Alpine 4-Channel Amplifiers (61)

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Absolute KIT0 0 Gauge Amp Kit The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier + Absolute KIT4 4 Gauge Amp Kit The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier The next generation of Alpine S-Series amplifiers is designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. General Features: Hi-Res Audio Certified (Up to 40kHz) Power Rating: 14.4V, < 0.3% THD +N Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω Bridged Power: 180W RMS x 2 @ 4Ω 4-Channel Amplifier Alpine’s Class D Amplifier Circuit Two-sided terminal layout Built-in Selectable/ Adjustable Crossovers Mid-Bass EQ Input for more power Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately) Dimensions: 8.7” W x 2.25” H x 8.25” D Weight: 4 lbs, 13 oz S/N Ratio: >83dB Frequency Response: 20Hz – 40kHz Damping Factor: >100 Owner’s Manual 4 Self-tapping screws Hexagon wrench What is in the S2-A36F package: S2-A36F owner's manual 4-Channel amplifier 2 End caps Four 3/4" screws Four 1/4" screws 2mm Allen key Owner's manual Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine BBX-F1200 600W Max (280W RMS) 2-ohm Stable 4 Channel Class-A/B Amplifier This new BBX amplifier gives you Alpine power performance at a fantastic price. And they’re designed to fit easily in virtually any system. High Power, Great Value This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget. High Pass and Low Pass Filters These two filters let you set the frequency points for the high, mid, and bass ranges to match your speakers and ensure optimum efficiency. Performance With Bass EQ, you can maximize the performance of your system and get even more powerful bass. General Features: Alpine BBX-F1200 Class-A/B 2-ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 70 watts x 4 channel 1 ohm: ------------N/A------------ Bridged, 4 ohms: 130 watts x 2 channel Total power output: 600 watts Pulse Width Modulated MOSFET power supply LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 or channel operation 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity: .2V - 8V Frequency Response: 5 - 50000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 95dB Variable high-pass filter: 50 - 500 Hz Variable low-pass filter: 50 - 500 Hz Variable Bass Boost: 0 to +12 dB bass boost Fuse Rating: 40A x 1 Dimensions: 9.4"W x 12.9"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What's in the BBX-F1200 package: BBX-F1200 owner's manual Four-Channel amplifier Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier + Absolute KIT8 8 Gauge Amplifier Kit Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-A32F 4-Channel Car Amplifier, 50 Watts RMS x 4 + Absolute 8 Gauge Amplifier Kit Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTA-450 4-Channel 200 Watt RMS Power Pack AmplifierDynamic Peak Power (DPP) Technology The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW. General Features: Alpine KTA-450 Class D 4-channel Weather Resistant Power Pack Amplifier CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category Power Handling 50W RMS x 4 @ 4 Ohms 45W RMS x 4 @ 2 Ohms Total Power Handling: 200W RMS CTA-2006 compliant Frequency Response: 15-50 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels Fuse Rating: 15A Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-450 Package: KTA-450 Package owner's manual 4-Channel amplifier Wiring harness Mounting plate 2 Mounting brackets 4 Wire-ties 4 Hex-head machine screws 2 Pan-head machine screws 4 Pan-head self-tapping screws Warranty Information ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine KTA-450 4-Channel 200 Watt RMS Power Pack Amplifier Dynamic Peak Power (DPP) Technology The KTA-450 features Alpine’s exclusive DPP technology which intelligently adjusts the gain to automatically adapt to musical needs. DPP prevents the amplifier from clipping music signals by supplying up to double the power to support rhythmic instruments that provide snappy sounds (like a snare drum, trumpet, or high-hat cymbals). During these dynamic musical passages, DPP instantly delivers bursts of power to rise to the peak demands of the music. The DPP technology boosts the KTA-450’s performance to 400 watts DPP, essentially doubling the amplifier’s power without increasing its size. Other Power Pack Amplifiers with the DPP technology are the KTA-30FW and KTA-30MW. General Features: Alpine KTA-450 Class D 4-channel Weather Resistant Power Pack Amplifier CES 2019 Innovation Award Winner in the In-Vehicle Audio/Video category Power Handling 50W RMS x 4 @ 4 Ohms 45W RMS x 4 @ 2 Ohms Total Power Handling: 200W RMS CTA-2006 compliant Frequency Response: 15-50 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Selectable high-pass filters (60, 80, 120 Hz at 12 dB/octave) on front and rear channels Fuse Rating: 15A Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-450 Package: KTA-450 Package owner's manual 4-Channel amplifier Wiring harness Mounting plate 2 Mounting brackets 4 Wire-ties 4 Hex-head machine screws 2 Pan-head machine screws 4 Pan-head self-tapping screws Warranty Information ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-A32F S-Series 320W RMS 4-Channel Digital Class D Car Audio Amplifier The all-new S-Series amplifiers pack a punch with even more performance and value. Experience hard-hitting bass and long hours of limitless play with the S-A32F 4-channel amplifier. These amplifiers offer great value with over 20% more power through increased watt handling. The exceptional strength and resistance are supported by optimizing a heat thermal management processor to ensure exceptional reliability. You can enjoy your music with the bass cranked up for hours without any power shutdown.General Features: Alpine S-Series S-A32F 4/3/2 Channel Power Amplifier S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. S-Series Amplifier: Known for reliable performance and value-oriented products. Power Output: 55W RMS x 4 (4ohm, 14.4V ≤ 1% THD+N) 80W RMS x 4 (2ohm, 14.4V≤ 1% THD+N) Bridged: 160W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N) Total power output: 320 watts CEA-2006 Compliant Amplifier LED Power/Protect Light Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and short speaker protection) Frequency Response: 10 - 30,0000 Hz Total Harmonic Distortion (THD): <1% Signal Noise Ratio: 83 dB Variable high-pass filter: 50 - 400 Hz, 12 dB/octave Variable low-pass filter: 50 - 400 Hz, 12 dB/octave Fuse Rating: 40 Improved heat sink and protection circuit design Contain technology currently implemented in the Alpine R and X-Series models 105dB Signal-to-Noise (S/N) ratio at rated power 46 degrees of phase shift Designed to perform perfectly with the existing S-Series speakers and subwoofers Dimensions: 8” W x 8” H x 2.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the S-A32F package: S-A32F owner's manual 4-Channel amplifier One 40-amp ATO fuse Four 3/4" Screws 2mm Allen wrench Alpine Verification Certificate Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.