Alpine (861)

Alpine S-A55V S-Series 5-Channel Class D Amplifier 540W RMS The Alpine S-Series Sound ComponentsThree new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel, and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers. S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. General Features: 5-channel Class D Amplifier Power Output: 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms CTA-2006 compliant Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel Variable bass boost (0-12 dB at 50 Hz) on a subchannel Optional RUX-KNOB.2 wired remote level control for a subchannel Preamp and speaker-level inputs speaker wire to RCA adapter required for speaker-level input Wiring and hardware not included with amplifier 4-gauge power and ground leads recommended Fuse rating: 30A x 2 Dimensions: 11-1/4" W x 2-1/4" H x 8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 5-Channel amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine S-A55V owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine R-A75M R-Series Class D Monoblock Subwoofer Amplifier 750 Watts RMS HI-RESOLUTION AUDIO COMPLIANT The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant. THE LOUDEST FAMILY ON THE BLOCK The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. General Features: R-Series Class D Monoblock Subwoofer Amplifier Power Output: 500 watts RMS x 1 @ 4 ohms 750 watts RMS x 1 @ 2 ohms CTA-2006 compliant Variable low-pass filter (50-400 Hz, 24 dB/octave) Variable bass boost (0-12 dB at 50 Hz) Variable subsonic filter (min-40 Hz, 24 dB/octave) We recommend the Alpine RUX-KNOB.2 if you are looking for a remote bass knob for Alpine Amplifiers Preamp and speaker-level inputs Speaker wire to RCA adapter required for speaker-level input - we recommend the Rockford Fosgate RFI2SW preamp outputs wiring and hardware not included with amplifier 4-gauge power and ground leads recommended - get the NVX XAPK4 for this Fuse rating: 40A x 2 Dimensions: 9" W x 2-1/16" H x 7-1/8" D Authorized Dealer 1-year Manufacturer's Warranty What's in the R-A75M package: Mono subwoofer amplifier Two 40-amp ATO fuses 4 Mounting feet Four 3/4" Screws Eight M2.5x5.5mm Machine screws 2mm Allen wrench 3mm Allen wrench Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine R-A75M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features: Alpine X-Series X-A90V Class-D Full Range 2 ohm Stable 5-Channel Amplifier RMS Power Rating: 4-channel side 4 ohms: 75 watts x 4 channel 2 ohms: 100 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 200 watts x 2 channel Subchannel 4 ohms: 300 watts x 1 chan. 2 ohms: 500 watts x 1 chan. 1 ohm: ------------N/A------------ Total power output: 900 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote bass level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 5/3 channel operation Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .5 - 10V Low level: .2 - 4V Frequency Response: 4-channel: 10 - 60,000Hz Sub-channel: 8 - 400Hz Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >105dB Variable high-pass filter: 50 - 400Hz, -24dB/octave Variable low-pass filter: 50 - 400Hz, -24dB/octave Subsonic filter: 8 - 40Hz Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 30A x 3 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the box: -Channel amplifier Three 30A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 3 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet Alpine X-A90V owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine R-A60F R-Series 4-Channel Power Density Amplifier 600 Watts RMSHI-RESOLUTION AUDIO COMPLIANT The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., originally launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant. THE LOUDEST FAMILY ON THE BLOCK The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience. General Features: Alpine R-A60F Alpine R-Series 4-Channel Power Density Amplifier RMS Power Output: 100 Watts x 4 @ 4 Ohm 150 Watts x 4 @ 2 Ohm 300 Watts x 2 @ 4 Ohms Bridged Class-D Amplifier Frequency Response: 15 Hz - 45 kHz S/N ratio: 87dB (ref: 1W into 4 ohm), >106dB (ref: rated power into 4 ohm) Only 46-degrees of phase shift Hi-Resolution Audio Compliant Designed to match perfectly with the R-Series subwoofers (12, 10, and 8-inch sizes available) and the new R-Series speakers. Fuse Rating: 30A x 2 Approximate Weight: 11 lbs Dimensions: 10-3/4" W x 2-1/16" H x 10" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 4-Channel amplifier Two 30-amp ATO fuses (installed) 4 Mounting feet Four 3/4" Screws Eight M2.5x5.5mm Machine screws 2mm Allen wrench 3mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine R-A60F owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine X308U