alpine (1173)

Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods One Pair & Absolute KIT8 8 Gauge / 1000 Watt Complete Amplifier Hookup Installation Kit Bundle You’ve enjoyed the Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now, you can get Alpine sound on various power sports and all-terrain vehicles for an uninterrupted music experience beyond the vehicle. The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90 degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on various side-by-side, UTV, and other All-Terrain vehicles. General Features: Enclosed are 6.5” Coaxial 2-Way Speakers 1” Teteron Dome Tweeter Drivers Rated IP55 Weather-Resistant Enclosures rated IP65 Weather-Resistant Steel Frame ASA 978 B+ Fiberglass Built-in pro-style Folding Style Clamp that will fit 1.5"-2" Rails. Rotating Coated Aluminum Base 90-degree Plug with 20AWG Pigtail 90W RMS 225W Peak Power Handling Nominal Impedance 4? 50-22kHz Frequency Response Santoprene Woofer Material 25mm voice coil Diameter: 6.5 Inches Impedance: 4 Ohm Frequency Response: 50-22000 Hz Peak Power Handling: 225 Watts Color: Black UPC: 793276084606 Weight: 7 Authorized Internet Dealer What is in the SPV-65-SXS package: SPV-65-SXS owner's manual 2 Speaker pods with integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on other ends) 2 Vinyl logo badges 2 Metal logo badges Instruction manual Warranty information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods One Pair You’ve enjoyed the Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now you can get Alpine sound on various power sports and all-terrain vehicles for an uninterrupted music experience beyond the vehicle. The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90 degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on various side-by-side, UTV, and other All-Terrain vehicles. General Features: Enclosed are 6.5” Coaxial 2-Way Speakers 1” Teteron Dome Tweeter Drivers Rated IP55 Weather-Resistant Enclosures rated IP65 Weather-Resistant Steel Frame ASA 978 B+ Fiberglass Built-in pro-style Folding Style Clamp that will fit 1.5"-2" Rails. Rotating Coated Aluminum Base 90-degree Plug with 20AWG Pigtail 90W RMS 225W Peak Power Handling Nominal Impedance 4? 50-22kHz Frequency Response Santoprene Woofer Material 25mm voice coil Diameter: 6.5 Inches Impedance: 4 Ohm Frequency Response: 50-22000 Hz Peak Power Handling: 225 Watts Color: Black UPC: 793276084606 Weight: 7 Authorized Internet Dealer What is in the SPV-65-SXS package: SPV-65-SXS owner's manual 2 Speaker pods with integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on other ends) 2 Vinyl logo badges 2 Metal logo badges Instruction manual Warranty information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods One Pair You’ve enjoyed the Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now you can get Alpine sound on various power sports and all-terrain vehicles for an uninterrupted music experience beyond the vehicle. The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90 degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on various side-by-side, UTV, and other All-Terrain vehicles. General Features: Enclosed are 6.5” Coaxial 2-Way Speakers 1” Teteron Dome Tweeter Drivers Rated IP55 Weather-Resistant Enclosures rated IP65 Weather-Resistant Steel Frame ASA 978 B+ Fiberglass Built-in pro-style Folding Style Clamp that will fit 1.5"-2" Rails. Rotating Coated Aluminum Base 90-degree Plug with 20AWG Pigtail 90W RMS 225W Peak Power Handling Nominal Impedance 4? 50-22kHz Frequency Response Santoprene Woofer Material 25mm voice coil Diameter: 6.5 Inches Impedance: 4 Ohm Frequency Response: 50-22000 Hz Peak Power Handling: 225 Watts Color: Black UPC: 793276084606 Weight: 7 Authorized Internet Dealer What is in the SPV-65-SXS package: SPV-65-SXS owner's manual 2 Speaker pods with integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on other ends) 2 Vinyl logo badges 2 Metal logo badges Instruction manual Warranty information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine SPV-65-SXS Marine 6-1/2” 225W Weather-Resistant Coaxial Speaker Pods One Pair & Absolute KIT10 10 Gauge / 800 Watt Complete Amplifier Hookup Installation Kit Bundle You’ve enjoyed the Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now, you can get Alpine sound on various power sports and all-terrain vehicles for an uninterrupted music experience beyond the vehicle. The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90 degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on various side-by-side, UTV, and other All-Terrain vehicles. General Features: Enclosed are 6.5” Coaxial 2-Way Speakers 1” Teteron Dome Tweeter Drivers Rated IP55 Weather-Resistant Enclosures rated IP65 Weather-Resistant Steel Frame ASA 978 B+ Fiberglass Built-in pro-style Folding Style Clamp that will fit 1.5"-2" Rails. Rotating Coated Aluminum Base 90-degree Plug with 20AWG Pigtail 90W RMS 225W Peak Power Handling Nominal Impedance 4? 50-22kHz Frequency Response Santoprene Woofer Material 25mm voice coil Diameter: 6.5 Inches Impedance: 4 Ohm Frequency Response: 50-22000 Hz Peak Power Handling: 225 Watts Color: Black UPC: 793276084606 Weight: 7 Authorized Internet Dealer What is in the SPV-65-SXS package: SPV-65-SXS owner's manual 2 Speaker pods with integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on other ends) 2 Vinyl logo badges 2 Metal logo badges Instruction manual Warranty information Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov