00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine W12S4 12-" Single 4 Ohm Sub Bundle Pair
$199.90
$299.99
2 Alpine W12S4 12" BassLine Series 12" 750W Max (250W RMS) 4-ohm Bass Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W12S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
12-inch single 4Ω subwoofer
Polypropylene and mica cone with poly-foam surround
Peak Power Handling: 750 watts
RMS Power Handling: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelit Ribs (P.W.R.) cone design
Frequency Response: 32Hz-200Hz
5-5/16-inch mounting depth
Recommended Sealed box volume: 1.09 Cu. Ft.
Recommended Ported box volume: 1.91 Cu. ft
Bass For All
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Recommended Box Volume: 0.5-1.5 Cu. ft.3
Top-mount depth: 5-5/16"
Cutout diameter: 10-5/8"
Frequency Response: 22 - 200Hz
Sensitivity: 87.9dB
Resonance Frequency (Fs): 30
Performance: Efficiency & Tight Bass
An optimized magnet circuit allows more focused magnetism in the gap, improving efficiency. This means tighter bass control and more output!
What's in the W12S4 package:
One 12" Subwoofer
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty information
Important Notice!
W12S4 owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine W12S4 12-inch Single 4 Ohm Subwoofer Bundle
$199.90
$299.99
2 Alpine W12S4 12" BassLine Series 12" 750W Max (250W RMS) 4-ohm Bass Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W12S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
12-inch single 4Ω subwoofer
Polypropylene and mica cone with poly-foam surround
Peak Power Handling: 750 watts
RMS Power Handling: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelit Ribs (P.W.R.) cone design
Frequency Response: 32Hz-200Hz
5-5/16-inch mounting depth
Recommended Sealed box volume: 1.09 Cu. Ft.
Recommended Ported box volume: 1.91 Cu. ft
Bass For All
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Recommended Box Volume: 0.5-1.5 Cu. ft.3
Top-mount depth: 5-5/16"
Cutout diameter: 10-5/8"
Frequency Response: 22 - 200Hz
Sensitivity: 87.9dB
Resonance Frequency (Fs): 30
Performance: Efficiency & Tight Bass
An optimized magnet circuit allows more focused magnetism in the gap, improving efficiency. This means tighter bass control and more output!
What's in the W12S4 package:
One 12" Subwoofer
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty information
Important Notice!
W12S4 owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine W12S4 BassLine Series 12" 750W Max (250W RMS) 4-ohm Bass Subwoofer
$99.95
$149.99
Alpine W12S4 12" BassLine Series 12" 750W Max (250W RMS) 4-ohm Bass Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W12S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
12-inch single 4Ω subwoofer
Polypropylene and mica cone with poly-foam surround
Peak Power Handling: 750 watts
RMS Power Handling: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelit Ribs (P.W.R.) cone design
Frequency Response: 32Hz-200Hz
5-5/16-inch mounting depth
Recommended Sealed box volume: 1.09 Cu. Ft.
Recommended Ported box volume: 1.91 Cu. ft
Bass For All
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Recommended Box Volume: 0.5-1.5 Cu. ft.3
Top-mount depth: 5-5/16"
Cutout diameter: 10-5/8"
Frequency Response: 22 - 200Hz
Sensitivity: 87.9dB
Resonance Frequency (Fs): 30
Performance: Efficiency & Tight Bass
An optimized magnet circuit allows more focused magnetism in the gap, improving efficiency. This means tighter bass control and more output!
What's in the W12S4 package:
One 12" Subwoofer
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty information
Important Notice!
W12S4 owner's manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine W12S4 Car Subwoofer 12" Bass Subwoofer 750W Max (250W RMS) 12" BassLine Series Single 4 ohm Car Subwoofer
$99.95
$159.95
Alpine W12S4 12" BassLine Series 12" 750W Max (250W RMS) 4-ohm Bass Subwoofer
Legendary Alpine quality at an affordable priceCar audio enthusiasts know that Alpine is the leader in technology and innovation. Their reputation for developing the most reliable products is legendary. The BassLine product line is their quest to give customers a quality product that won't break the bank.The surround and wattage match made in heaven.The 250 watts of continuous power that the W12S4 handles complements the poly-foam surround that Alpine went with. It provides the best sound quality money can buy at this price point.General Features:
12-inch single 4Ω subwoofer
Polypropylene and mica cone with poly-foam surround
Peak Power Handling: 750 watts
RMS Power Handling: 250 watts
Recommended power range: 50W - 250W RMS
Polypropylene-Mica cone
High-excursion poly-foam surround
Progressive Wavelit Ribs (P.W.R.) cone design
Frequency Response: 32Hz-200Hz
5-5/16-inch mounting depth
Recommended Sealed box volume: 1.09 Cu. Ft.
Recommended Ported box volume: 1.91 Cu. ft
Bass For All
High-strength custom steel frame
8AWG push terminals
2" voice coil
52oz. magnet
Recommended Box Volume: 0.5-1.5 Cu. ft.3
Top-mount depth: 5-5/16"
Cutout diameter: 10-5/8"
Frequency Response: 22 - 200Hz
Sensitivity: 87.9dB
Resonance Frequency (Fs): 30
Performance: Efficiency & Tight Bass
An optimized magnet circuit allows more focused magnetism in the gap, improving efficiency. This means tighter bass control and more output!
What's in the W12S4 package:
One 12" Subwoofer
Adhesive-backed foam gasket
Application Guide
Online product registration information
Warranty information
Important Notice!
W12S4 owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable Amplifier
$799.95
$900.00
Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:
Alpine X-Series X-A70F
Class-D Full Range 2 ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 120 watts x 4 Channel
2 ohms: 175 watts x 4 Channel
1 ohm: ------------N/A-----------
Bridged, 4 Ohms: 350 Watts X 2 Channel
Total power output: 700 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
4/3/2 channel operation
Speaker-level (high-level) inputs
Preamp Outputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .4 - 10V
Low level: .1 - 4V
Frequency Response: 10 - 60,000
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >106dB
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Variable subsonic filter: 50 - 40Hz, -24dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 35A x 3
4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What is in the X-A70M package:
4-Channel amplifier
Two 35A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
2 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
X-A70M owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-A70F Car Amplifier 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable Amplifier
$799.95
$900.00
Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configurations, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:
Alpine X-Series X-A70F
Class-D Full Range 2 ohm Stable 4-Channel Amplifier
RMS Power Rating:
4 ohms: 120 watts x 4 Channel
2 ohms: 175 watts x 4 Channel
1 ohm: ------------N/A-----------
Bridged, 4 Ohms: 350 Watts X 2 Channel
Total power output: 700 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
4/3/2 channel operation
Speaker-level (high-level) inputs
Preamp Outputs
3-way protection circuitry (thermal, overload, and short speaker protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .4 - 10V
Low level: .1 - 4V
Frequency Response: 10 - 60,000
Total Harmonic Distortion (THD): .07%
Signal Noise Ratio: >106dB
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Variable subsonic filter: 50 - 40Hz, -24dB/octave
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 35A x 3
Four gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What is in the X-A70M package:
4-Channel amplifier
Two 35A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
2 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
X-A70M owner's manual
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ALPINE X-A90V
$899.95
$950.00
Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features:
Alpine X-Series X-A90V
Class-D Full Range 2 ohm Stable 5-Channel Amplifier
RMS Power Rating:
4-channel side
4 ohms: 75 watts x 4 channel
2 ohms: 100 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 200 watts x 2 channel
Subchannel
4 ohms: 300 watts x 1 chan.
2 ohms: 500 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote bass level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
5/3 channel operation
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .5 - 10V
Low level: .2 - 4V
Frequency Response:
4-channel: 10 - 60,000Hz
Sub-channel: 8 - 400Hz
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >105dB
Variable high-pass filter: 50 - 400Hz, -24dB/octave
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Subsonic filter: 8 - 40Hz
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
-Channel amplifier
Three 30A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
3 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-A90V X-Series 5-Channel Power Density Amplifier
$899.95
$1,500.00
Alpine X-A90V 900W RMS X-Series Class-D 5-Channel 2 Ohm Stable Amplifier 75 watts RMS x 4 at 4 ohms + 500 watts RMS x 1 at 2 ohmsAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features:General Features:
Alpine X-Series X-A90V
Class-D Full Range 2 ohm Stable 5-Channel Amplifier
RMS Power Rating:
4-channel side
4 ohms: 75 watts x 4 channel
2 ohms: 100 watts x 4 channel
1 ohm: ------------N/A------------
Bridged, 4 ohms: 200 watts x 2 channel
Subchannel
4 ohms: 300 watts x 1 chan.
2 ohms: 500 watts x 1 chan.
1 ohm: ------------N/A------------
Total power output: 900 watts
CEA-2006 Compliant Amplifier
Hi-Res Audio compatible
Wired remote bass level control, Alpine RUX-KNOB.2, available
Included plastic covers available to offer a brushed aluminum finish around the edges
LED power (green) and protect (red) indicators
Soft start turn-on
5/3 channel operation
Speaker-level (high-level) inputs
3-way protection circuitry (thermal, overload, and speaker short protection)
Dual speaker terminals simplify the hookup of multiple speakers
Heavy-duty aluminum alloy heat-sink
Input sensitivity
High level: .5 - 10V
Low level: .2 - 4V
Frequency Response:
4-channel: 10 - 60,000Hz
Sub-channel: 8 - 400Hz
Total Harmonic Distortion (THD): .07%
Signal to Noise Ratio: >105dB
Variable high-pass filter: 50 - 400Hz, -24dB/octave
Variable low-pass filter: 50 - 400Hz, -24dB/octave
Subsonic filter: 8 - 40Hz
Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
Fuse Rating: 30A x 3
4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
Dimensions: 11-3/4"W x 7-5/8"L x 2"H
Authorized Dealer
1-year Manufacturer's Warranty
What's in the box:
-Channel amplifier
Three 30A ATO fuses (installed)
Terminal Cover Left
Terminal Cover Right
Terminal Cover Front
Battery connector plug
3 Speaker connector plugs
Logo Plate (self-adhesive)
4 Self-tapping screws (Length 3/4")
2mm Allen wrench
4mm Allen wrench
Owner's Manual
Alpine Verification Certificate
Limited Warranty
To Customers sheet
Alpine X-A90V owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-S65 Bundle - Two pairs of X-Series 6.5 " Coaxial 2-Way Speakers
$599.90
$1,000.00
Alpine X-S65 Bundle - Two pairs of X-Series 6.5 " Coaxial 2-Way Speakers
Alpine X-S65 660W Max (220W RMS) 6.5" X-Series 2-Way Coaxial Car Speakers
General Features:
6-1/2" Alpine X-Series 2-way Coaxial Car Speakers
Power Handling:
Peak: 660 watts per pair / 330 watts each
RMS: 220 watts per pair / 110 watts each
Nano Fiber cone material
H.A.M.R. surround speaker surround
1" Carbon Graphite Dome Tweeters
Surface mount application tweeter
H.A.M.R surround
Shallow mounting design
Audiophile sound experience
Lightweight Neodymium magnet motor structure
Top-mount Depth: 2-3/8"
Cutout Dimensions: 5-3/8"
Impedance: 4 ohms
Frequency Response: 50 - 50000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers
$649.95
$899.95
Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers
If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles.
All about the build
Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures.
Serious power handling
The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS.
General Features:
6.5 X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount depth: 2-5/16"
Cutout Dimensions: 5-13/32"
4 ohms impedance
Frequency Response: 55 - 50,000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
What is in the X-S65C package:
2 Woofers
2 Woofer grilles
2 Grille badges
2 Tweeters (each has a 26" length of wire attached)
2 Tweeter grilles (installed)
2 Surface mount housings (with tweeters installed)
Two tweeter crossovers (each has attached 32" input and 14" output wires)
2 Rectangular adhesive-backed pads (crossover)
2 Circular adhesive-backed discs (tweeter)
Eight 1-1/8" Screws
Eight 5/8" Screws
8 Speed-clips
4 Speed nuts
Four 5" Zip ties
Warranty information
Important Notice
Online product registration information
Templates and specs on the box
X-S65C owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-S65C X-Series 6-1/2" component speaker system
$399.95
$899.95
Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers
If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles.
All about the build
Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures.
Serious power handling
The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS.
General Features:
6.5 X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount depth: 2-5/16"
Cutout Dimensions: 5-13/32"
4 ohms impedance
Frequency Response: 55 - 50,000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
What is in the X-S65C package:
2 Woofers + 2 Woofer grilles
2 Grille badges
2 Tweeters (each has a 26" length of wire attached)
2 Tweeter grilles (installed)
2 Surface mount housings (with tweeters installed)
Two tweeter crossovers (each has attached 32" input and 14" output wires)
2 Rectangular adhesive-backed pads (crossover)
2 Circular adhesive-backed discs (tweeter)
Eight 1-1/8" Screws + Eight 5/8" Screws
8 Speed-clips + 4 Speed nuts
Four 5" Zip ties
Warranty information
Important Notice
Online product registration information
Templates and specs on the box
X-S65C owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine X-S65C X-Series 6.5 " Component 2-Way Speakers
$349.95
$899.95
Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers
If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to leap at the premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile to fit in a wide array of vehicles.
All about the build
Alpine uses a powerful magnet and a super-efficient motor structure to strengthen the 6-1/2" woofer in lower frequencies. The woofer cone uses a specialized fiber for extreme rigidity, while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in extreme temperatures.
Serious power handling
The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll have a soaring system, thanks to power handling up to a whopping 120 watts RMS.
General Features:
6.5 X-Type 2-Way Component System
Power Handling:
Max: 720 W per set/ 360 W per side
RMS: 240 W per set/ 120 W per side
Recommended power range: 10 - 120W RMS
Hi-Res Audio compatible
Nano-fiber woofer cone
H.A.M.R. surround
1" carbon graphite tweeter
Adjustable tweeter attenuation: 0dB, +3dB, -3dB
Adjustable tweeter phase: Normal or reverse
A-Pole type neodymium magnet
Top-mount depth: 2-5/16"
Cutout Dimensions: 5-13/32"
4 ohms impedance
Frequency Response: 55 - 50,000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
What is in the X-S65C package:
2 Woofers + 2 Woofer grilles
2 Grille badges
2 Tweeters (each has a 26" length of wire attached)
2 Tweeter grilles (installed)
2 Surface mount housings (with tweeters installed)
Two tweeter crossovers (each has attached 32" input and 14" output wires)
2 Rectangular adhesive-backed pads (crossover)
2 Circular adhesive-backed discs (tweeter)
Eight 1-1/8" Screws + Eight 5/8" Screws
8 Speed-clips + 4 Speed nuts
Four 5" Zip ties
Warranty information
Important Notice
Online product registration information
Templates and specs on the box
X-S65C owner's manual
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.