In-dash Bluetooth Car Stereo 8" Touchscreen with Built-in Navigation, Apple CarPlay, & Android Auto The X308U Mech-Less Navigation Receiver allows you to access the latest smartphone integration technology with the benefit of a secure and dependable built-in navigation system. RELIABLE NAVIGATION ANYWHEREWhether driving in the city or taking your vehicle off-roading, you can choose between smartphone navigation or, when you lose service, the X308U’s embedded navigation to get you to your next adventure.Choose from different intuitive map view options, such as 3D mapping, split map, and turn-by-turn arrow view. During navigation, use multi-touch, pinch-to-zoom motions on your screen for a detailed view of your map. Now there are more ways than ever to get you to your next adventure. General Features: Alpine X308U In-Dash Receiver CEA-2006 compliant amplifier Power Output: Peak: 50 watts x 4 channels RMS: 18 watts x 4 channels 8" Touchscreen WVGA High-Resolution Display with Swipe User Interface and Anti-Glare Screen MP3 ID3 Tag Display (Title/Artist/Album) AM/FM tuner with 18FM/12 AM presets Remote control included Keep factory controls with iDatalink® Maestro® Module 4-Way Swipe Action Control Touchscreen Alpine Connect App compatible Authorized Dealer 1-year Manufacturer's Warranty Navigation Features: Quick Place Search 3D,2D, and Split-Map View Options Turn-by-turn Instructions with Text-to-Speech (TTS) Technology HERE Map Data of the USA, Canada, Alaska, Hawaii, Puerto Rico, and the Virgin Islands Latest Map Update Guarantee Playback and Audio Features: MP3/WMA/AAC/FLAC Playback via USB 24-bit DAC Built-In Digital HD Radio® BassEngine SQ adjusts bass characteristics for different types of music Compatible with Apple iPhone 6/6+ and iOS 8 software 9-band parametric equalizer with seven selectable tone curves (Front, Rear, Front, and Rear USB) Input 3 Sets of 4V preamp outputs (front, rear, and subwoofer) Include an add-on DVD Player to add playback for CD audio, MP3, WMA, MPEG2 AAC, MPEG4 AAC, WAV, DVD-Video, DVD-VR, and Video CD. Alpine DVE-5300 Sold Separately Bluetooth Features: Built-in Bluetooth technology for hands-free talking and audio streaming Bluetooth version 3.0 +EDR certified Bluetooth Profiles Supported: HFP: Hands-Free Profile allows a hands-free car kit to connect to a compatible mobile phone PBAP: Phone Book Access Profile allows the car stereo to display the name of the incoming caller, as well as access the contact list of the mobile phone directly from the car stereo A2DP: Advanced Audio Distribution Profile allows high-quality audio to be streamed from an audio device to the car stereo AVRCP: Audio/Video Remote Control Profile supports basic remote control functions (play, pause, etc.) via Bluetooth OPP: Object Push Profile for sending basic "objects" such as pictures and other virtual material SPP: Serial Port Profile provides a wireless replacement for RS-232-based serial communications Works with most Bluetooth-enabled cell phones. Includes a built-in microphone for clear, convenient, distortion-free talking Maximum communication rage: 32.8 feet (approx, line of sight) Expandability Options: SiriusXM Satellite Radio Ready: SiriusXM SXV300v1 and subscription required, sold separately HD Radio Built-in Steering Wheel Control Ready: PAC ControlPRO or the Axxess ASWC-1 required and sold separately Dedicated Backup Camera Input: Used for universal rear view cameras with an RCA composite input. Rear RCA Video Output: Used for connection to separate monitors and other devices Rear RCA Audio/Video Input: Connecting video accessories such as game consoles, video cameras, etc. 1 HDMI input and 1 HDMI output What's in the X308U package: X308U owner's manual Navigation receiver w/ integrated 8" LCD touchscreen Wiring harness Pre-out harness Mic/SWC harness iDatalink/Aux/Camera harness Camera input adapter 5' USB extension cable GPS antenna Microphone Mic bracket Two-sided tape Self-adhesive pad 3 Cable-clips 4 Pan-head machine screws  4 Countersunk machine screws  HDMI connector-clamp Quick Reference Guide Installation Manual Online Registration Sheet ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine DVR-C320R WiFi & GPS Enabled Stealth Dash Camera HD Video RecordingThe DVR-C310R Dash Camera and DVR-C320R Stealth Dash Camera come with full HD picture quality and high dynamic range (HDR) with automatic exposure and white balance adjustment for clear video imaging. A clear image ensures the highest quality recording, which is vital for accident footage and license plate capture in the event of an accident. Drivers can choose between driving, parking, and all-time recording modes based on preference. During driving mode, the camera’s sensor will record and document an impact during an accident five seconds before or after. Parking mode will record an accident, such as a rear-end, ten seconds after it occurs. Wi-Fi and GPS CapabilityGPS capability is available in the DVR-C310R Dash Camera (sold separately) and is included in the DVR-C320R Stealth Dash Camera solution. The GPS will record and document proof of speed while driving in the event of an accident or traffic violation. The Wi-Fi-enabled Dash cameras can quickly adjust, view, and transfer recording files from the camera database to a smartphone or PC app to avoid data loss in emergencies or to document speed in the event of an accident or traffic violation. Rear Camera CapabilityA second rear-view camera is included for various use cases. Popular for rideshare service drivers, the rear-view camera can monitor and record internal cabin activity. It can also record external vehicle activity, and capture rear-end accidents.General Features: Direct Connection to select Alpine AVN/AV Systems HD Video Recording Night Vision Impact Recording (Moving and Stationary) Rear Camera Included App and PC Viewer Ready Wi-fi Enabled GPS Enabled Authorized Dealer 1-year Factory Warranty What is in the DVR-C320R package: DVR-C320R owner's manual Dash camera Rear camera 32GB microSD card microSD-to-SD card adapter 12-Volt power adapter 12' Wiring harness 8' micro USB-to-2.5mm cable 19.5' Extension cable  3 Self-adhesive clips Quick Reference Guide "Alpine Mobile View App" note Warranty Information Online Registration Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine ILX-W670 7 Inch Mechless Ultra-shallow AV System with Apple Carplay, Android Auto The new swipe control interface is designed for easy use so that you can keep your eyes on the road. A two-finger swipe motion moving up, down, left, or right will control volume up or down and track skip forward or back. The two-finger swipe can be done anywhere on the touch screen, so you don’t need to swipe at a specific location. The iLX-W670 “Works with Apple CarPlay” lets iPhone users make and receive calls, access text messages, play music, and get directions in a way that allows them to stay focused on the road. Apple CarPlay is accessed through the capacitive touch screen or the mic button to activate Siri's voice control and is compatible with iPhone 5 and later (iPhone must be connected via Apple lightning cable). The ILX-W670 includes Android Auto and works with the Google Assistant (requires both a USB cable and Bluetooth® connection; requires an Android™ phone running 5.0 [Lollipop] or higher and the Android Auto app). To access the Google Assistant on Android Auto, say "OK Google" or select the mic button. Google Assistant in Android Auto allows users to play their favorite music, get driving directions to their destination, interact with smart home devices, and reply to text messages – hands-free. General Features: Power Handling: Peak: 50 watts x 4 channels Power Handling: RMS: 16 watts x 4 channels 7-inch anti-glare capacitive touchscreen NEW two-finger swipe user interface Works with Apple CarPlay® Works with Android Auto™ and the Google Assistant Works with Pandora® Music for iPhone® and Android™ phones  AM/FM tuner with 24FM/12 AM presets The amplifier measures just 7” W x 3.5” H x 1.25” D and fits in the open space behind the iLX-W650 using the included bracket, creating the PowerStack design. Authorized Dealer 1-year Manufacturer's Warranty Navigation Features: Use with Apple CarPlay or Android Auto Playback and Audio Features: Mechless Digital Media Receiver: No CD mechanism means you have less to carry. Stream your music digitally! FLAC/MP3/WMA/AAC/HE-AAC music playback via USB 9-band parametric equalizer with selectable tone curves Rear USB Input CEA-2006 compliant amplifier Bluetooth Features: Built-in Bluetooth technology for hands-free talking and audio streaming Bluetooth Profiles Supported: HFP: Hands-Free Profile allows a hands-free car kit to connect to a compatible mobile phone PBAP: Phone Book Access Profile allows the car stereo to display the name of the incoming caller, as well as access the contact list of the mobile phone directly from the car stereo A2DP: Advanced Audio Distribution Profile allows high-quality audio to be streamed from an audio device to the car stereo AVRCP: Audio/Video Remote Control Profile supports basic remote control functions (play, pause, etc.) via Bluetooth Works with most Bluetooth-enabled cell phones Expandability Options: Combine with the Alpine KTA-450 Power Pack Amplifier (sold separately) for a PowerStack installation. The combined depth of the Alpine ILX-W650, KTA-450, and mounting brackets is still less than the depth of a standard 2-DIN chassis Steering Wheel Control Ready: PAC ControlPRO or the Axxess ASWC-1 required and sold separately Three 4-volt pre-outs allow aftermarket speakers, subwoofers, additional amplifiers, and sound processors to be added Two camera inputs allow for the addition of multiple cameras, including a rear-view camera (sold separately).  SiriusXM-Ready™ (SXV300 Connect Vehicle Tuner Kit and subscription required, sold separately) What is in the iLX-W670 Package: iLX-W670 owner's manual Digital media receiver Wiring harness Preout/Camera harness 42" USB extension cable Microphone Bracket 4 ISO-screws Quick Reference Guide Registration Card Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine HCE-C2600FD Front Camera Universal Weather Resistant HDR Front View Camera Alpine HCE-C2600FD Universal Weather Resistant HDR Front View CameraThis all-new front-view HDR camera system provides parking safety with cutting-edge camera technology and full touch-screen operation.Thanks to HDR technology, the picture quality is much better compared to regular camera systems - for easier maneuvering and greater safety.A wide viewing range provides better visibility when coming out of ‘blind’ alleys or around obstructed corners. Especially useful for reducing blind spots with SUVs, minivans or trucks.There is a choice of three viewing modes.General Features Universal Front View Camera New HDR Technology! Make sure you can see, no matter how bright or dark the surrounding lighting looks Eliminates washed out images or views that are too dark to see Fast exposure adjustment makes it easier to see when going from bright environments to dark, or vice versa Three viewing modes (panorama, corner, and ground) with select Alpine head units Helpful for parking, but also great on off-road trips Mounting Style: Remote Mount IP68 Weather and dustproof Viewing Angle: 180° Waterproof: Yes Nightvision: Yes Resolution: 640 x 380 pixels Dimensions (Camera): .9"D x .9"W x .9"H Operating Temp.: -22°F (-30°C) to 158°F (70°C) Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Front-view camera (attached 39" harness terminated by 7-pin harness) 10' Power/Video harness (with a female 7-pin connector on one end and a male 6-pin connector on other ends) 2-Piece mounting bracket 4 Machine screws 4 Self-tapping screws 5 Wire-clips Alpine HCE-C2600FD owner's manual

Alpine INE-W987HD Double DIN Bluetooth Car Stereo with Built-in 2D/3D GPS Navigation, Apple CarPlay, & Android Auto The INE-W987HD Mech-Less Navigation Receiver allows you to access the latest smartphone integration technology with the benefit of a secure and dependable built-in navigation system. PINCH-TO-ZOOM FOR FASTER PERFORMANCE The INE-W987HD has been redesigned to work faster than ever, making the user interface much more responsive. No matter the feature you’re looking for, you’re just one swipe away with faster scrolling and screen transitions all on a 7-inch, anti-glare touchscreen. Use the INE-W987HD’s intuitive interface to swipe left, right, up, or down for navigation, entertainment sources, settings, or Bluetooth, respectively. While using the navigation feature, use pinch-to-zoom motions to zoom in on the view of your map for improved navigation. Access the functions that you use the most in a fast and easy way with the My Favorites feature. Using a shortcut soft key on the touch screen, add, delete, or re-arrange your shortcut icons by dragging the icons to a new location on the screen. Your settings are kept as a personal profile linked to your smartphone via Bluetooth. You can also use the hard keys for direct access to features like built-in navigation and Apple CarPlay or Android Auto’s navigation screen. Access the music on your AM/FM radio or one of your favorite apps on your smartphone with just one touch of the Audio hard key. Control your vehicle’s accessories conveniently from the INE-W987HD’s touchscreen. If you upgraded your vehicle with a winch, lights, air suspension, or a motorized tonneau cover, add a KAC-001 (sold separately) to connect and control up to eight relay-connected accessories. NAVIGATION THAT WORKS EVERYWHERE Whether you’re driving in the city or taking your vehicle off-roading, you can choose between smartphone navigation, or when you lose service, the INE-W987HD’s embedded navigation to get you to your next adventure. General Features: Alpine INE-W987HD In-Dash Receiver CEA-2006 compliant amplifier Power Output: Peak: 50 watts x 4 channels RMS: 18 watts x 4 channels 7" Touchscreen WVGA High-Resolution Display with Swipe User Interface and Anti-Glare Screen MP3 ID3 Tag Display (Title/Artist/Album) AM/FM tuner with 18FM/12 AM presets 1 HDMI input and 1 HDMI output Keep factory controls with iDatalink® Maestro® Module 4-Way Swipe Action Control Touchscreen Alpine Connect App compatible Built-In Digital HD Radio® Authorized Dealer 1-year Manufacturer's Warranty Navigation Features: Quick Place Search 3D,2D, and Split-Map View Options Turn-by-turn Instructions with Text-to-Speech (TTS) Technology HERE Map Data of the USA, Canada, Alaska, Hawaii, Puerto Rico, and the Virgin Islands Latest Map Update Guarantee Playback and Audio Features: FLAQ, AAC, MP3, WMA, HE-AAC Playback via USB Compatible with Apple iPhone 6/6+ and iOS 8 software 9-band parametric equalizer with 7 selectable tone curves (Front, Rear, Front and Rear USB) Input 3 Sets of 4V preamp outputs (front, rear, and subwoofer) Include an add-on DVD Player to add playback for CD audio, MP3, WMA, MPEG2 AAC, MPEG4 AAC, WAV, DVD-Video, DVD-VR, and Video CD. Alpine DVE-5300 Sold Separately Bluetooth Features: Built-in Bluetooth technology for hands-free talking and audio streaming Bluetooth version 3.0 +EDR certified Bluetooth Profiles Supported: HFP: Hands-Free Profile allows a hands-free car kit to connect to a compatible mobile phone PBAP: Phone Book Access Profile allows the car stereo to display the name of the incoming caller, as well as access the contact list of the mobile phone directly from the car stereo A2DP: Advanced Audio Distribution Profile allows high-quality audio to be streamed from an audio device to the car stereo AVRCP: Audio/Video Remote Control Profile supports basic remote control functions (play, pause, etc) via Bluetooth OPP: Object Push Profile for sending basic "objects" such as pictures and other virtual material SPP: Serial Port Profile provides a wireless replacement for RS-232 based serial communications Works with most Bluetooth enabled cell phones Includes a built-in microphone for clear, convenient, distortion-free talking Maximum communication rage: 32.8 feet (approx, line of sight) What's in the box: Navigation receiver w/ integrated 7" LCD touchscreen Trim-ring Wiring harness Pre-out harness Mic/SWC harness iDatalink/Aux/Camera harness Camera input adapter 5' USB extension cable GPS antenna (w/ attached 8' cable) Microphone (w/ attached 12.5' cable) Mic bracket Two-sided tape Self-adhesive pad 3 Cable-clips 4 Pan-head machine screws (M5x8mm) 4 Countersunk machine screws (M5x8mm) HDMI connector-clamp Quick Reference Guide Installation Manual Online Registration Sheet Alpine INE-W987HD owner's manual “It is unlawful to drive a motor vehicle equipped with a television receiver, a video monitor, or a television or video screen, or any other similar means of usually displaying a television broadcast if the receiver is located in the vehicle at any point forward of the back of the driver’s seat. GPS navigation systems mountable on the windshield or the dashboard are permitted, as are systems designed to prevent the driver from viewing them. There is also an exemption for video event recorders that can monitor driver performance if mounted in specific locations. Please check your local laws for additional details. Please drive safely!” Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S2-S65 6.5" 480 Watt Car Audio Speakers+BBX-F1200 4 Channel Amplifier + Absolute KIT4 4G Amp Kit Alpine S2-S65 120W 6.5" 2-Way Type-E Coaxial Car Speakers w/ Silk Tweeters Hearing is BelievingStep up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers for the performance-packed sound quality you expect from Alpine.Quality over QuantityJust because you want better sound in your car doesn’t mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you need replacement speakers or want to start building a sound system.Soft Dome Tweeter TechnologyTo output quality sound, the Type-E speakers are developed using soft dome tweeters rather than traditional cone-type tweeters, which can be harsh. This results in a more enjoyable listening experience in the car when playing back music or other entertainment over your sound system.General Features: 6-1/2" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Hi-Res Audio-certified Polypropylene, Glass Fiber, and Mica cone material High-Amplitude Multi-Roll (HAMR) speaker surround 1" Cloth Dome tweeters voice coil Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 40,000 Hz Sensitivity: 88 dB Speaker grilles are optional and sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Alpine S2-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/8" Screws Eight M4x6.5mm Machine screws with split lock washers attached Eight M4 Nuts 6 Flat washers Warranty information Online product registration information Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty. Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme Installing a car amplifier is already enough of a job without worrying about where to find the correct wire and installation accessories. You might not know that some companies are playing gimmicks, and you could get ripped off! Today, I recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels great, works great, and is much better than the typical 18 AWG wire most kits would consist of. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable Three ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine S2-S65 6.5" 480 Watt Car Audio Speakers+BBX-F1200 4 Channel Amplifier + Absolute KIT4 4G Amp Kit Alpine S2-S65 120W 6.5" 2-Way Type-E Coaxial Car Speakers w/ Silk Tweeters Hearing is BelievingStep up your factory speakers to an affordable upgrade with the all-new Alpine Type-E speakers for the performance-packed sound quality you expect from Alpine.Quality over QuantityJust because you want better sound in your car doesn’t mean you have to break your budget. The Type-E speakers are the perfect, affordable option if you need replacement speakers or want to start building a sound system.Soft Dome Tweeter TechnologyTo output quality sound, the Type-E speakers are developed using soft dome tweeters rather than traditional cone-type tweeters, which can be harsh. This results in a more enjoyable listening experience in the car when playing back music or other entertainment over your sound system.General Features: 6-1/2" S Series 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each RMS Power Handling: 160 watts per pair / 80 watts each Hi-Res Audio-certified Polypropylene, Glass Fiber, and Mica cone material High-Amplitude Multi-Roll (HAMR) speaker surround 1" Cloth Dome tweeters voice coil Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 70 - 40,000 Hz Sensitivity: 88 dB Speaker grilles are optional and sold separately Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Alpine S2-S65 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/8" Screws Eight M4x6.5mm Machine screws with split lock washers attached Eight M4 Nuts 6 Flat washers Warranty information Online product registration information Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty. Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme Installing a car amplifier is already enough of a job without worrying about where to find the correct wire and installation accessories. You might not know that some companies are playing gimmicks, and you could get ripped off! Today, I recommend KIT4 for all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels great, works great, and is much better than the typical 18 AWG wire most kits would consist of. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable Three ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire Six ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

2 Alpine R-S65.2 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers with 20' Speaker Wire Package TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with in-line, passive design, and reduced footprint, which contributes to easier installation. General Features: 6-1/2" 2-way car speakers (pair) carbon-fiber-reinforced polymer (CFRP) woofer carbon-fiber-reinforced polymer dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency response: 65-40,000 Hz sensitivity: 88 dB top-mount depth: 2-5/8" grilles included Authorized Dealer 1-year Manufacturer's Warranty What is in the box: Two 2-way Speakers Two 6-1/2" Adapter rings (includes GM/Chrysler) 2 Grilles 2 Grille badges Eight 1-1/8" Screws Eight M4x12mm Machine screws 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box Alpine R-S65.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Alpine R-S65.2 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers TURN IT UP WITHOUT TURNING DOWN SOUND QUALITY If you play your music loud and want others to know, the R-Series speakers match you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, delivering power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil, allowing more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling for superior control and output. The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with in-line, passive design, and reduced footprint, which contributes to easier installation. General Features: 6-1/2" 2-way car speakers (pair) carbon-fiber-reinforced polymer (CFRP) woofer carbon-fiber-reinforced polymer dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency response: 65-40,000 Hz sensitivity: 88 dB top-mount depth: 2-5/8" grilles included Authorized Dealer 1-year Manufacturer's Warranty What is in the box: Two 2-way Speakers Two 6-1/2" Adapter rings (includes GM/Chrysler) 2 Grilles 2 Grille badges Eight 1-1/8" Screws Eight M4x12mm Machine screws 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box Alpine R-S65.2 owner's manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Pair ALPINE R-S65.2 300w 6.5" Coaxial+Pair ALPINE R-S65C.2 Component Speakers+Alpine R-A60F Amplifier + Absolute KIT4 4 Gauge Amp Kit Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers If you play your music loud and want others to know, the R-Series speakers match you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. General Features: 6.5-inch R-Series Component 2-way Car Speakers the component speaker system includes two woofers, 2 tweeters, and 2 external crossovers Power Handling: Peak: 300 watts RMS: 100 watts 4 Ohms impedance Frequency response: 65Hz-40kHz Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology CFRP increases the speakers’ mid-bass performance and dynamic range CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback Patented High-Amplitude Multi-Roll (HAMR) surround, for control and accuracy Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately) It uses an in-line, passive design with a reduced footprint, which also contributes to easier installation Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 2 Woofers Two 6-1/2" Adapter rings (includes GM/Chrysler) Two 6x8 Adapter rings 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws Eight 1/2" Screws 8 Speed-clips Eight M4x12mm Machine screws Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration note Important Notice sheet Template and specs on the box Alpine R-S65C.2 owner's manual Alpine R-S65.2 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers TURN IT UP WITHOUT TURNING DOWN THE SOUND QUALITY If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, delivering power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. MORE OUTPUT FOR MORE FUN The woofers have a large, 35-millimeter (mm) voice coil, allowing more coil windings to fit in the gap. This results in more excellent heat dissipation and increased power handling for superior control and output.  The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and reduced footprint, contributing to a more straightforward installation. General Features: 6-1/2" 2-way car speakers (pair) carbon-fiber-reinforced polymer (CFRP) woofer the carbon-fiber-reinforced polymer dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency response: 65-40,000 Hz sensitivity: 88 dB top-mount depth: 2-5/8" grilles included Authorized Dealer 1-year Manufacturer's Warranty What is in the box: Two 2-way Speakers Two 6-1/2" Adapter rings (includes GM/Chrysler) 2 Grilles 2 Grille badges Eight 1-1/8" Screws Eight M4x12mm Machine screws 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box Alpine R-S65.2 owner's manual Alpine R-A60F R-Series 4-Channel Power Density Amplifier 600 Watts RMSHI-RESOLUTION AUDIO COMPLIANTThe R-Series amplifiers utilize Alpine’s advanced amplifier platform, which takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology, initially launched in the premium X-Series amplifiers, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant.THE LOUDEST FAMILY ON THE BLOCKThe “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.General Features: Alpine R-A60F Alpine R-Series 4-Channel Power Density Amplifier RMS Power Output: 100 Watts x 4 @ 4 Ohm 150 Watts x 4 @ 2 Ohm 300 Watts x 2 @ 4 Ohms Bridged Class-D Amplifier Frequency Response: 15 Hz - 45 kHz S/N ratio: 87dB (ref: 1W into 4 ohms), >106dB (ref: rated power into 4 ohms) Only 46 degrees of phase shift Hi-Resolution Audio Compliant Designed to match perfectly with the R-Series subwoofers (12, 10, and 8-inch sizes available) and the new R-Series speakers. Fuse Rating: 30A x 2 Approximate Weight: 11 lbs Dimensions: 10-3/4" W x 2-1/16" H x 10" D Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 4-Channel amplifier Two 30-amp ATO fuses (installed) 4 Mounting feet Four 3/4" Screws Eight M2.5x5.5mm Machine screws 2mm Allen wrench 3mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Alpine R-A60F owner's manual Absolute KIT4 Complete PRO Marine 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Red Accent Color Scheme Installing a car amplifier is already enough of a job without worrying about where to find the correct wire and installation accessories. What you might not know is that some companies are using gimmicks, and you could end up getting ripped off! Today, I recommend KIT4 to all DIY and installers. This wiring kit has an easy-to-install AGU fuse holder and some perfect wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would consist of. General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold-plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.