Cameras, Video & GPS (213)

Alpine KTX-C10LP License Plate Mounting Kit + Alpine HCE-C1100 Rear View Camera Alpine HCE-C1100 Universal backup camera surface-mount Back up betterAlpine's HCE-C1100 backup camera is an excellent add-on when buying a new touchscreen car stereo. With low light capability and a wide viewing angle, you'll have a perfect picture of what's behind your vehicle, day or night.This tiny camera measures less than one square inch, so it'll fit just about anywhere. The package includes a 21-foot cable with composite video RCA plugs that allows the camera to connect to any in-dash receiver or front-mount screen with a composite video input.Frame itGeneral Features: backup camera with standard composite (RCA) video cable mounting hardware and 21-foot power/video cable included compatible with any radio with an RCA video input (most aftermarket models, only a few factories) 1/4" CMOS image sensor color video output illumination range: 1.5 to 100,000 lux weather-proof camera housing warranty: 1 year MFR # HCE-C1100 What's in the HCE-C1100 package: HCE-C1100 owner's manual Rearview camera (attached 5' power/ground cable) 23' Composite video cable Mounting bracket Hex-key Rubber sleeve 4 Large screws 2 Small screws Owner's Manual Alpine KTX-C10LP License Plate Mounting Kit General Features: Alpine KTX-C10LP License Plate Mounting Kit Works with select Alpine rear-view cameras Easy to install Constructed from a rigid, sturdy cast metal frame Built-in LEDs illuminate your plate for added safety Connect to any in-dash monitor or AV head unit with auxiliary input Convenient camera view provides protection when backing up Compatible with Alpine HCE-C105 and Alpine HCE-C107D Authorized Dealer 1-year Manufacturer's Warranty What's in the KTX-C10LP package: KTX-C10LP owner's manual License plate frame mount Camera mounting bracket 4 Self-tapping screws 4 Hex-head screws 4 Large machine screws with flat and lock washers installed 4 Small machine screws Hex key Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTX-C10LP License Plate Mounting Kit + Alpine HCE-C1100 Rear View Camera Alpine HCE-C1100 Universal backup camera surface-mount Back up betterAlpine's HCE-C1100 backup camera is an excellent add-on when buying a new touchscreen car stereo. With low light capability and a wide viewing angle, you'll have a perfect picture of what's behind your vehicle, day or night.This tiny camera measures less than one square inch, so it'll fit just about anywhere. The package includes a 21-foot cable with composite video RCA plugs that allows the camera to connect to any in-dash receiver or front-mount screen with a composite video input.Frame itGeneral Features: backup camera with standard composite (RCA) video cable mounting hardware and 21-foot power/video cable included compatible with any radio with an RCA video input (most aftermarket models, only a few factories) 1/4" CMOS image sensor color video output illumination range: 1.5 to 100,000 lux weather-proof camera housing warranty: 1 year MFR # HCE-C1100 What's in the HCE-C1100 package: HCE-C1100 owner's manual Rearview camera (attached 5' power/ground cable) 23' Composite video cable Mounting bracket Hex-key Rubber sleeve 4 Large screws 2 Small screws Owner's Manual Alpine KTX-C10LP License Plate Mounting Kit General Features: Alpine KTX-C10LP License Plate Mounting Kit Works with select Alpine rear-view cameras Easy to install Constructed from a rigid, sturdy cast metal frame Built-in LEDs illuminate your plate for added safety Connect to any in-dash monitor or AV head unit with auxiliary input Convenient camera view provides protection when backing up Compatible with Alpine HCE-C105 and Alpine HCE-C107D Authorized Dealer 1-year Manufacturer's Warranty What's in the KTX-C10LP package: KTX-C10LP owner's manual License plate frame mount Camera mounting bracket 4 Self-tapping screws 4 Hex-head screws 4 Large machine screws with flat and lock washers installed 4 Small machine screws Hex key Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.  

Alpine Front+Rear Car Camera w/License Plate Bracket+Switch Multi-View Selector Package Includes: (1) Alpine KCX-C2600B Single Monitor Front+Rear Camera Selector w/Switch View Button (1) Alpine HCE-C2600FD Weather Resistant Multi-View Front Car Camera (1) Alpine HCE-C1100 Rear View Backup HDR Car Camera w/Direct/Universal Connections (1) Alpine KTX-C10LP License Plate Rear Camera Mounting Kit For Select Backup Cams Authorized Alpine Dealer! Alpine KCX-C2600B General Features: dual-camera selector interface for use with aftermarket cameras and receivers enhanced for use with Alpine Direct cameras two proprietary inputs: compatible with two Alpine Direct cameras one RCA input for use with a non-Alpine multi-view camera select camera view from included remote includes required video and power cables warranty: 1 year What is in the KCX-C2600B package: KCX-C2600B owner's manual A dual multi-camera selector interface module Controller 6.5' Composite video cable 3 Self-adhesive clips 2 Hook-and-loop strips Two-sided tape Alpine HCE-C2600FD General Features: front-view camera High Dynamic Range technology for more detail in light and dark conditions 1/4" CMOS image sensor with approximately 1.2-megapixel resolution color video output three viewing angles 180° horizontal and 125° vertical viewing angles 1.5 Lux minimum for night driving IP 68 weather-proof camera housing universal mounting hardware and power/video cable included for use with a compatible Alpine car stereo or a KCX-C250MC multi-camera selector connected to an Alpine car stereo compatible with Alpine's KTX-C10LP license plate camera mounting kit (not included) warranty: 1 year What is in the HCE-C2600FD package: HCE-C2600FD owner's manual Front-view camera 10' Power/Video harness 2-Piece mounting bracket 4 Machine screws 4 Self-tapping screws 5 Wire-clips Alpine HCE-C1100 Universal backup camera surface-mount Back up betterAlpine's HCE-C1100 backup camera is an excellent add-on when buying a new touchscreen car stereo. With low light capability and a wide viewing angle, you'll have a perfect picture of what's behind your vehicle, day or night.This tiny camera measures less than one square inch, so it'll fit just about anywhere. The package includes a 21-foot cable with composite video RCA plugs that allows the camera to connect to any in-dash receiver or front-mount screen with a composite video input.Frame itGeneral Features: backup camera with standard composite (RCA) video cable mounting hardware and 21-foot power/video cable included compatible with any radio with an RCA video input (most aftermarket models, only a few factories) 1/4" CMOS image sensor color video output illumination range: 1.5 to 100,000 lux weather-proof camera housing warranty: 1 year MFR # HCE-C1100 What's in the HCE-C1100 package: HCE-C1100 owner's manual Rearview camera (attached 5' power/ground cable) 23' Composite video cable Mounting bracket Hex-key Rubber sleeve 4 Large screws 2 Small screws Owner's Manual Alpine KTX-C10LP License Plate Mounting Kit General Features: Alpine KTX-C10LP License Plate Mounting Kit Works with select Alpine rear-view cameras Easy to install Constructed from a rigid, sturdy cast metal frame Built-in LEDs illuminate your plate for added safety Connect to any in-dash monitor or AV head unit with auxiliary input Convenient camera view provides protection when backing up Compatible with Alpine HCE-C105 and Alpine HCE-C107D Authorized Dealer 1-year Manufacturer's Warranty What's in the KTX-C10LP package: KTX-C10LP owner's manual License plate frame mount Camera mounting bracket 4 Self-tapping screws 4 Hex-head screws 4 Large machine screws with flat and lock washers installed 4 Small machine screws Hex key Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine HCE-C2100RD HDR Rear View Camera Multi-View Rear HDR Camera System, designed for Alpine video receivers Universal Waterproof Bracket Mount Backup Camera This all-new rear-view HDR camera system provides parking safety with cutting-edge camera technology and full touch-screen operation. Thanks to HDR technology, the picture quality is much better compared to regular camera systems - for easier maneuvering and greater safety. It automatically activates when reversing and also mutes the audio so you can hear the parking sensor signals. There is a choice of four viewing modes and you can even activate a trailer hitch guideline. All New Alpine HDR Cameras Alpine’s all-new HDR cameras are simply amazing and offer many new technologies that make maneuvering your vehicle easier and safer. High-resolution camera for great picture quality and high details Amazing night-view capabilities in low-light environments Fast exposure adjustment when moving from dark to bright environments (for example underground parking, tunes, etc) New, small connectors for easy installation of camera and cables General Features: Alpine HCE-C2100RD HDR Camera: Enhances detail in dark environments 4 Selectable view modes, rear, panorama, corner, and ground, with select Alpine Head Units with the Direct Connection and Multi Camera-Selectors Alpine KCX-C250MC Alpine KCX-C2600B Switch to a license plate mount by adding the Alpine KTX-C10LP Automatic exposure and white balance adjustments Wide illumination range, from 1.5 lux to 100,000 lux Universal Rear View HDR Backup Camera Mounting Style: Bracket Mount Viewing Angle: 180° Waterproof: Yes, IP68 rated Resolution: 1280 x 960 Also found as Alpine Backup Camera, Alpine Rearview Camera Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Multi-view camera (attached 20" harness terminated by 5-pin harness) 32.5' Power/Video harness (with a female 5-pin connector on one end and a male 6-pin connector on other ends) 2-Piece mounting bracket 4 Machine screws 4 Self-tapping screws Rubber sleeve Rubber wedge 3M tape 5 Wire-ties Owner's Manual (En/Fr/Sp) Alpine HCE-C2100RD owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine HCE-C2100RD HDR Rear View Camera Multi-View Rear HDR Camera System, designed for Alpine video receivers Universal Waterproof Bracket Mount Backup Camera This all-new rear-view HDR camera system provides parking safety with cutting-edge camera technology and full touch-screen operation. Thanks to HDR technology, the picture quality is much better compared to regular camera systems - for easier maneuvering and greater safety. It automatically activates when reversing and also mutes the audio so you can hear the parking sensor signals. There is a choice of four viewing modes and you can even activate a trailer hitch guideline. All New Alpine HDR Cameras Alpine’s all-new HDR cameras are simply amazing and offer many new technologies that make maneuvering your vehicle easier and safer. High-resolution camera for great picture quality and high details Amazing night-view capabilities in low-light environments Fast exposure adjustment when moving from dark to bright environments (for example underground parking, tunes, etc) New, small connectors for easy installation of camera and cables General Features: Alpine HCE-C2100RD HDR Camera: Enhances detail in dark environments 4 Selectable view modes, rear, panorama, corner, and ground, with select Alpine Head Units with the Direct Connection and Multi Camera-Selectors Alpine KCX-C250MC Alpine KCX-C2600B Switch to a license plate mount by adding the Alpine KTX-C10LP Automatic exposure and white balance adjustments Wide illumination range, from 1.5 lux to 100,000 lux Universal Rear View HDR Backup Camera Mounting Style: Bracket Mount Viewing Angle: 180° Waterproof: Yes, IP68 rated Resolution: 1280 x 960 Also found as Alpine Backup Camera, Alpine Rearview Camera Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Multi-view camera (attached 20" harness terminated by 5-pin harness) 32.5' Power/Video harness (with a female 5-pin connector on one end and a male 6-pin connector on other ends) 2-Piece mounting bracket 4 Machine screws 4 Self-tapping screws Rubber sleeve Rubber wedge 3M tape 5 Wire-ties Owner's Manual (En/Fr/Sp) Alpine HCE-C2100RD owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine KCX-C2600B Universal Front and Rear Camera Selector Easily control your single view camera or Alpine direct multi-view cameras with the KCX-C2600B Front and Rear Camera Switcher. Use the two-button controller to choose the desired camera and toggle through the various viewing modes from the camera (when connected to a multi-view camera). The controller can be mounted on your dashboard for easy access. The KCX-C2600B features two direct inputs for the front and rear cameras, and one RCA input for a non-Alpine rear camera. It also has one universal RCA output for other display devices such as a factory screen (third-party factory camera interface required). General Features: Control module for multiple camera systems Recommended cameras include the Alpine HCE-C2100RD Front and rear view cameras connect into one module Connect two multi-view cameras to screens with the RCA input Included switch allows selection of viewing modes Supports power supply for direct cameras Also found as: Dimensions: 3.9"W x 1.9"D x .9"H Authorized Internet Dealer 1-year Warranty Output Image: Normal image, NTSC Video signal 16:9 Image output for wide-screen Image Output impedance: 75 Ohm (1Vp-p) Power Requirement: 12 V.DC Negative Ground Power Consumption: Less than 1.7W (12V) Operating Temperature: -30°C - +80°C What's in the box: Alpine KCX-C2600B owner's manual Dual multi-camera selector interface module (attached 6.5' power/ground/reverse-in wires and 19.5' reverse out wire) Controller (attached 9.75' cable) 6.5' Composite video cable 3 Self-adhesive clips 2 Hook-and-loop strips Two-sided tape ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine KCX-C2600B Universal Front and Rear Camera Selector Easily control your single view camera or Alpine direct multi-view cameras with the KCX-C2600B Front and Rear Camera Switcher. Use the two-button controller to choose the desired camera and toggle through the various viewing modes from the camera (when connected to a multi-view camera). The controller can be mounted on your dashboard for easy access. The KCX-C2600B features two direct inputs for the front and rear cameras, and one RCA input for a non-Alpine rear camera. It also has one universal RCA output for other display devices such as a factory screen (third-party factory camera interface required). General Features: Control module for multiple camera systems Recommended cameras include the Alpine HCE-C2100RD Front and rear view cameras connect into one module Connect two multi-view cameras to screens with the RCA input Included switch allows selection of viewing modes Supports power supply for direct cameras Also found as: Dimensions: 3.9"W x 1.9"D x .9"H Authorized Internet Dealer 1-year Warranty Output Image: Normal image, NTSC Video signal 16:9 Image output for wide-screen Image Output impedance: 75 Ohm (1Vp-p) Power Requirement: 12 V.DC Negative Ground Power Consumption: Less than 1.7W (12V) Operating Temperature: -30°C - +80°C What's in the box: Alpine KCX-C2600B owner's manual Dual multi-camera selector interface module (attached 6.5' power/ground/reverse-in wires and 19.5' reverse out wire) Controller (attached 9.75' cable) 6.5' Composite video cable 3 Self-adhesive clips 2 Hook-and-loop strips Two-sided tape ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Absolute CAM1500B FOR Kenwood DDX392 Night Vision - Color Rear View Camera Black License Plate Frame Displays a reversed camera image on the monitor to duplicate the normal view seen in a rear-view mirror. The perfect solution to get rid of that poor rear-view visibility in your car, boat, trailer, camper, truck, or any vehicle that has no rear-view mirror or poor rear vision. Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most vehicle key holes, no other installation needed. High-definition 170° wide viewing angle Waterproof and dust-proof design 8pcs IR LED light with night vision Minimum illumination auto fill light Concealed installation. General Features: Solid Black Aluminum Frame Protects Form Incidental Damage Water -Cold Weather & Vibration Proof Ip68 Powerful 1/4 CMOS RGB Color/ Image Sensor Effective Pixels 628* 586 Sensor Size 5.961* 4.276mm Min Resolution 420 Tv Lines Lens 1.8 Mm 170 Degrees Electronic Shutter Speed 1/50-1/100,000 Per Second Low Current Consumption 300ma Max Min Operating Temperature 30 Degrees C Cold Temperature Anti Fog Function 8 Powerful Infrared LEDs Real-Time Viewing Up To 300 Meters 170 Degree Adjustable Wide-Angle Lens for Optimal Blindspot Elimination Min Illumination 0 Lux On-Screen Distance Guide Display for Assisted Parking Easy to Follow Installation Instructions Comes with 17’ Video Cable Mounting Hardware Video Cable Available for SUV & RV Applications 1 Year Warranty Included THIS IS A BRAND-NEW MODEL NIGHT VISION CAMERA AND WILL WORK WITH KENWOOD DDX392,....; THIS ITEM IS NOT MANUFACTURED BY KENWOOD, ITEM RECEIVED MAY DIFFER SLIGHTLY FROM THE PICTURES SHOWN. ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera 7.0 Inches TFT LCD Rear view mirror Monitor with rearview Night vision camera Aspect Ratio 16:9 Wide Screen Output Standard PAL NTSC Video Input System AV1 AV2 Monitor Features: 1 Absolute MIR-73 7" TFT LCD Color Monitor/ Rear-View Mirror Rear-view Mirror with Monitor Built-in 7" TFT LCD Monitor Dual video inputs PAL/NTSC Compatible Resolution:480 x R.G.B. x 234 pixels Auto switching for color systems (PAL and NTSC) Requires a 12V DC power supply When powered off, the display becomes a full mirror OSD (On-Screen Display) menu for customization Includes a wireless remote control Dimensions: 9-7/8"W x 1"D x 4-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Camera Features: 1 Absolute CAM-600 Wide Angle Rear View CMD Color Back UP Camera with Infrared Night Vision License Plate Mount Finish: Black color Universal rearview camera (reversed image) System: NTSC Designed for night vision applications (infrared LED) Camera built into the water-resistant case Waterproof: IP67- IP68 Resolution: 420 lines Scanning System: 2:1 Interlace Effective Pixel: 510x462 pixels Electronic Shutter: 1/60-1/15,000 sec. Minimum Illumination: 0.2Lux/F1.8 (0 lux with LED) Power Range: 10.5 -14.4 volts Video output:1.0Vp-p, 75 Ohms Lens: 2.8mm / 120 Degrees Angle View S/N ratio of more than 48 dB 120* Degree Wide viewing angle Video connection with RCA composite cable Requires power and ground for operation ⚠️Warning:This product can expose you to [name of chemical], which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera Absolute CAMPACK-700 7.0 Inches TFT/LCD Rear View Mirror Monitor with Rear View Night Vision Camera 7.0 Inches TFT LCD Rear view mirror Monitor with rearview Night vision camera Aspect Ratio 16:9 Wide Screen Output Standard PAL NTSC Video Input System AV1 AV2 Monitor Features: 1 Absolute MIR-73 7" TFT LCD Color Monitor/ Rear-View Mirror Rear-view Mirror with Monitor Built-in 7" TFT LCD Monitor Dual video inputs PAL/NTSC Compatible Resolution:480 x R.G.B. x 234 pixels Auto switching for color systems (PAL and NTSC) Requires a 12V DC power supply When powered off, the display becomes a full mirror OSD (On-Screen Display) menu for customization Includes a wireless remote control Dimensions: 9-7/8"W x 1"D x 4-1/2"H Authorized Internet Dealer 1-year Manufacturer's Warranty Camera Features: 1 Absolute CAM-600 Wide Angle Rear View CMD Color Back UP Camera with Infrared Night Vision License Plate Mount Finish: Black color Universal rearview camera (reversed image) System: NTSC Designed for night vision applications (infrared LED) Camera built into the water-resistant case Waterproof: IP67- IP68 Resolution: 420 lines Scanning System: 2:1 Interlace Effective Pixel: 510x462 pixels Electronic Shutter: 1/60-1/15,000 sec. Minimum Illumination: 0.2Lux/F1.8 (0 lux with LED) Power Range: 10.5 -14.4 volts Video output:1.0Vp-p, 75 Ohms Lens: 2.8mm / 120 Degrees Angle View S/N ratio of more than 48 dB 120* Degree Wide viewing angle Video connection with RCA composite cable Requires power and ground for operation ⚠️Warning:This product can expose you to [name of chemical], which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Absolute CAM870 170° CMOS Car Rear View Backup Camera Reverse HD Night Vision Waterproof CAM Kit HD car reversing camera for your auto is unlike any car other reversing camera. The product is perfect for the car, MPV, VAN, Truck, or Lorry, with color and LED vision, supply good picture on your screen. It's very necessary for us to install a camera at the back of the car, especially for the new driver, keep a keen eye on the rear of the vehicle with this car rear camera, you can judge the distance behind the car, and the wide-angle view allow you watch widely, it's a fabulous solution to get rid of poor visibility in your car, Really convenient for using. General Features: Wide-Angle Rearview CMOS Sensor Color Backup Camera With Night Vision Smallest Universal Camera Finish: Black Universal Rearview Camera (Reversed Image) System: NTSC Designed for Night Vision Applications Camera Built Into Water-Resistant Case Waterproof: IP67- IP68 Resolution: 380 Lines Scanning System: 2:1 Interlace Effective Pixel: 628 X 582 Pixels Electronic Shutter: 1/60-1/15,000 Sec. Minimum Illumination: 0.2lux/F1.8 Power Range: 10.5 -14.4 Volts Video Output:1.0vp-P, 75 Ohms Lens: 2.8mm / 170 Degrees Angle View S/N Ratio More Than 48 Db Includes Mounting Hardware 170 Degree Wide Viewing Angle Minimum Illumination: 0.1 Lux Video Connection With RCA Composite Cable Requires A Power And Ground For Operation Dimensions: 1/2"W X 1 1/8"H X 1"D Weight: 0.25 Lbs. Designed And Engineered In The USA 2-Year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Absolute CAM870 170° CMOS Car Rear View Backup Camera Reverse HD Night Vision Waterproof CAM Kit HD car reversing camera for your auto is unlike any car other reversing camera. The product is perfect for the car, MPV, VAN, Truck, or Lorry, with color and LED vision, supply good picture on your screen. It's very necessary for us to install a camera at the back of the car, especially for the new driver, keep a keen eye on the rear of the vehicle with this car rear camera, you can judge the distance behind the car, and the wide-angle view allow you watch widely, it's a fabulous solution to get rid of poor visibility in your car, Really convenient for using. General Features: Wide-Angle Rearview CMOS Sensor Color Backup Camera With Night Vision Smallest Universal Camera Finish: Black Universal Rearview Camera (Reversed Image) System: NTSC Designed for Night Vision Applications Camera Built Into Water-Resistant Case Waterproof: IP67- IP68 Resolution: 380 Lines Scanning System: 2:1 Interlace Effective Pixel: 628 X 582 Pixels Electronic Shutter: 1/60-1/15,000 Sec. Minimum Illumination: 0.2lux/F1.8 Power Range: 10.5 -14.4 Volts Video Output:1.0vp-P, 75 Ohms Lens: 2.8mm / 170 Degrees Angle View S/N Ratio More Than 48 Db Includes Mounting Hardware 170 Degree Wide Viewing Angle Minimum Illumination: 0.1 Lux Video Connection With RCA Composite Cable Requires A Power And Ground For Operation Dimensions: 1/2"W X 1 1/8"H X 1"D Weight: 0.25 Lbs. Designed And Engineered In The USA 2-Year Manufacturer's Warranty ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov