Alpine (1168)

Alpine S-S69C 520W Max (170W RMS) 6" x 9" Type-S Series 2-Way Component Car Speakers Alpine's S-Series Speakers have been redesigned with upgrades to voice coil size and cone material to provide premium sound quality. The new benchmark for entry OEM upgrades! UNIVERSAL APPLICATIONSTo meet the needs of the most common applications in speaker replacement today, we’ve introduced a new 6x9-inch component speaker set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. EFFICIENT PERFORMANCE The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6" x 9" Type-S Series 2-Way Component System Power Handling: Peak: 520 watts per set / 260 watts on each side RMS: 175 watts per set / 85 watts on each side Carbon-reinforced polypropylene cone Rubber surround 1" Silk dome tweeter CEA-2031 compliant speakers Top-mount Depth: 2-15/16" 4 ohms impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB 1-year manufacturer warranty What is in the S-S69C package: S-S69C owner's manual 2 Woofers 2 Tweeters  2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x60mm Machine screws  Eight M4 Nuts 8 Speed clips 8 Split lock washers Warranty information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-S69C 520W Max (170W RMS) 6" x 9" Type-S Series 2-Way Component Car Speakers Alpine's S-Series Speakers have been redesigned with upgrades to voice coil size and cone material to provide premium sound quality. The new benchmark for entry OEM upgrades! UNIVERSAL APPLICATIONSTo meet the needs of the most common applications in speaker replacement today, we’ve introduced a new 6x9-inch component speaker set to offer newer domestic trucks and cars the ability to upgrade the sound quality of their vehicle. This component set with its innovative technology makes it a simple solution to getting Alpine sound in many of these vehicles on the road today. EFFICIENT PERFORMANCE The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance. The ability to manipulate the CFRP material during the molding process is currently exclusive to Alpine and the S-Series speakers. Alpine has three patent-pending procedures in support of this innovative manufacturing process. General Features: 6" x 9" Type-S Series 2-Way Component System Power Handling: Peak: 520 watts per set / 260 watts on each side RMS: 175 watts per set / 85 watts on each side Carbon-reinforced polypropylene cone Rubber surround 1" Silk dome tweeter CEA-2031 compliant speakers Top-mount Depth: 2-15/16" 4 ohms impedance Frequency Response: 65 - 22000 Hz Sensitivity: 90dB 1-year manufacturer warranty What is in the S-S69C package: S-S69C owner's manual 2 Woofers 2 Tweeters  2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets Eight 1-3/16" Screws Eight M4x60mm Machine screws  Eight M4 Nuts 8 Speed clips 8 Split lock washers Warranty information ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box Alpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers. This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure. Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the package: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V 10" 600w S-S10D4 Subwoofer Ported Sub Enclosure Box Alpine Amp S-A60M & 4 Gauge KIT4 Amp Kit Package Includes: (1) Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine S-A60M 600-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box Alpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers. This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure. Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Alpine S-A60M 600-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. THE BETTER CHOICE IN PERFORMANCE VALUE Perfect for beginners and enthusiasts alike, the S-Series amplifiers have the technology to improve your music experience yet are still friendly on your wallet. Used in conjunction with our advanced S-Series speakers and subwoofers, they create a complete sound system that takes your in-vehicle music experience to the next level. SMALL BUT MIGHTY The S-Series amplifiers are designed to fit anywhere. Measuring at 8”, these amplifiers can be mounted under seats or behind panels. Though they sport a compact footprint on the outside, they produce impressive power on the inside. At 600 watts RMS, the S-A60M is a powerful partner to drive the versatile S-Series subwoofers. RELIABLE PERFORMANCE The S-Series amplifiers contain technology that was previously only available in our premium lineup of amplifiers, the R- and X-Series models. The S-Series models are based on Alpine’s intelligent amplifier platform that ensures superior sound reproduction and precision imaging. With an improved heat sink, and protection circuit design that eliminates thermal shut-down, your music will keep playing no matter where your drive takes you. General Features: Alpine’s Class D Amplifier Circuit CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V ≤ 1% THD+N); 600W RMS x 1 (2ohm, 14.4V ≤ 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm) THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10Hz-400Hz (+/-3 dB) Damping Factor: > 1000 Remote bass knob compatible (requires RUX-KNOB.2, sold separately) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provides optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self-tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-200M Amplifier Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-200M Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTA-200M Compact 200 watts RMS Class D Monoblock Power Pack Amplifier The KTA-200M fits in the open space behind Alpine’s iLX-W650 7-inch Mmech-Less (no CD/ DVD) Audio/Video receiver to create Alpine’s unique Power Stack application. The compact footprint of the amplifier (7-inch W x 1.5-inch H x 3.5-inch D) and the shallow chassis of the iLX-W650 (1.9-inch D) occupies the same depth as a traditional 2-DIN chassis, resulting in an easy, hideaway bass solution that adds more power to the sound system without taking up space. The KTA-200M follows the same format as the KTA-450 4-Channel Power Pack Amplifier, in a compact size, easy installation, and overall power. Both amplifiers, while designed to “stack” behind the iLX-W650, or similar 2-DIN radio, can also be used as standalone solutions in vehicles that don’t have space for a traditional amplifier. the KTA-200M produces 400 watts with Alpine’s DPP technology. During powerful, or “dynamic,” passages of music, DPP will adapt to the needs of the music by adjusting the gain of the amplifier and delivering bursts of power that match the peak demands of the music. Alongside that is the new voltage adapting input circuit to maintain the maximum source signal level without clipping. General Features: Power Stack capable with the Alpine iLX-W650 compact mono subwoofer amplifier Alpine’s Class D Amplifier Circuit with DPP Dynamic Peak Power (DPP) technology adds a burst of power when needed CTA-2006 compliant 100W x 1 RMS @ 4Ω, Power Outputs 200W x 1 RMS @ 2Ω, Power Outputs 400W x 1 DPP @ 4Ω, Power Outputs Signal to Noise Ratio 85dB (ref. 1W into 4Ω) ≤0.1% THD+N (ref. 10W into 2Ω) Single-side 22-pin connector selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs RCA inputs (selectable, Low range=0.2-4V) Sound controls; Crossovers-Off/60Hz/80Hz/120Hz Linkwitz Riley LP Filter @ -24dB/Oct. (selectable); Input gain setting (variable) wiring, hardware, and fuse not included with amplifier Power Stack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver Authorized Dealer 1-year Warranty What is in the KTA-200M box: Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Four 8" Zip Ties Owner's Manual (English/ French/ Spanish) Warranty information Online product registration information FCC Compliance Statement KTA-200M Owner's Manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Mono and KTA-30FW 4-Channel Weather-Resistant Amplifiers - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, an Alpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack Amplifier, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2 Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch DAlpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-OhmsSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 300W x 1 D.P.P. (2, 14.4V, 1% THD+N) CTA-2006-B Specifications: 200W RMS x 1 (4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)Sound control: Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch inputAlpine KTA-30FW 4-Channel Weather Resistant Tough Power Pack AmplifierSpecifications: Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Weather resistant (IP66 rating) 150W x 4 D.P.P. (2/4, 14.4V, 1% THD+N) CTA-2006-B Specifications: 75W RMS x 4 (2/4, 14.4V, 1% THD+N) 82dB S/N (ref. 1W into 4) >0.05% THD OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier Alpine S-SB10V 10" Vented Loaded Halo Enclosure with Alpine KTA-30MW Weather-resistant Amplifier - This bundle includes an Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure, an Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms, a pry kit, and an Alpine cozy.Alpine S-SB10V Pre-Loaded S-Series 10-inch Subwoofer EnclosureAlpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers.This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure.Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the S-SB10V box: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on the subwoofer) Alpine KTA-30MW Mono Tough Power Pack Amplifier 200 RMS x 1 at 4-Ohms / 300 RMS x 1 at 2-Ohms The KTA-30MW measures just 9-3/16” (W) x 1-5/8” (H) x 3-3/4” (D), so its small footprint lets it fit where most amplifiers won’t, like under the dash or in the glove compartment, installed under the dash of a side-by-side, placed in the saddlebag of a motorcycle, or used in other places where space is an issue. General Features: Alpine KTA-30MW Class D Monoblock Weather Resistant Power Pack Amplifier 300 Watts RMS X 1 @ 4 Ohms Power Handling 600 Watts RMS X 1 @ 2 Ohms Power Handling CTA-2006 compliant Frequency Response: 20-400 Hz Total Harmonic Distortion (THD): <1% Signal to Noise Ratio: 83dB Variable Low Pass filter 50-400Hz @ -24dB/Oct. Variable Bass Boost (0-12 dB at 50 Hz) Fuse Rating: 25A Weather-resistant (IP66 rating) Dynamic Peak Power (D.P.P.) technology intelligently adjusts the gain to automatically adapt to musical needs Dimensions: 7” W x 3.5” H x 1.25” D Authorized Dealer 1-year Manufacturer's Warranty What is in the KTA-30MW box: Mono amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on other ends) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet KTA-30MW owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box Alpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers. This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure. Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D What is in the package: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V 10" 600W S-W10D4 Subwoofer Ported Sub Enclosure Box Alpine Amp Package Includes: (1) Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box (1) Alpine S-A60M 600-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D (1) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's Alpine S-SB10V Loaded 10" 600w S-W10D4 Subwoofer Ported Sub Enclosure Box Alpine Electronics of America, Inc. introduced a new sound system lineup for the Halo category that includes a 10-inch enclosure and remote bass knob. The enclosures are pre-loaded with S-Series and R-Series subwoofers. This sound system was designed to complement the Halo display in both power and performance for a premium sound experience. With the new modular design, customers can enjoy a single box design but have a flexible upgrade path. A single box can be used, or two enclosures can be linked together with an optional kit to create a dual sub enclosure. Enclosure Stacking Features Unique to Alpine, the subwoofer 10-inch is available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer the option to easily add more bass to their system. Optimized Performance The ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and overall great sound quality. The 10-inch enclosure is tuned to 36 Hz is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers. General Features: S-SB10V Pre-Loaded S-Series 10-inch Subwoofer Enclosure Includes S-W10D4 wired in parallel 600W RMS power handling 2Ω Impedance Ported enclosure design Frequency response: 28-200 Hz Vented enclosure tuning frequency: 36 Hz Dimensions 16-inch W x 12.6825-inch H x 14.5-inch D Alpine S-A60M 600-Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D S-Series amplifiers are your sound system’s workhorse. With unmatched reliability and budget-friendly prices, these amplifiers are the better choice in performance value. THE BETTER CHOICE IN PERFORMANCE VALUE Perfect for beginners and enthusiasts alike, the S-Series amplifiers have the technology to improve your music experience yet are still friendly on your wallet. Used in conjunction with our advanced S-Series speakers and subwoofers, they create a complete sound system that takes your in-vehicle music experience to the next level. SMALL BUT MIGHTY The S-Series amplifiers are designed to fit anywhere. Measuring at 8”, these amplifiers can be mounted under seats or behind panels. Though they sport a compact footprint on the outside, they produce impressive power on the inside. At 600 watts RMS, the S-A60M is a powerful partner to drive the versatile S-Series subwoofers. RELIABLE PERFORMANCE The S-Series amplifiers contain technology that was previously only available in our premium line up of amplifiers, the R- and X-Series models. The S-Series models are based on Alpine’s intelligent amplifier platform that ensures superior sound reproduction and precision imaging. With an improved heat sink, and protection circuit design that eliminates thermal shut-down, your music will keep playing no matter where your drive takes you. General Features: Alpine’s Class D Amplifier Circuit CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V ≤ 1% THD+N); 600W RMS x 1 (2ohm, 14.4V ≤ 1% THD+N) S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm) THD+N ≤ 0.03% (ref 1W info 4 ohm) Frequency Response: 10Hz-400Hz (+/-3 dB) Damping Factor: > 1000 Remote bass knob compatible (requires RUX-KNOB.2, sold separately) Absolute KIT4 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's General Features: Complete 4 Gauge Amplifier Kit Designed specifically for car audio systems up to 1000 watts Premium power and ground wire provides optimal power transfer Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier Terminals are gold-plated for excellent signal transfer For use in any car, truck, RV, or boat Authorized Internet Dealer 1-year Manufacturer's warranty Package Includes: 17 ft. of red 4 AWG high current power cable 3 ft. of black 4 AWG ground cable 15 ft. of RCA triple shielded interconnect audio cable with built in remote wire 20 ft. of 12 AWG OFC Speaker cable 20 ft. of 16 AWG remote turn-on wire 6 ft. of split loom tubing 1 Gold plated 80 AMP AGU fuse 1 4 AWG gold ring terminal 1 4 AWG water resistant inline fuse holder 2 Ring terminals 2 Spade terminals (4 gauge) 5 Spade terminals (14-16 gauge) 3 Self tapping screws 1 Rubber grommet 20 Black cable ties 2 Butt connectors (18-22 gauge) 1 Butt connector (4 gauge) ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov    

Alpine S-SB10V-BNDL Bass Boost Package Includes S-SB10V 10" ported enclosure, S-A60M amplifier, and RUX-KNOB.2 remote level control Everything you need This Alpine Bass Boost bundle gives you everything you need to add some solid bass to your car system. The package includes their S-SB10V subwoofer enclosure, the S-A60M amplifier, and the RUX-KNOB.2 remote level control. The S-SB10V Halo Series enclosure features their S-W10D4 10" subwoofer in a rugged MDF enclosure with black carpet covering, wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you thumping bass at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance. And when you're ready to expand your low end even more, you can add a second S-SB10V and link the enclosures together with their KTX-H10 linking kit (sold separately). Powerful amplification With 600 watts of power in a 8" x 8" x 2.5" package, the S-A60M amplifier is a perfect match for the enclosure. The amp includes Alpine's Enhanced Shutdown Performance technology to lower the output if the amp runs too hot. Instead of shutting down completely, it continues playing your music until it cools enough to return to full power. Its low-pass filter and adjustable bass boost let you dial in your sound. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. If you're using the speaker-level inputs, the amp senses an incoming signal and turns itself on, eliminating the need to run a turn-on wire back to your vehicle's receiver or fuse box. Control your sound The RUX-KNOB.2 remote level controller adjusts the amp's level from its set maximum volume all the way down to virtually "off." Since it adjusts level and not "bass boost," you'll maintain the same bass tone as you turn the volume up and down. A 16-foot connecting cable gives you plenty of length to run from the amp to the front of the vehicle. Product highlights: package includes Alpine S-SB10V Halo Series enclosure, S-A60M mono amplifier, and RUX-KNOB.2 remote level control S-SB10V Halo Series enclosure: S-W10D4 subwoofer ported enclosure power handling: 600 watts RMS frequency response: 28-200 Hz 2-ohm impedance enclosure dimensions: 16"W x 12.75"H x 15"D warranty: 1 year S-A60M mono amplifier: 600 watts RMS x 1 at 2 ohms variable low-pass filter (50-400 Hz, 24 dB/octave) variable bass boost (0-12 dB at 50 Hz) preamp and speaker-level inputs Remote Sensing automatic turn-on when using speaker-level inputs dimensions: 8.045"W x 2.28"H x 8.06"D warranty: 1 year RUX-KNOB.2 remote level control: adjusts gain from 0 to -12 dB 16' connection cable warranty: 1 year MFR # S-SB10V-BNDL What's in the box: Alpine S-SB10V: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on subwoofer) Alpine S-A60M: Mono subwoofer amplifier Two 30-amp ATO fuses (installed) Four 3/4" Screws 2mm Allen wrench Owner's manual (English/ French/ Spanish) Alpine Verification Certificate Warranty information Power supply note On-line product registration information Alpine RUX-KNOB.2: Remote Bass Level Control module 16.4' (5 meter) connecting cable (RJ-14 plugs on both ends) Four 1/2" Screws ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine S-SB10V-PWR Halo 10" Bass Package Includes S-SB10V linkable 10" ported sub enclosure and KTA-200M compact 200-watt mono amplifier Lively up your bass with this Alpine package Alpine combined two of their most forward-thinking products for this S-SB10V-PWR bass package: the KTA-200M power pack subwoofer amplifier and the S-SBV10 Halo Series 10" loaded ported sub enclosure. You get a propulsive pairing that'll fill your ride with the vibrant thump only solid bass can provide. Kicking compact amp Alpine's KTA-200M power pack subwoofer amplifier sends out up to 200 watts RMS to the sub from a chassis about the size of your hand. The amp uses Alpine's Dynamic Peak Power (DPP) technology to deliver a quick energy boost when needed, virtually doubling the amplifier's output power on musical peaks. PowerStack Installation The KTA-200M includes a PowerStack bracket for mounting the amp in your dash behind Alpine's shallow chassis iLX-W650 digital multimedia receiver. The combined depth of the receiver and amp is still less than 5", so it'll fit in a wide variety of vehicles. The receiver and sub amp together make a feature-filled and powerful sound system that you'll enjoy for many miles. Rugged Halo Series box and 10" sub The S-SB10V comes loaded with Alpine's S-W10D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance. Double the fun This Halo Series sub enclosure sounds great on its own, but when you want to expand your system, you can add a second Halo bass package to create a single two-speaker system with twice the power and double the impact. You can link two S-SB10V boxes using Alpine's KTX-H10 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look. Product highlights: package includes Alpine KTA-200M mono sub amp and S-SB10V ported enclosure with 10" subwoofer KTA-200M 200-watt compact amplifier: 200 watts RMS x 1 at 4 ohms or 2 ohms CTA-2006 compliant Dynamic Peak Power (DPP) technology adds a burst of power when needed selectable low-pass filter (60, 80, 120 Hz at 12 dB/octave) preamp and speaker-level inputs PowerStack bracket included for mounting amp behind Alpine iLX-W650 digital multimedia receiver (item #500ILXW650) wiring, hardware, and fuse not included with amplifier 12-gauge power and ground leads and a 20A fuse recommended dimensions: 7-3/4"W (with wiring) x 1-3/8"H x 3-9/16"D warranty: 1 year S-SB10V Halo Series 10" linkable ported subwoofer enclosure: loaded with Alpine's S-W10D4 subwoofer linkable to second S-SB10V enclosure with linking kit (sold separately) Kevlar-reinforced pulp cone with Santoprene rubber surround power handling: 600 watts RMS frequency response: 28-200 Hz 2-ohm impedance dimensions: 16"W x 12-3/4"H x 15"D warranty: 1 year MFR # S-SB10V-PWR What's in the box: Alpine S-SB10V: Ported enclosure loaded with one S-W10D4 subwoofer driver Rubber flange protector (installed on subwoofer) Alpine KTA-200M: Mono amplifier 12" Input/Output/Power harness 1 Head unit (iLX-W650) mounting bracket 2 Universal mounting brackets Four M5x6mm Allen head machine screws (3mm) Two M2.6x8mm Machine screws Four 3/8" Screws Four 8" Zip Ties Owner's Manual (English/ French/ Spanish) Warranty information Online product registration information Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.