Hot Deals | Absolute Pro Music – Page 390

Peavey PVi 10 Passive Two-Way PA Speaker - Pair $199.99 $289.59

Peavey PVi10 Two 10" 100 Watt 2-Way Pro Audio Live Speaker System (Pair) The PVi 10 is a two-way speaker system featuring a 10" woofer and a high-frequency drive on an exponential horn. The lightweight yet rugged, carpet-covered trapezoidal enclosure with top handle is ideal for live music, speech, and music playback applications. A full-length, black powder-coated steel grille provides driver protection and a professional appearance. The PVi 10 speaker system is rated at 50 watts of program power handling. Its smooth response makes this system ideal for smaller venues where space is at a premium, and its two 1/4" input connectors keep amplifier hookup simple. General Features: Control-mount adaptor Side-position monitor 50 watts continuous, 100 watts program Two-way enclosure Horn-loaded high-frequency driver 10" premium speaker Metal grille Carpet covered Weight Unpacked: 37.04 lb(16.8 kg) Weight Packed: 40.12 lb(18.2 kg) Width Packed: 20"(50.8 cm) Height Packed: 28.25"(71.755 cm) Depth Packed: 10.25"(26.035 cm) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-17% sale

Peavey PVI 2 Cardioid Unidirectional Dynamic Vocal Microphone with XLR Cable

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVI 2 Cardioid Unidirectional Dynamic Vocal Microphone with XLR Cable $49.99 $59.99

Peavey PVI 2 Cardioid Unidirectional Dynamic Vocal Microphone with XLR Cable The Peavey PVi2 Dynamic Microphone delivers astonishingly high-quality, clean, natural sound. It is a cardioid unidirectional dynamic mic with an on/off switch, a rugged, die-cast steel case, low pop and handling noise, and a low-gloss black finish. Peavey includes an XLR cable with your PVi2 mic. General Features: On/off switch in the handle Cardioid unidirectional polar response Low pop and handling noise Rugged, die-cast steel case with protective rubberized windscreen ring 20 ft. XLR cable included Width Packed: 7.75"(19.685 cm) Height Packed: 11"(27.94 cm) Depth Packed: 3"(7.62 cm) Weight Unpacked: 1.63 lb(0.739 kg) Weight Packed: 1.90 lb(0.862 kg) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-38% sale

Peavey PVi 6500 6-channel 400W All in One Powered Mixer Amplifier with Bluetooth

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVi 6500 6-channel 400W All in One Powered Mixer Amplifier with Bluetooth $499.99 $799.99

Peavey PVi 6500 6-channel 400W Powered Mixer Amplifier with Bluetooth, 6 Inputs, Built-in FX, 9-band Graphic EQ, Aux Audio Input, and SD Card/USB Audio Playback The Peavey PVi 6500 is a revolutionary all-in-one powered mixer. It provides everything a musician needs, including up to six simultaneous combinations of XLR and 1/4" inputs. It uses Peavey's award-winning Silencer mic preamps and 400 watts of power for crystal-clear audio reproduction. The Peavey PVi 6500 also uses exclusive features like Mid Morph EQ to help accurately improve the tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's 9-band graphic EQ, combined with our revolutionary FLS Feedback Locating System. The PVi 6500 is equipped with Kosmos, drastically enhancing the audio spectrum's low and high ends. It is exclusively Peavey technology. Footswitchable built-in 24-bit digital effects complement the already feature-packed unit by allowing users to select multiple varieties of reverb and delay. The onboard 1/4", RCA, and 1/8" mini jacks connect almost anything to this versatile mixer. General Features: FLS Feedback Locating System Footswitchable effects defeat Combination XLR and 1/4" input jacks RCA, 1/8" media input Selectable 9-band graphic EQ with FLS Selectable Main or Monitor dual power section RCA Record outputs Onboard 24-bit digital effects with a mute button Clip light and signal present indicator Main line level 1/4" output Speaker protection circuit 48-volt phantom power Bluetooth streaming audio Width Packed: 14"(35.56 cm) Height Packed: 19.75"(50.165 cm) Depth Packed: 13"(33.02 cm) Weight Unpacked: 20.02 lb(9.08 kg) Weight Packed: 22.29 lb(10.11 kg) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -2% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PV-MSP1 XLR Dynamic Cardioid Microphone Stand Package with Accessories $89.99 $90.98

The Peavey PV-MSP1 XLR Dynamic Cardioid Microphone with Accessories package designed for working musicians on the move. The package includes essential accessories for stage and rehearsal setups, all in a protective gig bag. The PV MSP1 features Peavey's performance-ready PVi 100 dynamic cardioid microphones, which can be switched off when not in use, as well as a fully adjustable, tripod-style boom stand that works equally well with vocals, acoustic guitars, amplifiers, drums or any other instruments. The package also includes an XLR-to-XLR or XLR-to-1/4" cable; a mic stand clip; and a protective nylon mic bag. A durable, zippered gig bag allows users to transport their entire microphone setups from rehearsal to the stage. Product Specifications: Weight Unpacked: 6.61 lb (3 kg) Weight Packed: 7.05 lb (3.2 kg) Width Packed: 5"(12.7 cm) Height Packed: 35.75"(90.805 cm) Depth Packed: 4"(10.16 cm)

Sold out -23% sale

Peavey PVs 12 SUB, 1000W 12-inch Powered Subwoofer

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVs 12 SUB, 1000W 12-inch Powered Subwoofer $699.99 $899.99

The Peavey PVs 12 is a 1000W 12-inch Powered Subwoofer. This powered sub's vented enclosure houses a proprietary 12-inch woofer, which works alongside a state-of-the-art Bass Enhancement feature to ensure rafter-shaking bass. Beyond that, a built-in crossover and highpass outputs provide maximum flexibility in a myriad of applications with a wide range of speakers. The PVs 12 boasts DSP-based compression, limiting, and equalization, plus a XLR/quarter-inch combo input jack, a ground lift, and a polarity reverse. The ultra-compact PVs 12 includes a threaded pole mount with a speaker pole included. If you're searching for a compact, portable powered sub, the PVs 12 fits the bill. Product Specifications: LF Driver Size: 1 x 12" subwoofer Total Power: 1000W peak Inputs: 1 x XLR-1/4" combo Outputs: 3 x XLR (2 high pass, 1 thru) Mounting Options: Threaded pole mount Power Source: Standard IEC AC cable

Sold out -31% sale

Peavey PVs 15 SUB, 1000W 15-inch Powered Subwoofer

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVs 15 SUB, 1000W 15-inch Powered Subwoofer $799.99 $1,158.39

The Peavey PVs 15 is a 1000W 15-inch Powered Subwoofer. This powered sub's vented enclosure houses a proprietary 15-inch woofer, which works alongside a state-of-the-art Bass Enhancement feature to ensure rafter-shaking bass. Beyond that, a built-in crossover and highpass outputs provide maximum flexibility in a myriad of applications with a wide range of speakers. The PVs 15 boasts DSP-based compression, limiting, and equalization, plus an XLR/quarter-inch combo input jack, a ground lift, and a polarity reverse. The ultra-compact PVs 15 includes a threaded pole mount with a speaker pole included, along with locking casters with damped bearings. If you're searching for a compact, portable powered sub, the PVs 15 fits the bill. Product Specifications: LF Driver Size: 1 x 15" subwoofer Total Power: 1000W peak Inputs: 1 x XLR-1/4" combo Outputs: 3 x XLR (2 high pass, 1 thru) Mounting Options: Threaded pole mount Power Source: Standard IEC AC cable

-15% sale

Peavey PVXp 12 Bluetooth 12-inch Powered Loudspeaker

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVXp 12 Bluetooth 12-inch Powered Loudspeaker $599.99 $699.99

Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that delivers 980 Watts of peak dynamic power, with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output (Male XLR) can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder-coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -31% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey Vypyr X3 1 x 12" 100W Modeling Guitar/Bass/Acoustic Combo Amp $399.99 $579.19

Peavey Vypyr X3 1 x 12-inch 100-watt Modeling Guitar/Bass/Acoustic Combo Amp Peavey Electronics introduced the original VYPYR guitar amplifier in 2008. This game-changing amplifier launched many industry firsts, such as the first guitar amplifier to have on-board USB, stompbox presets, looper, five effects simultaneous operation, and TransTube, Peavey's revolutionary analog/digital hybrid technology. 2012 Peavey raised the bar again with the VYPYR VIP, the world's first Variable Instrument Performance amp. This was the first amplifier for electric, bass, and acoustic guitars. Additionally, Peavey was the first company to introduce instrument models to an already feature-packed amplifier. Now continuing the tradition of innovation and excellence, Peavey launches the VYPYR X modeling amplifier. This latest evolution of the groundbreaking VYPPeavey continues its updated styling and superior cabinet design by launching ingoustic performance and improved TransTube technology. The new VYPYR X3 also features Bluetooth remote control and audio streaming in. Now users can stream backing tracks into the amplifier and control all settings via iOS remote app control.. Usersan iOS remote app Analog Distortion Each VYPYR X is equipped with Peavey's exclusive TransTube technology. This true analog distortion not only sounds better, it leaves the amplifier's processing power dedicated to the effects, allowing the VYPYR X to run up to 5 effects simultaneously. When playing live, nothing "cuts through the mix" like a VYPYR. Many modeling amps simply can't be heard in a live setting because of their poor digital distortion and practice amp EQ. TransTube technology is designed analogically to emulate real tubes and sits perfectly in a live environment. Variable Instrument Input Thanks to our revolutionary cabinet design and world class processing, users can switch from electric guitar to bass or acoustic on the same amplifier. One amp for all of your performance needs. World-class—on their Instrument Models You can make your electric sound like an acoustic or bass guitar or, on the VYPYR X2, up to 10 different instrument models. Bluetooth VYPYR X Control You can control your VYPYR X2 remotely with an onboard Bluetooth wireless remote control via Peavey's exclusive VYPYR control app for iOS devices. Now, you can change and store all your favorite presets remotely. You can also stream audio, play your favorite backing tracks, or sit back and enjoy streaming your favorite music. WYSIWYG Interface Another Peavey original, the WYSIWYG (what you see is what you get) interface allows users to identify the position of the knobs with a glance at the amp. When a modeling amp changes preset, the settings on the knobs change with it; however, on most amps, the position of the knob no longer corresponds with the actual setting. This can cause confusion and mistakes that result in random, unwanted outcomes. With the VYPYR, the LEDs around the knob always indicate what position it is in relative to the current preset simply a better solution. Amp Accessible Operation Many competitors claim their amps have multiple effects and models, but most are not fully functional without external software. With the VYPYR X, you can access ANY of the amp's features, right from the front of the amp itself or with the use of h in the case of the looper. This is a key advantage of the amp's features. No, hooking up a computer to edit your favorite preset or swap out an effect; you can do it right from the amplifier. You don't need to connect to a computer; Packed with Amplifiers & Effects The VYPYR is packed with amplifiers & effects, so you don't need to buy them one at a time. Purchased individually, the amps and effects in the VYPYR amp could cost well over $50,000. Our VYPYR series is an unbelievable value. VYPY and Rs use the same technology found in Stompbox If purchased costs almost, as much as a VYPYR for a single effect., which For the same amount of money, the Peavey VYPYR X3 gives you 26 effects in addition to 10 instrument models and 36 amplifier models. General Features: 100W RMS Variable instrument input Lightweight and portable 10 instrument models Universal delay and reverb Headphone jack Analog TransTube distortion 12" custom-voiced heavy-duty speaker Over 400 amp accessible presets iOS and Android apps available for remote control and preset creation 12 amp accessible stompbox effects with dual parameter control Onboard looper with optional Sanpera footswitch (sold separately) Custom cabinet design for enhanced low-end response Semi-open-back design for enhanced volume and tone 3.5 mm AUX in for connecting external audio sources 36 onboard amp models, including six acoustic and six bass amp models 26 total onboard amp accessible effects Bluetooth wireless remote control and audio streaming in LED Screen for ease of setup and preset identification Packed Weight: 36.82 lb (16.7 kg) Packed Length: 22" (55.88 cm) Packed Width: 19.88" (50.5 cm) Packed Height: 10.63" (27 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-38% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVXp 10 10" Bluetooth Powered Loudspeaker $499.99 $799.99

Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The Peavey PVXp 10 is a Bluetooth-powered 10-inch loudspeaker. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet, and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector, featuring full-coverage, heavy-duty perforated steel grilles with a powder-coat finish. DSP I/O is 48 kHz and 24 bits; internal processing is 56-bit double-precision: Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is available via a combination of a female XLR and a 1/4" TRS phone jack with balanced input. There are three channels in total: two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel features a level control and a 3-band EQ section, allowing you to adjust and shape the input signals. General Features: Two-way bi-amped sound reinforcement enclosure RX™10 compression driver, with 1-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 520W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top and bottom flying point inserts 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder-coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 34.18 lb (15.5 kg) Packed Length: 22.441" (57 cm) Packed Width: 15.945" (40.5 cm) Packed Height: 14.37" (36.5 cm) Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-24% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVXp 15 15" 980W Bluetooth Active Powered Loudspeaker $699.99 $909.98

Peavey PVXp 15-inch 980-watt Powered Speaker with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The PVXp 15 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 15" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the speaker RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 15 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be lit when power is on and the "soft-limiting" DDT circuit is activated or turned off. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: 15" heavy-duty woofer delivers chest-thumping low-end RX 14 compression driver with 1.4" titanium diaphragm delivers smooth, high-end response Ultra-reliable fan-cooled power amps with DDT compression Patented Quadratic Throat Waveguide technology, 150 by 50-degree coverage Asymmetrical horn aims the sound down to 15 degrees (at the audience, not over their heads) Mic/Line switch provides two different gain settings Tailor your sound to different environments and configurations with built-in DSP Durable plastic injection-molded trapezoidal enclosure Full-coverage heavy-duty perforated steel grilles with powder-coat finish Pole mount molded-in for 1-3/8" diameter poles Top and bottom flying point inserts The extra angled section on the right side allows for floor monitor use Tech Specs Powered: Yes Power Configuration: Bi-amped LF Driver Size: 15" woofer, 2.3" voice coil HF Driver Size: RX14 1.4" titanium compression driver LF Driver Power Amp: 630W Peak HF Driver Power Amp: 200W Peak Total Power: 830W Peak Inputs: 1 x XLR-1/4" combo (mic/line), 2 x RCA (stereo line) Outputs: 1 x XLR (thru), 1 x 1/4" (thru) Frequency Range: 49Hz-20kHz Frequency Response: 58Hz-20kHz (±3dB) Crossover Frequency: 2.1kHz Maximum Peak SPL: 128 dB SPL @ 1m Horizontal Coverage Angle: 100 Degrees Vertical Coverage Angle: 50 Degrees Signal Processing: EQ Modes, Crossover, Limiter Enclosure Material: Plastic injection-molded trapezoidal enclosure Mounting Options: Pole Mount with 1.37" socket, 4 x M10 Fly Points, 12 x M8 Fly Points (for Versamount 70+ bracket) Power Source: Standard IEC AC cable Height: 28.25" Width: 18.9" Depth: 18.7" Weight: 51 lbs. Manufacturer Part Number: 03616470 Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-34% sale

Peavey PVXp 12 DSP 980-Watt 12-Inch Bluetooth Powered Speaker

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVXp 12 DSP 980-Watt 12-Inch Bluetooth Powered Speaker $599.99 $900.00

Peavey PVXp 12-inch Bluetooth Powered Speaker 980-watt with 1.4" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP PVXp series loudspeakers combine significant power with advanced DSP and Bluetooth wireless connectivity to take your live sound to a new level of sonic performance. The PVXp 12 Bluetooth features a reliable bi-amped power section that provides 980 Watts peak dynamic power with DSP-based compression and limiting. This enclosure features a 12" heavy-duty woofer with a 2 3/8 inch voice coil and 50-ounce magnet and the RX14 compression driver with a 1.4-inch titanium diaphragm on a 100-degree horizontal x 50-degree vertical pattern asymmetrical horn. The PVXp 12 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4 inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator can be set to light when power is on, and the "soft-limiting" DDT circuit is activated or turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector. General Features: Two-way bi-amped sound reinforcement enclosure RX14™ compression driver, with a 1.4-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 980W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top, bottom, and right side flying point inserts 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 50-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 46.97 lb (21.3 kg) Packed Length: 26.75" (67.95 cm) Packed Width: 20" (50.8 cm) Packed Height: 18.25" (46.36 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Sold out -31% sale

Peavey PV 14 AT, 14 Channel Compact Mixer with Bluetooth and Antares Auto-Tune

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PV 14 AT, 14 Channel Compact Mixer with Bluetooth and Antares Auto-Tune $499.99 $723.99

The Peavey PV 14 AT mixers come equipped with Antares Auto-Tune pitch correction, a technology that can literally help anyone sing in key and is used on professional recordings and live performances throughout the world. This technology is incorporated directly into a complete and powerful portable mixing solution, ensuring that your audience will experience perfectly tuned vocals to complement the crystal-clear audio of the mixer. Features such as Bluetooth allow seamless connection to almost any "smart" device. Direct out per channel allows easy connection to most DAW interfaces for recording. In addition, these mixers can stream audio directly to a PC. MP3 playback is also available via USB A port and LCD display. With a slim, low-profile design, PV AT series mixers are ideal in small to mid-size venues. Key features include 4 channels of Antares Auto-Tune, 8 channels of reference-quality mic preamps, 8 direct outputs for recording, Bluetooth wireless input, and built-in digital effects with LCD display. These all-new mixers will provide years of hassle-free operation. Product Specification: Product Dimensions: 16.1875" wide x 17.3" deep x 2.1875" high Width Packed: 18.7"(47.498 cm) Height Packed: 20.47"(51.9938 cm) Depth Packed: 3.54"(8.9916 cm) Weight Packed: 13.23 lb(6 kg)

Find anything you need

Hot Deals (14260)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER