Alpine (1201)

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine SS57 5x7" Rear Factory Speaker Replacement Kit For 1999-2002 Ford Expedition Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine SS57 5x7" Rear Factory Speaker Replacement Kit For 1999-2002 Ford Expedition Alpine S-S57 460W Max (150W RMS) 6x8/5x7" Type S Series 2-Way Coaxial Car Speakers IT FITS IN MOST COMMON APPLICATIONS To meet the needs of the most common applications in speaker replacement today, we've introduced a 5x7-inch component set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. With its innovative technology, this component set makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. INCREASED DRIVING POWER AND CONTROL The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models have a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor. The S-Series speakers are the first in the industry to use CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. The edges are naturally weaker than the center on a standard, off-the-shelf oval cone due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are generally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during molding is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 5"x7" S-Type Series TYPE Car Speakers/Component System Peak Power Handling: 460 watts per pair / 230 watts each RMS Power Handling: 150 watts per pair / 75 watts each Carbon fiber reinforced plastic cone Patented HAMR surround 1.1" Silk dome tweeter CTA-2031 compliant speakers 30MM Voice Coil Top-mount Depth: 2-11/32" Cutout Dimensions: 4-15/16" x 7-3/16" 4 ohms impedance Frequency Response: 73 - 22000 Hz Sensitivity: 88dB Authorized Dealer 1-year Manufacturer's Warranty What's in the S-S57 package: S-S57 owner's manual Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire Eight 1-1/4" Screws Eight M4x6mm Machine screws 8 Speed clips Warranty information Online product registration information Important Notice sheet Template and specs on the box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine Status HDZ-653 600W Hi-Res 6-1/2" (16.5cm) 3-Way Component Speaker Set Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration.Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-653 3-Way speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer, 96mm mid-range, and 70mm ring-radiator tweeter with a 25mm voice coil. They also include high-end speaker x-overs.All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They get very close to the Alpine F#1 Status speaker's look and feel, using a similar construction, motor assembly, and identical build materials for the highest sound quality. General Features: 6-1/2" Alpine Status Hi-Res Series 3-way Component Speakers Car Speakers Peak Power Handling: 600 watts per set / 300 watts on each side RMS Power Handling: 200 watts per set / 100 watts on each side Carbon Composite cone material Double-Gathered Edge speaker surround 1" Dome Tweeters Slim fit design Hi-Res audio certified High-end X-Over networks Integrated Wave Guide on all speakers Aluminum die-cast baskets Backed carbon fiber cones CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2.63" Cutout Dimensions: 6.77" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Speaker grilles included Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the package HDZ-653: HDZ-653 owner's manual Two woofers Two woofer grilles Two midrange Two midrange grilles Two tweeters Two threaded tweeter mounting rings Two crossovers Eight 1-1/8" M4 Screws Sixteen 1-1/8" M3 Screws  Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine Status HDZ-653S 600W Hi-Res 6-1/2" (16.5cm) 3-Way Component Speaker Set Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also highly flexible: all components can be purchased and used in a “stand-alone” configuration.Alpine Status offers a wide range of Hi-Res Audio-enabled speakers for the audiophile looking to build an ideal sound system. The HDZ-653 3-Way speaker set with a high-resolution bandwidth of 55Hz – 40kHz includes a 170mm door woofer, 96mm mid-range, and 70mm ring-radiator tweeter with a 25mm voice coil. They also include high-end speaker x-overs.All speaker cones are made from the same Carbon Composite material to create a unified timbre identity during playback. They get very close to the Alpine F#1 Status speaker's look and feel, using a similar construction, motor assembly, and identical build materials for the highest sound quality. General Features: 6-1/2" Alpine Status Hi-Res Series 3-way Component Speakers Car Speakers Peak Power Handling: 600 watts per set / 300 watts on each side RMS Power Handling: 200 watts per set / 100 watts on each side Carbon Composite cone material Double-Gathered Edge speaker surround 1" Dome Tweeters Slim fit design Hi-Res audio certified High-end X-Over networks Integrated Wave Guide on all speakers Aluminum die-cast baskets Backed carbon fiber cones CEA-2031 compliant: Yes Ferrite magnet motor structure Top-mount Depth: 2 3/4" Cutout Dimensions: 5 5/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Speaker grilles included Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the package HDZ-653S: HDZ-653S owner's manual Two woofers Two woofer grilles Two midrange Two midrange grilles Two tweeters Two threaded tweeter mounting rings Two crossovers Eight 1-1/8" M4 Screws Sixteen 1-1/8" M3 Screws  Warranty information Online product registration information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S2 1000W Peak 10" SWT Series Single 2-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S2 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S2 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 2 ohms. General Features: 10" SWT Series Single 2-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S2 package: SWT-10S2 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2) Alpine SWT-10S4 10" 1000W Shallow Slim Subwoofers+AudioControl The Epicenter Bass Processor 2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information Audio Control THE EPICENTER 2-Channel Concert Series Digital Bass Restoration Processor with Bass Remote Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder.  The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard. General Features: Active Epicenter Series 2 channel digital bass restoration and line output converter Designed to integrate with after-market or factory OEM systems Digital bass restoration restores bass roll-off in factory systems Speaker level inputs Bass/Gain level remote: Yes Signal-Sensing turn-on: Yes Preamp outputs: 1 pair Bass Maximizer circuitry Multiple turn-on options PFM Subsonic Filter bypass option Selectable impedance load: 20, 60, 20k ohms Frequency response: 10 - 100,000 Hz Subsonic filter: 20 Hz, 12/dB octave Signal-to-noise ratio: >130 dB Total harmonic distortion (THD): 0.003% Fuse Rating: 1A x 1  Dimensions: 8-1/16"W x 1-1/4"H x 6-3/4"H Weight: 1.70lbs Authorized Internet Dealer 5 Year Manufacturer's Warranty (*when installed by an authorized AudioControl dealer) What is in the THE EPICENTER package: The Epicenter owner's manual Pre-amp Bass Restoration Processor black Remote dash mount control ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. An SWT-10S4 will work well in a ported or sealed box so you can get your favorite bass tone, boomy or tight. The power takes for top performance, and you'll want to pick an amplifier that delivers between 300 and 500 watts RMS at 4 ohms. This single voice coil, the 4-ohm sub, will draw the maximum output power from a subwoofer amplifier when used along with a second SWT-10S2 in a system. If you're planning on running a pair, look for an amp that delivers between 600 and 1000 watts RMS at 4 ohms. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SWT-10S4 1000W Peak 10" SWT Series Single 4-ohm Shallow Mount Subwoofer Right size, Right sound. Here's a big bass breakthrough for truck lovers. Alpine engineered their SWT-10S4 10" subwoofer to go behind your seat and sound especially good in the limited space of a truck cab. This deep-sounding, high-performance sub works well in shallow enclosures that'll fit behind or under the seat in your truck. A "high amplitude" surround allows more cone travel than a regular sub, so the SWT-10S4 can push more air and play louder. Airflow-insured subs get hot as they play, and the heat usually gets vented away via a port in the back of the sub's pole piece. Alpine recessed the pole port and added cooling air vents on the sides of the frame, allowing you to use an enclosure with an inside clearance of as little as 4-3/16" without blocking critical airflow. General Features: 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer Peak Power Handling: 1,000 watts RMS Power Handling: 350 watts Recommended Power Range: 100W - 350W Poly-Mica Dust Cap & Pulp-Kevlar Polyurethane Foam Surround H.A.M.R. Surround Technology Spiral Cut Aluminum Former 65mm Voice Coil with High-Temp 4-Layer SVC Winding 8AWG Push Terminals Top-mount depth: 4-3/16" Mounting Diameter: 8-15/16'' Frequency Response: 30 - 200 Hz Sensitivity: 84.8 dB Authorized Dealer 1-year Manufacturer's Warranty What is in the SWT-10S4 package: SWT-10S4 owner's manual 10" Thin-mount subwoofer Online product registration information Warranty information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine SXE1726S 6.5" Speakers Compatible 1995-2006 GM Vehicles CAR Truck Front & Rear Door 2 PAIR GMSB345 Pair Of Speaker Adapter For 1995-2006 Gm Vehicles 2 PAIR Metra 72-4568 Speaker Harness for Select GM Vehicles Alpine SXE-1726S 6.5" 220w 2-Way Car Audio Coaxial Speakers General Features: Rated Power: 40 Watts RMS Peak Power: 220 Watts Nominal Impedance: 4 Ohm Frequency Response: 60Hz - 200Hz Sensitivity: 92dB/W/m Neodymium Magnet Mylar-Titanium Balanced Dome Tweeter Ferrite Magnet Long Fibre Natural Pulp Cone High Polymer Foam Edge Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the SXE-1726S package: 6.5" Speakers (2) Mounting screws (8) Mounting screws (8) Speaker connection cables (2) User manual SXE-1726S owner's manual ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.