00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Pair Alpine R-S69C.2 Component System
600W Peak, 200W RMS R-Series 6x9" Component 2-Way Speakers $721.90 $1,499.99
600W Peak, 200W RMS R-Series 6x9" Component 2-Way Speakers $721.90 $1,499.99
2 Pair Alpine R-S69C.2 Component System 600W Peak, 200W RMS R-Series 6x9" Component 2-Way Speakers
FOR LIVING LOUD AND HAVING FUN
If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
MORE OUTPUT FOR MORE FUN
The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output.
The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with in-line, passive design, and reduced footprint, which contributes to easier installation.
EXCLUSIVE CONE TECHNOLOGY
The R-Series speakers use Alpine’s exclusive cone technology, Carbon Fiber Reinforced Polymer (CFRP), which is a high-strength, lightweight material. CFRP can be custom formed so that its fibers align in the same direction as the curve and shape of the cone, thereby reducing resonant peaks and increasing the speakers’ mid-bass performance and dynamic range. CFRP is also used as a tweeter diaphragm, enabling the speakers to perform into the 45kHz range and making them compliant with High-Resolution Audio playback.
BETTER FITMENT WITHOUT SACRIFICING MOTOR FORCE
The R-Series speakers use a neodymium magnet which gives them a shorter overall height, compared to other speaker brands. The R-Series speakers also use a new, shallower grill design. The result: An improved fitment design that lets the R-Series speakers fit into tighter install locations without sacrificing motor force.
Product Details:
Alpine R-S69C.2
Alpine R-Series 6"x9" 2-Way Component Car Speakers (Pair)
Power Handling:
RMS: 100 Watts
Peak: 300 Watts
Impedance: 4 Ohms
Carbon-fiber reinforced polymer (CFRP) woofer
Carbon-fiber reinforced polymer dome tweeter
Frequency response: 60Hz - 40 kHz
Sensitivity: 90 dB
Top-mount depth: 2-7/8"
Grilles included
Authorized Dealer
1-year Manufacturer's Warranty
What is in the R-S69C.2 package:
2 Woofers
2 Woofer grilles
2 Grille badges
2 Tweeters (each has an attached 30" length of wire)
2 Tweeter grilles (installed)
2 Swivel flush mount housings (with tweeters installed)
Two crossovers (each has attached input and output wires)
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-1/8" Screws
8 Speed-clips
Eight M4x60mm Machine screws
8 Nuts
8 Flat washers
8 Split lock washers
Four 5" Zip ties
2 Pieces of two-sided tape
Warranty information
Online product registration notes
Important Notice sheet
Template and specs on the box
R-S69C.2 Owner’s Manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S2-S68 Car Speaker 460W 6x8" 5x7" Type-S 2-Way Coaxial Car Speakers
$246.90
$399.99
Alpine S2-S68 6x8" or 5x7" 460W Peak (150W RMS) 6x8" S-Series 2-way 4-ohm Coaxial Car Speakers
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S68 6x8” Coaxial Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers, resulting in a more accurate and natural sound at an entry-level price point.
General Features:
6" x 8" S Series 2-way Coaxial Car Speakers
Peak Power Handling: 460 watts per pair / 230 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Hi-Res Audio certified
Combined Polypropylene, Glass Fiber, and Mica cone material
High-Amplitude Multi-Roll (HAMR) speaker surround
1" Cloth Dome tweeters
3.54" magnet and enhanced motor structure with 110% power handling
Lightweight design with high output and low distortion
Wide vehicle fitment range for easy installation
Top-mount Depth: 2-3/8"
Cutout Dimensions: 5 x 7-3/16
Impedance: 4 ohms
Frequency Response: 75 - 40,000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the Alpine S2-S68 Package:
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire (each has quick slides on one end and bare wire on the other)
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
Alpine S2-S68 owner's manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Pair Alpine S2-S65C 6-1/2" Component 2-Way Speaker System Bundle
$299.99
$519.99
2 Pair Alpine S2-S65C 480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System
Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65C 6.5” Component Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience.
