00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
Alpine KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
$419.95
$700.95
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the KTA-30MW box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-A90M 900W RMS X-Series Class-D Monoblock 2 ohm Stable Amplifier
$749.95
$999.99
Alpine X-A90M 900 W RMS X-Series Class-D Monoblock 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configurations, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:
Alpine X-Series X-A90M
Class-D Full Range 2 ohm Stable Monoblock Amplifier
RMS Power Rating:
4 ohms: 600 watts x 1 chan.
2 ohms: 900 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
Mono channel operation
Speaker-level (high-level) inputs
Preamp Outputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .4 - 10V
Low level: .1 - 4V
Frequency Response: 8 - 400
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >107dB
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Variable subsonic filter: 8 - 40Hz, -24dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What is in the Package:
Mono amplifier
Two 35A ATO fuses
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
2 Speaker connector plugs
Logo Plate
4 Self-tapping screws
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90M owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
NEW! Alpine KTA-30MW Mono Power Pack Amp
$419.95
$500.00
Alpine KTA-30MW Car Amplifier Mono 300-Watt RMS Weather Resistant Tough Power Pack Amplifier
A TOUGH MINI AMP THAT PACKS A PUNCH
Get big amp performance in a compact, resilient package. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P.), the KTA-30MW Weather Resistant Tough Power Pack is sure to deliver powerful bass output for subwoofers used in those open cab vehicles and toys. This small and efficient amplifier can be installed with an aftermarket or factory head unit while adding up to 600 watts of D.P.P. power. Its weather resistance makes the KTA-30MW a good choice for use in exposed installations like side-by-sides, boats, open-top vehicles, and motorcycle saddlebags.
A SOUND SYSTEM BOOST WITHOUT THE BIG SPACE COMMITMENT
The KTA-30MW is perfect for when you want to add subwoofer power but don’t have space for a large amplifier. It is compatible with an aftermarket or factory head unit and provides up to 600 DPP watts to the subwoofer of your choice.
HALF THE SIZE OF OUR SMALLEST TRADITIONAL AMPLIFIERS
The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue.
General Features:
Alpine KTA-30MW
Class D Monoblock Weather Resistant Power Pack Amplifier
300 Watts RMS X 1 @ 4 Ohms Power Handling
600 Watts RMS X 1 @ 2 Ohms Power Handling
CTA-2006 compliant
Frequency Response: 20-400 Hz
Total Harmonic Distortion (THD): <1%
Signal to Noise Ratio: 83dB
Variable Low Pass filter 50-400Hz @ -24dB/Oct.
Variable Bass Boost (0-12 dB at 50 Hz)
Fuse Rating: 25A
Weather-resistant (IP66 rating)
Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs
Dimensions: 7” W x 3.5” H x 1.25” D
Authorized Dealer
1-year Manufacturer's Warranty
What is in the box:
Mono amplifier
14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends)
4 Self-tapping screws (Length 3/4")
Connection sheet
Limited Warranty sheet
Alpine KTA-30MW owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-A60M 500W V-Power Series Class D Monoblock Digital Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit
$239.95
$349.95
Alpine S-A60M 500W V-Power Series Class D Monoblock Digital Amplifier + Absolute KIT4 4 Gauge Complete Amplifier Kit
Born Tough, Raised Strong
Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked or sounded better. Yes, it is possible to improve upon a good thing.
General Features:
V-Power Series Class D Monoblock Digital Amplifier
RMS Power Rating:
4 ohms: 300 watts x 1 Chan.
2 ohms: 500 watts x 1 Chan.
Max power output: 500 watts x 1 Chan.
Integrated wire and mounting screw terminals
S.T.A.R. circuitry
LED power (blue) and protect (red) indicators
Variable Bass Boost (0 to +12 dB bass boost at 50 Hz)
Optional Alpine RUX-KNOB.2 remote bass knob available
Soft start turn-on
4 or 2 channel operation
4-channel speaker-level inputs
Pre-amp RCA outputs to daisy chain multiple amps
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity: 0.4V - 10V
Non-fading pre-amp output
Variable low-pass filter (50-400 Hz, 24 dB/octave)
CEA-2006 compliant amplifier
Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H
Authorized Dealer
1-year Manufacturer's Warranty
Absolute KIT-4 Complete 4 Gauge Amplifier Kit
Product Features:
Complete 4 Gauge Amplifier Kit
Designed specifically for car audio systems up to 1000 watts
Premium power and ground wire provides optimal power transfer
Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
Terminals are gold-plated for excellent signal transfer
For use in any car, truck, RV, or boat
Package Includes:
17 ft. of red 4 AWG high current power cable
3 ft. of black 4 AWG ground cable
15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
20 ft. of 12 AWG OFC Speaker cable
20 ft. of 16 AWG remote turn-on wire
6 ft. of split loom tubing
1 Gold plated 80 AMP AGU fuse
1 4 AWG gold ring terminal
1 4 AWG water-resistant inline fuse holder
2 Ring terminals
2 Spade terminals (4 gauge)
5 Spade terminals (14-16 gauge)
3 Self-tapping screws
1 Rubber grommet
20 Black cable ties
2 Butt connectors (18-22 gauge)
1 Butt connector (4 gauge)