All Loaded Subwoofer Enclosures Boxes (87)

Alpine SWT-12S4 1500W Max Single 12" Bass Reflex Sealed Subwoofer Tube Enclosure With 1500W peak power handling, this ready-to-use bass reflex subwoofer tube is just for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer. General Features: 12" 4 ohm Bass Reflex Series Subwoofer 1500 Watts Peak Power Handling 300 Watts RMS Power Handling Heavy-Duty Subwoofer Grill Stitched Alpine Logo Carpeted Exterior Push SPK Terminal Installation Brackets and Belts Included Frequency Response: 28 - 200 Hz Sensitivity: 92 dB Speaker Impedance: 4 Ω Enclosure Dimensions: 12.75"W x 26" D Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: 12" Passive Subwoofer Push SPK Terminal Voice coil size/type Sensitivity: 92dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-S10 1200W Max Single 10" Sealed Subwoofer Bass Tube Enclosure Combining the intense low-bass performance and ground-shaking output of the traditional Type-R subwoofers in a thin package optimized for tiny enclosures. The SWT 10” Truck Subwoofer has been engineered to offer more installation flexibility without sacrificing enormous output to build the ideal sound system for your truck. At 4-1/8” deep. These subs provide deep bass performance where it usually couldn’t fit in a truck. The vented pole optimized for a 4-1/8” deep box is the ideal enclosure size, meaning excellent bass performance can fit just about anywhere in your truck. General Features: Single 10" Sealed Subwoofer Tube Enclosure 1200 Watts MAX Power Handling 250 Watts RMS Power Handling Final Impedance: 4 ohms Preloaded with a single 10" Subwoofer Sealed enclosure with embroidered black carpet Enclosure Dimensions: 11.25"W x 23.65" D 1-year Manufacturer's Warranty Subwoofer Features: 10" Passive Subwoofer Push SPK Terminal Frequency Response: 35-200 Hz Sensitivity: 90dB Enclosure Features: Tube enclosure Black Carpet Finish with White Alpine Logo Grille included What is in the SWT-S10 package: W10S4 owner's manual One 10" Subwoofer per box Adhesive-backed foam gasket Application Guide Online product registration information Warranty Information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION XTR Series XTR10US 10" Under Seat Powered Car Subwoofer Shallow Enclosure        ORION UNDER SEAT POWERED SUBWOOFER: The XTR10US delivers powerful, clean bass from a compact enclosure that fits easily under seats or in tight spaces. Producing 1200W Max and 300W RMS, it’s designed for vehicles where space is limited but bass is still a priority.     ADJUSTABLE BASS PERFORMANCE: Featuring a variable bass boost (0–12dB) and adjustable low-pass filter (50–150Hz), the XTR10US allows you to fine-tune your sound for tight, accurate bass response in any vehicle.     COMPACT YET POWERFUL: With dimensions of just 11.81” x 9.65” x 2.56”, this powered subwoofer fits discreetly under seats, behind seats, or in storage compartments, while delivering bass impact far beyond its size.     EASY INTEGRATION: Equipped with both RCA and high-level inputs, plus auto-start capability, making it compatible with both factory and aftermarket systems. Includes a remote subwoofer level control for on-the-fly bass adjustments.     BUILT FOR RELIABILITY: Utilizes a P.W.M. MOSFET power supply and a 4-way protection system for stable performance. Blue/Red LED illumination adds a stylish touch to your audio setup. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION XTR Series XTR8US 8" Under Seat Powered Car Subwoofer Shallow Enclosure     ORION UNDER SEAT POWERED SUBWOOFER: The XTR8US delivers powerful, clean bass from a compact enclosure that fits easily under seats or in tight spaces. Producing 1000W Max and 250W RMS, it’s designed for vehicles where space is limited but bass is still a priority.     ADJUSTABLE BASS PERFORMANCE: Featuring a variable bass boost (0–12dB) and adjustable low-pass filter (50–150Hz), the XTR8US allows you to fine-tune your sound for tight, accurate bass response in any vehicle.     COMPACT YET POWERFUL: With dimensions of just 10.24” x 7.64” x 2.95”, this powered subwoofer fits discreetly under seats, behind seats, or in storage compartments, while delivering bass impact far beyond its size.     EASY INTEGRATION: Equipped with both RCA and high-level inputs, plus auto-start capability, making it compatible with both factory and aftermarket systems. Includes a remote subwoofer level control for on-the-fly bass adjustments.     BUILT FOR RELIABILITY: Utilizes a P.W.M. MOSFET power supply and a 4-way protection system for stable performance. Blue/Red LED illumination adds a stylish touch to your audio setup. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION XTR Series XTR6US 6x8" Under Seat Powered Car Subwoofer Shallow Enclosure     ORION UNDER SEAT POWERED SUBWOOFER: The XTR6US delivers powerful, clean bass from a compact enclosure that fits easily under seats or in tight spaces. Producing 600W Max and 150W RMS, it’s designed for vehicles where space is limited but bass is still a priority.     ADJUSTABLE BASS PERFORMANCE: Featuring a variable bass boost (0–12dB) and adjustable low-pass filter (50–150Hz), the XTR6US allows you to fine-tune your sound for tight, accurate bass response in any vehicle.     COMPACT YET POWERFUL: With dimensions of just 10.24” x 7.64” x 2.95”, this powered subwoofer fits discreetly under seats, behind seats, or in storage compartments, while delivering bass impact far beyond its size.     EASY INTEGRATION: Equipped with both RCA and high-level inputs, plus auto-start capability, making it compatible with both factory and aftermarket systems. Includes a remote subwoofer level control for on-the-fly bass adjustments.     BUILT FOR RELIABILITY: Utilizes a P.W.M. MOSFET power supply and a 4-way protection system for stable performance. Blue/Red LED illumination adds a stylish touch to your audio setup. Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION XTR XTP8 – 8” Tuned Port Loaded Enclosure Subwoofer More Air, More Bass – The Ultimate 8-Inch Vented Enclosure Subwoofer When you’re ready to take your bass response to the next level, the Orion XTP8 delivers. Designed for compact yet commanding bass output, this 8-inch vented enclosure subwoofer is built for enthusiasts who want clean, deep low-end power without sacrificing cargo or cabin space. With a tuned, ported design, robust internal bracing, and premium connection components, the XTP8 transforms any audio system with impactful, resonant bass. Ported for Maximum Punch The vented design of the XTP8 allows for increased airflow and reduced compression, ensuring louder, lower, and more accurate bass response. Internally braced corners eliminate standing waves and unwanted resonance, producing a smoother sound curve while reinforcing the enclosure’s durability. Built-In Protection with Smart Connectivity Whether you’re running daily or hitting hard on the weekends, the integrated woofer grille keeps your driver protected from impact without compromising sound quality. Spring-loaded nickel-plated terminals make wiring secure and efficient while preventing corrosion over time—ideal for daily drivers and demo builds alike. Key Features • Tuned Ported Enclosure – Provides superior air movement and deeper bass output with improved efficiency over sealed boxes. • Protective Subwoofer Grille – Guards the cone from physical damage while keeping airflow and output performance intact. • Spring-Loaded Nickel-Plated Terminals – Reliable, secure, and easy-to-install wire connections with long-term durability. • Internally Cornered Bracing – Reduces internal wave distortion and rattling, enhancing sound quality and enclosure strength. • Slim and Strong Form Factor – Designed to deliver high-output bass while fitting neatly in compact or unconventional spaces.   General Features:           Subwoofer Size: 8” (Inches)     Enclosure Type: Vented (Ported)     Power Handling (RMS): 300 Watts     Power Handling (Peak): 1200 Watts     Nominal Impedance: 4 Ohms     Frequency Response: 27Hz – 200Hz     Height: 5”     Depth: 11.5”     Width: 19” Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION XTR XTP6 – 6.5” Tuned Port Loaded Enclosure Subwoofer Compact Size, Deep Bass – The Ultimate 6.5-Inch Vented Enclosure Subwoofer If you’re looking for serious bass performance in a compact footprint, the Orion XTP6 is your go-to solution. Designed with precision engineering, this 6.5-inch vented enclosure subwoofer is perfect for vehicles where space is limited but powerful bass is a must. With a rugged enclosure, precision tuning, and performance-focused features, the XTP6 delivers tight, punchy low-end frequencies that bring your audio system to life. Built for Performance in Tight Spaces The XTP6 is built around a high-efficiency ported design, allowing air to move freely through the enclosure to maximize bass output and clarity. Internally cornered bracing helps reduce unwanted noise and standing waves, while the compact dimensions make installation possible in tight or hidden locations like under seats or in small trunks. Protection and Precision Engineering Equipped with a protective grille, the subwoofer is shielded from accidental damage while maintaining airflow. Spring-loaded nickel-plated terminals ensure secure, corrosion-resistant connections that make installation quick and long-lasting. This enclosure isn’t just small—it’s smart, combining thoughtful design with rugged components built to withstand daily use. Key Features • Vented Enclosure Design – Increases output and enhances bass efficiency, giving you deeper, cleaner low frequencies from a compact setup. • Protective Woofer Grille – Shields the subwoofer cone from impact or damage without compromising airflow or sound clarity. • Spring-Loaded Nickel-Plated Terminals – Durable, high-conductivity terminals for fast, secure wire connections. • Internally Braced Construction – Corner bracing reduces internal standing waves, eliminates excess noise, and improves structural integrity. • Compact and Versatile Fit – Perfect for vehicles with space constraints, while delivering powerful bass in a small form factor.   General Features:           Subwoofer Size: 6.5” (Inches)     Enclosure Type: Vented (Ported)     Power Handling (RMS): 200 Watts     Power Handling (Peak): 800 Watts     Nominal Impedance: 4 Ohms     Frequency Response: 28Hz – 500Hz     Height: 5”     Depth: 9.53”     Width: 14.06” Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION Cobalt CPE120 – 12-Inch Active Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 12-Inch Active Down-Firing Subwoofer Enclosure For those looking for deep, powerful bass without the hassle of an external amplifier, the Cobalt CPE120 is the perfect solution. This 12-inch active down-firing subwoofer enclosure delivers rich, low-frequency response in a compact, space-saving design, making it an excellent choice for vehicles with limited installation space. With a built-in amplifier, the CPE120 eliminates the need for an external power source, providing seamless integration and powerful sound in one easy-to-install package. Why Choose an Active Down-Firing Enclosure? Unlike traditional subwoofer setups, the CPE120's down-firing design allows the subwoofer to utilize the vehicle’s floor as a natural amplifier, enhancing low frequencies and producing deeper, more immersive bass. The built-in amplifier ensures optimized power delivery, allowing the subwoofer to operate at peak performance without distortion. This all-in-one solution provides a hassle-free setup while delivering thunderous bass in a sleek, low-profile design. Built for Performance and Convenience The Cobalt CPE120 is constructed from high-quality MDF, ensuring rigid structural integrity to prevent unwanted resonance and distortion. The heavy-duty automotive-grade carpet covering not only enhances its aesthetic appeal but also helps keep the enclosure securely in place during vehicle movement. Designed for plug-and-play simplicity, the CPE120 features an integrated amplifier, making it easy to install without requiring additional wiring or an external power source. Whether you want booming bass for high-energy music or smooth, low-frequency enhancement for a balanced sound, this active subwoofer enclosure delivers exceptional performance with minimal effort. Key Features Integrated Amplifier for Hassle-Free Power – Built-in amplifier delivers optimized power output, eliminating the need for an external amp while ensuring clean, distortion-free bass. Down-Firing Design for Enhanced Bass Response – Uses vehicle floor reflection to maximize low-end output, producing deeper, richer bass with minimal distortion. Premium MDF Construction for Reduced Vibrations – Built with high-density MDF, the enclosure is rigid and durable, minimizing resonance for accurate, powerful bass performance. Sleek Automotive-Grade Carpet Finish – Professional, non-slip covering that enhances aesthetics while keeping the enclosure securely in place during driving. Compact, All-in-One Solution – Space-saving design with integrated amplifier, ideal for vehicles with limited space, allowing for easy installation without sacrificing bass power. General Features:           Speaker Size: 12 (Inches)     Enclosure Type: Active Down-Firing     Power Handling (Peak): 2000 Watts     Power Handling (RMS): 500 Watts     Sensitivity: 90 dB     Frequency Response: 26 Hz - 500 Hz     Enclosure Volume: 0.84 cu. ft.     