Alpine (861)

2 Alpine R-S69.2 600W Peak, 200W RMS R-Series 6x9 Inch Coaxial 2-Way Speakers R-Series speakers give you power and control. With an innovative material that delivers more output, the speakers produce a dependable performance for a loud and fun experience. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output. General Features: Alpine R-S69.2 R-Series 6x9 Inch Coaxial 2-Way Speakers Power Handling: RMS: 100 Watts Peak: 300 Watts Impedance: 4 Ohm Carbon-fiber reinforced polymer (CFRP) woofer Carbon-fiber reinforced polymer dome tweeter Frequency response: 60 Hz - 40 kHz Sensitivity: 90 dB Top-mount depth: 2-7/8" Grilles included Authorized Dealer 1-year Manufacturer's Warranty What's in the box: Two 2-way Speakers 2 Bottom mount brackets 2 Grilles 2 Grille badges Eight 1-1/8" Screws Eight M4x60mm Machine screws (with split lock washers attached) 8 Split lock washers 8 Flat washers Eight M4 Hex nuts 8 Speed clips Warranty information Important Notice Online product registration information Template and specs on the box Alpine R-S69.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SWT-12S4 12" Bass System with Alpine KTA-30MW Mono Weather Resistant Tough Power Pack Amplifier Alpine SWT-12S4 12" Bass System with Alpine KTA-30MW Mono Weather Resistant Tough Power Pack Amplifier—This bundle includes an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms and an Alpine SWT-12S4 1500W Max Single 12" Sealed Subwoofer Tube Enclosure. Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack will deliver powerful bass output for subwoofers in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Alpine KTA-30MW owner's manual Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W12S4 12" BassLine Series 12" 750W Max (250W RMS) 4-ohm Bass Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W12S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 12-inch single 4Ω subwoofer Polypropylene and mica cone with poly-foam surround Peak Power Handling: 750 watts RMS Power Handling: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelit Ribs (P.W.R.) cone design Frequency Response: 32Hz-200Hz 5-5/16-inch mounting depth Recommended Sealed box volume: 1.09 Cu. Ft. Recommended Ported box volume: 1.91 Cu. ft Bass For All High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Recommended Box Volume: 0.5-1.5 Cu. ft.3 Top-mount depth: 5-5/16" Cutout diameter: 10-5/8" Frequency Response: 22 - 200Hz Sensitivity: 87.9dB Resonance Frequency (Fs): 30 Performance: Efficiency & Tight Bass An optimized magnet circuit allows more focused magnetism in the gap, improving efficiency. This means tighter bass control and more output! What's in the W12S4 package: One 12" Subwoofer Adhesive-backed foam gasket Application Guide Online product registration information Warranty information Important Notice! W12S4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W12S4 12" BassLine Series 12" 750W Max (250W RMS) 4-ohm Bass Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W12S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 12-inch single 4Ω subwoofer Polypropylene and mica cone with poly-foam surround Peak Power Handling: 750 watts RMS Power Handling: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelit Ribs (P.W.R.) cone design Frequency Response: 32Hz-200Hz 5-5/16-inch mounting depth Recommended Sealed box volume: 1.09 Cu. Ft. Recommended Ported box volume: 1.91 Cu. ft Bass For All High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Recommended Box Volume: 0.5-1.5 Cu. ft.3 Top-mount depth: 5-5/16" Cutout diameter: 10-5/8" Frequency Response: 22 - 200Hz Sensitivity: 87.9dB Resonance Frequency (Fs): 30 Performance: Efficiency & Tight Bass An optimized magnet circuit allows more focused magnetism in the gap, improving efficiency. This means tighter bass control and more output! What's in the W12S4 package: One 12" Subwoofer Adhesive-backed foam gasket Application Guide Online product registration information Warranty information Important Notice! W12S4 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4 ohm Car Subwoofer Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design An optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty What's in the  W10S4 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Important Notice! ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Mono Power Pack Amp with Alpine SWT-S10 10" Loaded Tube Subwoofer This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier and an Alpine SWT-S10 1200W Max (250W RMS) Single 10" Sealed Subwoofer Tube Enclosure. Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D), occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. While designed to “stack” behind the iLX-W650, iLX-W670, or similar 2-DIN radio, both amplifiers can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During robust or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit that maintains the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with the amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M package: KTA-200M Owner's Manual Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Warranty information Online product registration information FCC Compliance Statement Alpine SWT-S10 1200W Max Single 10" Sealed Subwoofer Bass Tube Enclosure Combining the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofers in a thin package optimized for tiny enclosures. The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing enormous output to build the ideal sound system for your truck. At 4-1/8” deep. These subs provide deep bass performance where it usually couldn’t fit in a car or truck. The vented pole optimized for a 4-1/8” deep box is the ideal enclosure size, meaning excellent bass performance can fit just about anywhere in your truck. General Features: Single 10" Sealed Subwoofer Tube Enclosure 1200 Watts MAX Power Handling 250 Watts RMS Power Handling Final Impedance: 4 ohms Preloaded with a single 10" Subwoofer Sealed enclosure with embroidered black carpet Enclosure Dimensions: 11.25"W x 23.65" D 1-year Manufacturer's Warranty Subwoofer Features: 10" Passive Subwoofer Push SPK Terminal Frequency Response: 35-200 Hz Sensitivity: 90dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included What is in the SWT-S10 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2 Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch DAlpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch inputAlpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack AmplifierSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N) CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer Alpine KTA-200M Mono Power Pack Amp with Alpine W12S4 12" Subwoofer and Bass Knob - This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine W12S4 12-inch Single 4 Ohm Subwoofer, a pry kit, and an Alpine cozy.Alpine KTA-200M Mono 400-Watt Power Pack AmplifierThe KTA-200M fits in the open space behind Alpines iLX-W650 7-inch Mech-Less (no CD/ DVD) Audio/Video receiver to create Alpines unique PowerStack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. CTA-2006 PowerStack capable with the Alpine iLX-W650 Alpines Class D Amplifier Circuit w/ Dynamic Peak Power (DPP) 100W x 1 RMS (4, 14.4V, 1% THD+N) 200W x 1 RMS (2, 14.4V, 1% THD+N) 400W x 1 DPP (2, 14.4V, 1% THD+N) >85dB S/N (ref. 1W into 4) 0.1% THD+N (ref. 10W into 2) Single-side 22-pin connector RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) Alpine W12S4 12-inch Single 4 Ohm SubwooferOverview: 12-inch single 4 subwoofer 250W RMS 750W peak power handling Frequency Response: 32Hz-200Hz 5-5/16-inch mounting depth Recommended Sealed box volume: 1.09 cu. Ft. Recommended Ported box volume: 1.91 cu. ft Performance: Efficiency & Tight Bass An optimized magnet circuit allows more focused magnetism in the gap which results in improved efficiency. This means tighter bass control and more output! What's in the W12S4 package: One 12" Subwoofer Adhesive-backed foam gasket Application Guide Online product registration information Warranty information Important Notice! W12S4 owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine Type-S Speaker and Amp Bundle 6.5" S2-S65C Component Set & S2-S65 Coaxials & S2-A36F 4 Ch Amplifier & Absolue KIT4 4 Gauge Amp Kit This bundle includes an Alpine S2-36F Amplifier, a pair of Alpine S2-S65C S-Series 6.5-inch Component 2-way Speakers, a pair of Alpine S2-S65 S-Series 6.5-inch Coaxial 2-way Speakers, and a wiring kit. Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench Alpine S2-S65C 480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 480 watts per set / 240 watts on each side RMS Power Handling: 160 watts per set / 80 watts on each side Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Alpine S2-S65 6.5" 480 Watts S-Series Hi-Res Certified 2 Way Coaxial Car Speakers General Features: 6-1/2" 2-way Coaxial Car Speakers Peak Power Handling: 480 watts per pair / 240 watts each Power Handling RMS: 160 watts per pair / 80 watts each Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified Optional Grills KTE-S65G available 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer Weight: ‎6.4 pounds Dimensions, ‎16.5 