Mackie (369)

Mackie Bundle with CR5-X - 5" Studio Monitor - Pair + ProFX16v3 16-channel Mixer with USB and Effects Mackie CR5-X Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR5-X Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, and a range of inputs are ready to accept signal from your computer, audio interface, or portable device. Whether you're outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you'll be impressed with Mackie CR5-X Multimedia Monitors. Mackie CR5-X Multimedia Monitor System Features: Desktop monitor speakers with 5" drivers Convenient front-panel volume control and headphone output Includes speaker cable, RCA-1/8" cable, and 1/8"-1/8" cable Tech Specs Powered: Yes Power Configuration: Single Amp LF Driver Size: 5" Woofer LF Driver Type: Polypropylene-coated HF Driver Size: 0.75" Tweeter HF Driver Type: Ferrofluid-cooled Silk-dome Total Power: 80W Class AB Frequency Response: 50Hz-20kHz (-10dB) Crossover Frequency: 3.0 kHz Maximum Peak SPL: 105 dB SPL Input Types: 1 x Dual RCA Stereo, 2 x 1/4" TRS, 1 x 1/8" Output Types: 1 x 1/8" (headphones), bare wire connectors +/- (connects pair) Enclosure Type: Rear Ported Enclosure Material: Solid MDF with Black Vinyl wrap Height: 10.2" Width: 6.9" Depth: 9.3" Weight: 14.9 lbs. Mackie ProFX16v3 16-channel Mixer with USB and Effects Looking for a mixer that makes your life easier when you're gigging? The Mackie ProFX16v3 16-channel USB mixer can do that and much, much more. The ProFX16v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with 11 Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. Once you're ready to go, you can use the onboard GigFX to add that little something extra to your mix. No matter if you're onstage or in your studio, the Mackie ProFX16v3 will always give you amazing audio quality. Mackie ProFX16v3 Professional Effects USB Mixer Features: GigFX effects engine delivers 24 effects including reverbs, delays, and choruses 11 Mackie Onyx mic preamps deliver clear signal and 60dB of gain Rugged design will stand up to the wear and tear of the road 3 Band EQ and 100Hz low-cut filter on all channels Built-in channel compression 48-volt phantom power on all mic channels 24-bit/192kHz A/D for unmatched audio quality USB for playback music and recording into your computer Balanced XLR and balanced/unbalanced outputs Headphone output has separate volume control for comfortable monitoring Tech Specs Type: Analog Mixer with USB Interface Channels: 16 (8 x mono, 4 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution: 24-bit/192kHz Faders: 16 x 60mm Faders Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z), 9 x XLR (mic) Phantom Power: Yes Inputs - Line: 6 x 1/4", 6 x 1/4" (3 x stereo), 1 x 1/8" (stereo) Outputs - Main: 2 x XLR, 2 x 1/4" (L/R), 2 x 1/4" (control room) Outputs - Other: 4 x 1/4" (subgroup out) Aux Sends: 1 x FX Send (post), 2 x Monitor Send (pre), 1 x Monitor Send (pre/post) Send/Return I/O: 1 x 1/4" (FX send), 3 x 1/4" (monitor send) Busses/Groups: 2 x Subgroup Inserts: 8 x 1/4" (channel) Headphones: 1 x 1/4" USB: 1 x Type B Other I/O: 1 x 1/4" (footswitch) EQ Bands: 3-band EQ with Variable Mid Frequency (mic channels), 100Hz Low-cut Filter Signal Processing: 8 x Channel Compressors Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Pro Tools First, Waveform OEM DAW, Additional Plug-in packages available Power Source: Standard IEC AC cable Height: 4.4" Width: 17.7" Depth: 17.1" Weight: 15.2 lbs. CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Mackie Bundle with CR4-X - 4" Studio Monitor - Pair + ProFX16v3 16-channel Mixer with USB and Effects Mackie CR4-X Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR4-X Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, and a range of inputs are ready to accept signal from your computer, audio interface, or portable device. Whether you're outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you'll be impressed with Mackie CR4-X Multimedia Monitors. Mackie CR4-X Multimedia Monitor System Features: Desktop monitor speakers with 4" drivers Convenient front-panel volume control and headphone output Includes speaker cable, RCA-1/8" cable, and 1/8"-1/8" cable Tech Specs Powered: Yes Power Configuration: Single Amp LF Driver Size: 4" Woofer LF Driver Type: Polypropylene-coated HF Driver Size: 0.75" Tweeter HF Driver Type: Ferrofluid-cooled Silk-dome Total Power: 50W Class AB Frequency Response: 70Hz-20kHz (-10dB) Crossover Frequency: 3.0 kHz Maximum Peak SPL: 100 dB SPL Input Types: 1 x Dual RCA Stereo, 2 x 1/4" TRS, 1 x 1/8" Output Types: 1 x 1/8" (headphones), bare wire connectors +/- (connects pair) Enclosure Type: Rear Ported Enclosure Material: Solid MDF with Black Vinyl wrap Height: 8.9" Width: 6.1" Depth: 8.3" Weight: 10.1 lbs. Mackie ProFX16v3 16-channel Mixer with USB and Effects Looking for a mixer that makes your life easier when you're gigging? The Mackie ProFX16v3 16-channel USB mixer can do that and much, much more. The ProFX16v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with 11 Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. Once you're ready to go, you can use the onboard GigFX to add that little something extra to your mix. No matter if you're onstage or in your studio, the Mackie ProFX16v3 will always give you amazing audio quality. Mackie ProFX16v3 Professional Effects USB Mixer Features: GigFX effects engine delivers 24 effects including reverbs, delays, and choruses 11 Mackie Onyx mic preamps deliver clear signal and 60dB of gain Rugged design will stand up to the wear and tear of the road 3 Band EQ and 100Hz low-cut filter on all channels Built-in channel compression 48-volt phantom power on all mic channels 24-bit/192kHz A/D for unmatched audio quality USB for playback music and recording into your computer Balanced XLR and balanced/unbalanced outputs Headphone output has separate volume control for comfortable monitoring Tech Specs Type: Analog Mixer with USB Interface Channels: 16 (8 x mono, 4 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution: 24-bit/192kHz Faders: 16 x 60mm Faders Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z), 9 x XLR (mic) Phantom Power: Yes Inputs - Line: 6 x 1/4", 6 x 1/4" (3 x stereo), 1 x 1/8" (stereo) Outputs - Main: 2 x XLR, 2 x 1/4" (L/R), 2 x 1/4" (control room) Outputs - Other: 4 x 1/4" (subgroup out) Aux Sends: 1 x FX Send (post), 2 x Monitor Send (pre), 1 x Monitor Send (pre/post) Send/Return I/O: 1 x 1/4" (FX send), 3 x 1/4" (monitor send) Busses/Groups: 2 x Subgroup Inserts: 8 x 1/4" (channel) Headphones: 1 x 1/4" USB: 1 x Type B Other I/O: 1 x 1/4" (footswitch) EQ Bands: 3-band EQ with Variable Mid Frequency (mic channels), 100Hz Low-cut Filter Signal Processing: 8 x Channel Compressors Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Pro Tools First, Waveform OEM DAW, Additional Plug-in packages available Power Source: Standard IEC AC cable Height: 4.4" Width: 17.7" Depth: 17.1" Weight: 15.2 lbs. CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Mackie Bundle with CR3-XBT - Bluetooth Studio Monitor - Pair + ProFX16v3 16-channel Mixer with USB and Effects Mackie CR3-XBT Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR3-XBT Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, while a range of inputs are ready to accept signal from your computer, audio interface, or portable device. And built-in Bluetooth connectivity means you can even stream audio wirelessly. Whether you're outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you'll be impressed with Mackie CR3-XBT Multimedia Monitors. Mackie CR3-XBT Multimedia Monitor System Features: Desktop monitor speakers with 3" drivers Convenient front-panel volume control and headphone output Includes speaker cable and RCA-1/8" cable Tech Specs Powered: Yes Power Configuration: Single Amp LF Driver Size: 3" Woofer LF Driver Type: Polypropylene-coated HF Driver Size: 0.75" Tweeter HF Driver Type: Ferrofluid-cooled Silk-dome Total Power: 50W Class D Frequency Response: 70Hz-20kHz (-10dB) Crossover Frequency: 3.0 kHz Maximum Peak SPL: 97 dB SPL Input Types: 1 x Dual RCA Stereo, 2 x 1/4" TRS, 1 x 1/8", Bluetooth Output Types: 1 x 1/8" (headphones), bare wire connectors +/- (connects pair) Bluetooth: Yes Enclosure Type: Rear Ported Enclosure Material: Solid MDF with Black Vinyl wrap Height: 8.1" Width: 5.5" Depth: 7.1" Weight: 7.8 lbs. Mackie ProFX16v3 16-channel Mixer with USB and Effects Looking for a mixer that makes your life easier when you're gigging? The Mackie ProFX16v3 16-channel USB mixer can do that and much, much more. The ProFX16v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with 11 Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. Once you're ready to go, you can use the onboard GigFX to add that little something extra to your mix. No matter if you're onstage or in your studio, the Mackie ProFX16v3 will always give you amazing audio quality. Mackie ProFX16v3 Professional Effects USB Mixer Features: GigFX effects engine delivers 24 effects including reverbs, delays, and choruses 11 Mackie Onyx mic preamps deliver clear signal and 60dB of gain Rugged design will stand up to the wear and tear of the road 3 Band EQ and 100Hz low-cut filter on all channels Built-in channel compression 48-volt phantom power on all mic channels 24-bit/192kHz A/D for unmatched audio quality USB for playback music and recording into your computer Balanced XLR and balanced/unbalanced outputs Headphone output has separate volume control for comfortable monitoring Tech Specs Type: Analog Mixer with USB Interface Channels: 16 (8 x mono, 4 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution: 24-bit/192kHz Faders: 16 x 60mm Faders Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z), 9 x XLR (mic) Phantom Power: Yes Inputs - Line: 6 x 1/4", 6 x 1/4" (3 x stereo), 1 x 1/8" (stereo) Outputs - Main: 2 x XLR, 2 x 1/4" (L/R), 2 x 1/4" (control room) Outputs - Other: 4 x 1/4" (subgroup out) Aux Sends: 1 x FX Send (post), 2 x Monitor Send (pre), 1 x Monitor Send (pre/post) Send/Return I/O: 1 x 1/4" (FX send), 3 x 1/4" (monitor send) Busses/Groups: 2 x Subgroup Inserts: 8 x 1/4" (channel) Headphones: 1 x 1/4" USB: 1 x Type B Other I/O: 1 x 1/4" (footswitch) EQ Bands: 3-band EQ with Variable Mid Frequency (mic channels), 100Hz Low-cut Filter Signal Processing: 8 x Channel Compressors Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Pro Tools First, Waveform OEM DAW, Additional Plug-in packages available Power Source: Standard IEC AC cable Height: 4.4" Width: 17.7" Depth: 17.1" Weight: 15.2 lbs. CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Mackie ProFX30v3 Series 30-Channel Professional Effects Mixer with USB Onyx Mic Preamps and GigFX Effects Engine Unpowered Mackie ProFXv3 Series mixers are the ultimate affordable solution for live, home recording, and content creators. Everything you love about the series has been dialed up to 11. Best-in-class sound quality, versatility, and reliability that will have you hugging your mixer regularly. Now, with Onyx mic preamps that offer 60 dB of headroom, 24 built-in FX, and more. Record your tracks in 24-bit/192 kHz quality with 2x4 USB I/O and zero-latency hardware monitoring. Pro Tools First and Waveform OEM recording software/plug-in packages are included. Legendary performance for stage, studio, and beyond – ProFXv3 Series Mixers.Onyx Mic PreampsMic preamps matter a lot, and Mackie's renowned Onyx mic preamps are designed for maximum studio-quality performance. Ultra-low noise and up to 60 dB of gain mean tons of headroom and crystal-clear sound, even with gain-hungry mics.GigFX High-Resolution Effects EngineFX is in the name, so it only makes sense that they got a serious upgrade. Now, with 24 great-sounding effects, you have more options than ever for adding that finished touch to a vocal or kicking up the drama of your podcast.2x4 192 kHz USB RecordingRecording in extreme quality is easy with ProFXv3. Sample rates up to 192 kHz combined with our Onyx mic preamps ensure you get the most pristine sound possible. 2x4 I/O is great for creating two mixes on your computer and sending each to the mixer, with USB 1/2 sent to your headphones/control room and USB 3/4 sent to a channel strip.Pro Tools First and Waveform OEM Software IncludedGreat hardware needs great software. With every ProFXv3 mixer, you get not one but two award-winning DAWs plus massive plug-in bundles.Built-in compressionAn essential tool for both live and studio, a compressor helps smooth out the audio in that channel by keeping louder audio in check while allowing softer sounds to be pulled up. This is especially great for dynamic sources like vocalists, dialogue, drums, etc.Latency-Free Direct MonitoringWhen recording, especially in a studio environment, monitoring in real-time with no delay is crucial. But what about monitoring from your computer so you can hear your mix, plugins, etc.? ProFXv3 makes it easy with a dedicated control to blend between your DAW audio and directly from the channel input.General Features: Designed for maximum versatility, making it perfect for live sound, home recording, content creation, and live streaming Equipped with 2 Onyx mic pres offering up to 60 dB of gain and ultra-low noise performance Perfect for microphones popular with content creators that require high-gain preamps With 24 different FX options, adding some drama to your sound is easy Lay down your tracks in incredible 24-bit/192 kHz quality for the cleanest recordings possible 2x4 USB I/O allows you to create two custom mixes on your computer to send back in the mixer With a single knob, you can blend between monitoring your computers output and a direct feed from the mixer Great for recording overdubs alongside a pre-recorded track 2-band EQ (80 Hz and 12 kHz) on channels 1/2 Hi-Z switches allow direct connection of guitars, basses, and other instruments 100 Hz low-cut filters and 48v phantom power on all mic channels Line inputs on channel 3/4 Stereo 1/8" input on channel 5/6 Headphones output with separate level and blend control Legendary Mackie's “built-like-a-tank" design Solid steel chassis protects your investment Tough ABS side protection Type: Analog Mixer with USB Interface Channels:30 (22 x mono, 4 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution:24-bit/192kHz Faders:30 x 60mm Faders Inputs - Mic Preamps:2 x XLR-1/4" combo (mic/line/Hi-Z), 23 x XLR (mic) Phantom Power: Yes Inputs - Line:20 x 1/4", 6 x 1/4" (3 x stereo), 1 x 1/8" (stereo) Outputs - Main:2 x XLR, 2 x 1/4" (L/R), 2 x 1/4" (control room) Outputs - Other:4 x 1/4" (subgroup out) Aux Sends:1 x FX Send (post), 2 x Monitor Send (pre), 1 x Monitor Send (pre/post) Send/Return I/O:1 x 1/4" (FX send), 3 x 1/4" (monitor send) Busses/Groups:2 x Sub Group Inserts:22 x 1/4" (channel) Headphones:1 x 1/4" USB:1 x Type B Other I/O:1 x 1/4" (footswitch) EQ Bands:3-band EQ with Variable Mid Frequency (mic channels), 100Hz Low-cut Filter Signal Processing:16 x Channel Compressors Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Waveform OEM DAW, FX Plug-in Collection Power Source: Standard IEC AC cable Height:4.4" Width:17.1" Depth:32.3" Weight:26.5 lbs. Manufacturer Part Number:2051304-00 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump 118S 1400W 18" Powered PA Subwoofer The Mackie Thump118S subwoofer brings 1400W of raw wall-shaking power to your system with selectable voicing modes and a variable crossover to simplify optimization. The flagship subwoofer of the Thump Series, the 1400W Thump118S delivers maximum performance for modern DJs, bands, and clubs. An all-new design features selectable voicing modes that make it easy to tailor the bass to your needs and style. Welcome to the world of Thump, where rumble rules and the music doesn't stop till you say so. Before you get the party started, equip your system with a subwoofer that can keep up. Thump118S brings 1400W of raw wall-shaking power to your system with selectable voicing modes and a variable crossover to simplify optimization. Stereo inputs plus High-Pass and Full-Range outputs offer plenty of configuration flexibility, and integrated top-corner handles are our most ergonomic design yet. So grab one (or two, or three)  General Features: 1400W Ultra-Efficient Class-D Amplifier Voicing Modes Optimize Thump118S to Your Needs Variable Crossover and Level Stereo XLR Inputs and Stereo High-Pass + Full-Range Outputs Frequency Response: 30Hz - 200Hz Max SPL: 132 dB Frequency response: 30Hz - 200Hz Max SPL: 132 dB Variable level control (-6dBU to +6dBU) Front LED On/Off Weight: 65.5 lb / 29.71 kg Dimensions: 21.3 x 20.9 x 23.9 in / 541 x 531 x 607 mm (HxWxD) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump12A Powered 12-Inch 1300 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction Delivering proven, chest-thumping low-end in an extremely affordable package; the 1300W Thump12A 12” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump features an all-new amplifier design with Dynamic Bass Response for the chest-thumping low end. Plus, the flexible built-in 2 channel mixer features Vita preamps with Wide-Z technology that handles mic, instrument or line signals with ease. Application-specific speaker modes let you dial in the system at the push of a button. With an all-new professional enclosure and robust system protection, you can walk into your next gig with confidence. General Features: 1,300 watts of high-output power in a portable package Class D amplifier with Dynamic Bass Response yields detailed midrange and abundant bass that are ideal for small venues 12 in. high-output woofer and 1.4 in. titanium dome compression driver Built-in 2-channel mixer features Vita preamps with Wide-Z technology that handle mic, instrument, and line-level signals XLR thru output for wired connection to other Thump speakers Integrated precision crossover and transducer time-alignment deliver outstanding sound quality 4 application-specific speaker modes ensure outstanding sound quality in every situation Robust system protection and thermal limiting keep your system safe Flexible mounting options allow tripod-mounting, pole-mounting, and stage monitor use Compact and lightweight for easy setup and transport Housed in a tough, road-ready enclosure Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Powered: Yes Power Configuration: Bi-amped LF Driver Size:12" woofer HF Driver Size:1.4" HF compression driver LF Driver Power Amp:1000W Class D HF Driver Power Amp:300W Class AB Total Power:1300W Peak Inputs:2 x XLR-1/4" combo Outputs:1 x XLR (mix out) Frequency Range:50Hz-23kHz (-10dB) Crossover Frequency:24 dB/octave @ 2kHz Maximum Peak SPL:126 dB SPL @ 1m Signal Processing:4 x voice modes Enclosure Material: Polypropylene with textured black finish Mounting Options: Pole Mount, Floor Power Source: Standard IEC AC cable Height:24.2" Width:14.1" Depth:14" Weight:29.1 lbs. Manufacturer Part Number:2048070-00 ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie Thump212 Powered 12-Inch 1300 Watt PA DJ Loudspeaker with High-Performance Amplifiers, Built-in Mixers, and Power Factor Correction Delivering proven, chest-thumping low-end in an extremely affordable package, the 1400W Thump212 12” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump features an all-new amplifier design with Dynamic Bass Response for the chest-thumping low end. Plus, the flexible built-in 2-channel mixer features Vita preamps with Wide-Z technology that easily handles mic, instrument, or line signals. Application-specific speaker modes let you dial in the system at the push of a button. With an all-new professional enclosure and robust system protection, you can confidently walk into your next gig. General Features: 1,400 watts of high-output power in a portable package Class D amplifier with Dynamic Bass Response yields detailed midrange and abundant bass that are ideal for small venues 12 in. high-output woofer and 1.4 in. titanium dome compression driver The built-in 2-channel mixer features Vita preamps with Wide-Z technology that handle mic, instrument, and line-level signals XLR thru output for wired connection to other Thump speakers Integrated precision crossover and transducer time-alignment deliver outstanding sound quality 4 application-specific speaker modes ensure outstanding sound quality in every situation Robust system protection and thermal limiting keep your system safe Flexible mounting options allow tripod-mounting, pole-mounting, and stage monitor use Compact and lightweight for easy setup and transport Housed in a tough, road-ready enclosure Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Powered: Yes Power Configuration: Bi-amped LF Driver Size:12" woofer HF Driver Size:1.4" HF compression driver LF Driver Power Amp:1000W Class D HF Driver Power Amp:300W Class AB Total Power:1400W Peak Inputs:2 x XLR-1/4" combo Outputs:1 x XLR (mix out) Frequency Range:50Hz-23kHz (-10dB) Crossover Frequency:24 dB/octave @ 2kHz Maximum Peak SPL:126 dB SPL @ 1m Signal Processing:4 x voice modes Enclosure Material: Polypropylene with textured black finish Mounting Options: Pole Mount, Floor Power Source: Standard IEC AC cable Height:24.2" Width:14.1" Depth:14" Weight:29.1 lbs. Manufacturer Part Number:2048070-00 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie Thump 212 1400 watt 12" 2-way powered portable loudspeaker with High-Performance Amplifiers, Built-in Mixers, and Power Factor Correction Delivering proven, chest-thumping low-end, the 1400W Thump™ and Thump Boosted™ loudspeakers are equipped with built-in mixers and application-specific speaker modes to set you up and sound better and faster than ever. Thump Boosted has advanced features like channel EQ, wireless streaming, and more, all controllable via the Thump Connect™ app. And when you need maximum low end, add the powerful 18” Thump18S powered subwoofer for the ultimate Thump PA system. Building on the powerful, class-leading performance of the Thump Series, Thump Boosted Advanced Powered Loudspeakers offer maximum versatility and flexibility with wireless streaming, control, and linking, plus powerful channel processing and more. STREAMING Pair a Bluetooth® enabled device to your Thump Boosted speaker, and you'll be dancing in no time. SPEAKER LINKING Utilizing the latest technology, we gave Thump Boosted loudspeakers the capability to wirelessly link directly to each other at up to 100 meters for music streaming and control. CHANNEL PROCESSING Each channel is completely digitally controlled, including input levels. Fine-tune your sound with separate 3-band EQ on all three channels plus a variable high-pass filter on the two Vita+™ channels. ULL-COLOR DISPLAY View everything you need at a glance, including channel metering, levels, EQ, and more. Want it off during the performance? No problem. The display can be dimmed and even turned off completely until you need to see it again. General Features: 12 in. high-output woofer and 1.4 in. titanium dome compression driver Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Active/passive: Active Type: 2-way LF driver: 15 in. MF driver: Not applicable HF driver: 1.4 in. titanium Amplifier class: D Wattage: 650W RMS/1300 peak Mixer/preamp: Yes Frequency response: 32Hz - 23kHz Coverage pattern: 90° x 60° Max SPL: 125 dB XLR: 1 Input TRS: 1 Input XLR: Thru (M) Outputs Cabinet material: Molded Width: 14.5 in. Height: 23.5 in. Depth: 12.4 in. Weight: 29 lbs. / 13.2 kg ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump212 Powered 12-Inch 1400 Watt PA DJ Loudspeaker with High-Performance Amplifiers, Built-in Mixers, and Power Factor Correction Delivering proven, chest-thumping low-end in an extremely affordable package, the 1300W Thump12A 12” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump features an all-new amplifier design with Dynamic Bass Response for the chest-thumping low end. Plus, the flexible built-in 2-channel mixer features Vita preamps with Wide-Z technology that easily handles mic, instrument, or line signals. Application-specific speaker modes let you dial in the system at the push of a button. With an all-new professional enclosure and robust system protection, you can confidently walk into your next gig. General Features: 1,300 watts of high-output power in a portable package Class D amplifier with Dynamic Bass Response yields detailed midrange and abundant bass that are ideal for small venues 12 in. high-output woofer and 1.4 in. titanium dome compression driver Built-in 2-channel mixer features Vita preamps with Wide-Z technology that handle mic, instrument, and line-level signals XLR thru output for wired connection to other Thump speakers Integrated precision crossover and transducer time-alignment deliver outstanding sound quality 4 application-specific speaker modes ensure outstanding sound quality in every situation Robust system protection and thermal limiting keep your system safe Flexible mounting options allow tripod-mounting, pole-mounting, and stage monitor use Compact and lightweight for easy setup and transport Housed in a tough, road-ready enclosure Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Powered: Yes Power Configuration: Bi-amped LF Driver Size:12" woofer HF Driver Size:1.4" HF compression driver LF Driver Power Amp:1000W Class D HF Driver Power Amp:300W Class AB Total Power:1300W Peak Inputs:2 x XLR-1/4" combo Outputs:1 x XLR (mix out) Frequency Range:50Hz-23kHz (-10dB) Crossover Frequency:24 dB/octave @ 2kHz Maximum Peak SPL:126 dB SPL @ 1m Signal Processing:4 x voice modes Enclosure Material: Polypropylene with textured black finish Mounting Options: Pole Mount, Floor Power Source: Standard IEC AC cable Height:24.2" Width:14.1" Depth:14" Weight:29.1 lbs. Manufacturer Part Number:2048070-00 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump212 Powered 12-Inch 1400 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction with MR DJ Speaker Stand 6 Feet XLR Cable Delivering proven, chest-thumping low-end in an extremely affordable package; the 1400W Thump212 12” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump features an all-new amplifier design with Dynamic Bass Response for the chest-thumping low end. Plus, the flexible built-in 2-channel mixer features Vita preamps with Wide-Z technology that easily handles mic, instrument, or line signals. Application-specific speaker modes let you dial in the system at the push of a button. With an all-new professional enclosure and robust system protection, you can confidently walk into your next gig. General Features: 1,400 watts of high-output power in a portable package Class D amplifier with Dynamic Bass Response yields detailed midrange and abundant bass that are ideal for small venues 12 in. high-output woofer and 1.4 in. titanium dome compression driver The built-in 2-channel mixer features Vita preamps with Wide-Z technology that handle mic, instrument, and line-level signals XLR thru output for wired connection to other Thump speakers Integrated precision crossover and transducer time-alignment deliver outstanding sound quality Four application-specific speaker modes ensure outstanding sound quality in every situation Robust system protection and thermal limiting keep your system safe Flexible mounting options allow tripod-mounting, pole-mounting, and stage monitor use Compact and lightweight for easy setup and transport Housed in a tough, road-ready enclosure Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Powered: Yes Power Configuration: Bi-amped LF Driver Size:12" woofer HF Driver Size:1.4" HF compression driver LF Driver Power Amp:1000W Class D HF Driver Power Amp:300W Class AB Total Power:1400W Peak Inputs:2 x XLR-1/4" combo Outputs:1 x XLR (mix out) Frequency Range:50Hz-23kHz (-10dB) Crossover Frequency:24 dB/octave @ 2kHz Maximum Peak SPL:126 dB SPL @ 1m Signal Processing:4 x voice modes Enclosure Material: Polypropylene with textured black finish Mounting Options: Pole Mount, Floor Power Source: Standard IEC AC cable Height:24.2" Width:14.1" Depth:14" Weight:29.1 lbs. Manufacturer Part Number:2048070-00 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Mackie Thump12A Powered 12-Inch 1300 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction with MR DJ Speaker Stands & Bag, Wired Mic, 6 Feet XLR Cable Delivering proven, chest-thumping low-end, the 1400W Thump™ and Thump Boosted™ loudspeakers are equipped with built-in mixers and application-specific speaker modes to set you up and sound better and faster than ever. Thump Boosted has advanced features like channel EQ, wireless streaming, and more, all controllable via the Thump Connect™ app. And when you need maximum low end, add the powerful 18” Thump18S powered subwoofer for the ultimate Thump PA system. Building on the powerful, class-leading performance of the Thump Series, Thump Boosted Advanced Powered Loudspeakers offer maximum versatility and flexibility with wireless streaming, control, and linking, plus powerful channel processing and more. STREAMING Pair a Bluetooth® enabled device to your Thump Boosted speaker, and you'll be dancing in no time. SPEAKER LINKING Utilizing the latest technology, we gave Thump Boosted loudspeakers the capability to wirelessly link directly to each other at up to 100 meters for music streaming and control. CHANNEL PROCESSING Each channel is completely digitally controlled, including input levels. Fine-tune your sound with separate 3-band EQ on all three channels plus a variable high-pass filter on the two Vita+™ channels. ULL-COLOR DISPLAY View everything you need at a glance, including channel metering, levels, EQ, and more. Want it off during the performance? No problem. The display can be dimmed and even turned off completely until you need to see it again. General Features: 12 in. high-output woofer and 1.4 in. titanium dome compression driver Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Active/passive: Active Type: 2-way LF driver: 15 in. MF driver: Not applicable HF driver: 1.4 in. titanium Amplifier class: D Wattage: 650W RMS/1300 peak Mixer/preamp: Yes Frequency response: 32Hz - 23kHz Coverage pattern: 90° x 60° Max SPL: 125 dB XLR: 1 Input TRS: 1 Input XLR: Thru (M) Outputs Cabinet material: Molded Width: 14.5 in. Height: 23.5 in. Depth: 12.4 in. Weight: 29 lbs. / 13.2 kg ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump12A Powered 12-Inch 1300 Watt PA DJ Loudspeaker with High-Performance Amplifiers Built-in Mixers and Power Factor Correction + MR DJ LED Crystal Magic Ball Delivering proven, chest-thumping low-end in an extremely affordable package, the 1300W Thump12A 12” Powered Loudspeaker has been redesigned from the ground up to sound better than ever. Thump features an all-new amplifier design with Dynamic Bass Response for the chest-thumping low end. Plus, the flexible built-in 2-channel mixer features Vita preamps with Wide-Z technology that easily handles mic, instrument, or line signals. Application-specific speaker modes let you dial in the system at the push of a button. With an all-new professional enclosure and robust system protection, you can confidently walk into your next gig. General Features: 1,300 watts of high-output power in a portable package Class D amplifier with Dynamic Bass Response yields detailed midrange and abundant bass that are ideal for small venues 12 in. high-output woofer and 1.4 in. titanium dome compression driver The built-in 2-channel mixer features Vita preamps with Wide-Z technology that handle mic, instrument, and line-level signals XLR thru output for wired connection to other Thump speakers Integrated precision crossover and transducer time-alignment deliver outstanding sound quality Four application-specific speaker modes ensure outstanding sound quality in every situation Robust system protection and thermal limiting keep your system safe Flexible mounting options allow tripod-mounting, pole-mounting, and stage monitor use Compact and lightweight for easy setup and transport Housed in a tough, road-ready enclosure Efficient Class D amplification System protection/limiting keeps your system safe 3-channel, digitally controllable mixer Powerful DSP for the best sound and performance Lightweight professional enclosure designed for heavy use Powered: Yes Power Configuration: Bi-amped LF Driver Size:12" woofer HF Driver Size:1.4" HF compression driver LF Driver Power Amp:1000W Class D HF Driver Power Amp:300W Class AB Total Power:1300W Peak Inputs:2 x XLR-1/4" combo Outputs:1 x XLR (mix out) Frequency Range:50Hz-23kHz (-10dB) Crossover Frequency:24 dB/octave @ 2kHz Maximum Peak SPL:126 dB SPL @ 1m Signal Processing:4 x voice modes Enclosure Material: Polypropylene with textured black finish Mounting Options: Pole Mount, Floor Power Source: Standard IEC AC cable Height:24.2" Width:14.1" Depth:14" Weight:29.1 lbs. Manufacturer Part Number:2048070-00 ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.