Dimension: 21" x 7" x 14" | 534mm x 178mm x 356mm (WxHxD)     Final Impedance: 4 Ohms     Bass Boost: 0 -+ 12 dB     Low Pass Crossover: 50Hz - 200Hz     Hi and Low-Level Inputs     Cone Material: Spun Aluminum Cone     Surround Material: Hi Strength Rubber EPDM Enhanced Surround     Enclosure Type: Air Tight Sealed Enclosure     Terminal Type: Push Type Terminals     Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION Cobalt CPE100 – 10-Inch Active Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 10-Inch Active Down-Firing Subwoofer Enclosure For those looking for deep, powerful bass without the hassle of an external amplifier, the Cobalt CPE100 is the perfect solution. This 10-inch active down-firing subwoofer enclosure delivers rich, low-frequency response in a compact, space-saving design, making it an excellent choice for vehicles with limited installation space. With a built-in amplifier, the CPE100 eliminates the need for an external power source, providing seamless integration and powerful sound in one easy-to-install package. Why Choose an Active Down-Firing Enclosure? Unlike traditional subwoofer setups, the CPE100's down-firing design allows the subwoofer to utilize the vehicle’s floor as a natural amplifier, enhancing low frequencies and producing deeper, more immersive bass. The built-in amplifier ensures optimized power delivery, allowing the subwoofer to operate at peak performance without distortion. This all-in-one solution provides a hassle-free setup while delivering thunderous bass in a sleek, low-profile design. Built for Performance and Convenience The Cobalt CPE100 is constructed from high-quality MDF, ensuring rigid structural integrity to prevent unwanted resonance and distortion. The heavy-duty automotive-grade carpet covering not only enhances its aesthetic appeal but also helps keep the enclosure securely in place during vehicle movement. Designed for plug-and-play simplicity, the CPE100 features an integrated amplifier, making it easy to install without requiring additional wiring or an external power source. Whether you want booming bass for high-energy music or smooth, low-frequency enhancement for a balanced sound, this active subwoofer enclosure delivers exceptional performance with minimal effort. Key Features Integrated Amplifier for Hassle-Free Power – Built-in amplifier delivers optimized power output, eliminating the need for an external amp while ensuring clean, distortion-free bass. Down-Firing Design for Enhanced Bass Response – Uses vehicle floor reflection to maximize low-end output, producing deeper, richer bass with minimal distortion. Premium MDF Construction for Reduced Vibrations – Built with high-density MDF, the enclosure is rigid and durable, minimizing resonance for accurate, powerful bass performance. Sleek Automotive-Grade Carpet Finish – Professional, non-slip covering that enhances aesthetics while keeping the enclosure securely in place during driving. Compact, All-in-One Solution – Space-saving design with integrated amplifier, ideal for vehicles with limited space, allowing for easy installation without sacrificing bass power. General Features:           Speaker Size: 10 (Inches)     Enclosure Type: Active Down-Firing     Power Handling (Peak): 1600 Watts     Power Handling (RMS): 400 Watts     Sensitivity: 92 dB     Frequency Response: 30 Hz - 500 Hz     Enclosure Volume: 0.57 cu. ft.     Dimension: 19" x 6" x 13" | 483mm x 153mm x 310mm (WxHxD)     Final Impedance: 4 Ohms     Bass Boost: 0 -+ 12 dB     Low Pass Crossover: 50Hz - 200Hz     Hi and Low-Level Inputs     Cone Material: Spun Aluminum Cone     Surround Material: Hi Strength Rubber EPDM Enhanced Surround     Enclosure Type: Air Tight Sealed Enclosure     Terminal Type: Push Type Terminals     Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION Cobalt CPE80 – 8-Inch Active Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 8-Inch Active Down-Firing Subwoofer Enclosure For those looking for deep, powerful bass without the hassle of an external amplifier, the Cobalt CPE80 is the perfect solution. This 8-inch active down-firing subwoofer enclosure delivers rich, low-frequency response