General Features:
6-1/2" 2-way Component System Car Speakers
Peak Power Handling: 480 watts per set / 240 watts on each side
RMS Power Handling: 160 watts per set / 80 watts on each side
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll surround technology
HI-RES Certified
1" Silk Dome Tweeters
Ferrite magnet motor structure
Top-mount Depth: 2-5/16"
Cutout Dimensions: 5-1/8"
Impedance: 4 ohms
Frequency Response: 55 - 40000 Hz
Sensitivity: 88 dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the SAlpine S2-S65C package:
2 Woofers
2 Woofer mount adapter brackets
2 Tweeters
2 Flush mount housings
2 Tweeter grilles
Two 37" Tweeter wires with in-line crossovers
2 Flush mount retention rings
2 Stealth brackets
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Eight 1-3/16" Screws
Warranty information
Alpine S2-S65C owner's manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-S65.2 (RS652) 6.5" Speaker
300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers $275.79 $650.00
300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers $275.79 $650.00
2 Pair Alpine R-S65.2 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers
TURN IT UP WITHOUT TURNING DOWN THE SOUND QUALITY
If you play your music loud and want others to know, the R-Series speakers match you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
MORE OUTPUT FOR MORE FUN
The woofers have a large, 35-millimeter (mm) voice coil, allowing more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling for superior control and output.
The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and reduced footprint, contributing to easier installation.
General Features:
6-1/2" 2-way car speakers (pair)
carbon-fiber-reinforced polymer (CFRP) woofer
the carbon-fiber-reinforced polymer dome tweeter
handles up to 100 watts RMS (300 watts peak power)
frequency response: 65-40,000 Hz
sensitivity: 88 dB
top-mount depth: 2-5/8"
grilles included
Authorized Dealer
1-year Manufacturer's Warranty
What is in the R-S65.2 package:
R-S65.2 owner's manual
Two 2-way Speakers
Two 6-1/2" Adapter rings
2 Grilles
2 Grille badges
Eight 1-1/8" Screws
Eight M4x12mm Machine screws
8 Speed clips
Warranty information
Important Notice
Online product registration information
Template and specs on the box
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine R-S65.2 300W Max 6-1/2" 2 Way Car Speaker
$249.95
$280.00
Alpine R-S65.2 (RS652) 300W MAX 100W RMS R-Series 6-1/2" 2-way Car Speakers
TURN IT UP WITHOUT TURNING DOWN THE SOUND QUALITY
If you play your music loud and want others to know, the R-Series speakers match you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
MORE OUTPUT FOR MORE FUN
The woofers have a large, 35-millimeter (mm) voice coil, allowing more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling for superior control and output.
The R-Series speakers incorporate Alpine’s patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with an in-line, passive design and reduced footprint, contributing to easier installation.
General Features:
6-1/2" 2-way car speakers (pair)
carbon-fiber-reinforced polymer (CFRP) woofer
the carbon-fiber-reinforced polymer dome tweeter
handles up to 100 watts RMS (300 watts peak power)
frequency response: 65-40,000 Hz
sensitivity: 88 dB
top-mount depth: 2-5/8"
grilles included
Authorized Dealer
1-year Manufacturer's Warranty
What is in the R-S65.2 package:
R-S65.2 owner's manual
Two 2-way Speakers
Two 6-1/2" Adapter rings
2 Grilles
2 Grille badges
Eight 1-1/8" Screws
Eight M4x12mm Machine screws
8 Speed clips
Warranty information
Important Notice
Online product registration information
Template and specs on the box
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine S-S69 Car Speaker 520W 6" x 9" Series 2-Way Coaxial Car Speakers
$265.90
$349.99
Alpine S-S69 520W Max (170W RMS) 6" x 9" Type S Series 2-Way Coaxial Car Speakers
FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a 6x9-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
6" x 9" Type S Series 2-Way Coaxial Car Speakers
Power Handling: Peak: 520 watts per pair / 260 watts each
Power Handling: RMS: 170 watts per pair / 85 watts each
Recommended Power Range: 10 - 85 watts RMS per channel
Carbon Fiber Reinforced Plastic (CFRP) Cone
High Amplitude Multi-Roll (HAMR) Surround
1" Silk Dome Tweeter
Rubber magnet boot cover
CEA-2031 compliant speakers
35mm Voice Coil
Top-mount Depth: 2-15/16"
Cutout Dimensions: 5-29/32" x 8-3/4"
4 ohms Impedance
Frequency Response: 65 - 22000 Hz
Sensitivity: 90dB
Compatible with the Alpine KTE-S69G Grille
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-S69 package:
S-S69 owner's manual
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire
Eight 1-3/16" Screws
Eight M4x60mm Machine screws
Eight M4 Nuts
8 Speed clips
16 Flat washers
8 Split lock washers
8 Spacers
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
4 Alpine SXE Series 2-Way 6x9" Coaxial Speakers, 280W Peak Power (SXE-6925S)
$119.95
$239.99
2 Pair Alpine SXE-6925S 2-way 6"x9" 280 Watts Coaxial Speakers
Alpine SXE-6926S main feature is a Mylar-Titanium Balanced Dome Tweeter for smooth vocal reproduction at a price not to be missed. The tweeters in this set sound fantastic. Alpine mids and highs have always been well-rounded and smooth-sounding. This set of component speakers is no different.
