All Car Speakers (1002)

Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to leap at the premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile to fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to strengthen the 6-1/2" woofer in lower frequencies. The woofer cone uses a specialized fiber for extreme rigidity, while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers + 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws + Eight 5/8" Screws 8 Speed-clips + 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Absolute BLS-5253 Blast Series 5.25 Inches 3 Way Car/Marine/ATV/UTV Speakers 560 Watts The Absolute Blast series Speakers Are Your Calling Card. Available in Multiple Sizes, the blast Speakers Are the Perfect car/Marine/ATV/UTV speaker Replacement If You’re Not Looking to spend a Ton of Money. They Are Designed with a Polypropylene Cone to Provide a Punchy Sound with Quick Transitions from Note to Note. Rubber Speaker Surrounds Assist with The Linear Movement of The Cone While Simultaneously Allowing for a Great Excursion Than Many Other Speakers. The blast series Speakers Are Designed with a Shallow Mounting Depth and a Wide Frequency Response for Easy Fitment with Maximum Performance in Almost any Car/Marine/ATV/UTV on the Market. If You’re Looking for the Next Big Upgrade for Your Car/Marine/ATV/UTV audio System, Check Out the Blast Series Speakers. General Features: 5.25" Blast Series 3-way full Range Coaxial Car/Marine/ATV/UTV Speakers Universal Fit For Cars, Boats, Motorcycles, ATVs, and UTVs Peak Power Handling: 560 Watts Per Pair / 280 Watts Each RMS Power Handling: 70 Watts Per Pair / 35 Watts Each White Injection-molded polypropylene Cone Material Woofer Gives Amazing Bass and Midranges Flex Motion Butyl Rubber surround Premium Rubber Surround For Superior Durability Stamped Steel Vented Frame For Increased Airflow And Performance Rubber Magnet Boot Cover Non-corrosive Plastic Speaker Grilles Included Stamped Steel Mounting Hardware 6.5 Oz Magnet Structure 19 High-Temperature Voice Coil Design 30 Mm Dome Midrange Tweeter 1.25" Midrange Top-mount Depth: 1.85" Cutout Dimensions: 4.409" 4 Ohms Impedance Frequency Response: 40 - 22000 Hz Sensitivity: 88db Speaker Grilles Included 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Paires Alpine SXE-6925S 2-way 6"x9" 280 Watts Coaxial Speakers Alpine SXE-6925S main feature is a Mylar-Titanium Balanced Dome Tweeter for a smooth vocal reproduction at a price not to be missed. The tweeters in this set sound fantastic. Alpine mids and highs have always been well-rounded and smooth sounding. This set of component speakers is no different.General Features: 6 x 9" Type-E Series Coaxial Car Speakers Power Handling: Peak: 280 watts per pair / 140 watts each RMS: 90 watts per pair / 45 watts each Long fiber natural pulp woofer Mylar dome tweeter Frequency Response: 40-20,000 Hz Mounting Depth: 68mm Sensitivity: 92dB Grilles included Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.