Hot Deals | Absolute Pro Music – Page 333

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier +PVI100XLR Mic+2 Speaker Cables $679.99 $723.99

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-7% sale

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier +MSP1 Mic System + 2 PV 25' Cables

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier +MSP1 Mic System + 2 PV 25' Cables $679.99 $723.99

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-18% sale

Peavey IPR2 5000 2-channel Power Amplifier Bundle

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 5000 2-channel Power Amplifier Bundle $1,199.99 $1,447.99

Peavey IPR2 5000 2-channel Power Amplifier, 5000W, with built-in Crossovers, Speaker Protection, and a lightweight 13.6-lb chassis. + MR DJ USA Bundle 2 Speaker stands, 2 12' Speakon to Speakon cables, and a Carry Bag & Mobile Bracket Holder and Electrical Tape Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-18% sale

Peavey IPR2 5000 2-channel 5000W Power Amplifier + 2 Speaker Stand Bundle

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 5000 2-channel 5000W Power Amplifier + 2 Speaker Stand Bundle $1,199.99 $1,447.99

Peavey IPR2 5000 2-channel Power Amplifier, 5000W, with built-in Crossovers, Speaker Protection, and a lightweight 13.6-lb chassis. + MR DJ USA Bundle 2 Speaker stands, 2 12' Speakon to Speakon cables, and a Carry Bag. Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-18% sale

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier +MSP1 Mic System + 2 PV 25' Cables

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier +MSP1 Mic System + 2 PV 25' Cables $1,199.99 $1,447.99

Peavey IPR 2 5000 2-Channel Lightweight 5000W Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MSP1 Mic System Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-18% sale

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier +PVI100XLR Mic+2 Speaker Cables

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier +PVI100XLR Mic+2 Speaker Cables $1,199.99 $1,447.99

Peavey IPR 2 5000 2-Channel Lightweight 5000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + PVI100XLR Wired Dynamic Cardioid Vocal Microphone Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-18% sale

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier + 2 PV25 Speaker Cable

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR2 5000 2-Channel Lightweight 5000W Power Amplifier + 2 PV25 Speaker Cable $1,199.99 $1,447.99

Peavey IPR 2 5000 2-Channel Lightweight 5000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 5000 2-channel Power Amplifier, 5000W Max, 1510W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 13.6 lbs chassis IPR2 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: Rated Watts 2ch x 2 ohms 3230 watts 20ms repetitive burst / 2530 watts 1% THD both channels driven @ 1kHz Rated Watts 2ch x 4 ohms 1985 watts 20ms repetitive burst / 1700 watts 1% THD / 1470 watts 0.15% THD, both channels driven @ 1kHz Rated Watts 2ch x 8 ohms 1175 watts 20ms repetitive burst / 1025 watts 1% THD / 880 watts 0.15% THD, both channels driven @ 1kHz Two-channel independent, fourth-order Linkwitz-Riley crossovers DDT protection Revolutionary IPR class D topology Detented input controls Combination XLR 1/4" inputs Four pole twist lock output connectors Ultra-lightweight Individual signal pass 1/4" jacks on each channel LED illuminated Standby, LED power present indication Packed Weight: 17.42 lb (7.9 kg) Packed Length: 21.2" (53.85 cm) Packed Width: 21" (53.34 cm) Packed Height: 6" (15.24 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-7% sale

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier Bundle

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier Bundle $679.99 $723.99

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag & Mobile Bracket Holder and Electrical Tape Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-7% sale

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier + 2 Speaker Stand Bundle

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier + 2 Speaker Stand Bundle $679.99 $723.99

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable + MR DJ USA Bundle 2 Speaker stand & 2 12' Speakon to Speakon Cable & Carry Bag. Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-7% sale

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier + 2 PV25 Speaker Cable

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey IPR 2 2000 2-Channel Lightweight 2000W Power Amplifier + 2 PV25 Speaker Cable $679.99 $723.99

Peavey IPR 2 2000 2-Channel Lightweight 2000 Watt Power Amplifier + 2 PV25 25 Feet Speaker Cable Peavey IPR2 2000 2-channel Power Amplifier, 2000W Max, 530W RMS/ch at 4 ohms, with built-in Crossovers, Speaker Protection, lightweight 7.0 lbs chassis The Peavey IPR 2 2000 power amplifiers are designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers sonic superiority and unsurpassed reliability, for which Peavey is famous for its highly efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency under challenging loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and maintains sonic integrity, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures and does not require massive heat sinks to cool. General Features: 2- Channel independent fourth-order Linkwitz-Riley crossovers DDT Revolutionary IPR class D topology Detented input controls Speakon output connectors Light Weight LED illuminated Combi XLR 1/4" inputs Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz. Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz. Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz. Individual signal pass 1/4" jacks on each channel Weight Unpacked: 8.16 lb(3.7 kg) Weight Packed: 10.80 lb(4.9 kg) Width Packed: 12.4"(31.496 cm) Height Packed: 21"(53.34 cm) Depth Packed: 4.7"(11.938 cm) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-70% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey RX14 Professional 1.4" High Frequency Horn Drivers $79.99 $259.99

Peavey RX14 Professional 1.4" Professional High-Frequency Horn Drivers General Features: Peavey RX14 1.4" High Frequency Drivers. Throat Parameter: .938" / 23.8 mm. Nominal Impedance: 8 Ohms. Minimum Impedance: 7.1 Ohms. DC Resistance: 6.8 Ohms Power Capacity 1000 Hz to 20,000 Hz: 120 W peak, 60 W program30 W continuous. Sensitivity: 104 dB SPL 1 Watt at 1 meter On-axis on 90 H x 45 V horn Nominal Efficiency: 30%. Frequency Response: 1.5 kHz to 20 kHz. Recommended Crossover: 1,800 Hz at 12 dB / Octave. Lowest Recommended Crossover: 2,000 Hz at 12 dB / Octave Diaphragm: Commercially pure titanium. Voice Coil Diameter: 1.4" / 34.4 mm. Voice Coil Material: Edge-wound ribbon with high-temperature Kapton bobbin. Flux Density: 11,500 gauss (1.15T) Dimensions: 3.54" (90 mm) diameter, 2.40" (61 mm) depth. Horn Coupling Diameter: .938" (23.8 mm). Horn Coupling Threads: Standard 1 3/8" / 18". Net Weight: 33.6 oz. Details: Save with this bundle: Peavey 03495480 RX14 - 1 High-Frequency Compression Driver (Set of 2). The RX14 1" compression driver is known for excellent performance, reliability, and power handling. The voice coil is a copper-clad aluminum wire wound on a Kapton high-temperature coil former. The one-piece titanium diaphragm reduces the amount of moving mass, extending the driver's high-frequency response. Ferrofluid cooling improves reliability and smooths the frequency response. Package Dimensions: 4.2 x 4.2 x 3.2 inches Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

-37% sale

Peavey PVi 6500 6-channel 400W All in One Powered Mixer Amplifier with PV 20' Mic Cable

00
DAYS 00
HRS 00
MIN 00
SEC

Peavey PVi 6500 6-channel 400W All in One Powered Mixer Amplifier with PV 20' Mic Cable $509.99 $799.99

Peavey PVi 6500 6-channel 400W Powered Mixer Amplifier with Bluetooth, 6 Inputs, Built-in FX, 9-band Graphic EQ, Aux Audio Input, and SD Card/USB Audio Playback & PV 20' Mic Cable The Peavey PVi 6500 is a revolutionary all-in-one powered mixer. It provides everything a musician needs, including up to six simultaneous combinations of XLR and 1/4" inputs. It uses Peavey's award-winning Silencer mic preamps and 400 watts of power for crystal-clear audio reproduction. The Peavey PVi 6500 also features exclusive options, such as Mid Morph EQ, to help accurately enhance the tone and clarity of vocals. Feedback is quickly and easily identified and removed with Peavey's 9-band graphic EQ, combined with our revolutionary FLS Feedback Locating System. The PVi 6500 is equipped with Kosmos, drastically enhancing the audio spectrum's low and high ends. It is exclusively Peavey technology. Footswitchable, built-in 24-bit digital effects complement the already feature-packed unit by allowing users to select multiple varieties of reverb and delay. The onboard 1/4", RCA, and 1/8" mini jacks connect almost anything to this versatile mixer. General Features: FLS Feedback Locating System Footswitchable effects defeat Combination XLR and 1/4" input jacks RCA, 1/8" media input Selectable 9-band graphic EQ with FLS Selectable Main or Monitor dual power section RCA Record outputs Onboard 24-bit digital effects with a mute button Clip light and signal present indicator Main line level 1/4" output Speaker protection circuit 48-volt phantom power Bluetooth streaming audio Width Packed: 14"(35.56 cm) Height Packed: 19.75"(50.165 cm) Depth Packed: 13"(33.02 cm) Weight Unpacked: 20.02 lb(9.08 kg) Weight Packed: 22.29 lb(10.11 kg) Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Find anything you need

Hot Deals (14258)

NATIONWIDE DELIVERY

SECURE SHOPPING

SHOP WITH CONFIDENCE

HELP CENTER