in a compact, space-saving design, making it an excellent choice for vehicles with limited installation space. With a built-in amplifier, the CPE80 eliminates the need for an external power source, providing seamless integration and powerful sound in one easy-to-install package. Why Choose an Active Down-Firing Enclosure? Unlike traditional subwoofer setups, the CPE80's down-firing design allows the subwoofer to utilize the vehicle’s floor as a natural amplifier, enhancing low frequencies and producing deeper, more immersive bass. The built-in amplifier ensures optimized power delivery, allowing the subwoofer to operate at peak performance without distortion. This all-in-one solution provides a hassle-free setup while delivering thunderous bass in a sleek, low-profile design. Built for Performance and Convenience The Cobalt CPE80 is constructed from high-quality MDF, ensuring rigid structural integrity to prevent unwanted resonance and distortion. The heavy-duty automotive-grade carpet covering not only enhances its aesthetic appeal but also helps keep the enclosure securely in place during vehicle movement. Designed for plug-and-play simplicity, the CPE80 features an integrated amplifier, making it easy to install without requiring additional wiring or an external power source. Whether you want booming bass for high-energy music or smooth, low-frequency enhancement for a balanced sound, this active subwoofer enclosure delivers exceptional performance with minimal effort. Key Features Integrated Amplifier for Hassle-Free Power – Built-in amplifier delivers optimized power output, eliminating the need for an external amp while ensuring clean, distortion-free bass. Down-Firing Design for Enhanced Bass Response – Uses vehicle floor reflection to maximize low-end output, producing deeper, richer bass with minimal distortion. Premium MDF Construction for Reduced Vibrations – Built with high-density MDF, the enclosure is rigid and durable, minimizing resonance for accurate, powerful bass performance. Sleek Automotive-Grade Carpet Finish – Professional, non-slip covering that enhances aesthetics while keeping the enclosure securely in place during driving. Compact, All-in-One Solution – Space-saving design with integrated amplifier, ideal for vehicles with limited space, allowing for easy installation without sacrificing bass power. General Features:           Speaker Size: 8 (Inches)     Enclosure Type: Active Down-Firing     Power Handling (Peak): 800 Watts     Power Handling (RMS): 200 Watts     Sensitivity: 90 dB     Frequency Response: 32 Hz - 500 Hz     Enclosure Volume: 0.35 cu. ft.     Dimension: 17.6" x 6" x 9" | 447mm x 153mm x 229mm (WxHxD)     Final Impedance: 4 Ohms     Bass Boost: 0 -+ 12 dB     Low Pass Crossover: 50Hz - 200Hz     Hi and Low-Level Inputs     Cone Material: Spun Aluminum Cone     Surround Material: Hi Strength Rubber EPDM Enhanced Surround     Enclosure Type: Air Tight Sealed Enclosure     Terminal Type: Push Type Terminals     Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION Cobalt CDF12 – 12-Inch Passive Down-Firing Enclosure Compact Size, Powerful Bass – The Ultimate 12-Inch Down-Firing Enclosure If you’re searching for a space-efficient subwoofer enclosure that delivers rich, deep bass, the Cobalt CDF12 is your perfect solution. Designed for optimal low-frequency performance, this 12-inch passive down-firing enclosure is engineered to enhance bass output while keeping your subwoofer protected. Whether you’re upgrading your factory sound system or fine-tuning your custom setup, the CDF12 provides the perfect balance of power, durability, and clarity. Why Choose a Down-Firing Enclosure? Unlike traditional front-firing enclosures, the CDF12 utilizes a down-firing design, directing sound waves toward the vehicle’s surface, which naturally amplifies low frequencies and creates a deep, rich bass response. This design also helps to reduce distortion and speaker fatigue, ensuring clean, powerful bass performance over extended periods. Built to Last, Engineered for Performance The Cobalt CDF12 is constructed from high-quality MDF (Medium-Density Fiberboard), a material specifically chosen to eliminate vibrations and unwanted resonance, ensuring tight, distortion-free bass. The heavy-duty automotive-grade carpet covering not only gives it a sleek, professional look but also prevents unwanted movement while driving, keeping your enclosure securely in place. With its passive design, the CDF12 offers versatile compatibility with a wide range of 12-inch subwoofers, allowing you to customize your audio system for peak performance. Whether you’re looking for deep, booming lows or smooth, refined bass, this enclosure is designed to bring out the best in your subwoofer. Key Features Down-Firing Design – Enhances bass response by reflecting sound off surfaces for deeper, more controlled low frequencies. Premium MDF Construction – Provides durability and minimizes resonance for distortion-free sound. Automotive-Grade Carpet Finish – Ensures a sleek, secure fit that prevents movement while driving. Space-Saving Design – Ideal for vehicles with limited space, offering powerful bass without taking up excess room. Passive Configuration – Compatible with most 12-inch subwoofers for easy system customization. General Features:           Speaker Size: 12 (Inches)     Enclosure Type: Passive Down-Firing     Power Handling (Peak): 2000 Watts     Power Handling (RMS): 500 Watts     Sensitivity: 92 dB     Frequency Response: 26 Hz - 500 Hz     Enclosure Volume: 0.8 cu. ft.     Dimension: 20.47" x 6.7" x 14.1" | 520mm x 170mm x 358mm (WxHxD)     Final Impedance: 4 Ohms     Cone Material: Spun Aluminum Cone     Surround Material: Hi Strength Rubber EPDM Enhanced Surround     Enclosure Type: Air Tight Sealed Enclosure     Terminal Type: Push Type Terminals     Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ORION Cobalt CDF10 – 10-Inch Passive Down-Firing Enclosure  Compact Size, Powerful Bass – The Ultimate 10-Inch Down-Firing Enclosure If you’re searching for a space-efficient subwoofer enclosure that delivers rich, deep bass, the Cobalt CDF10 is your perfect solution. Designed for optimal low-frequency performance, this 10-inch passive down-firing enclosure is engineered to enhance bass output while keeping your subwoofer protected. Whether you’re upgrading your factory sound system or fine-tuning your custom setup, the CDF10 provides the perfect balance of power, durability, and clarity. Why Choose a Down-Firing Enclosure? Unlike traditional front-firing enclosures, the CDF10 utilizes a down-firing design, directing sound waves toward the vehicle’s surface, which naturally amplifies low frequencies and creates a deep, rich bass response. This design also helps to reduce distortion and speaker fatigue, ensuring clean, powerful bass performance over extended periods. Built to Last, Engineered for Performance The Cobalt CDF10 is constructed from high-quality MDF (Medium-Density Fiberboard), a material specifically chosen to eliminate vibrations and unwanted resonance, ensuring tight, distortion-free bass. The heavy-duty automotive-grade carpet covering not only gives it a sleek, professional look but also prevents unwanted movement while driving, keeping your enclosure securely in place. With its passive design, the CDF10 offers versatile compatibility with a wide range of 10-inch subwoofers, allowing you to customize your audio system for peak performance. Whether you’re looking for deep, booming lows or smooth, refined bass, this enclosure is designed to bring out the best in your subwoofer. Key Features Down-Firing Design – Enhances bass response by reflecting sound off surfaces for deeper, more controlled low frequencies. Premium MDF Construction – Provides durability and minimizes resonance for distortion-free sound. Automotive-Grade Carpet Finish – Ensures a sleek, secure fit that prevents movement while driving. Space-Saving Design – Ideal for vehicles with limited space, offering powerful bass without taking up excess room. Passive Configuration – Compatible with most 10-inch subwoofers for easy system customization. General Features:           Speaker Size: 10 (Inches)     Enclosure Type: Passive Down-Firing     Power Handling (Peak): 1600 Watts     Power Handling (RMS): 400 Watts     Sensitivity: 95 dB     Frequency Response: 30 Hz - 500 Hz     Enclosure Volume: 0.5 cu. ft.     Dimension: 18.7" x 6.1" x 12.2" | 475mm x 155mm x 310mm (WxHxD)     Final Impedance: 4 Ohms     Cone Material: Spun Aluminum Cone     Surround Material: Hi Strength Rubber EPDM Enhanced Surround     Enclosure Type: Air Tight Sealed Enclosure     Terminal Type: Push Type Terminals     Carpet Type: Black and Grey Industrial Strength Carpet Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.