x 8.5 x 5 inches MFR #: S2-S65 1-year Manufacturer's Warranty Warning: This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver for Jeep 97-02 Dash Kit, Wiring Harness Jeep 97-02 Dash Kit, Wiring Harness and Antenna Adapter with Alpine ILX-W670 7" Shallow-Chassis Multimedia Receiver - This bundle includes an Alpine ILX-W670 Digital Multimedia Receiver with CarPlay and Android Auto Compatibility, a Metra 70-1817 Wiring Harness Compatible with 1984-2005 Chrysler-Plymouth-Dodge-Jeep, a Metra 95-6549 Dash Kit Compatible with 1997-2002 Jeep Wrangler, a pry kit, and a Creative Audio cozy.Alpine iLX-W670 Digital multimedia receiverGeneral Features: digital media receiver with AM/FM tuner (does not play CDs) shallow-mount chassis design (2-7/16" deep) designed to pair with Alpine's KTA-450 power pack amplifier touchscreen swipe controls designed to work with CarPlay and Android Auto hands-free control lets you access apps using your voice built-in Bluetooth connectivity enjoy music apps like Pandora and Spotify built-in amplifier (18 watts RMS CEA-2006/50 peak x 4 channels) USB port accommodates various devices and thumb drives FLAC Compatible 7" capacitive touchscreen Smartphone Features: designed to work with CarPlay and Android Auto built-in iPod, iPhone, and iPad control Android control through USB Metra 70-1817 Wiring Harness Compatible with 1984-2005 Chrysler-Plymouth-Dodge-JeepGeneral Features: Plugs into car harness at radio Provides Power 4 Speaker connection Metra 95-6549 Dash Kit Compatible with 1997-2002 Jeep WranglerGeneral Features: ISO DDIN radio provision Complete the center dash panel for a factory look Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-200M Mono Power Pack Amp with Alpine W10S4 10" Subwoofer The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage-adapting input circuit to maintain the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty Alpine W10S4 10" Bass Subwoofer 750W Max (250W RMS) 10" BassLine Series Single 4-ohm Car Subwoofer Legendary Alpine quality at an affordable price Car audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that will not break the bank. Surround and wattage match made in heaven The 250 watts of continuous power that the W10S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point. General Features: 10" Single 4-ohm BassLine (Bass) Series Subwoofer Power Handling: Peak: 750 watts RMS: 250 watts Recommended power range: 50W - 250W RMS Polypropylene-Mica cone High-excursion poly-foam surround Progressive Wavelet Ribs (P.W.R.) cone design Optional Alpine KTE-10PG subwoofer grill is available and is a wonderful complement to the trim ring with the Alpine logo High-strength custom steel frame 8AWG push terminals 2" voice coil 52oz. magnet Top-mount depth: 5-1/16" Cutout diameter: 9" Frequency Response: 24 - 200Hz Sensitivity: 86.6dB Resonance Frequency (Fs): 32 Authorized Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB12V 12" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers with Amp Wire Kit Description Alpine S-SB12V 12" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers - This bundle includes an Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine cozy.Alpine S-SB12V Pre-Loaded S-Series 12-inch Subwoofer EnclosureSpecifications: Includes S-W12D4 wired in parallel 600W RMS power handling 2 Impedance Ported enclosure design Frequency response: 26-200 Hz Vented enclosure tuning frequency: 35 Hz Dimensions 17-inch W x 14.625-inch H X 15-inchAlpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack AmplifierSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N) CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch/4ch input (selectable) Absolute KIT 4 Wiring Kit   General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provide optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water-resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov  

Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-30MW box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet KTA-30MW owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-200M Amplifier Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-200M Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage adapting input circuit to maintain the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M box: Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Four 8" Zip Ties Owner's Manual (English/ French/ Spanish) Warranty information Online product registration information FCC Compliance Statement KTA-200M Owner's Manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.