General Features:
6 x 9" Type-E Series Coaxial Car Speakers
Power Handling:
Peak: 280 watts per pair / 140 watts each
RMS: 90 watts per pair / 45 watts each
Long fiber natural pulp woofer
Mylar dome tweeter
Frequency Response: 40-20,000 Hz
Mounting Depth: 68mm
Sensitivity: 92dB
Grilles included
What is in the SXE-6926S package:
6X9" Speakers (2)
Mounting screws (4)
Mounting screws (8)
Speaker connection cables (2)
SXE-6926S owner's manual
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SS57 5x7" Rear Factory Speaker Replacement Kit For 99-02 Ford Expedition
$129.95
$199.99
Alpine SS57 5x7" Rear Factory Speaker Replacement Kit For 1999-2002 Ford Expedition
Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers
IT FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5"x7" S-Type Series TYPE Car Speakers/Component System
Peak Power Handling: 460 watts per pair / 230 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
1.1" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2-11/32"
Cutout Dimensions: 4-15/16" x 7-3/16"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-S57 package:
S-S57 owner's manual
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-S57 5x7" Rear Factory Speaker Replacement Kit For 2000-2010 Ford F-650/750 + Metra 72-5600 Speaker Harness
$129.95
$150.00
Alpine S-S57 5x7" Rear Factory Speaker Replacement Kit For 2000-2010 Ford F-650/750 + Metra 72-5600 Speaker Harness
FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5x7inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5"x7" S-Type Series TYPE Car Speakers/Component System
Power Handling:
Peak: 460 watts per pair / 230 watts each
RMS: 150 watts per pair / 75 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
1.1" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2-11/32"
Cutout Dimensions: 4-15/16" x 7-3/16"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
Alpine S-S57 owner's manual
Metra 72-5600 Speaker Adapter
FORD 98-Up Speaker Harness
Sold as Pair
Compatible WithChevroletCamaro 2010-2015Colorado (w/ 7" MyLink radio, RPO code: IOB) 2017Colorado 2015-2017Silverado 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017Silverado 1500 2014-2017Silverado 2500HD, 3500HD 2015-2017Suburban 2015-2017Tahoe 2015-2017FordCrown Victoria 1998-2011Edge 2007-2010Escape 2008-2012Escape (w/ out sub) 2004-2007Escape (seven speaker system w sub) 2004-2007Escape Hybrid 2004-2007Escape 2001-2003Excursion 2000-2005Expedition 2007-2014Expedition Non NAV 2004-2006Expedition with factory NAV 2004-2006Expedition (late production) with factory NAV 2003Expedition (late production) 2003Expedition (early production) 2003Expedition 1999-2002Expedition (fleet) 2015Expedition (SSV) 2015Explorer 2005-2010Explorer (Audiophile system w sub) 2004-2005Explorer 2002-2003Explorer Sport Trac 2001-2010F-150 2004-2008F-250/350/450/550 2017F-250/350/450/550 (with 8.4-inch screen) 2013-2016F-250/350/450/550 (without 8.4-inch screen) (with CD) 2013-2016F-250/350/450/550 XL (without CD) 2013-2016F-250/350/450/550 1999-2012F-250 1998F-650/750 (AM/FM/CD) 2016-2017F-650/750 (AM/FM) 2016-2017F-650/750 2000-2015Focus (without MyFordTouch) 2012-2014Focus 2000-2007Focus (with Blaupunkt radio) 2003-2004Freestar 2004-2007Fusion 2006-2009Mustang 2010-2014Mustang (late 2008 build date) 2008-2009Mustang (early 2008 build date) 2008Mustang 2005-2007Ranger 1998-2011Taurus (without electronic controls) 2000-2007Taurus (with electronic controls) 2000-2007Thunderbird 2002-2005Transit Connect 2010-2011GMCCanyon (w/ 7" MyLink radio, RPO code: IOB) 2017Canyon 2015-2017Sierra 1500/2500/3500 (w/ 7" MyLink radio, RPO code: IOB) 2016-2017Sierra 1500 2014-2017Sierra 2500HD, 3500HD 2015-2017Yukon / Yukon XL 2015-2016Yukon Denali / Yukon XL Denali 2015-2016LincolnAviator (with NAV) 2003-2005Aviator (without NAV) 2003-2005Mark LT 2005-2008MKX (with NAV) 2007-2010MKX (without NAV) 2007-2010MKZ (with NAV) 2007-2009MKZ (without NAV) 2007-2009Navigator (with NAV) 2007-2014Navigator (without NAV) 2003-2014Navigator (with NAV) (w/ THX audio) 2003-2006Navigator (with NAV) (w/o THX audio) 2003-2006Navigator (early production) 2003Navigator 1999-2002Town Car (with NAV) 2003-2011Town Car (without NAV) 2003-2011Zephyr (with NAV) 2006Zephyr (without NAV) 2006MazdaB-Series Pickup 1998-2009Mazda3 2004-2009Tribute 2008-2011Tribute 2001-2006MercuryGrand Marquis 1998-2010Marauder 2003-2004Mariner 2005-2011Monterey 2004-2007Mountaineer 2006-2010Mountaineer(Audiophile system w sub) 2004-2005Mountaineer(system w/ out factory sub) 2004-2005Mountaineer 2002-2003Sable 2008-2009Sable (no electronic controls) 2000-2006Sable (electronic controls) 2000-2007
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-S40 4" Coaxial 2-Way, 280-Watt Type-S Series Coaxial Car Audio Speakers
$89.95
$139.99
Alpine S2-S40 4" Coaxial 2-Way, 280-Watt Type-S Series Coaxial Car Audio Speakers Bundle
This bundle contains two Alpine S2-S40 4" Coaxial 2-Way Speaker Set.Alpine sounds are tailor-made for easy factory speaker placement.Introducing the Type-S speaker lineup, with multiple size options to fit almost any vehicle. This is the way to go if you want to add incredible-sounding Alpine speakers to your system. This latest offering from the popular Type-S speakers is a best-bet upgrade and is still budget-friendly.OverviewGreat-sounding speaker upgrades at a competitive price.Perfect for OEM upgrades, with many sizes to suit almost any vehicle.New cosmetics that look good in your car and fit easily in stock speaker locations.Improve your vehicle's output and sound quality with these highly efficient speaker choices.High-efficiency design runs easily off of factory or built-in head unit power.
General Features:
4" 2-way Coaxial Car Speakers
Peak Power Handling: 280 watts per pair / 140 watts each
RMS Power Handling: 90 watts per pair / 45 watts each
Polypropylene cone material
Rubber speaker surround
High Amplitude Multi-Roll (HAMR) surround
HI-RES Certified
3/4" Silk Dome Tweeters
Ferrite magnet motor structure
Top-mount Depth: 1-3/4"
Cutout Dimensions: 3-11/16"
Impedance: 4 ohms
Frequency Response: 90 - 40000 Hz
Sensitivity: 86 dB
Authorized Internet Dealer
MFR #: S2-S40
1-year Manufacturer's Warranty
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-S50 340W Max (110W RMS) 5 1/4" Type-S 2-Way Coaxial Car Speakers
$99.95
$120.00
Alpine S-S50 340W Max (110W RMS) 5 1/4" Type S Series 2-Way Coaxial Car Speakers
FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a new 5 1/4-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality in their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5 1/4" S-Type Series TYPE Car Speakers/Component System
Peak Power Handling: 340 watts per pair / 170 watts each
RMS Power Handling: 110 watts per pair / 55 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
3/4" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-S50 package:
S-S50 owner's manual
Two 2-way speakers
2 Adapter rings
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-S57 Car Speaker 460W Max (150W RMS) 5" x 7" Type-S 2-Way Coaxial Car Speakers
$129.95
$199.99
Alpine S-S57 460W Max (150W RMS) 5" x 7" Type S Series 2-Way Coaxial Car Speakers
Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers
IT FITS IN MOST COMMON APPLICATIONS
To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today.
INCREASED DRIVING POWER AND CONTROL
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process.
General Features:
5"x7" S-Type Series TYPE Car Speakers/Component System
Peak Power Handling: 460 watts per pair / 230 watts each
RMS Power Handling: 150 watts per pair / 75 watts each
Carbon fiber reinforced plastic cone
Patented HAMR surround
1.1" Silk dome tweeter
CTA-2031 compliant speakers
30MM Voice Coil
Top-mount Depth: 2-11/32"
Cutout Dimensions: 4-15/16" x 7-3/16"
4 ohms impedance
Frequency Response: 73 - 22000 Hz
Sensitivity: 88dB
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-S57 package:
S-S57 owner's manual
Two 2-way speakers
2 Adapter rings
Two 12" Lengths of speaker wire
Eight 1-1/4" Screws
Eight M4x6mm Machine screws
8 Speed clips
Warranty information
Online product registration information
Important Notice sheet
Template and specs on the box
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.