4-Channel Marine Amplifiers (7)

Rockford Fosgate PM600X4  Punch Marine 600 Watt 4-Channel Amplifier The Punch PM600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum. FEATURES AT A GLANCE     Features C.L.E.A.N. Set-up     RCA pass-thru outputs     12dB/octave Butterworth crossover     Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)     On-board Punch EQ with +18dB boost @ 45Hz     High level input capable with Auto Turn-On circuit     Cast aluminum heatsink     Over current protection     Stealth top mounted control panel     Muted turn on     Marine grade two part epoxy coating on circuit boards     Marine grade stainless steel hardware     Short circuit protection     2-Year Warranty Number of Channels: 4 Total Power(Sum of Rated Power): 600 Watts Rated Power (RMS Continuous Power) 75 Watts x 4 @ 4-Ohm 150 Watts x 4 @ 2-Ohm 300 Watts x 2 @ 4-Ohm Bridged Dynamic Power (PVC/PowerCube®) 129 Watts x 4 @ 4-Ohms 0° Res 211 Watts x 4 @ 2-Ohms 0° Res Bridgeable Yes Frequency Response 20Hz to 20kHz +/- 1.0dB Input Sensitivity 150 mV - 12 V Circuit Topology Class Class A/B Efficiency (average) 68% @ 4-Ohm Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0% 2-Ohm: <1.0% Signal Input Hi/Low level: 2 RCA pair Signal Output Low level: 1 RCA pair Tone Controls Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz Function depends upon LP/AP/HP switch position Crossover Controls Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth All-Pass: Yes Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Rockford Fosgate PM400X2 Punch Marine 400 Watt 4-Channel Amplifier The PM400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the PM400X4 is an excellent amplifier choice for virtually any vehicle. FEATURES AT A GLANCE     Features C.L.E.A.N. Set-up     12dB/octave Butterworth crossover     Over current protection     Muted turn on     On-board Punch EQ with +18dB boost @ 45Hz     High level input capable with Auto Turn-On circuit     Cast aluminum heatsink     Stealth top mounted control panel     Short circuit protection     Marine grade two part epoxy coating on circuit boards     Marine grade stainless steel hardware     2-Year Warranty Number of Channels: 4 Total Power (Sum of Rated Power): 400 Watts Rated Power (RMS Continuous Power) 50 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged Dynamic Power (PVC/PowerCube®) 82 Watts x 4 @ 4-Ohm 137 Watts x 4 @ 2-Ohm 266 Watts x 2 @ 4-Ohm Bridged Bridgeable: Yes Frequency Response: 20Hz to 20kHz +/- 1.0dB Input Sensitivity: 150 mV - 12 V Circuit Topology Class: Class A/B Efficiency (average): 67% @ 4-Ohm Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0% 2-Ohm: <1.0% Signal Input: Hi/Low level: 2 RCA pair Signal Output Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Function depends upon LP/AP/HP switch position Crossover Controls Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth All-Pass: Yes Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

Cerwin Vega VCU84 Class D Marine Amplifier with Remote Bass Knob Control, 1200 watts Max Power Output, 4 Channel Amplifier, Red and Black + Absolute KIT4 4 Gauge Amp KitGeneral Features: Cerwin Vega Micro Series VCU84 Class-D Full Range 4-Ohm Stable 4-Channel Amplifier RMS Power Rating 4 ohms: 80 watts x 4 channel RMS Power Rating 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel Total power output: 550 watts Compact Universal All-Weather Application CEA-2006 Compliant Amplifier Pulse Width Modulated MOSFET power supply High-Power Digital Class D Advanced Technology IR Chipset Wired remote bass level control included LED power (green) and protect (red) indicators Soft start turn-on 2/4 channel operation Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat sink for extreme heat dissipation Input sensitivity: 200mV-10V Frequency Response: 10 - 30000 Hz Total Harmonic Distortion (THD): 0.5% Signal Noise Ratio: >85 dB Channel Separation: >55 dB Variable high-pass filter: 40 - 400 Hz, 24 dB/octave Variable low-pass filter: 40 - 400 Hz, 24 dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz Fuse Rating: 40 A x 2 8-gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click here for our contact information. Dimensions: 4.02"W x 8.8"L x 1.4"H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Cerwin Vega VCU84 Class D Marine Amplifier with Remote Bass Knob Control, 1200 watts Max Power Output, 4 Channel Amplifier, Red and BlackGeneral Features: Cerwin Vega Micro Series VCU84 Class-D Full Range 4-Ohm Stable 4-Channel Amplifier RMS Power Rating 4 ohms: 80 watts x 4 channel RMS Power Rating 2 ohms: 150 watts x 4 channel Bridged, 4 ohms: 300 watts x 2 channel Total power output: 550 watts Compact Universal All-Weather Application CEA-2006 Compliant Amplifier Pulse Width Modulated MOSFET power supply High-Power Digital Class D Advanced Technology IR Chipset Wired remote bass level control included LED power (green) and protect (red) indicators Soft start turn-on 2/4 channel operation Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat sink for extreme heat dissipation Input sensitivity: 200mV-10V Frequency Response: 10 - 30000 Hz Total Harmonic Distortion (THD): 0.5% Signal Noise Ratio: >85 dB Channel Separation: >55 dB Variable high-pass filter: 40 - 400 Hz, 24 dB/octave Variable low-pass filter: 40 - 400 Hz, 24 dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz Fuse Rating: 40 A x 2 8-gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click here for our contact information. Dimensions: 4.02"W x 8.8"L x 1.4"H Authorized Internet Dealer 1-year Manufacturer's Warranty Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream ST4.1000D Stealth Water-Resistant Compact Amplifier Don’t let these little monsters fool you. The latest and greatest of Class-D full-range technology allows us to pack 10 pounds of KICK YOUR ASS in less than a 2-pound chassis. Once regarded as “dirty power,” class D’s stable performance, thanks to high power capability, maximum efficiencies, and low tolerance components, rivals traditional full-range applications. Minimal power requirements, ultra-micro footprint, unbelievable sound quality, and easy installation make Stealth amplifiers great for any car, motorcycle, boat, or off-road vehicle…Install Anywhere Attitude: Classic/Show Cars, Off-Road Vehicles, Boat/Marine Audio, Motorcycle Audio General Feature Hybrid Aluminum Alloy Heatsink for Optimum Dissipation 2-ohm Stereo & 4-ohm Bridged Full Range Operation 2-ohm Minimum Impedance Monoblock Operation MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-12V High-Level or Low-Level RCA Input Quick Disconnect RCA/High-Level Wire Harness Quick Disconnect Power and Speaker Output Harness Variable 12dB High Pass, Low Pass, & Subsonic Crossovers ST4.1000D Amplifier Stealth Series 4Ch Amp Max Power 1,000 Watts RMS Power 4Ω 90W x 4 RMS Power 2Ω 1 25W x 4 Amplifier Size 3″W x 1.50″H x 7.75″L Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream MR4.1400D Water-Resistant 1400W 4-Channel Amplifier (Boating, Off-Road) We’ve adopted the most optimum Class D performance, reliability, and smaller footprint platform for the Rubicon Nano series amplifiers and present to you Rubicon Nano. At first glance, you’ll notice this amplifier’s color; that’s the coat and finish to help this marinized model work for Marine or Powersports applications. Rubicon Nano’s signal inputs, power/ground, and speaker connections are all relocated to the leading edge of the chassis for an easier, more attractive install. All pre-amp & crossover options are appropriately located on the top surface, making adjustments after installation conceivable. You might not notice embellishments to the circuit board, including increased power supply & output stage components & Monoblock bridging capability. MR4.1400D Amplifier Rubicon Water-Resistant 4Ch Amplifier RMS Power 4Ω 125W x 4 RMS Power 2Ω 175W x 4 RMS Bridged 4Ω 350W x 2 General Feature CD/MP3, AM/FM & USB Receiver Theft Deterrent Detachable Faceplate Bluetooth V2.0 Hands-Free Calling from Enabled Phone A2DP MP3 Audio Playback from Enabled Device Playback from 32GB USB of MP3 & WMA Playback from CD, CDR, CDRW of MP3 & WMA AUX Audio Input for Personal Media Devices Front & Rear Pre-Amp Output 300w 4ch. MOSFET Speaker Outputs Custom & Pre-Set Equalizer Settings Audio Staging Controls 12/24 Hour Digital Clock Remote Control Included ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Soundstream MR5.2000D Rubicon Water-Resistant 5Ch Amplifier We’ve adopted the most optimum Class D performance, reliability, and smaller footprint platform for the Rubicon Nano series amplifiers and present to you Rubicon Nano. At first glance, you’ll notice this amplifier’s color; that’s the coat and finish to help this marinized model work for Marine or Powersports applications. Rubicon Nano’s signal inputs, power/ground, and speaker connections are all relocated to the leading edge of the chassis for an easier, more attractive install. All pre-amp & crossover options are appropriately located on the top surface, making adjustments after installation conceivable. You might not notice embellishments to the circuit board, including increased power supply & output stage components & Monoblock bridging capability. General Feature Max Power 2,000 Watts RMS Power @ 4Ω 75W x 4 + 300W RMS Power @ 2Ω 100W x 4 + 500W RMS Bridged @ 4Ω 200W x 2 + 500W(2Ω) Remote Gain Control Included Low Pass Filter 50Hz-500Hz / (x10) 500Hz-5KHz High Pass Filter 50Hz-500Hz / (x10) 500Hz-5KHz Bass Boost 0-18dB (Ch 5) Bass Boost Frequency 45Hz (Ch 5) Subsonic Filter 20Hz-50Hz (Ch 5) Frequency Response 10Hz-50KHz (Ch 1-4) / 10Hz-150Hz. (Ch 5) S/N 104dB Input Sensitivity 200Mv-6V THD <0.05% Operation Voltage 9V-16V DC Fuse Rating 30A x 3 Dimensions (8.25″W x 2.75″H) 12″ L MR5.2000D Amplifier Rubicon Water-Resistant 5Ch Amplifier RMS Power 4Ω 75W x 4 + 300W RMS Power 2Ω 100W x 4 + 500W RMS Bridged 4Ω 200W x 2 + 500W (2Ω)  ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.