Mackie (369)

Mackie SRM215 V-Class SRM V-Class Series, 15-Inch 2000W High-Performance Loudspeaker, Powered-BlackThe loudest, best sounding, and most advanced loudspeakers in their classSRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.Robust 2000W amplifiers with our Advanced Impulse DSP tuning and Intelligent Bass Management deliver a consistent listening experience to your whole audience even at extreme volumes. A built-in digital mixer with a full-color display features Bluetooth streaming and powerful processing plus complete wireless control via the SRM Connect app.TRANSPARENT SYSTEM PROTECTIONMackie SRM | V-Class System ProtectionOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.General Features: Industry-leading 2000W Class-D amplifier Advanced impulse DSP proprietary acoustic tuning Intelligent bass management Custom SYM-X horn High-performance custom transducers Transparent system limiting and protection SRM Mix control built-in channel digital mixer with Bluetooth Complete wireless control via the SRM connect App Versatile configuration options Best performance, sound quality, and reliability in its class Industry-leading 2000W Class-D amplifier with transparent system limiting and protection Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™ High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth® Complete wireless control via the SRM Connect™ app Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control Dual-angle pole mount plus angled design for use as a floor monitor Max SPL: 136dB Frequency response: 40Hz-20Hz Coverage: 60°(H)x40°(V) Weight: 48.9 lb / 22.2 kg Dimensions: 28.8 x 15.4 x 17.6 in / 732 x 391 x 447 mm ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie SRM212 V-Class SRM V-Class Series, 15-Inch 2000W High-Performance Loudspeaker, Powered-BlackThe loudest, best sounding, and most advanced loudspeakers in their classSRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.Robust 2000W amplifiers with our Advanced Impulse DSP tuning and Intelligent Bass Management deliver a consistent listening experience to your whole audience even at extreme volumes. A built-in digital mixer with a full-color display features Bluetooth streaming and powerful processing plus complete wireless control via the SRM Connect app.TRANSPARENT SYSTEM PROTECTIONMackie SRM | V-Class System ProtectionOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.General Features: Industry-leading 2000W Class-D amplifier Advanced impulse DSP proprietary acoustic tuning Intelligent bass management Custom SYM-X horn High-performance custom transducers Transparent system limiting and protection SRM Mix control built-in channel digital mixer with Bluetooth Complete wireless control via the SRM connect App Versatile configuration options Best performance, sound quality, and reliability in its class Industry-leading 2000W Class-D amplifier with transparent system limiting and protection Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™ High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth® Complete wireless control via the SRM Connect™ app Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control Dual-angle pole mount plus angled design for use as a floor monitor Max SPL: 136dB Frequency response: 40Hz-20Hz Coverage: 60°(H)x40°(V) Weight: 40.6 lb / 18.4 kg Dimensions: 25.9 x 14.2 x 15.2 in / 658 x 361 x 386 mm ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie SRM212 V-Class SRM V-Class Series, 12-Inch 2000W High-Performance Loudspeaker, Powered-BlackThe loudest, best sounding, and most advanced loudspeakers in their classSRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.Robust 2000W amplifiers with our Advanced Impulse DSP tuning and Intelligent Bass Management deliver a consistent listening experience to your whole audience even at extreme volumes. A built-in digital mixer with a full-color display features Bluetooth streaming and powerful processing plus complete wireless control via the SRM Connect app.TRANSPARENT SYSTEM PROTECTIONMackie SRM | V-Class System ProtectionOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.General Features: Industry-leading 2000W Class-D amplifier Advanced impulse DSP proprietary acoustic tuning Intelligent bass management Custom SYM-X horn High-performance custom transducers Transparent system limiting and protection SRM Mix control built-in channel digital mixer with Bluetooth Complete wireless control via the SRM connect App Versatile configuration options Best performance, sound quality, and reliability in its class Industry-leading 2000W Class-D amplifier with transparent system limiting and protection Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™ High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth® Complete wireless control via the SRM Connect™ app Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control Dual-angle pole mount plus angled design for use as a floor monitor Max SPL: 136dB Frequency response: 40Hz-20Hz Coverage: 60°(H)x40°(V) Weight: 40.6 lb / 18.4 kg Dimensions: 25.9 x 14.2 x 15.2 in / 658 x 361 x 386 mm ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie SRM210 V-Class SRM V-Class Series, 10-Inch 2000W High-Performance Loudspeaker, Powered-BlackThe loudest, best sounding, and most advanced loudspeakers in their classSRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.Robust 2000W amplifiers with our Advanced Impulse DSP tuning and Intelligent Bass Management deliver a consistent listening experience to your whole audience even at extreme volumes. A built-in digital mixer with a full-color display features Bluetooth streaming and powerful processing plus complete wireless control via the SRM Connect app.TRANSPARENT SYSTEM PROTECTIONMackie SRM | V-Class System ProtectionOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.General Features: Industry-leading 2000W Class-D amplifier Advanced impulse DSP proprietary acoustic tuning Intelligent bass management Custom SYM-X horn High-performance custom transducers Transparent system limiting and protection SRM Mix control built-in channel digital mixer with Bluetooth Complete wireless control via the SRM connect App Versatile configuration options Best performance, sound quality, and reliability in its class Industry-leading 2000W Class-D amplifier with transparent system limiting and protection Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™ High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth® Complete wireless control via the SRM Connect™ app Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control Dual-angle pole mount plus angled design for use as a floor monitor Max SPL: 136dB Frequency response: 40Hz-20Hz Coverage: 60°(H)x40°(V) Weight: 30.9 lb / 14 kg Dimensions: 23 x 12.9 x 15.1 in / 584 x 328 x 384 mm ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie SRM210 V-Class SRM V-Class Series, 10-Inch 2000W High-Performance Loudspeaker, Powered-BlackThe loudest, best sounding, and most advanced loudspeakers in their classSRM | V-Class High-Performance Powered Loudspeakers are a whole new tier of SRM portable loudspeakers that aren’t just made to get the job done, but to get it done better than anything else with unmatched clarity, output, and control packaged into sleek, rugged enclosures.Robust 2000W amplifiers with our Advanced Impulse DSP tuning and Intelligent Bass Management deliver a consistent listening experience to your whole audience even at extreme volumes. A built-in digital mixer with a full-color display features Bluetooth streaming and powerful processing plus complete wireless control via the SRM Connect app.TRANSPARENT SYSTEM PROTECTIONMackie SRM | V-Class System ProtectionOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.General Features: Industry-leading 2000W Class-D amplifier Advanced impulse DSP proprietary acoustic tuning Intelligent bass management Custom SYM-X horn High-performance custom transducers Transparent system limiting and protection SRM Mix control built-in channel digital mixer with Bluetooth Complete wireless control via the SRM connect App Versatile configuration options Best performance, sound quality, and reliability in its class Industry-leading 2000W Class-D amplifier with transparent system limiting and protection Superior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™ High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracy SRM Mix Control™ built-in 4-channel digital mixer with Bluetooth® Complete wireless control via the SRM Connect™ app Wirelessly link 2 SRM | V-Class speakers together for music streaming applications plus control Dual-angle pole mount plus angled design for use as a floor monitor Max SPL: 136dB Frequency response: 40Hz-20Hz Coverage: 60°(H)x40°(V) Weight: 30.9 lb / 14 kg Dimensions: 23 x 12.9 x 15.1 in / 584 x 328 x 384 mm ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Mackie Thump GO 200 watt 8" Portable Battery-Powered Rechargeable DJ PA Bluetooth Speaker Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Simply pair a Bluetooth® enabled device to your Thump Go speaker and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in ultra-portable design with a removable battery pack so you can sound your best anywhere for up 12 hours on a Single Charge BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and really get your sound dialed in just right or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble 4 application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

2 Mackie Thump GO 200-watt 8" 2-way Battery-powered portable loudspeaker Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 2-Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker+Speaker Stand Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Simply pair a Bluetooth® enabled device to your Thump Go speaker and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in ultra-portable design with a removable battery pack so you can sound your best anywhere for up 12 hours on a Single Charge BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and really get your sound dialed in just right or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumble 4 application-specific speaker modes Music Ducking mode automatically lowers Ch.2 level when Ch.1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 MR DJ SS350B Speaker Stand Universal Black Heavy Duty Folding Tripod PRO PA DJ Home On Stage Speaker Stand Mount Holder The adjustable height speaker stand is heavy-duty for any time of use and lightweight. The height adjustment gives you the ability to use the stand at several height points, making it usable at any type of venue. This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It is sturdy steel construction and custom carrying case add to the quality and support this stand gives. General Features: Universal Heavy-Duty Tripod Speaker Light Stands Works with All Speakers with 35mm Compatible Insert Loudspeakers, PA Speakers, Stage/Studio Monitors, etc. Foldable legs for portability and easy storage Lightweight design for easy move and carry Safety Pin for maximum strength and security Constructed by metal construction to ensure long time use Center brace connects tripod legs design for increased stability Solid and stable to support up to 80lbs for each speaker stand Legs with the same length make the base extremely stable and safe Ideal for concerts, parties, speech, film shows, band practice and so on Non-slip feet for traction on surfaces greatly improve the stability Lightweight Steel material Rugged and Durable Heavy-Duty Steel Construction Adjustable Height Range: 37.5-78.75 inches Load Capacity 80lbs Maximum Height 78.75" Heavy Duty and Portable 80lbs weight capacity handles most portable PA speakers Accommodates both 1-3/8" and 1-1/2" speaker sockets Folding size: 4.7"x4.7"x37.5"(LXWXH) The diameter of top pipe: φ35mm The diameter of the main iron pipe: φ38mm The diameter of each foot pipe: φ35mm Base Spread: 0-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.38 inches Tripod base Safe telescoping collar with a safety pin for maximum strength and security Color: Black Material: Iron + PP CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

 2 Mackie Thump GO 200 watt 8" 2-way Battery-powered portable loudspeaker & MR DJ Speaker Stand Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug and you are good to go. Pull up the Thump Connect 2 app and really get your sound dialed in just right or even stream some backing tracks from your phone General Features: 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers the Ch.2 level when Ch.1 receives a signal. Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 (2) MR DJ SS350B Speaker Stand Universal Black Heavy Duty Folding Tripod PRO PA DJ Home On Stage Speaker Stand Mount Holder The adjustable height speaker stand is heavy-duty for any time of use and lightweight. The height adjustment allows you to use the stand at several height points, making it usable at any venue. This heavy-duty universal stand can be used as a Speaker or Lighting Stand! Sturdy steel construction and custom carrying case add to this stand's quality and support. General Features: Universal Heavy-Duty Tripod Speaker Light Stands Works with All Speakers with 35mm Compatible Insert Loudspeakers, PA Speakers, Stage/Studio Monitors, etc. Foldable legs for portability and easy storage Lightweight design for easy move and carry Safety Pin for maximum strength and security Constructed by metal construction to ensure long time use The Center brace connects the tripod legs design for increased stability Solid and stable to support up to 80lbs for each speaker stand Legs with the same length make the base extremely stable and safe Ideal for concerts, parties, speeches, film shows, band practice, and so on Non-slip feet for traction on surfaces greatly improve the stability Lightweight Steel material Rugged and Durable Heavy-Duty Steel Construction Adjustable Height Range: 37.5-78.75 inches Load Capacity 80lbs Maximum Height 78.75" Heavy Duty and Portable 80lbs weight capacity handles most portable PA speakers Accommodates both 1-3/8" and 1-1/2" speaker sockets Folding size: 4.7"x4.7"x37.5"(LXWXH) The diameter of top pipe: is φ35mm The diameter of the main iron pipe: is φ38mm The diameter of each foot pipe: φ35mm Base Spread: 0-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.38 inches Tripod base Safe telescoping collar with a safety pin for maximum strength and security Color: Black Material: Iron  Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie 802VLZ4, 8-channel Ultra Compact Mixer with High-Quality Onyx Preamps A legend in compact mixer design, performance, and durability, Mackie VLZ is the original no-nonsense mixer series. Offering more bang for your buck, the redesigned VLZ4 line now includes Mackie's industry-proven Onyx preamps for crystal-clear sonic clarity. The comprehensive VLZ4 line delivers the proven feature set, high-headroom/low-noise design, and "Built-Like-A-Tank" construction that created an industry more than 20 years ago. From every input to every output, VLZ4 is optimized to deliver professional-quality results each and every time. Maximum Usability The new VLZ4's feature a sleek black powder coat finish and cockpit-inspired controls. Colorful high-contrast knobs optimize the VLZ4's usability in low-light scenarios as well as feature a radical, ergonomic taper that provides all the tactile control you need all while keeping the mixer footprint as small as possible. Built Like A Tank Mackie VLZ4 mixers are truly "Built Like A Tank." Show to show the VLZ4 is made to keep on working no matter what gets thrown at it. Features like a nearly indestructible steel wrap-around chassis and grime-resistant rotary sealed pots make the Mackie VLZ4 mixer a solid investment. Mackie 802VLZ4 8-channel Mixer Features: Amazingly rugged analog mixer with three microphone preamplifiers and three stereo channels Onyx mic preamps offer up to 60dB of gain for great performance with any mic Ultra-low-noise performance gives you clean, clear sound High-resolution stereo meters give you a fast, easy visual indication of your signal levels Sealed rotary controls resist dust and grime Type: Analog Channels: 8 Inputs - Mic Preamps: 3 x XLR Phantom Power: 3 Inputs - Line: 2 x 1/4" (CH 1-2), 6 x 1/4" (CH 3-8 Stereo), 2 x RCA (Tape) Inputs - Other: 2 x Stereo (RCA) Outputs - Main: 2 x XLR, 2 x 1/4" Outputs - Other: 2 x RCA (Tape), 2 x 1/4" (Alt), 2 x 1/4" (Control Room) Aux Sends: 1 x Pre/Post Send/Return I/O: 1 x 1/4" (Send), 2 x 1/4" (Return) Busses/Groups: Alt 3-4 Channel Inserts: Yes (CH 1-2) Headphones: 1 x 1/4" EQ Bands: 3-band Height: 1.8" Width: 8.9" Depth: 10.7" Weight: 5.5 lbs. Manufacturer Part Number: 2040767-00 ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

  Mackie Bundle with CR4-XBT - Bluetooth Studio Monitor - Pair + ProFX16v3 16-channel Mixer with USB and Effects Mackie CR4-XBT 4-inch Creative Reference Multimedia Studio Monitors with Bluetooth Bundle  CR Series Creative Reference Multimedia Monitors offer studio-quality sound with cosmetics that complement any desk whether you’re making music, creating content, or just relaxing to your favorite tunes. The sleek design of CR-X features a brushed metal panel and a distinct outline that stands out. Available in a vast range of sizes from 3” to 8” with a Bluetooth option plus an 8” subwoofer with Bluetooth, CR-X is the perfect match for your needs. Upgrade your listening experience with Mackie CR-X Creative Reference Multimedia Monitors. General Features: stream music from a smartphone or any other Bluetooth-enabled device Desktop monitor speakers with 4" drivers Convenient front-panel volume control and headphone output 4" Polypropylene-Coated Woofer HF Driver Size: 0.75" Tweeter Total Power: 50W Class AB All-Wood Cabinet Custom-Tuned Rear Port Specially Designed Waveguide Front-Panel Stereo Headphone Output Includes speaker cable, RCA-1/8" cable, and 1/8"-1/8" cable Power Configuration: Single Amp LF Driver Size: 4" Woofer LF Driver Type: Polypropylene-coated HF Driver Size:0.75" Tweeter HF Driver Type: Ferrofluid-cooled Silk-dome Frequency Response:70Hz-20kHz (-10dB) Crossover Frequency:3.0 kHz Maximum Peak SPL:100 dB SPL Input Types:1 x Dual RCA Stereo, 2 x 1/4" TRS, 1 x 1/8" Output Types: 1 x 1/8" (headphones), bare wire connectors +/- (connects pair) Enclosure Type: Rear Ported Enclosure Material: Solid MDF with Black Vinyl wrap Height:8.9" Width:6.1" Depth:8.3" Weight:10.1 lbs. Mackie ProFX16v3 16-channel Mixer with USB and Effects Looking for a mixer that makes your life easier when you're gigging? The Mackie ProFX16v3 16-channel USB mixer can do that and much, much more. The ProFX16v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with 11 Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. Once you're ready to go, you can use the onboard GigFX to add that little something extra to your mix. No matter if you're onstage or in your studio, the Mackie ProFX16v3 will always give you amazing audio quality.   General Features: GigFX effects engine delivers 24 effects including reverbs, delays, and choruses 11 Mackie Onyx mic preamps deliver a clear signal and 60dB of gain Rugged design will stand up to the wear and tear of the road 3 Band EQ and 100Hz low-cut filter on all channels Built-in channel compression 48-volt phantom power on all mic channels 24-bit/192kHz A/D for unmatched audio quality USB for playback music and recording into your computer Balanced XLR and balanced/unbalanced outputs The headphone output has a separate volume control for comfortable monitoring Type: Analog Mixer with USB Interface Channels: 16 (8 x mono, 4 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution: 24-bit/192kHz Faders: 16 x 60mm Faders Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z), 9 x XLR (mic) Phantom Power: Yes Inputs - Line: 6 x 1/4", 6 x 1/4" (3 x stereo), 1 x 1/8" (stereo) Outputs - Main: 2 x XLR, 2 x 1/4" (L/R), 2 x 1/4" (control room) Outputs - Other: 4 x 1/4" (subgroup out) Aux Sends: 1 x FX Send (post), 2 x Monitor Send (pre), 1 x Monitor Send (pre/post) Send/Return I/O: 1 x 1/4" (FX send), 3 x 1/4" (monitor send) Busses/Groups: 2 x Subgroup Inserts: 8 x 1/4" (channel) Headphones: 1 x 1/4" USB: 1 x Type B Other I/O: 1 x 1/4" (footswitch) EQ Bands: 3-band EQ with Variable Mid Frequency (mic channels), 100Hz Low-cut Filter Signal Processing: 8 x Channel Compressors Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Pro Tools First, Waveform OEM DAW, Additional Plug-in packages available Power Source: Standard IEC AC cable Height: 4.4" Width: 17.7" Depth: 17.1" Weight: 15.2 lbs. ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Bundle with CR5-XBT - Bluetooth Studio Monitor - Pair + ProFX16v3 16-channel Mixer with USB and Effects Mackie CR5-XBT Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR5-XBT Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, while a range of inputs are ready to accept signal from your computer, audio interface, or portable device. And built-in Bluetooth connectivity means you can even stream audio wirelessly. Whether you're outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you'll be impressed with Mackie CR5-XBT Multimedia Monitors. Mackie CR5-XBT Multimedia Monitor System Features: Desktop monitor speakers with 5" drivers Convenient front-panel volume control and headphone output Includes speaker cable and RCA-1/8" cable Tech Specs Powered: Yes Power Configuration: Single Amp LF Driver Size: 5" Woofer LF Driver Type: Polypropylene-coated HF Driver Size: 0.75" Tweeter HF Driver Type: Ferrofluid-cooled Silk-dome Total Power: 80W Class D Frequency Response: 50Hz-20kHz (-10dB Crossover Frequency: 3.0 kHz Maximum Peak SPL: 105 dB SPL Input Types: 1 x Dual RCA Stereo, 2 x 1/4", 1 x 1/8", Bluetooth Output Types: 1 x 1/8" (headphones), bare wire connectors +/- (connects pair) Bluetooth: Yes Enclosure Type: Rear Ported Enclosure Material: Solid MDF with Black Vinyl wrap Height: 10.2" Width: 6.9" Depth: 9.3" Weight: 14.9 lbs. Mackie ProFX16v3 16-channel Mixer with USB and Effects Looking for a mixer that makes your life easier when you're gigging? The Mackie ProFX16v3 16-channel USB mixer can do that and much, much more. The ProFX16v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with 11 Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. Once you're ready to go, you can use the onboard GigFX to add that little something extra to your mix. No matter if you're onstage or in your studio, the Mackie ProFX16v3 will always give you amazing audio quality. Mackie ProFX16v3 Professional Effects USB Mixer Features: GigFX effects engine delivers 24 effects including reverbs, delays, and choruses 11 Mackie Onyx mic preamps deliver clear signal and 60dB of gain Rugged design will stand up to the wear and tear of the road 3 Band EQ and 100Hz low-cut filter on all channels Built-in channel compression 48-volt phantom power on all mic channels 24-bit/192kHz A/D for unmatched audio quality USB for playback music and recording into your computer Balanced XLR and balanced/unbalanced outputs Headphone output has separate volume control for comfortable monitoring Tech Specs Type: Analog Mixer with USB Interface Channels: 16 (8 x mono, 4 x stereo) Computer Connectivity: USB (2 x 4) A/D Resolution: 24-bit/192kHz Faders: 16 x 60mm Faders Inputs - Mic Preamps: 2 x XLR-1/4" combo (mic/line/Hi-Z), 9 x XLR (mic) Phantom Power: Yes Inputs - Line: 6 x 1/4", 6 x 1/4" (3 x stereo), 1 x 1/8" (stereo) Outputs - Main: 2 x XLR, 2 x 1/4" (L/R), 2 x 1/4" (control room) Outputs - Other: 4 x 1/4" (subgroup out) Aux Sends: 1 x FX Send (post), 2 x Monitor Send (pre), 1 x Monitor Send (pre/post) Send/Return I/O: 1 x 1/4" (FX send), 3 x 1/4" (monitor send) Busses/Groups: 2 x Subgroup Inserts: 8 x 1/4" (channel) Headphones: 1 x 1/4" USB: 1 x Type B Other I/O: 1 x 1/4" (footswitch) EQ Bands: 3-band EQ with Variable Mid Frequency (mic channels), 100Hz Low-cut Filter Signal Processing: 8 x Channel Compressors Effects: GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah Software: Pro Tools First, Waveform OEM DAW, Additional Plug-in packages available Power Source: Standard IEC AC cable Height: 4.4" Width: 17.7" Depth: 17.1" Weight: 15.2 lbs. CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.