00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega CVP1200.4D CVP Series 4-Channel Class D 1-Ohm Stable Amplifier
$119.99
$239.99
Cerwin Vega CVP1200.4D 4-Channel 1200W Bridgeable Class D Amplifier
The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for those that are budget-conscious. And with this 1,200 Watt Max 4 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an outside third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and follows standards and practices set forth by CTA (Consumer Technology Association).
General Features:
Cerwin Vega CVP1200.4D
CVP Series 4-Channel Class D 1 Ohm Stable Amplifier
RMS Power Rating:
150 Watts x 4 @ 2Ω
100 Watts x 4 @ 4Ω
Total RMS power output: 600 Watts
Total Peak power output: 1200 Watts
Class-D Circuitry
2-Ohm Stereo, 4-Ohm Bridged Full Range Operation
Handles HI and LO level input to 12V
Direct Short, Thermal, & Overload Circuits Protect Amplifier
200mV-6V High Level or Low-Level RCA Input
Variable 12dB High, Low, & Subsonic Crossovers
Fuse - 25 amp x 2
Dimensions: 11.81"W x 9.05"L x 2.09"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Includes official LAB vinyl sticker (2.13" x 2.75")
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega CVP2500.5D 2500W 5-Channel Car Audio Amplifier Amp System CVP-Series
$239.99
$499.99
Cerwin Vega CVP2500.5D 5-Channel 2500 Watts Bridgeable Class-D Amplifier
The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for budget-conscious individuals. And with this 2,500-watt Max 5 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the correct power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an independent third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and adherence to the standards and practices set forth by the CTA (Consumer Technology Association).
General Features:
CVP Series 5-Channel Amplifier
Class-D Full-Range Monoblock Amplifier
150 watts x 4 channel + 500 Watts @ 2 Ohms RMS Power
100 watts x 4 channel + 350 Watts @ 4 Ohms RMS Power
300 watts x 2 channel + 500 Watts @ 4 Ohms RMS Power Bridged
Class-D Circuitry
2-Ohm Stereo, 4-Ohm Bridged Full Range Operation
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Variable 12dB High, Low, & Subsonic Crossovers
Dimensions: 14.97"W x 9.38"L x 2.25"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Cerwin Vega CVP2500.5D 2500W 5-Channel Car Audio Amplifier + 4 Gauge Amp Kit
$249.99
$499.99
Cerwin Vega CVP2500.5D 5-Channel 2500 Watts Bridgeable Class-D Amplifier + Absolute KIT4 4 Gauge Amp Kit
The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for budget-conscious individuals. And with this 2,500-watt Max 5 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an independent third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and adherence to the standards and practices set forth by the CTA (Consumer Technology Association).
General Features:
CVP Series 5-Channel Amplifier
Class-D Full-Range Monoblock Amplifier
150 watts x 4 channel + 500 Watts @ 2 Ohms RMS Power
100 watts x 4 channel + 350 Watts @ 4 Ohms RMS Power
300 watts x 2 channel + 500 Watts @ 4 Ohms RMS Power Bridged
Class-D Circuitry
2-Ohm Stereo, 4-Ohm Bridged Full Range Operation
Direct Short, Thermal, & Overload Circuits Protect Amplifier
Variable 12dB High, Low, & Subsonic Crossovers
Dimensions: 14.97"W x 9.38"L x 2.25"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-450 Car Amplifier 4-Channel 200 Watt RMS Power Pack Amplifier
$199.95
$350.00
Alpine KTA-450 4-Channel 200 Watt RMS Power Pack AmplifierDynamic Peak Power (DPP) Technology
The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW.
General Features:
Alpine KTA-450
Class D 4-channel Weather Resistant Power Pack Amplifier
CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category
Power Handling
50W RMS x 4 @ 4 Ohms
45W RMS x 4 @ 2 Ohms
Total Power Handling: 200W RMS
CTA-2006 compliant
Frequency Response: 15-50 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels
Fuse Rating: 15A
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-450 Package:
KTA-450 Package owner's manual
4-Channel amplifier
Wiring harness
Mounting plate
2 Mounting brackets
4 Wire-ties
4 Hex-head machine screws
2 Pan-head machine screws
4 Pan-head self-tapping screws
Warranty Information
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-450 Car Amplifier
$199.95
$350.00
Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology
The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW.
General Features:
Alpine KTA-450
Class D 4-channel Weather Resistant Power Pack Amplifier
CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category
Power Handling
50W RMS x 4 @ 4 Ohms
45W RMS x 4 @ 2 Ohms
Total Power Handling: 200W RMS
CTA-2006 compliant
Frequency Response: 15-50 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels
Fuse Rating: 15A
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-450 Package:
KTA-450 Package owner's manual
4-Channel amplifier
Wiring harness
Mounting plate
2 Mounting brackets
4 Wire-ties
4 Hex-head machine screws
2 Pan-head machine screws
4 Pan-head self-tapping screws
Warranty Information
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A32F S-Series 4-Channel Digital Amplifier 80 Watts RMS x 4
$299.95
$280.00
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier
The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier.
These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features:
Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier
S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
S-Series Amplifier: Known for reliable performance and value-oriented products.
Power Output:
55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N)
80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N)
Total power output: 320 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and short speaker protection)
Frequency Response: 10 - 30,0000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 83 dB
Variable high-pass filter: 50 - 400 Hz, 12 dB/octave
Variable low-pass filter: 50 - 400 Hz, 12 dB/octave
Fuse Rating: 40
Improved heat sink and protection circuit design
Contain technology currently implemented in the Alpine R and X-Series models
105dB Signal-to-Noise (S/N) ratio at rated power
46 degrees of phase shift
Designed to perform perfectly with the existing S-Series speakers and subwoofers
Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-A32F package:
S-A32F owner's manual
4-Channel amplifier
One 40-amp ATO fuse
Four 3/4" Screws
2mm Allen wrench
Alpine Verification Certificate
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE S-A55V
$499.95
$600.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A55V 540W RMS Car Amplifier S-Series 5-Channel Class D Amplifier
$499.95
$600.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A55V S-Series 5ch Amp - 60 Watts x 4 @ 2-Ohms & 300 Watts x 1 @ 2-Ohms
$499.95
$600.00
Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS
The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features:
5-channel Class D Amplifier
Power Output:
40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
CTA-2006 compliant
Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
Variable bass boost (0-12 dB at 50 Hz) on a subchannel
Optional RUX-KNOB.2 wired remote level control for a subchannel
Preamp and speaker-level inputs
speaker wire to RCA adapter required for speaker-level input
Wiring and hardware not included with amplifier
4-gauge power and ground leads recommended
Fuse rating: 30A x 2
Dimensions: 11-1/4" W x 2-1/4" H x 8" D
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
5-Channel amplifier
Two 30-amp ATO fuses (installed)
Four 3/4" Screws
2mm Allen wrench
Owner's manual (English/ French/ Spanish)
Alpine Verification Certificate
Warranty information
Power supply note
Online product registration information
Alpine S-A55V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE S-A32F 4-Channel Digital Class D Car Audio Amplifier
$299.95
$280.00
Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier
The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier.
These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features:
Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier
S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value.
S-Series Amplifier: Known for reliable performance and value-oriented products.
Power Output:
55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N)
80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N)
Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N)
Total power output: 320 watts
CEA-2006 Compliant Amplifier
LED Power/Protect Light
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and short speaker protection)
Frequency Response: 10 - 30,0000 Hz
Total Harmonic Distortion (THD): <1%
Signal Noise Ratio: 83 dB
Variable high-pass filter: 50 - 400 Hz, 12 dB/octave
Variable low-pass filter: 50 - 400 Hz, 12 dB/octave
Fuse Rating: 40
Improved heat sink and protection circuit design
Contain technology currently implemented in the Alpine R and X-Series models
105dB Signal-to-Noise (S/N) ratio at rated power
46 degrees of phase shift
Designed to perform perfectly with the existing S-Series speakers and subwoofers
Dimensions: 8” W x 8” H x 2.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-A32F package:
S-A32F owner's manual
4-Channel amplifier
One 40-amp ATO fuse
Four 3/4" Screws
2mm Allen wrench
Alpine Verification Certificate
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE X-A90V
$999.95
$950.00
Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features:
Alpine X-Series X-A90V
Class-D Full Range 2 ohm Stable 5-Channel Amplifier
RMS Power Rating:
4-channel side
4 ohms: 75 watts x 4 channel
2 ohms: 100 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 200 watts x 2 channel
Subchannel
4 ohms: 300 watts x 1 chan.
2 ohms: 500 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote bass level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
5/3 channel operation
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .5 - 10V
Low level: .2 - 4V
Frequency Response:
4-channel: 10 - 60,000Hz
Sub-channel: 8 - 400Hz
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >105dB
Variable high-pass filter: 50 - 400Hz, -24dB/octave
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Subsonic filter: 8 - 40Hz
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
-Channel amplifier
Three 30A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
3 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-A90V X-Series 5-Channel Power Density Amplifier
$999.95
$1,500.00
Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features:
Alpine X-Series X-A90V
Class-D Full Range 2 ohm Stable 5-Channel Amplifier
RMS Power Rating:
4-channel side
4 ohms: 75 watts x 4 channel
2 ohms: 100 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 200 watts x 2 channel
Subchannel
4 ohms: 300 watts x 1 chan.
2 ohms: 500 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote bass level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
5/3 channel operation
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .5 - 10V
Low level: .2 - 4V
Frequency Response:
4-channel: 10 - 60,000Hz
Sub-channel: 8 - 400Hz
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >105dB
Variable high-pass filter: 50 - 400Hz, -24dB/octave
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Subsonic filter: 8 - 40Hz
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
-Channel amplifier
Three 30A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
3 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov