Car Audio & Video
Car Speaker Bundle
Car Stereo Bundle
Marine Audio & Recreation
Car Stereo
Rearview Backup Cameras
Car Subwoofer
temporary import
Car Speaker
CAR AMPLIFIERS
Loaded Car Subwoofer Enclosure
CAR AMPLIFIERS BUNDLES
LOADED ENCLOSURES BOX
Under Car Seat Powered Subwoofers
Speaker Grill Mesh Cover
CAR AMPLIFIERS ACCESSORIES
Car Subwoofer Bundle
Car Subwoofers with Amplifier and Box Packages
Bluetooth Speakers
Car Component Speaker
Subwoofer Level Controller
Car Amplifier Wiring Amp Kit
Remote Bass Knob
Car EQ's & Sound Processors
Back to all products
alpine


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W10D2 Car Subwoofer 1800W 10" Dual 2 Ohm Car Subwoofer with Sealed Box
$289.95
$400.00
Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer with Absolute SS10 Sealed Subwoofer Box
Alpine introduces the all-new S-Series Subwoofers. Their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame in twelve-, ten-, and eight-inch sizes. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces.
The S-Series Subwoofers incorporates two strontium ferrite magnets stacked together, providing increased motor strength and excursion and ultimately delivering accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
10" 2 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-W10D2 package:
S-W10D2 owner's manual
One 10" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide
Online product registration information
Warranty Information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W10D2 Car Subwoofer 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer
$239.95
$250.00
Alpine S-W10D2 1800W Max (600W RMS) 10" S-Series Dual 2 Ohm Car Subwoofer
Alpine introduces the all-new S-Series Subwoofers; their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
10" 2 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-W10D2 package:
S-W10D2 owner's manual
One 10" Dual 2-ohm voice coil subwoofer
1 Rubber concealing ring
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide
Online product registration information
Warranty Information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W10D2 RUX-KNOB.2 KTA-200M Mono Power Pack Class-D Amp with S-W10D2 10" Subwoofer and RUX-KNOB.2 Bass Knob
$569.95
$799.99
Alpine KTA-200M Mono Power Pack Amp with Alpine S-W10D2 10" Subwoofer and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W10D2 S-Series 10" Dual 2-Ohm Subwoofer, and an Alpine RUX-KNOB.2 Remote Bass Knob.
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
General Features:
Power Stack capable with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse not included with the amplifier
Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine S-W10D2 S-Series 10" Subwoofer with Dual 2-Ohm Voice Coils.
General Features:
10" 2 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
Alpine RUX-KNOB.2 Remote Bass KnobWith the RUX-KNOB, get full control over your amplifier conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W10D4 10" Type S Car Audio Subwoofer with Absolute SS10 Custom Sub Box Enclosure Package
$289.95
$350.00
Alpine S-W10D4 10" Type S Car Audio Subwoofer with Absolute SS10 Custom Sub Box Enclosure Package
This Package Includes the Following Items:
1 x Absolute SS10 Car Audio Single 10" Sealed Subwoofer Sub Box Enclosure MDF Wood
1 x Alpine S-W10D4 Car Audio Type S Series Sub Dual 4 Ohm 1200W Peak 10" Subwoofer
Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer
General Features:
10" 4 ohm S-Series (Type-S) Subwoofer
Power Handling:
Peak: 1800 watts
RMS: 600 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-W10D4 package:
Alpine S-W10D4 owner's manual
One 10" Dual 4-ohm voice coil subwoofer
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W10D4 1800W 10" S-Series Dual 4 Ohm Car Subwoofer
$239.95
$319.90
Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer
Alpine introduces the all-new S-Series Subwoofers; their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
10" 4 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-W10D4 package:
S-W10D4 owner's manual
One 10" Dual 4-ohm voice coil subwoofer
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W10D4 Car Subwoofer
1800W Max, 600W RMS 10" S-Series Dual 4 Ohm Car Subwoofer $239.95 $319.90
1800W Max, 600W RMS 10" S-Series Dual 4 Ohm Car Subwoofer $239.95 $319.90
Alpine S-W10D4 1800W Max (600W RMS) 10" S-Series Dual 4 Ohm Car Subwoofer
Alpine introduces the all-new S-Series Subwoofers; their unique design substantially improves bass output and provides installation versatility. Each S-Series subwoofer uses a custom-stamped steel frame and is available in twelve, ten, and eight-inch. These high-strength frames were designed to withstand the rigors of the improved S-Series motor. They have frame leg vents, a vented back plate to help cool the subwoofer voice coil and motor parts, and a shallow design to help fit in smaller spaces.
The S-Series Subwoofers incorporate two strontium ferrite magnets stacked together, providing increased motor strength and excursion, ultimately delivering an accurate bass to your music. The convenient push-type insert terminals with a dual voice coil jumper system will significantly reduce installation time. Just strip the speaker insulation at the wire end, then insert the bare wire into the hole of the spring-loaded push terminal. At the same time, the concealed mount gasket system creates a clean, finished appearance for any vehicle.
General Features:
10" 4 ohm S-Series (Type-S) Subwoofer
RMS Power Handling: 600 watts
Peak Power Handling: 1800 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 4-11/16"
Cutout diameter: 8-13/16
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 33 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-W10D4 package:
S-W10D4 owner's manual
One 10" Dual 4-ohm voice coil subwoofer
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W12D2 RUX-KNOB.2 KTA-200M Mono Power Pack Amp with 12" Subwoofer and Bass Knob
$569.95
$799.95
Alpine KTA-200M Mono Power Pack Amp with Alpine S-W12D2 12" Subwoofer and Bass Knob
This bundle includes an Alpine KTA-200M Mono 400-Watt Power Pack Amplifier, an Alpine S-W12D2 S-Series 12" Dual 2-Ohm Subwoofer, and an Alpine RUX-KNOB.2 Remote Bass Knob.
Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier
The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupy the same depth as a traditional 2-DIN chassis, resulting in an easy-to-hideaway bass solution that adds more power to the sound system without occupying space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier in a compact size, easy installation, and overall power. Both amplifiers, designed to “stack” behind the iLX-W650 or similar 2-DIN radio, can also be used as standalone solutions in vehicles that lack space for a traditional amplifier. The KTA-200M produces 400 watts with Alpine’s DPP technology. During robust or “dynamic” passages of music, DPP will adapt to the music's needs by adjusting the amplifier's gain and delivering bursts of power that match the music's peak demands. Alongside this is the new voltage-adapting input circuit, which maintains the maximum source signal level without clipping.
General Features:
Power Stack is compatible with the Alpine iLX-W650
compact mono subwoofer amplifier
Alpine’s Class D Amplifier Circuit with DPP
Dynamic Peak Power (DPP) technology adds a burst of power when needed
CTA-2006 compliant
100W x 1 RMS @ 4Ω, Power Outputs
200W x 1 RMS @ 2Ω, Power Outputs
400W x 1 DPP @ 4Ω, Power Outputs
Signal to Noise Ratio 85dB (ref. 1W into 4Ω)
≤0.1% THD+N (ref. 10W into 2Ω)
Single-side 22-pin connector
selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave)
preamp and speaker-level inputs
RCA inputs (selectable, Low range=0.2-4V)
Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable)
wiring, hardware, and fuse are not included with the amplifier
Power Stack bracket included for mounting the amp behind the Alpine iLX-W650 digital multimedia receiver
Authorized Dealer
1-year Warranty
Alpine S-W12D2 S-Series 12" Subwoofer with Dual 2-Ohm Voice coils.
General Features:
High Amplitude Multi-Roll Surround
High Strength Steel Frame
Perimeter venting with an airflow management system
High-excursion underhung voice coil configuration
Compound radius curve extended pole geometry
Airflow-optimized dual flare pole vent
65mm voice coil with high-temp 5-layer DVC winding on aluminum former
high-grade strontium ferrite magnets
15MM Xmax
64mm Xmech
600W RMS
5-1/16" mounting depth
10-9/16" Cutout Diameter
Power handling: 250-600W RMS
Sealed Enclosure range: .55-1.0 ft^3
Vented Enclosure Range: 1.0-1.5 ft^3
Vented tuning range: 32-37Hz
Alpine RUX-KNOB.2 Remote Bass Knob
With the RUX-KNOB installed inside the vehicle cabin, you can conveniently control your PDX-M6 or PDX-M12 amplifier and easily adjust its bass gain while seated inside.
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W12D4 12" Type S Car Audio Subwoofer with Rearfire Sealed Universal Custom Sub Box Enclosure Car Stereo
$299.95
$400.00
Universal Car Stereo Rearfire Sealed Single 12" Alpine S-W12D4 Type S Car Audio Subwoofer Custom Sub Box Enclosure Package
This Package Includes the Following Items:
1 x Absolute SS12 Car Audio Single 12" Sealed Subwoofer Sub Box Enclosure MDF Wood
1 x Alpine S-W12D4 Car Audio Type S Series Sub Dual 4 Ohm 1200W Peak 10" Subwoofer
Alpine S-W12D4 1800W Max (600W RMS) 12" S-Series Dual 4 Ohm Car Subwoofer
VERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been redesigned from the ground up. The mounting depth of the 10” and 12” subwoofers is almost 1” more profound than that of previous models: just over 4.5” for the 10” models and just over 5” for the 12” models. This allows them to fit into a wide variety of installation applications.
General Features:
12" 4 ohm S-Series (Type-S) Subwoofer
Power Handling:
Peak: 1800 watts
RMS: 600 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 5-1/16"
Cutout diameter: 10-9"
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 31 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-W12D4 package:
Alpine S-W12D4 owners manual
One 12" Dual 4-ohm voice coil subwoofer
Two 3" jumper cables (each has a single banana connector on each end)
Subwoofer Application Guide
Online product registration information
Warranty information
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W12D4 Car Subwoofer 1800W Max, 600W RMS 12" Type-S Series Dual 4 Ohm Car Subwoofer
$269.95
$300.00
Alpine S-W12D4 1800W Max (600W RMS) 12" Type-S Series Dual 4 Ohm Car Subwoofer
VERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers are almost 1” more shallow than previous models at just over 4.5” for the 10” models and just over 5” for the 12” models, allowing them to fit into a wide variety of installation applications.
General Features:
12" 4 Ohm Type-S Series Subwoofer
Power Handling:
Peak: 1800 watts
RMS: 600 watts
Recommended power range: 250- 600W RMS
Pulp/Kevlar Cone
High Amplitude Multi-Roll (HAMR) Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Optimized Dual Flare Pole Vent
High Strength Steel Frame Basket
8 AWG Push Terminals with VC Configuration Jumpers
Dual Voice Coil
High-Grade Strontium Ferrite Magnets
Top-mount depth: 5-1/16"
Cutout diameter: 10-9"
Frequency Response: 26- 200Hz
Sensitivity: 86.4dB
Resonance Frequency (Fs): 31 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What is in the S-W12D4 package:
Alpine S-W12D4 owners manual
One 12" Dual 4-ohm voice coil subwoofer
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty Information
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W8D2 Car Subwoofer
900W Max, 300W RMS 8" S-Series Dual 2 Ohm Car Subwoofers $209.95 $180.00
900W Max, 300W RMS 8" S-Series Dual 2 Ohm Car Subwoofers $209.95 $180.00
Alpine S-W8D2 900W Max (300W RMS) 8" S-Series Dual 2 Ohm Car Subwoofers
ADD BASS TO PRACTICALLY ANY VEHICLE
Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic foot. It is perfect for under-seats, behind rear bench seats in trucks, or even in some door applications.
General Features:
8" 2 Ohm S-Series Subwoofer
Power Handling:
Peak: 900 watts
RMS: 300 watts
Recommended power range: 150 - 300 RMS
Kevlar Reinforced Pulp Cone
HAMR Santoprene Rubber Surround
High Strength Steel Frame Basket
Concealed Mount Gasket
High Strength Steel Frame Basket
10 AWG Push Terminals
High Excursion Underhung Voice Coil Configuration
High-Grade Strontium Ferrite Magnet
Top-mount depth: 3-3/4"
Cutout diameter: 6-7/8"
Frequency Response: 34 - 200 Hz
Sensitivity: 83dB
Resonance Frequency (Fs): 48 Hz
Authorized Dealer
1-year Manufacturer's Warranty
What's in the S-W8D2 package:
8" Dual 2-ohm voice coil subwoofer
Alpine S-W8D2 owner's manual
1 Rubber concealing ring
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
Important Notice!
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S-W8D4 Car Subwoofer
900W Max (300W RMS) 8" S-Series Dual 4 Ohm Car Subwoofers $209.95 $200.00
900W Max (300W RMS) 8" S-Series Dual 4 Ohm Car Subwoofers $209.95 $200.00
Alpine S-W8D4 900W Max (300W RMS) 8" Type S Series Dual 4 Ohm Car Subwoofer
ADD BASS TO PRACTICALLY ANY VEHICLE
Don’t think you have room for a subwoofer? Think again. The new S-W8D2 and S-W8D4 8” S-Series subwoofers have a shallow mounting depth of just 3-3/4” and can be used in a sealed box enclosure as small as .15 cubic feet. It is perfect for under-seats, behind rear bench seats in trucks, or even in some door applications.
General Features:
8" 4 Ohm Type S Series Subwoofer
Power Handling:
Peak: 900 watts
RMS: 300 watts
Recommended Power Range: 150 - 300 Watts
Kevlar Reinforced Pulp Cone
HAMR Santoprene Rubber Surround
Progressive Spider with Reinforced Layer Tinsel Leads
Compound Radius Curve Extended Pole Geometry
Perimeter Vented Frame with Airflow Management System
10 AWG Push Terminals
35mm Underhung Voice Coils
Concealed Mount Gasket
34oz Ferrite Magnet
Top-mount depth: 3-3/4"
Cutout diameter: 6-7/8"
Frequency Response: 34-200Hz
Authorized Dealer
1-year Manufacturer's Warranty
Priced Individually
What's in the S-W8D4 package:
8" Dual 4-ohm voice coil subwoofer
Alpine S-W8D4 owner's manual
1 Rubber concealing ring
Two 3" jumper cables
Subwoofer Application Guide
Online product registration information
Warranty information
Important Notice!
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov


00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine S2-A36F 4-Channel Car Amplifier, 60 Watts RMS x 4
$299.95
$299.99
Alpine S2-A36F 600W Next Generation S-Series Hi Res Class-D 4-Channel Car Amplifier
The next generation of Alpine S-Series amplifiers is designed to enhance your car audio experience without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to your car's front and rear speakers, adding sweet, clear sound to your vehicle.The amp brings your music to life by being Hi-Res Audio certified, with its precise details and emotional power revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs so that you can install it in almost any vehicle, even with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
General Features:
Hi-Res Audio Certified (Up to 40kHz)
Power Rating: 14.4V, < 0.3% THD +N
Power Output: 60W RMS x 4 @ 4Ω, 90W RMS x 4 @ 2Ω
Bridged Power: 180W RMS x 2 @ 4Ω
4-Channel Amplifier
Alpine’s Class D Amplifier Circuit
Two-sided terminal layout
Built-in Selectable/ Adjustable Crossovers
Mid-Bass EQ Input for more power
Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)
Dimensions: 8.7” W x 2.25” H x 8.25” D
Weight: 4 lbs, 13 oz
S/N Ratio: >83dB
Frequency Response: 20Hz – 40kHz
Damping Factor: >100
Owner’s Manual
4 Self-tapping screws
Hexagon wrench
What is in the S2-A36F package:
S2-A36F owner's manual
4-Channel amplifier
One 40-amp ATO fuse
Four 3/4" Screws
2mm Allen wrench
Alpine Verification Certificate
Warranty information
Online product registration information
Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.