Hz 2-ohm impedance dimensions: 16"W x 12-3/4"H x 15"D warranty: 1 year MFR # S-SB10V-PWR What's in the box: Alpine S-SB10V: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on subwoofer) Alpine KTA-200M: Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Four 8" Zip Ties Owner's Manual (English/ French/ Spanish) Warranty information Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute USA VEGD12 Dual 12" Slot Vented Ported Universal Subwoofer Sub Box Enclosure Empty Box Absolute USA introduces its Vented Ported series line-up of high-performance subwoofer enclosures to bridge the gap between competition-grade quality and universal-fitting pre-fabricated enclosures. The VEGD12 subwoofer enclosure is a dual 12-inch, universal fit, ported subwoofer enclosure designed for maximum bass and responsiveness. and If you're looking for a big sound in a solid package. To get that sound, you need the right box, and the Absolute USA VEGD12 enclosure features a ported design that'll give you that extra boom you're looking for. Absolute USA VEGD12 ported enclosure holds two 12" subwoofers. Its large vents feature rounded inner corners that keep port noise minimum for a more accurate response. Just add the right sub, amp, and wiring, then mount the enclosure securely, and you're ready to hit the road with some real bass artillery in your arsenal. General Features: Dual 12" Vented Ported sub box Subwoofer enclosure 3/4" MDF (Medium Density Fiberboard) construction Encased in durable black carpeting Premium carpeted finish Silver spring-loaded binding post terminals Banana clip ready Tuned Ported Slots to optimize Bass Response Subwoofer mounting depth: 15-1/4" Subwoofer cutout diameter: 11-1/4" Box volume: 1.635 cubic feet (per chamber) Total box volume: 3.27 cubic feet Port volume: 0.16 cubic feet (per port) Dimensions: 32.24"W x 17.52"W x 13.5"H Dimensions 819mmX445mmX343mm 2 Years Manufacturer Warranty This universal enclosure box fits most 12" round subwoofers such as Alpine, Kicker, Kenwood, Pioneer, Sony, JVC, JBL, Boss Audio, Diamond Audio, Hifonics, Cerwin-Vega, Rockford-Fosgate and ... ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Absolute USA PSEB10BK Single 10-Inch Ported Subwoofer Enclosure with Black High Gloss Face Board Single 10" Ported Subwoofer Enclosure w/ Black High Gloss Face Board General Features: Single 10" Ported Subwoofer Enclosure Made from durable 3/4" Medium Density Fiberboard (MDF) Black high gloss front face board Covered in durable black carpet Binding post terminals on the back of the enclosure Each terminal is banana-clip ready Square box enclosure universal for most vehicles Front Panel is Black Also available in Yellow, Blue, Pink, Red, and Silver Subwoofer mounting depth: 10" Subwoofer cutout diameter: 9-1/8" Total Box volume: 1.0 cubic feet Dimensions: 14"D x 16-1/2"W x 14"H Authorized Internet Dealer ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute USA PSEB10SI Single 10-Inch Ported Subwoofer Enclosure with Silver High Gloss Face Board Single 10" Ported Subwoofer Enclosure w/ Silver High Gloss Face Board General Features: Single 10" Ported Subwoofer Enclosure Made from durable 3/4" Medium Density Fiberboard (MDF) Black high gloss front face board Covered in durable black carpet Binding post terminals on the back of the enclosure Each terminal is banana-clip ready Square box enclosure universal for most vehicles Front Panel is Silver Also available in Yellow, Blue, Pink, Red, and Silver Subwoofer mounting depth: 10" Subwoofer cutout diameter: 9-1/8" Total Box volume: 1.0 cubic feet Dimensions: 14"D x 16-1/2"W x 14"H Authorized Internet Dealer ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Absolute PDEB10RD (Red/black) Dual 10", 3/4" MDF Twin Port Subwoofer Enclosure w/ Red High Gloss Face Board General Features: Dual 10" Ported Subwoofer Enclosure Made from durable 3/4" Medium Density Fiberboard (MDF) Red high gloss front face board Covered in durable black carpet Two binding post terminals on the back of the enclosure Each terminal is banana-clip ready Square box enclosure universal for most vehicles Front Panel is Red Also available in Black, Blue, Pink, Yellow, and Silver Subwoofer mounting depth: 10" Subwoofer cutout diameter: 9-1/8" Total Box volume: 2.0 cubic feet Box volume: 1.0 cubic feet (per chamber) Dimensions: 14"D x 30-1/2"W x 14"H Authorized Internet Dealer Port Specifications: Dual rectangular slot ports Number of ports: 2 Port volume: 0.2 cubic feet (per port) Total port volume: 0.4 cubic feet Port dimensions: 19"D x 1-1/2"W x 12-1/4"H ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Absolute SKS12V Single 12-Inch Kicker Solo-Baric Square Slot-Ported Sub Box Built for a Kicker 12-Inch Square S12L3/S12L5/S12L7 Subwoofer Solid MDF Construction Durable Carpet Gold-Plated Binding Post Terminals Slot -Port Tuned 38Hz General Feature: 12" Square Hole, Rear Ported Subwoofer Enclosure for Kicker Solo-Baric L3/L7 Subwoofers ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Absolute PDEB10PI (Pink/black) Dual 10", 3/4" MDF Twin Port Subwoofer Enclosure with Pink High Gloss Face Board General Features: Dual 10" Ported Subwoofer Enclosure Made from durable 3/4" Medium Density Fiberboard (MDF) Pink high gloss front face board Covered in durable black carpet Two binding post terminals on the back of the enclosure Each terminal is banana-clip ready Square box enclosure universal for most vehicles Front Panel is Red Also available in Black, Blue, Pink, Yellow, and Silver Subwoofer mounting depth: 10" Subwoofer cutout diameter: 9-1/8" Total Box volume: 2.0 cubic feet Box volume: 1.0 cubic feet (per chamber) Dimensions: 14"D x 30-1/2"W x 14"H Authorized Internet Dealer Port Specifications: Dual rectangular slot ports Number of ports: 2 Port volume: 0.2 cubic feet (per port) Total port volume: 0.4 cubic feet Port dimensions: 19"D x 1-1/2"W x 12-1/4"H ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov