00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate M2-500X1 Monoblock Marine Amplifier
$349.99
$599.98
Rockford Fosgate M2-500X1 Monoblock Marine Amplifier
Rockford Fosgate M2-500X1 500 Watt Monoblock marine amplifierDesigned to withstand the elements, the M2-500X1 Element Ready™ amplifier is a 500 watt, class-D model, capable of operating at 4Ω or 2Ω mono. This amplifier is extremely efficient because of its class D technology which reduces demand on the electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. For subwoofers, a variable infrasonic filter and remote level control allow you to tune the bass for the desired level for the music.
General Features:
Element Ready™ design protects against outdoor exposure
Conformal coated circuit board protects against dust and water
UV stable powder-coated cast aluminum heatsink
Zinc Nickel-plated Marine grade brass connection terminals
C.L.E.A.N. input/output clip detection and indicator LEDs
MEHSA 4 (Maximum Efficiency Heat Sink Application)
NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Optimized using AudioGraph PowerCube measurement tool
Continuously Variable On Board Punch EQ
Includes RLC Remote Level Control
Focused mass heatsink design
Top Mounted Control Panel
Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
Short Circuit & Over Current Protection
Variable Infrasonic Filter
Integrated Power and Speaker Terminals
Balanced Differential Inputs via Speaker Line or RCA Inputs
RCA pass-thru outputs
Integration with OEM and Aftermarket Radios
"Auto-Sense" turn-on with remote out (high level in)
Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
Low Impedance Stability
Proprietary testing using RATS (Rockford Automated Testing System)
CEA-2006 Compliant & CE Compliant
Rollback Protection
Power Ratings: 300 Watts x 1 @ 4 ohms
Power Ratings: 500 Watts x 1 @ 2 ohms
Dynamic Power Ratings: 350 Watts x 1 @ 4 ohms
Dynamic Power Ratings: 590 Watts x 1 @ 2 ohms
Frequency Response: 20 Hz - 250 Hz
Low-Level Input Sensitivity: 150 mV - 4 V
High-Level Input Sensitivity: 450 mV - 12 V
Total Harmonic Distortion (THD+Noise): <1.0%
Low-Level Signal Input: 2 RCA
High-Level Input Signal: 4-Pin Molex
Low-Level Signal Output: 2 RCA (Pass-Thru active with RCA or Hi-Level input)
Tone-Controls: 0 to +18 dB @ 45 Hz
Low-Pass Crossover Controls: 50 Hz - 250 Hz @ 12dB/Octave Butterworth
Infrasonic Crossover Controls: 15 Hz - 40 Hz @ 12dB/Octave Butterworth
Dimensions: 1.9"W x 6.8"D x 8.5"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
NEW! Alpine KTA-30MW Mono Power Pack Amp
$499.95
$500.00
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
Alpine KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov