Alpine (911)

2 Alpine R-SB10V Pre-Loaded R-Series 10-inch Sub Enclosures + KTX-H10 Linking Kit Alpine R-SB10V Pre-Loaded R-Series 10-inch Subwoofer Enclosure Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: Includes R-W10D4 wired in parallel 750W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Authorized Dealer 1-year Warranty Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTX-H10 Linking Kit Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures with ProLink, Heavy-duty steel front and rear linking brackets for connecting two Alpine Halo 10" subwoofer enclosures Add more bass to your sound system with the Linking Kit for Dual 10" Alpine Halo Preloaded Subwoofer Enclosures, featuring Alpine's new ProLink™ technology. General Features: Aluminum rear link plate 10-inch Front ABS / Steel reinforced the port link Center link stabilizing dowels Alpine logo plate All hardware included Authorized Internet Dealer What is in the KTX-H10 box: Front port-link Two 9" front port braces 23.25" Rear link-plate Four 25mm hex-socket screws Eight 14mm hex-socket screws Four 20mm threaded alignment posts 3mm Allen-key Installation instructions Safety warnings KTX-H10 Linking Kit owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine S-S65C 480W Peak (160W RMS) 6.5" Component Type  S-Series  2-way Component Speaker set with 1" Silk TweetersEFFICIENT PERFORMANCEThe S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.HAMR SURROUNDAlpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows for an even unfolding of the surround which creates incredible linearity and colorization rejection.General Features: 6-1/2" S Series 2-way Component System Car Speakers Power Handling: Polypropylene-Mica cone material Rubber speaker surround 1" Silk Dome Tweeters H.A.M.R. (High Amplitude Multi-Roll) surround First Carbon Fiber Reinforced Plastic (CFRP) 1.38" Voice coil magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 22000 Hz Sensitivity: 88 dB Speaker grilles are sold separately Authorized Internet Dealer 1-year Manufacture Electronix Warranty What is in the S-S65C package: S-S65C owner's manual 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws Eight 5/8" Screws 8 Speed-clips 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp and Wiring - This bundle includes a pair of Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers, a pair of Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way Speakers, an Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine X-S65C X-Series 6.5 Inch Component 2-Way SpeakersCTA-2031 Specifications: 120W RMS, 360W Peak, 4 Ohm General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way SpeakersSPECIFICATIONSWoofer: 6-1/2" coneTweeter: 1" Carbon GraphiteMaximum Peak Power: 330 WattsMaximum RMS Power: 110 Wattsimpedance: 4 ohmsSensitivity: 89 dB SPL (1W @ 1m)Frequency Response: 55 Hz to 50 kHzMounting Depth/Drop-in Mounting: 2-5/16- (5.9cm)Cutout Diameter: 5-13/32- (13.7cm) circleRecommended Amplification: up to 110 watts RMS per channelWarning: Both products contain a high-performance tweeter. If there is a tweeter already installed in your car, then you must disconnect its terminals. If you leave the original tweeter connected and connect this product in parallel, then a fault may develop in this product, so you are strongly recommended not to do so. Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the X-A70M package: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet X-A70M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine Type-X Bundle 2-Pair X-S65C 6.5" Component Speaker, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit Alpine Type-X Bundle 2-Pair X-S65C 6.5" Component Speaker, X-A70F 700W 4-Ch Amp, and Wiring - This bundle includes a pair of Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers, an Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine X-S65C X-Series 6.5 Inch Component 2-Way SpeakersCTA-2031 Specifications: 120W RMS, 360W Peak, 4 Ohm General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet Alpine X-A90M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine Type-X Bundle 2-Pair X-S65C 6.5" Component Speaker, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit Alpine Type-X Bundle 2-Pair X-S65C 6.5" Component Speaker, X-A70F 700W 4-Ch Amp, and Wiring - This bundle includes a pair of Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers, an Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier, a wiring kit, a pry kit, and an Alpine cozy.Alpine X-S65C X-Series 6.5 Inch Component 2-Way SpeakersCTA-2031 Specifications: 120W RMS, 360W Peak, 4 Ohm General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet Alpine X-A90M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the X-A70M package: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet X-A70M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov