Home Speakers (170)

Peavey PVXp 10-inch 520-watt Powered Speaker with 1" Compression Driver, Quadratic Throat Waveguide Technology, Asymmetrical Horn, Combo XLR and 1/4" TRS Input, 1/8" Input, Bluetooth, EQ, and DSP The Peavey PVXp 10 is a Bluetooth-powered 10-inch loudspeaker. The PVXp 10 Bluetooth features a reliable bi-amped power section that provides 520 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8-inch voice coil and 50-ounce magnet, and the RX10 compression driver with a 1-inch titanium diaphragm on a 100-degree horizontal x 60-degree vertical pattern asymmetrical horn. The PVXp 10 Bluetooth provides two channels with a balanced input via a combination jack that accepts a balanced TRS 1/4" inch input and a balanced XLR input. A switch is provided to change between line and mic level gain. A third channel is for a Bluetooth source or a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. A balanced output, a Male XLR, can feed the mixed signals from the three channels to another component. A front baffle LED indicator that can be set to light when power is on and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD, EQ preset, and other DSP operating parameters are accessed via a one-knob selector, featuring full-coverage, heavy-duty perforated steel grilles with a powder-coat finish. DSP I/O is 48 kHz and 24 bits; internal processing is 56-bit double-precision: Peavey's Quadratic Throat Waveguide technology, 100 by 60-degree coverage. The asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads. Analog input is available via a combination of a female XLR and 1/4" TRS phone jack with balanced input. There are three channels in total: two for analog and one for Bluetooth or AUX input via a 1/8" jack. Each channel features a level control and a 3-band EQ section, allowing you to adjust and shape the input signals. General Features: Two-way bi-amped sound reinforcement enclosure RX™10 compression driver, with 1-inch titanium diaphragm Reliable fan-cooled power amps with DSP protection Total of 520W peak dynamic power DSP control for precise crossover, EQ, and limiting functions Bluetooth® input is via a dedicated input channel Mix/Thru Output is via a male XLR jack Durable plastic injection-molded trapezoidal enclosure The extra angled section on the right side allows floor monitor use Pole mount molded-in for 1 3/8" diameter poles Top and bottom flying point inserts 10" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet Full-coverage heavy-duty perforated steel grilles with powder-coat finish DSP I/O is at 48 kHz and 24 bits; internal processing is 56-bit double-precision Peavey's Quadratic Throat Waveguide™ technology, 100 by 60-degree coverage Asymmetrical horn aims the sound down 10 degrees at the audience, not over their heads Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input Three channels in total, two for analog and one for Bluetooth or AUX input via a 1/8" jack Each channel has a level control and a 3-band EQ section to adjust and shape the input signals Packed Weight: 34.18 lb (15.5 kg) Packed Length: 22.441" (57 cm) Packed Width: 15.945" (40.5 cm) Packed Height: 14.37" (36.5 cm)   Warning: This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thrash215, 15" 1300W Powered PA Loudspeaker System Include MR DJ SS350 Speaker Stand For those who want to plug in, crank it up, and get down to business, Thrash is the loudspeaker for you. With flexible inputs, lightweight and durable construction, and a wall-shaking 1300W of power, Thrash has what it takes to keep up with every gig, rehearsal, rowdy spelling bee; you name it. The Mackie Thrash215 is a 2-way powered PA speaker with a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The Thrash215's mixer features two combo XLR-1/4" mic/line/Hi-Z channels with dedicated gain controls. An XLR output is also provided for daisy-chaining additional speakers. The rugged, impact-resistant enclosure ensures protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. The speaker's angled design allows it to be used as a floor monitor for onstage performance monitoring. General Features: 1300W ultra-efficient Class-D amplifier Built-Like-A-Tank to conquer every gig while being lightweight for easy loading Flexible I/O 15" high-performance woofer Standard pole mount Equipped with four handles for easy loading Dual-angle monitor wedge for use as a floor monitor Rotatable grille badge Powered: Yes Power Configuration: Single Amp LF Driver Size: 15" woofer HF Driver Size: 1" Titanium compression driver Total Power: 1300W Class D Inputs: 2 x XLR-1/4" combo Outputs: 1 x XLR (mix) Frequency Response: 52Hz-20kHz (-10dB) Maximum Peak SPL: 126 dB SPL @ 1m Mounting Options: Pole, Floor Wedge Power Source: Standard IEC AC cable Height: 28" Width: 17.1" Depth: 14.3" Weight: 40.78 lbs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.    

Mackie Thrash215, 15" 1300W Powered PA Loudspeaker System + MR DJ SS350 Speaker Stand For those who want to plug in, crank it up, and get down to business, Thrash is the loudspeaker for you. With flexible inputs, lightweight and durable construction, and a wall-shaking 1300W of power, Thrash has what it takes to keep up with every gig, rehearsal, rowdy spelling bee; you name it. The Mackie Thrash215 is a 2-way powered PA speaker with a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The Thrash215's mixer features two combo XLR-1/4" mic/line/Hi-Z channels with dedicated gain controls. An XLR output is also provided for daisy-chaining additional speakers. The rugged, impact-resistant enclosure ensures protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. The speaker's angled design allows it to be used as a floor monitor for onstage performance monitoring. General Features: 1300W ultra-efficient Class-D amplifier Built-Like-A-Tank to conquer every gig while being lightweight for easy loading Flexible I/O 15" high-performance woofer Standard pole mount Equipped with four handles for easy loading Dual-angle monitor wedge for use as a floor monitor Rotatable grille badge Powered: Yes Power Configuration: Single Amp LF Driver Size: 15" woofer HF Driver Size: 1" Titanium compression driver Total Power: 1300W Class D Inputs: 2 x XLR-1/4" combo Outputs: 1 x XLR (mix) Frequency Response: 52Hz-20kHz (-10dB) Maximum Peak SPL: 126 dB SPL @ 1m Mounting Options: Pole, Floor Wedge Power Source: Standard IEC AC cable Height: 28" Width: 17.1" Depth: 14.3" Weight: 40.78 lbs Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.    

Mackie Thump GO 200-watt 8" 2-way Battery-powered portable loudspeaker +MR DJ stand and 2 MR DJ 6' 1/4' to 1/4' cable Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 2-Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers the Ch 2 level when Ch 1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump GO 200-watt 8" 2-way Battery-powered portable loudspeaker +MR DJ stand Built to make your life a whole lot easier, Thump GO offers a lightning-fast setup and simple-yet-powerful sound processing, plus flexible inputs, Bluetooth® streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. Take the performance of the renowned Thump Series anywhere with Thump GO. BATTERY POWERFUL Pair a Bluetooth® enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 2-Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth® connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers the Ch 2 level when Ch 1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Smart input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump GO Battery-powered Loudspeaker The Mackie Thump GO 8-inch Portable Battery-powered Loudspeaker delivers the full, well-balanced projection of a Mackie loudspeaker in a lighter-weight package for easier on-the-go use. An 8-inch custom high-output woofer pairs with a 1-inch compression driver to provide powerful audio with incredible dynamic range, ensuring a full bass sound with hard-cutting treble. The Thump GO is powered by a removable lithium-ion battery with up to 12 hours of life; a tri-color battery life indicator ensures you can reliably keep the tunes playing all day long. You can stream music from any device with Bluetooth connectivity, link to another Thump GO for maximum playback, and control everything via the Thump GO Connect app. At Sweetwater, we love the innovative capabilities of the Thump GO's 2-channel digital mixer with XLR outputs, including "Music Ducking mode," to automatically lower channel two when channel one receives the signal. With four application-specific speaker modes, indoor/outdoor voicing modes, and a built-in pole mount, you can also take your Thump GO set up outside. Rest it on the ground easily at its 45-degree monitor angle, knowing that its durable molded enclosure and rugged powder-coated steel grille will protect it. Whether you want to stream music or set up a PA, the Thump GO is your lightweight, portable loudspeaker solution for any larger indoor or outdoor space. General Features: Ultra-efficient Class-D amplifier with lightweight design 8-inch custom high-output woofer with 1-inch compression driver for full, even projection Removable lithium-ion battery with 12 hours of life; tri-colored battery life indicator Bluetooth connectivity with linking for a second Thump GO and easy streaming control via the Thump GO Connect App 2-channel digital mixer with XLR output and gain balance for PA use Four application-specific speaker modes: indoor/outdoor voicing modes Smart input and thermal limiters; "Music Ducking mode" for automatically lowering Ch. 2 level when Ch . 1 receives a signal Great for outdoor spaces with built-in pole mounts Durable, lightweight molded enclosure, powder-coated steel grille, and 45° resting monitor angle Dimensions: 18 inches (H) x 9.1 inches (W) x 11.2 (D) inches Weight: 17.6 lb. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump GO 200-Watt 8" 2-way Battery-powered portable loudspeaker Built to make your life easier, Thump GO offers a lightning-fast setup and simple yet powerful sound processing. It also provides flexible inputs, Bluetooth streaming, and wireless control via the Thump Connect 2 app. Most importantly, Thump GO will amplify the real you with clear, punchy, and accurate sound wherever you call your stage. With Thump GO, you can take the performance of the renowned Thump Series anywhere. BATTERY POWERFUL Pair a Bluetooth-enabled device with your Thump Go speaker, and you'll be dancing in no time. Thump Go brings the signature Thump punch and clarity in an ultra-portable design with a removable battery pack so you can sound your best anywhere for up to 12 hours on a Single Charge. BUILT-IN 2-CHANNEL MIXER Mic, guitar, keyboard, you made it. Just plug in, and you are good to go. Pull up the Thump Connect 2 app and get your sound dialed in just right, or even stream some backing tracks from your phone General Features: 2-Mackie Thump Go 8" Portable Battery-Powered Loudspeaker Ultra-efficient 200W Class-D amplifier 8” Custom high-output woofer 1" Compression driver Removable lithium-ion battery (included) Tri-color battery life indicator Up to 12 hours of battery life Bluetooth connectivity for music streaming Wireless control via the Thump Connect 2 app Link to a second Thump GO via Bluetooth for music playback and control 2-channel digital mixer with XLR mix output Feedback Eliminator prevents nasty squeals and unwanted rumbles Four application-specific speaker modes Music Ducking mode automatically lowers the Ch 2 level when Ch 1 receives a signal Indoor / Outdoor voicing modes Precision digital crossover and driver alignment Intelligent input and thermal limiters Durable, lightweight molded enclosure 45-degree monitor angle Built-in pole mount Rugged powder-coated steel grille Weight: 17.6 lb / 8 kg Dimensions (HxWxD): 18 x 9.1 x 11.2 in / 457 x 230 x 285 Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Mackie Thump Go 8″ Battery-Powered Loudspeaker, Gator GPA-Tote8, XLR Cable Bundle Ultra-efficient Class-D amplifier powers an 8-inch Custom high-output woofer and 1" Compression driver. Removable lithium-ion battery with tri-color battery life indicator Bluetooth connectivity for wireless streaming and control via the Thump GO app 2-channel digital mixer with XLR mix output with Music Ducking mode Lightweight Speaker Tote Bag Designed to Fit the Hottest 8” Speaker Cabinets on the Market, including the QSC K8, iQ8, and Yamaha DXR8 Rugged Water Resistant Polyester Construction and Protective, Padded Interior with Soft Lining Heavy‐Duty Dual Zipper Design Opens Entire Top of Bag for Easy Loading and Unloading Secure‐Wrap, Reinforced Dual Handles and Straps Distribute Weight of the Speaker and Reduce Wear on the Bag Ample Storage with Large Exterior Pocket for Cables and Accessories. Removable lithium-ion battery with tri-color battery life indicator Lightweight Speaker Tote Bag Designed to Fit the Hottest 8” Speaker Cabinets on the Market, including the QSC K8, iQ8, and Yamaha DXR8 Rugged Water Resistant Polyester Construction and Protective, Padded Interior with Soft Lining Heavy‐Duty Dual Zipper Design Opens Entire Top of Bag for Easy Loading and Unloading Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.